Pull ext4 bugfixes from Ted Ts'o:
 "These changes contains a fix for overlayfs interacting with some
  (badly behaved) dentry code in various file systems.  These have been
  reviewed by Al and the respective file system mtinainers and are going
  through the ext4 tree for convenience.

  This also has a few ext4 encryption bug fixes that were discovered in
  Android testing (yes, we will need to get these sync'ed up with the
  fs/crypto code; I'll take care of that).  It also has some bug fixes
  and a change to ignore the legacy quota options to allow for xfstests
  regression testing of ext4's internal quota feature and to be more
  consistent with how xfs handles this case"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: ignore quota mount options if the quota feature is enabled
  ext4 crypto: fix some error handling
  ext4: avoid calling dquot_get_next_id() if quota is not enabled
  ext4: retry block allocation for failed DIO and DAX writes
  ext4: add lockdep annotations for i_data_sem
  ext4: allow readdir()'s of large empty directories to be interrupted
  btrfs: fix crash/invalid memory access on fsync when using overlayfs
  ext4 crypto: use dget_parent() in ext4_d_revalidate()
  ext4: use file_dentry()
  ext4: use dget_parent() in ext4_file_open()
  nfs: use file_dentry()
  fs: add file_dentry()
  ext4 crypto: don't let data integrity writebacks fail with ENOMEM
  ext4: check if in-inode xattr is corrupted in ext4_expand_extra_isize_ea()

Pull Ceph fix from Sage Weil:
 "This just fixes a few remaining memory allocations in RBD to use
  GFP_NOIO instead of GFP_ATOMIC"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: use GFP_NOIO consistently for request allocations

Pull virtio/qemu fixes from Michael S Tsirkin:
 "A couple of fixes for virtio and for the new QEMU fw cfg driver"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio: add VIRTIO_CONFIG_S_NEEDS_RESET device status bit
  MAINTAINERS: add entry for QEMU
  firmware: qemu_fw_cfg.c: hold ACPI global lock during device access
  virtio: virtio 1.0 cs04 spec compliance for reset
  qemu_fw_cfg: don't leak kobj on init error

Pull drm fixes from Dave Airlie:
 "This is mostly amdgpu/radeon fixes, and imx related fixes.

  There is also one one TTM fix, one nouveau fix, and one hdlcd fix.

  The AMD ones are some fixes for power management after suspend/resume
  one some GPUs, and some vblank fixes.

  The IMX ones are for more stricter plane checks and some cleanups.

  I'm off until Monday, so therre might be some fixes early next week if
  anyone missed me"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (34 commits)
  drm/nouveau/tegra: acquire and enable reference clock if needed
  drm/amdgpu: total vram size also reduces pin size
  drm/amd/powerplay: add uvd/vce dpm enabling flag default.
  drm/amd/powerplay: fix issue that resume back, dpm can't work on FIJI.
  drm/amdgpu: save and restore the firwmware cache part when suspend resume
  drm/amdgpu: save and restore UVD context with suspend and resume
  drm/ttm: use phys_addr_t for ttm_bus_placement
  drm: ARM HDLCD - fix an error code
  drm: ARM HDLCD - get rid of devm_clk_put()
  drm/radeon: Only call drm_vblank_on/off between drm_vblank_init/cleanup
  drm/amdgpu: fence wait old rcu slot
  drm/amdgpu: fix leaking fence in the pageflip code
  drm/amdgpu: print vram type rather than just DDR
  drm/amdgpu/gmc: use proper register for vram type on Fiji
  drm/amdgpu/gmc: move vram type fetching into sw_init
  drm/amdgpu: Set vblank_disable_allowed = true
  drm/radeon: Set vblank_disable_allowed = true
  drm/amd/powerplay: Need to change boot to performance state in resume.
  drm/amd/powerplay: add new Fiji function for not setting same ps.
  drm/amdgpu: check dpm state before pm system fs initialized.
  ...

The VIRTIO 1.0 specification added the DEVICE_NEEDS_RESET device status
bit in "VIRTIO-98: Add DEVICE_NEEDS_RESET".  This patch defines the
device status bit in the uapi header file so that both the kernel and
userspace applications can use it.

