- 15 Jun, 2023 29 commits
-
-
Krzysztof Kozlowski authored
Referenced nvmem.yaml schema already defines address/size-cells, so remove redundant entries. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Message-ID: <20230611140330.154222-19-srinivas.kandagatla@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Krzysztof Kozlowski authored
Referenced nvmem.yaml schema already defines address/size-cells, so remove redundant entries. Signed-off-by:
-
Krzysztof Kozlowski authored
Referenced nvmem.yaml schema already defines address/size-cells, so remove redundant entries. Signed-off-by:
-
Krzysztof Kozlowski authored
Referenced nvmem.yaml schema already defines address/size-cells, so remove redundant entries. Signed-off-by:
-
Krzysztof Kozlowski authored
Referenced nvmem.yaml schema already defines address/size-cells, so remove redundant entries and use unevaluatedProperties: false. Signed-off-by:
-
Cristian Ciocaltea authored
Add support for the OTP memory device found on the Rockchip RK3588 SoC. While here, remove the unnecessary 'void *' casts in the OF device ID table. Co-developed-by:
Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by:
Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Tested-by:
Vincent Legoll <vincent.legoll@gmail.com> Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Cristian Ciocaltea authored
Enhance error handling in the probe function by making use of dev_err_probe(), which ensures the error code is always printed, in addition to the specified error message. Signed-off-by:
-
Cristian Ciocaltea authored
In preparation to support new Rockchip OTP memory devices having specific reset configurations, switch devm_reset_control_get() to devm_reset_control_array_get_exclusive(). Signed-off-by:
-
Cristian Ciocaltea authored
In preparation to support additional Rockchip OTP memory devices with different register layout, generalize rockchip_otp_wait_status() to accept a new parameter for specifying the offset of the status register. Signed-off-by:
-
Cristian Ciocaltea authored
In preparation to support new Rockchip OTP memory devices with different clock configurations and register layout, extend rockchip_data struct with the related members: clks, num_clks, reg_read. Additionally, to avoid managing redundant driver data, drop num_clks member from rockchip_otp struct and update all references to point to the equivalent member in rockchip_data. Signed-off-by:
-
Cristian Ciocaltea authored
Document the OTP memory found on Rockchip RK3588 SoC. Since RK3588 uses different clocks & resets configurations than PX30 / RK3308, provide the required changes in the binding to be able to handle both variants. Signed-off-by:
-
Cristian Ciocaltea authored
Convert the Rockchip OTP memory bindings to dt-schema. Signed-off-by:
-
Ivan T. Ivanov authored
On RPi4 the bootloader[1] will copy the binary public key blob (if present) into memory location specified by this node, for use by the OS. [1] https://www.raspberrypi.com/documentation/computers/configuration.html#nvmem-nodesSigned-off-by:
Ivan T. Ivanov <iivanov@suse.de> Acked-by:
-
Rafał Miłecki authored
1. Parse ASCII MAC format into byte based 2. Calculate relative addresses based on index argument Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
-
Rafał Miłecki authored
Broadcom's NVRAM contains MACs for Ethernet interfaces. Those MACs are usually base addresses that are also used for calculating other MACs. For example if a router vendor decided to use gmac0 it most likely programmed NVRAM of each unit with a proper "et0macaddr" value. That is a base. Ethernet interface is usually connected to switch port. Switch usually includes few LAN ports and a WAN port. MAC of WAN port gets calculated as relative address to the interface one. Offset varies depending on device model. Wireless MACs may also need to be calculated using relevant offsets. To support all those scenarios let MAC NVMEM cells be referenced with an index specifying MAC offset. Disallow additionalProperties while at it. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Alexander Stein authored
Not just i.MX8M, but all i.MX6/7 (and subtypes) need to reverse the MAC address read from fuses. Exceptions are i.MX6SLL and i.MX7ULP which do not support ethernet at all. Fixes: d0221a78 ("nvmem: imx-ocotp: add support for post processing") Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Tested-by: Richard Leitner <richard.leitner@skidata.com> # imx6q Signed-off-by:
-
Tom Rix authored
