- 12 Jul, 2018 4 commits
-
-
Benjamin Herrenschmidt authored
Move fsi_slave_set_smode() and its helpers to before it's first user and remove the corresponding forward declaration. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by:
Joel Stanley <joel@jms.id.au>
-
Benjamin Herrenschmidt authored
"dev" is dereferences before it's checked. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Guenter Roeck authored
The driver calls of_platform_device_create() which is only available if OF_ADDRESS is enabled. When building sparc64 images, this results in ERROR: "of_platform_device_create" [drivers/fsi/fsi-sbefifo.ko] undefined! Fixes: 9f4a8a2d ("fsi/sbefifo: Add driver for the SBE FIFO") Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Eddie James authored
There was no unlock of the FFDC mutex. Fixes: 9f4a8a2d ("fsi/sbefifo: Add driver for the SBE FIFO") Signed-off-by:
Eddie James <eajames@linux.vnet.ibm.com> Signed-off-by:
-
- 18 Jun, 2018 8 commits
-
-
Benjamin Herrenschmidt authored
This was too hard to split ... this adds a number of features to the SCOM user interface: - Support for indirect SCOMs - read()/write() interface now handle errors and retries - New ioctl() "raw" interface for use by debuggers Signed-off-by:
Alistair Popple <alistair@popple.id.au>
-
Benjamin Herrenschmidt authored
Add a few more register and bit definitions, also define and use SCOM_READ_CMD (which is 0 but it makes the code clearer) Signed-off-by:
-
Benjamin Herrenschmidt authored
Use the proper annotated type __be32 and fixup the accessor used for get_scom() Signed-off-by:
-
Benjamin Herrenschmidt authored
No functional changes Signed-off-by:
-
Benjamin Herrenschmidt authored
Otherwise, multiple clients can open the driver and attempt to access the PIB at the same time, thus clobbering each other in the process. Signed-off-by:
-
Joel Stanley authored
fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:606:15: warning: incorrect type in assignment (different base types) fsi-core.c:606:15: expected unsigned int [unsigned] [assigned] [usertype] smode fsi-core.c:606:15: got restricted __be32 [usertype] <noident> fsi-core.c:492:28: warning: expression using sizeof(void) fsi-core.c:520:29: warning: expression using sizeof(void) fsi-core.c:682:19: warning: cast to restricted __be32 fsi-core.c:682:19: warning: cast to restricted __be32 fsi-core.c:682:19: warning: cast to restricted __be32 fsi-core.c:682:19: warning: cast to restricted __be32 fsi-core.c:682:19: warning: cast to restricted __be32 fsi-core.c:682:19: warning: cast to restricted __be32 fsi-core.c:706:24: warning: incorrect type in assignment (different base types) fsi-core.c:706:24: expected unsigned int [unsigned] [usertype] llmode fsi-core.c:706:24: got restricted __be32 [usertype] <noident> Signed-off-by:
-
Joel Stanley authored
fsi-master-hub.c:128:13: warning: incorrect type in assignment (different base types) fsi-master-hub.c:128:13: expected unsigned int [unsigned] [usertype] cmd fsi-master-hub.c:128:13: got restricted __be32 [usertype] <noident> fsi-master-hub.c:208:13: warning: incorrect type in assignment (different base types) fsi-master-hub.c:208:13: expected restricted __be32 [addressable] [assigned] [usertype] reg fsi-master-hub.c:208:13: got int Signed-off-by:
-
Joel Stanley authored
fsi-sbefifo.c:547:58: warning: incorrect type in argument 2 (different base types) fsi-sbefifo.c:547:58: expected restricted __be32 [usertype] *word fsi-sbefifo.c:547:58: got unsigned int *<noident> fsi-sbefifo.c:635:16: warning: incorrect type in assignment (different base types) fsi-sbefifo.c:635:16: expected unsigned int [unsigned] <noident> fsi-sbefifo.c:635:16: got restricted __be32 [usertype] <noident> fsi-sbefifo.c:636:16: warning: incorrect type in assignment (different base types) fsi-sbefifo.c:636:16: expected unsigned int [unsigned] <noident> fsi-sbefifo.c:636:16: got restricted __be32 [usertype] <noident> Signed-off-by:
-
- 14 Jun, 2018 1 commit
-
-
Benjamin Herrenschmidt authored
Spotted by kbuild-test-bot Signed-off-by:
-
- 12 Jun, 2018 19 commits
-
-
Benjamin Herrenschmidt authored