The bit is currently unused by the virtio guest drivers and vhost.
According to the spec "a good implementation will try to recover by
issuing a reset".  This is not attempted here because it requires
auditing the virtio drivers to ensure there are no resource leaks or
crashes if the device needs to be reset mid-operation.

See "2.1 Device Status Field" in the VIRTIO 1.0 specification for
details.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Gabriel merged support for QEMU FW CFG interface, but there's apparently
no official maintainer. It's also possible that this will grow more
interfaces in future.  I'll happily co-maintain it and handle pull
requests together with the rest of the PV stuff I maintain.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>

Allowing for the future possibility of implementing AML-based
(i.e., firmware-triggered) access to the QEMU fw_cfg device,
acquire the global ACPI lock when accessing the device on behalf
of the guest-side sysfs driver, to prevent any potential race
conditions.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

The spec says: after writing 0 to device_status, the driver MUST wait
for a read of device_status to return 0 before reinitializing the
device.

Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

If platform_driver_register fails, we should
cleanup fw_cfg_top_ko before exiting.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>

Lots of misc bug fixes for radeon and amdgpu and one for ttm.
- fix vram info fetching on Fiji and unposted boards
- additional vblank fixes from the conversion to drm_vblank_on/off
- UVD dGPU suspend and resume fixes
- lots of powerplay fixes
- fix a fence leak in the pageflip code
- ttm fix for platforms where CPU is 32 bit, but physical addresses are >32bits

* 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux: (21 commits)
  drm/amdgpu: total vram size also reduces pin size
  drm/amd/powerplay: add uvd/vce dpm enabling flag default.
  drm/amd/powerplay: fix issue that resume back, dpm can't work on FIJI.
  drm/amdgpu: save and restore the firwmware cache part when suspend resume
  drm/amdgpu: save and restore UVD context with suspend and resume
  drm/ttm: use phys_addr_t for ttm_bus_placement
  drm/radeon: Only call drm_vblank_on/off between drm_vblank_init/cleanup
  drm/amdgpu: fence wait old rcu slot
  drm/amdgpu: fix leaking fence in the pageflip code
  drm/amdgpu: print vram type rather than just DDR
  drm/amdgpu/gmc: use proper register for vram type on Fiji
  drm/amdgpu/gmc: move vram type fetching into sw_init
  drm/amdgpu: Set vblank_disable_allowed = true
  drm/radeon: Set vblank_disable_allowed = true
  drm/amd/powerplay: Need to change boot to performance state in resume.
  drm/amd/powerplay: add new Fiji function for not setting same ps.
  drm/amdgpu: check dpm state before pm system fs initialized.
  drm/amd/powerplay: notify amdgpu whether dpm is enabled or not.
  drm/amdgpu: Not support disable dpm in powerplay.
  drm/amdgpu: add an cgs interface to notify amdgpu the dpm state.
  ...

Let's see if anybody even notices.  I doubt anybody uses this, and it
does expose addresses that should be randomized, so let's just remove
the code.  It's old and traditional, and it used to be cute, but we
should have removed this long ago.

If it turns out anybody notices and this breaks something, we'll have to
revert this, and maybe we'll end up using other approaches instead
(using %pK or similar).  But removing unnecessary code is always the
preferred option.
Noted-by: Emrah Demir <ed@abdsec.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull rdma fixes from Doug Ledford:
 "I'm back from PTO.  These issues cropped up while I was gone and are
  simple fixes.  I'll have more after I've caught up, but I wanted to
  get these in quick.