smatch reports drivers/nvmem/imx-ocotp.c:599:21: warning: symbol 'imx_ocotp_layout' was not declared. Should it be static? This variable is only used in one file so should be static. Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
Yi Yingao authored
Smatch reports: drivers/nvmem/sunplus-ocotp.c:205 sp_ocotp_probe() warn: 'otp->clk' from clk_prepare() not released on lines: 196. In the function sp_ocotp_probe(struct platform_device *pdev), otp->clk may not be released before return. To fix this issue, using function clk_unprepare() to release otp->clk. Fixes: 8747ec2e ("nvmem: Add driver for OCOTP in Sunplus SP7021") Signed-off-by:
Yi Yingao <m202271736@hust.edu.cn> Reviewed-by:
Dongliang Mu <dzm91@hust.edu.cn> Message-ID: <20230509085237.5917-1-m202271736@hust.edu.cn> Signed-off-by:
-
Abhijit Gangurde authored
Replace custom mcdi logging for send and receive requests with dynamic debug method print_hex_dump_debug(). Signed-off-by:
Abhijit Gangurde <abhijit.gangurde@amd.com> Message-ID: <20230613084318.27996-1-abhijit.gangurde@amd.com> Signed-off-by:
-
Nipun Gupta authored
The devices on cdx could be bound to drivers with the device DMA managed by kernel drivers or user-space applications. As multiple devices can be placed in the same IOMMU group, the DMA on these devices must either be entirely under kernel control or userspace control. Fix the CDX bus driver to acknowlege the driver_managed_dma flag and call the appropriate iommu APIs. Fixes: 2959ab24 ("cdx: add the cdx bus driver") Signed-off-by:
Nipun Gupta <nipun.gupta@amd.com> Reported-by:
Alex Williamson <alex.williamson@redhat.com> Closes: https://lore.kernel.org/lkml/20230524134831.28dc97e2.alex.williamson@redhat.com/Reviewed-by:
Nikhil Agarwal <nikhil.agarwal@amd.com> Message-ID: <20230605131009.6869-1-nipun.gupta@amd.com> Signed-off-by:
-
Julien Panis authored
This patch adds an example showing how to use PFSM devices from a userspace application. The PMIC is armed to be triggered by a RTC alarm to execute state transition. Signed-off-by:
Julien Panis <jpanis@baylibre.com> Message-ID: <20230511095126.105104-7-jpanis@baylibre.com> Signed-off-by:
-
Julien Panis authored
This patch adds documentation for the TPS6594 PFSM driver. The PFSM controls the operational states of the TPS6594 PMIC. Depending on the operational mode, some power domain networks remain energized while others can be off. Signed-off-by:
-
Julien Panis authored
This PFSM controls the operational modes of the PMIC: - STANDBY and LP_STANDBY, - ACTIVE state, - MCU_ONLY state, - RETENTION state, with or without DDR and/or GPIO retention. Depending on the current operational mode, some voltage domains remain energized while others can be off. This PFSM is also used to trigger a firmware update, and provides R/W access to device registers. See Documentation/misc-devices/tps6594-pfsm.rst for more information. Signed-off-by:
-
Julien Panis authored
This patch adds support for TPS6594 ESM (Error Signal Monitor). This device monitors the SoC error output signal at its nERR_SOC input pin. In error condition, ESM toggles its nRSTOUT_SOC pin to reset the SoC. Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'ib-mfd-tps6594-core-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into char-misc-next Immutable branch containing TPS6594 core (MFD) support due for the v6.5 merge window We want this due to patches requiring this mfd support. Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next William writes: First set of Counter updates for the 6.5 cycle Biggest changes in this set include the introduction of a new Intel 8254 interface library module and the refactoring of the existing 104-quad-8 modules to migrate it to the regmap API. Some other minor cleanups touching tools/counter and stm32-timer-cnt are also present. Changes * 104-quad-8 - Remove reference in Kconfig to 25-bit counter value - Utilize bitfield access macros - Refactor to buffer states for CMR, IOR, and IDR - Utilize helper functions to handle PR, FLAG and PSC - Migrate to the regmap API * i8254 - Introduce the Intel 8254 interface library module * stm32-timer-cnt - Reset TIM_TISEL to its default value in probe * tools/counter - Add .gitignore - Remove lingering 'include' directories on make clean * tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter: counter: i8254: Introduce the Intel 8254 interface library module counter: 104-quad-8: Migrate to the regmap API counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR counter: 104-quad-8: Utilize bitfield access macros tools/counter: Makefile: Remove lingering 'include' directories on make clean tools/counter: Add .gitignore counter: stm32-timer-cnt: Reset TIM_TISEL to its default value in probe counter: 104-quad-8: Remove reference in Kconfig to 25-bit counter value