  Two minor fixes for 4.6-rc2:

   - Fix mlx5 build error when on demand paging is not enabled

   - Fix possible uninit variable in new i40iw driver"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  i40iw: avoid potential uninitialized variable use
  IB/mlx5: fix VFs callback function prototypes

gcc finds that the i40iw_make_cm_node() function in the recently added
i40iw driver uses an uninitilized variable as an index into an array
if CONFIG_IPV6 is disabled and the driver uses IPv6 mode:

drivers/infiniband/hw/i40iw/i40iw_cm.c: In function 'i40iw_make_cm_node':
drivers/infiniband/hw/i40iw/i40iw_cm.c:2206:52: error: 'arpindex' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  ether_addr_copy(cm_node->rem_mac, iwdev->arp_table[arpindex].mac_addr);

As far as I can tell, this code path can not be used because the ipv4
variable is always set with CONFIG_IPV6 is disabled, but it's better
to be sure and prevent the undefined behavior, as well as shut up
that warning in a proper way.

This adds an 'else' clause for the case we get the warning about,
causing the function to return an error in a controlled way.
To avoid adding extra mess with combined io()/#ifdef clauses,
I'm also converting the existing #ifdef into a more readable
if(IS_ENABLED()) check.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: f27b4746 ("i40iw: add connection management code")
Acked-by: Mustafa Ismail <Mustafa.ismail@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The previous patch that added a couple of callback functions put
the declarations inside of an #ifdef CONFIG_INFINIBAND_ON_DEMAND_PAGING,
which causes the build to fail if that option is disabled:

drivers/infiniband/hw/mlx5/main.c: In function 'mlx5_ib_add':
drivers/infiniband/hw/mlx5/main.c:2358:31: error: 'mlx5_ib_get_vf_config' undeclared (first use in this function)

This moves the four declarations below the #ifdef section so they
are always available.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: eff901d3 ("IB/mlx5: Implement callbacks for manipulating VFs")
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Just a single fix to prevent GM20B systems hanging at boot.

* 'linux-4.6' of git://github.com/skeggsb/linux:
  drm/nouveau/tegra: acquire and enable reference clock if needed

GM20B requires an extra clock compared to GK20A. Add that information
into the platform data and acquire and enable this clock if necessary.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

arm hdlcd fix.
* 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld:
  drm: ARM HDLCD - fix an error code
  drm: ARM HDLCD - get rid of devm_clk_put()

imx-drm: stricter plane parameter checking, dw_hdmi-imx and dmfc fixes

- Check whether plane parameters comply with IPU IDMAC limitations and
  fix planar YUV 4:2:0 U/V offsets and stride
- Cleanup encoder in dw_hdmi-imx bind error path and
  remove a superfluous platform_set_drvdata in dw_hdmi-imx
- DMFC setup fixes: lock the ipu_dmfc_init_channel function against
  concurrent use, rename it to ipu_dmfc_config_wait4eot, and call
  it after the FIFO size has been determined.

* tag 'imx-drm-next-2016-04-01' of git://git.pengutronix.de/git/pza/linux:
  drm/imx: Don't set a gamma table size
  drm/imx: ipuv3-plane: Configure DMFC wait4eot bit after slots are determined
  gpu: ipu-v3: ipu-dmfc: Rename ipu_dmfc_init_channel to ipu_dmfc_config_wait4eot
  gpu: ipu-v3: ipu-dmfc: Make function ipu_dmfc_init_channel() return void
  gpu: ipu-v3: ipu-dmfc: Protect function ipu_dmfc_init_channel() with mutex
  drm/imx: dw_hdmi: Don't call platform_set_drvdata()
  drm/imx: dw_hdmi: Call drm_encoder_cleanup() in error path
  drm/imx: ipuv3-plane: fix planar YUV 4:2:0 support
  drm/imx: ipuv3-plane: Add more thorough checks for plane parameter limitations
  gpu: ipu-cpmem: modify ipu_cpmem_set_yuv_planar_full for better control

Pull KVM fixes from Paolo Bonzini:
 "Miscellaneous bugfixes.

  The ARM and s390 fixes are for new regressions from the merge window,
  others are usual stable material"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  compiler-gcc: disable -ftracer for __noclone functions
  kvm: x86: make lapic hrtimer pinned
  s390/mm/kvm: fix mis-merge in gmap handling
  kvm: set page dirty only if page has been writable
  KVM: x86: reduce default value of halt_poll_ns parameter
  KVM: Hyper-V: do not do hypercall userspace exits if SynIC is disabled
  KVM: x86: Inject pending interrupt even if pending nmi exist
  arm64: KVM: Register CPU notifiers when the kernel runs at HYP
  arm64: kvm: 4.6-rc1: Fix VTCR_EL2 VS setting

Pull spi fixes from Mark Brown:
 "A couple of driver specific fixes here that came in since the merge
  window plus one core fix for locking in cases where a client driver
  grabs a lock on the whole bus for an extended series of operations
  that was introduced by the changes to support accelerated flash
  operations"

* tag 'spi-fix-v4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: rockchip: fix probe deferral handling
  spi: omap2-mcspi: fix dma transfer for vmalloced buffer
  spi: fix possible deadlock between internal bus locks and bus_lock_flag
  spi: imx: Fix possible NULL pointer deref
  spi: imx: only do necessary changes to ECSPIx_CONFIGREG
  spi: rockchip: Spelling s/divsor/divisor/

As of 5a60e876, RBD object request
allocations are made via rbd_obj_request_create() with GFP_NOIO.
However, subsequent OSD request allocations in rbd_osd_req_create*()
use GFP_ATOMIC.

With heavy page cache usage (e.g. OSDs running on same host as krbd
client), rbd_osd_req_create() order-1 GFP_ATOMIC allocations have been
observed to fail, where direct reclaim would have allowed GFP_NOIO
allocations to succeed.

Cc: stable@vger.kernel.org # 3.18+
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Neil Brown <neilb@suse.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

Pull pin control fixes from Linus Walleij:
 "Here is a set of pin control fixes for the v4.6 series.

  A bit bigger than what I hoped for, but all fixes are confined to
  drivers, a few of them also targeted to stable.

  Summary:

   - On Super-H PFC (Renesas) controllers: only use dummies on legacy
     systems.  This fixes a serious ethernet regression on a Renesas
     board.
   - Pistachio: Fix errors in the pin table.
   - Allwinner SunXi: fix the external interrupts to work.
   - Intel: fix so the high level interrupts start working, and fix a
     spurious interrupt issue.
   - Qualcomm ipq4019: fix the number of GPIOs provided (bump to 100),
     correct register offsets and handle GPIO mode properly.
   - Revert the revert on the revert so that Xway has a .to_irq()
     callback again.
   - Minor fixes to errorpaths and debug info.
   - A MAINTAINERS update"

* tag 'pinctrl-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  Revert "Revert "pinctrl: lantiq: Implement gpio_chip.to_irq""
  pinctrl: qcom: ipq4019: fix register offsets
  pinctrl: qcom: ipq4019: fix the function enum for gpio mode
  pinctrl: qcom: ipq4019: set ngpios to correct value
  pinctrl: nomadik: fix pull debug print inversion
  MAINTAINERS: pinctrl: samsung: Add two new maintainers
  pinctrl: intel: implement gpio_irq_enable
  pinctrl: intel: make the high level interrupt working
  pinctrl: freescale: imx: fix bogus check of of_iomap() return value
  pinctrl: sunxi: Fix A33 external interrupts not working
  pinctrl: pistachio: fix mfio84-89 function description and pinmux.
  pinctrl: sh-pfc: only use dummy states for non-DT platforms

Pull media fixes from Mauro Carvalho Chehab:
 "Some bug fixes on au0828 and snd-usb-audio:

   - the au0828+snd-usb-audio MC patch broke several things and produced
     some race conditions.  Better to revert the patches, and re-work on
     them for a next version

   - fix a regression at tuner disable links logic

   - properly handle dev_state as a bitmask"

* tag 'media/v4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] Revert "[media] media: au0828 change to use Managed Media Controller API"
  [media] Revert "[media] sound/usb: Use Media Controller API to share media resources"
  [media] au0828: Fix dev_state handling
  [media] au0828: fix au0828_v4l2_close() dev_state race condition
  [media] media: au0828 fix to clear enable/disable/change source handlers
  [media] v4l2-mc: cleanup a warning
  [media] au0828: disable tuner links and cache tuner/decoder

-ftracer can duplicate asm blocks causing compilation to fail in
noclone functions.  For example, KVM declares a global variable
in an asm like

    asm("2: ... \n
         .pushsection data \n
         .global vmx_return \n
         vmx_return: .long 2b");

and -ftracer causes a double declaration.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: stable@vger.kernel.org
Cc: kvm@vger.kernel.org
Reported-by: Linda Walsh <lkml@tlinx.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When a vCPU runs on a nohz_full core, the hrtimer used by
the lapic emulation code can be migrated to another core.
When this happens, it's possible to observe milisecond
latency when delivering timer IRQs to KVM guests.