-
Greg Kroah-Hartman authored
Merge tag 'fpga-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next Xu writes: FPGA Manager changes for 6.5-rc1 DFL: - Krzysztof's change constifies pointers to hwmon_channel_info Xilinx: - Alfonso's change ensures proper reprograming (xCAP) interface switch All patches have been reviewed on the mailing list, and have been in the last linux-next releases (as part of our for-next branch). Signed-off-by:
Xu Yilun <yilun.xu@intel.com> * tag 'fpga-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga: fpga: zynq-fpga: Ensure proper xCAP interface switch fpga: dfl-fme: constify pointers to hwmon_channel_info
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO new device support, features and cleanup for the 6.5 cycle. New device support - honeywell,mprls0025pa * New driver and dt-bindings for this series of pressure sensors. - invensense,mpu6050 * Add support for ICM 20600 IMU (ID, bindings and device data). - melexis,mlx90614 * Add support for mlx90615 Infra Red Thermometer after driver cleanup and refactoring to support the differences in this device. - renesas,x9250 * New driver and bindings for this quad potentiometer. - rockchip,saradc * Add support for RK3588. Also included is a bunch of refactoring and cleanup for that driver. - rohm,bu27008 * New driver bindings etc for this 5 photodiode color sensor. - st,lsm9ds0/st,st-sensors * ID added for LSM303D accelerometer and magnetometer including ACPI binding. - ti,opt4001 * New driver and bindings for this ambient light sensor. Features - core * Introduce iio_validate_own_trigger() for cases where a driver can only consumer a trigger it registered (detected via same parent device). Use it in the kionix,kx022a driver and new rohm,by27008 driver. - dynaimage,al3320a * ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices. - kionix,kx002a * Enable asynchronous probe. - rohm,bu27034 * Enable asynchronous probe. - ti,tmp006 * Explicit support for DT including binding documentation. Cleanups, minor fixes and misc improvements. - treewide * Switch I2C drivers from probe_new() back to probe() - part of the long process of getting rid of a parameter from probe() * Various whitespace and typo fixes not otherwise called out. - core * industrialio-buffer,Style cleanup. * Add documentation to extend_name field of struct iio_chan_spec to direct people using it towards the label infrastructure instead. extend_name was a design mistake a long time back so directly people away from it may be useful. - adi,ad7606 * Add HAS_IOPORT dependency to prepare for some Kconfig changes. - bosch,bma400 * Drop pointless print of ret in a dev_err_probe() message. - invensense,icm42600 * Rework timestamp handling to reduce jitter. - mediatek,mt7986-auxdac * Add DT binding for this part. - qcom,spmi-vadc * Allow for 1/16th prescaling used on a few devices. * Various changes to channel labeling and naming, including dropping use of fwnode_name which generates odd channel names. Small ABI change as a result, but not thought to be a problem for users of this platform. - st,lsm6dsx * dt-binding: Use common schema for mount-matrix via a reference. - st,stm32 * Add a debug print for when legacy channel config is used. - ti,palmas-adc * Drop unused i2c.h include. * tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (59 commits) dt-bindings: iio: rockchip: Fix 'oneOf' condition failed warning dt-bindings: iio: afe: voltage-divider: Spelling s/curcuit/circuit/ dt-bindings: iio: adc: Add rockchip,rk3588-saradc string iio: adc: rockchip_saradc: Use dev_err_probe iio: adc: rockchip_saradc: Match alignment with open parenthesis iio: adc: rockchip_saradc: Use of_device_get_match_data iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled iio: adc: rockchip_saradc: Add support for RK3588 iio: adc: rockchip_saradc: Add callback functions iio: temperature: tmp006: Add OF device matching support dt-bindings: iio: temperature: Add support for tmp006 staging: iio: Switch i2c drivers back to use .probe() iio: amplifiers: ad8366 Fix whitespace issue iio: imu: inv_icm42600: avoid frequent timestamp jitter MAINTAINERS: Add ROHM BU27008 iio: light: ROHM BU27008 color sensor iio: kx022a: Use new iio_validate_own_trigger() iio: trigger: Add simple trigger_validation helper dt-bindings: iio: light: ROHM BU27008 iio: mlx90614: Add MLX90615 support ...
-
Greg Kroah-Hartman authored
Merge tag 'iio-fixes-for-6.4b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 2nd set of IIO fixes for the 6.4 cycle. Given how late this pull request is, I'm expecting these to get queued up for the 6.5 merge window. - adi,ad7192 * Fix a null pointer as spi_set_drvdata() is no longer called. * Fix wrong check prior to using internal clock. * Fix dt-binding to make it clear the voltage reference is required. - adi,ad74413 * DIN_SINK should not be set for functions other than digital inputs. Enforce that in the driver. - amlogic,meson-saradc * Fix clock divider mask length - affects only meson 8 family. - freescale,fxls8962af * Fix endian type and shift of channels to match with default device setup. * Narrow errata handling to FXLS8962AF only as doesn't affect other devices supported by this driver. * tag 'iio-fixes-for-6.4b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: meson saradc: fix clock divider mask length iio: accel: fxls8962af: errata bug only applicable for FXLS8962AF iio: accel: fxls8962af: fixup buffer scan element type dt-bindings: iio: ad7192: Add mandatory reference voltage source iio: adc: ad7192: Fix internal/external clock selection iio: adc: ad7192: Fix null ad7192_state pointer access iio: addac: ad74413: don't set DIN_SINK for functions other than digital input
-
- 10 Jun, 2023 3 commits
-
-
Shreeya Patel authored
rk3588-saradc isn't compatible with the rk3399-saradc variant, hence, fix the following dtbs_check warning for 'oneOf' condition failure. DTC_CHK arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtb /home/shreeya/linux/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtb: saradc@fec10000: compatible: 'oneOf' conditional failed, one must be fixed: ['rockchip,rk3588-saradc'] is too short 'rockchip,saradc' was expected 'rockchip,rk3066-tsadc' was expected 'rockchip,rk3399-saradc' was expected Fixes: 2daf2ae9 ("dt-bindings: iio: adc: Add rockchip,rk3588-saradc string") Signed-off-by:
Shreeya Patel <shreeya.patel@collabora.com> Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230610143601.173307-1-shreeya.patel@collabora.comSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
George Stark authored
According to the datasheets of supported meson SoCs length of ADC_CLK_DIV field is 6-bit. Although all supported SoCs have the register with that field documented later SoCs use external clock rather than ADC internal clock so this patch affects only meson8 family (S8* SoCs). Fixes: 3adbf342 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs") Signed-off-by:
George Stark <GNStark@sberdevices.ru> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230606165357.42417-1-gnstark@sberdevices.ru Cc: <stable@vger.kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
Fix a misspelling of "circuit". Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/a8597e54b55dedc51025fe3073d25ef0d659d0dc.1686045793.git.geert+renesas@glider.beSigned-off-by:
-
- 08 Jun, 2023 1 commit
-
-
William Breathitt Gray authored
Exposes consumer library functions providing support for interfaces compatible with the venerable Intel 8254 Programmable Interval Timer (PIT). The Intel 8254 PIT first appeared in the early 1980s and was used initially in IBM PC compatibles. The popularity of the original Intel 825x family of chips led to many subsequent variants and clones of the interface in various chips and integrated circuits. Although still popular, interfaces compatible with the Intel 8254 PIT are nowdays typically found embedded in larger VLSI processing chips and FPGA components rather than as discrete ICs. A CONFIG_I8254 Kconfig option is introduced by this patch. Modules wanting access to these i8254 library functions should select this Kconfig option, and import the I8254 symbol namespace. Link: https://lore.kernel.org/r/f6fe32c2db9525d816ab1a01f45abad56c081652.1681665189.git.william.gray@linaro.org/Signed-off-by:
William Breathitt Gray <william.gray@linaro.org>
-
- 06 Jun, 2023 1 commit
-
-
Alfonso Rodriguez authored
The Zynq platform has PCAP, ICAP and JTAG interfaces for configuring programmable logic (PL). The existing driver implementation uses the PCAP interface to configure the PL. Before switching the PL configuration interface from PCAP to ICAP make sure that all outstanding Transactions relevant to the PL configuration should be completed by the PCAP interface otherwise it may lead to PL configuration issues. This patch provides a required fix to ensure that all existing PL transactions are completed before switching from PCAP to ICAP. For detailed information relevant to PL configuration interfaces refer Zynq 7000 TRM (section 6.5.1). Link: https://docs.xilinx.com/v/u/en-US/ug585-Zynq-7000-TRMSigned-off-by:
Alfonso Rodriguez <alfonso.rodriguezm@upm.es> Signed-off-by:
Nava kishore Manne <nava.kishore.manne@amd.com> Acked-by:
-
- 05 Jun, 2023 3 commits
-
-
Sean Nyekjaer authored
Remove special errata handling if FXLS8964AF is used. Fixes: af959b7b ("iio: accel: fxls8962af: fix errata bug E3 - I2C burst reads") Signed-off-by:
Sean Nyekjaer <sean@geanix.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230605103223.1400980-2-sean@geanix.comSigned-off-by:
-
Sean Nyekjaer authored
Scan elements for x,y,z channels is little endian and requires no bit shifts. LE vs. BE is controlled in register SENS_CONFIG2 and bit LE_BE, default value is LE. Fixes: a3e0b518 ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers") Signed-off-by:
-
Greg Kroah-Hartman authored
We need the char/misc fixes in here as well for mergeing and testing. Signed-off-by:
-
- 04 Jun, 2023 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Borislav Petkov: - Fix open firmware quirks validation so that they don't get applied wrongly * tag 'irq_urgent_for_v6.4_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic: Correctly validate OF quirk descriptors
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "Some driver fixes: - a regression fix for the verisilicon driver - uvcvideo: don't expose unsupported video formats to userspace - camss-video: don't zero subdev format after init - mediatek: some fixes for 4K decoder formats - fix a Sphinx build warning (missing doc for client_caps) - some fixes for imx and atomisp staging drivers And two CEC core fixes: - don't set last_initiator if TX in progress - disable adapter in cec_devnode_unregister" * tag 'media/v6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: uvcvideo: Don't expose unsupported formats to userspace media: v4l2-subdev: Fix missing kerneldoc for client_caps media: staging: media: imx: initialize hs_settle to avoid warning media: v4l2-mc: Drop subdev check in v4l2_create_fwnode_links_to_pad() media: staging: media: atomisp: init high & low vars media: cec: core: don't set last_initiator if tx in progress media: cec: core: disable adapter in cec_devnode_unregister media: mediatek: vcodec: Only apply 4K frame sizes on decoder formats media: camss: camss-video: Don't zero subdev format again after initialization media: verisilicon: Additional fix for the crash when opening the driver
-