The huge latency is mainly due to the fact that
apic_timer_fn() expects to run during a kvm exit. It
sets KVM_REQ_PENDING_TIMER and let it be handled on kvm
entry. However, if the timer fires on a different core,
we have to wait until the next kvm exit for the guest
to see KVM_REQ_PENDING_TIMER set.

This problem became visible after commit 9642d18e. This
commit changed the timer migration code to always attempt
to migrate timers away from nohz_full cores. While it's
discussable if this is correct/desirable (I don't think
it is), it's clear that the lapic emulation code has
a requirement on firing the hrtimer in the same core
where it was started. This is achieved by making the
hrtimer pinned.

Lastly, note that KVM has code to migrate timers when a
vCPU is scheduled to run in different core. However, this
forced migration may fail. When this happens, we can have
the same problem. If we want 100% correctness, we'll have
to modify apic_timer_fn() to cause a kvm exit when it runs
on a different core than the vCPU. Not sure if this is
possible.

Here's a reproducer for the issue being fixed:

 1. Set all cores but core0 to be nohz_full cores
 2. Start a guest with a single vCPU
 3. Trace apic_timer_fn() and kvm_inject_apic_timer_irqs()

You'll see that apic_timer_fn() will run in core0 while
kvm_inject_apic_timer_irqs() runs in a different core. If
you get both on core0, try running a program that takes 100%
of the CPU and pin it to core0 to force the vCPU out.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

commit 1e133ab2 ("s390/mm: split arch/s390/mm/pgtable.c") dropped
some changes from commit a3a92c31 ("KVM: s390: fix mismatch
between user and in-kernel guest limit") - this breaks KVM for some
memory sizes (kvm-s390: failed to commit memory region) like
exactly 2GB.

Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'linux-kselftest-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "This update for Kselftest contains seccomp fixes"

* tag 'linux-kselftest-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftest/seccomp: Fix the seccomp(2) signature
  selftest/seccomp: Fix the flag name SECCOMP_FILTER_FLAG_TSYNC

Pull MIPS fixes from Ralf Baechle:
 "This is the first round of MIPS fixes for 4.6:

   - Fix spelling mistakes all over arch/mips
   - Provide __bswapsi2 so XZ kernel compression will build with older GCC
   - ATH79 clock fixes.
   - Fix clock-rated copy-paste erros in ATH79 DTS.
   - Fix gisb-arb compatible string for 7435 BMIPS
   - Enable NAND and UBIFS support in CI20.
   - Fix BUG() assertion caused by inapropriate smp_processor_id() use.
   - Fix exception handling issues for the sake of debuggers
   - Fix the last remaining instance of irq_to_gpio in the db1xxx_ss PCMCIA code
   - Fix MSA unaligned load failures
   - Panic if kernel is configured for a not TLB-supported page size
   - Bail out on unsupported relocs in modules.
   - Partial fix for Qemu breakage after recent IPI rewrite
   - Wire up the preadv2 and pwrite2 syscalls
   - Fix the ar724x clock calculation"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: traps.c: Verify the ISA for microMIPS RDHWR emulation
  MIPS: BMIPS: Fix gisb-arb compatible string for 7435
  MIPS: Bail on unsupported module relocs
  MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: use "ref" for reference clock name
  MIPS: ath79: Fix the ar913x reference clock rate
  MIPS: ath79: Fix the ar724x clock calculation
  dt-bindings: clock: qca,ath79-pll: fix copy-paste typos
  MIPS: traps: Correct the SIGTRAP debug ABI in `do_watch' and `do_trap_or_bp'
  FIRMWARE: Broadcom: Fix grammar of warning messages in bcm47xx_sprom.c.
  MIPS: ci20: Enable NAND and UBIFS support in defconfig.
  MIPS: Fix misspellings in comments.
  MIPS: tlb-r4k: panic if the MMU doesn't support PAGE_SIZE
  MIPS: zboot: Remove copied source files on clean
  MIPS: zboot: Fix the build with XZ compression on older GCC versions
  MIPS: Wire up preadv2 and pwrite2 syscalls.
  MIPS: cpu_name_string: Use raw_smp_processor_id().
  pcmcia: db1xxx_ss: fix last irq_to_gpio user
  MIPS: Fix MSA ld unaligned failure cases
  MIPS: Fix broken malta qemu

Pull xen fixes from David Vrabel:
 "Regression and bug fixes for 4.6-rc2:

   - safely migrate event channels between CPUs
   - fix CPU hotplug
   - maintainer changes"

* tag 'for-linus-4.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  MAINTAINERS: xen: Konrad to step down and Juergen to pick up
  xen/events: Mask a moving irq
  Xen on ARM and ARM64: update MAINTAINERS info
  xen/x86: Call cpu_startup_entry(CPUHP_AP_ONLINE_IDLE) from xen_play_dead()
  xen/apic: Provide Xen-specific version of cpu_present_to_apicid APIC op

These should be set by default otherwise the UVD/VCE performance
won't be optimal.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

and revert fix following it accordingly

Revert "drm/amdgpu: stop trying to suspend UVD sessions v2"
Revert "drm/amdgpu: fix the UVD suspend sequence order"
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes ttm on platforms like PPC460 where the CPU
is in 32-bit mode, but the physical addresses are
>32 bits.

Extracted from a patch by Hans Verkuil.
Tested-by: Julian Margetson <runaway@candw.ms>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Julian Margetson <runaway@candw.ms>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull quota fixes from Jan Kara:
 "Fixes for oopses when the new quotactl gets used with quotas disabled"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ocfs2: Fix Q_GETNEXTQUOTA for filesystem without quotas
  quota: Handle Q_GETNEXTQUOTA when quota is disabled

Pull f2fs fixes from Jaegeuk Kim.

* tag 'f2fs-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: retrieve IO write stat from the right place
  f2fs crypto: fix corrupted symlink in encrypted case
  f2fs: cover large section in sanity check of super

In commit e4570897 ("drm/dp-helper: Move the legacy helpers to
gma500") the legacy i2c helpers were moved to the only remaining user of
them, the gma500 driver.  Together with that move, i2c_dp_aux_add_bus()
was marked deprecated and started warning about its remaining use.

It's now been a year and a half of annoying warning, and apparently
nobody cares enough about gma500 to try to move it along to the more
modern models.

Get rid of the warning - if even the gma500 people don't care enough,
then they should certainly not spam other innocent developers with a
warning that might hide other, much more real issues.

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge PAGE_CACHE_SIZE removal patches from Kirill Shutemov:
 "PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
  ago with promise that one day it will be possible to implement page
  cache with bigger chunks than PAGE_SIZE.

  This promise never materialized.  And unlikely will.

  Let's stop pretending that pages in page cache are special.  They are
  not.

  The first patch with most changes has been done with coccinelle.  The
  second is manual fixups on top.

  The third patch removes macros definition"

[ I was planning to apply this just before rc2, but then I spaced out,
  so here it is right _after_ rc2 instead.

  As Kirill suggested as a possibility, I could have decided to only
  merge the first two patches, and leave the old interfaces for
  compatibility, but I'd rather get it all done and any out-of-tree
  modules and patches can trivially do the converstion while still also
  working with older kernels, so there is little reason to try to
  maintain the redundant legacy model.    - Linus ]

* PAGE_CACHE_SIZE-removal:
  mm: drop PAGE_CACHE_* and page_cache_{get,release} definition
  mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usage
  mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros

All users gone.  We can remove these macros.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>