This driver provides an in-kernel and a user API for accessing the command FIFO of the SBE (Self Boot Engine) of the POWER9 processor, via the FSI bus. It provides an in-kernel interface to submit command and receive responses, along with a helper to locate and analyse the response status block. It's a simple synchronous submit() type API. The user interface uses the write/read interface that an earlier version of this driver already provided, however it has some specific limitations in order to keep the driver simple and avoid using up a lot of kernel memory: - The user should perform a single write() with the command and a single read() to get the response (with a buffer big enough to hold the entire response). - On a write() the command is simply "stored" into a kernel buffer, it is submitted as one operation on the subsequent read(). This allows to have the code write directly from the FIFO into the user buffer and avoid hogging the SBE between the write() and read() syscall as it's critical that the SBE be freed asap to respond to the host. An extra write() will simply replace the previously written command. - A write of a single 4 bytes containing the value 0x52534554 in big endian will trigger a reset request. No read is necessary, the write() call will return when the reset has been acknowledged or times out. - The command is limited to 4K bytes. Signed-off-by:
-
Eddie James authored
The PIB reset causes problems for the running P9 chip. The reset shouldn't be performed by this driver. Signed-off-by:
Christopher Bostic <cbostic@linux.vnet.ibm.com> Signed-off-by:
-
Jeremy Kerr authored
We currently use a spinlock (bit_lock) around operations that clock bits out of the FSI bus, and a mutex to protect against simultaneous access to the master. This means that bit_lock isn't needed for mutual exlusion, only to prevent timing issues when clocking bits out. To reflect this, this change converts bit_lock to just the local_irq_save/restore operation. Signed-off-by:
Jeremy Kerr <jk@ozlabs.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
Remove calls to the empty and useless fsi_master_gpio_error() function, and report CRC errors as "FSI_ERR_NO_SLAVE" when reading an all 1's response. Signed-off-by:
-
Benjamin Herrenschmidt authored
The FSI protocol defines two modes of recovery from CRC errors, this implements both: - If the device returns an ECRC (it detected a CRC error in the command), then we simply issue the command again. - If the master detects a CRC error in the response, we send an E_POLL command which requests a resend of the response without actually re-executing the command (which could otherwise have unwanted side effects such as dequeuing a FIFO twice). Signed-off-by:
-
Jeremy Kerr authored
FSI CFAMs support shorter commands that use a relative (or same) address as the last. This change introduces a last_addr to the master state, and uses it for subsequent reads/writes, and performs relative addressing when a subsequent read/write is in range. Signed-off-by:
-
Jeremy Kerr authored
For implementing relative addressing mode, we'll need to build a command that is coherent with CFAM state. To do that, include the build_command_* functions in the locked section of read/write/term. Signed-off-by:
-
Benjamin Herrenschmidt authored
Most SoC GPIO implementations, including the Aspeed one, have synchronizers on the GPIO inputs. This means that the value read from a GPIO is a couple of clocks old, from whatever clock source feeds those synchronizers. In practice, this means that in no-delay mode, we are using a value that can potentially be a bit too old and too close to the clock edge establishing the data on the other side of the link. The voltage converters we use on some systems make this worse and sensitive to things like voltage fluctuations etc... This is, we believe, the cause of occasional CRC errors encountered during heavy activity on the LPC bus. This is fixed by introducing a dummy GPIO read before the actual data read. It slows down SBEFIFO by about 15% (less than any delay primitive) and the end result is so far solid. Signed-off-by:
-
Benjamin Herrenschmidt authored
FSI_GPIO_DPOLL_CLOCKS is the number of clocks before sending a DPOLL command after receiving a BUSY status. It should be at least tSendDelay (16 clocks). According to comments in the code, it needs to also be at least 21 clocks due to HW issues. It's currently 100 clocks which impacts performances negatively in some cases. Reduces it in half to 50 clocks which seems to still be solid. Signed-off-by:
-
Benjamin Herrenschmidt authored
FSI_GPIO_PRIME_SLAVE_CLOCKS is the number of clocks if the "idle" phase between the end of a response and the beginning of the next one. It corresponds to tSendDelay in the FSI specification. The default value in the slave is 16 clocks. 100 is way overkill and significantly reduces the driver performance. This changes it to 20 (which gives the HW a bit of margin still just in case). Signed-off-by:
-
Benjamin Herrenschmidt authored
This adds support for an optional device-tree property that makes the driver skip all the delays around clocking the GPIOs and set it in the device-tree of common POWER9 based OpenPower platforms. This useful on chips like the AST2500 where the GPIO block is running at a fairly low clock frequency (25Mhz typically). In this case, the delays are unnecessary and due to the low precision of the timers, actually quite harmful in terms of performance. Signed-off-by:
-
Benjamin Herrenschmidt authored
We currently sample the input data right after we toggle the clock low, then high. The slave establishes the data on the rising edge, so this is not ideal. We should sample it on the low phase instead. This currently works because we have an extra delay, but subsequent patches will remove it. Signed-off-by:
-
Jeremy Kerr authored
Reduce time spent with interrupts disabled by limiting the critical sections to bitbanging FSI symbols. We only need to ensure exclusive use of the bus for an entire transfer, not that the transfer be performed in atomic context. Signed-off-by:
-
Andrew Jeffery authored
Signed-off-by:
Andrew Jeffery <andrew@aj.id.au> Signed-off-by:
-
Andrew Jeffery authored
An observation from trace output of the existing FSI tracepoints was that the remote device was sometimes reporting as busy. Add a new tracepoint reporting the busy count in order to get a better grip on how often this is the case. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC late updates from Olof Johansson: "This is a branch with a few merge requests that either came in late, or took a while longer for us to review and merge than usual and thus cut it a bit close to the merge window. We stage them in a separate branch and if things look good, we still send them up -- and that's the case here. This is mostly DT additions for Renesas platforms, adding IP block descriptions for existing and new SoCs. There are also some driver updates for Qualcomm platforms for SMEM/QMI and GENI, which is their generalized serial protocol interface" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits) soc: qcom: smem: introduce qcom_smem_virt_to_phys() soc: qcom: qmi: fix a buffer sizing bug MAINTAINERS: Update pattern for qcom_scm soc: Unconditionally include qcom Makefile soc: qcom: smem: check sooner in qcom_smem_set_global_partition() soc: qcom: smem: fix qcom_smem_set_global_partition() soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private() soc: qcom: smem: byte swap values properly soc: qcom: smem: return proper type for cached entry functions soc: qcom: smem: fix first cache entry calculation soc: qcom: cmd-db: Make endian-agnostic drivers: qcom: add command DB driver arm64: dts: renesas: salvator-common: Add ADV7482 support ARM: dts: r8a7740: Add CEU1 ARM: dts: r8a7740: Add CEU0 arm64: dts: renesas: salvator-common: enable VIN arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7795-es1: add CSI-2 node ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC driver updates from Olof Johansson: "This contains platform-related driver updates for ARM and ARM64. Highlights: - ARM SCMI (System Control & Management Interface) driver cleanups - Hisilicon support for LPC bus w/ ACPI - Reset driver updates for several platforms: Uniphier, - Rockchip power domain bindings and hardware descriptions for several SoCs. - Tegra memory controller reset improvements" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (59 commits) ARM: tegra: fix compile-testing PCI host driver soc: rockchip: power-domain: add power domain support for px30 dt-bindings: power: add binding for px30 power domains dt-bindings: power: add PX30 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3228 dt-bindings: power: add binding for rk3228 power domains dt-bindings: power: add RK3228 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3128 dt-bindings: power: add binding for rk3128 power domains dt-bindings: power: add RK3128 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3036 dt-bindings: power: add binding for rk3036 power domains dt-bindings: power: add RK3036 SoCs header for power-domain dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Register SMMU after MC driver became ready soc: mediatek: remove unneeded semicolon soc: mediatek: add a fixed wait for SRAM stable soc: mediatek: introduce a CAPS flag for scp_domain_data soc: mediatek: reuse regmap_read_poll_timeout helpers ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC device tree updates from Olof Johansson: "As always, a large number of DT updates. Too many to enumerate them all, but at a glance: New SoCs introduced in this release: - Amlogic: + Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some set top boxes and other products. - Mediatek: + MT7623A, which is a flavor of the MT7623 family with other on-chip ethernet options. - Qualcomm: + SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845 (Cortex-A75/A55 derivative) SoC that's one of the current high-end mobile SoCs. It's great to see mainline support for it. So far, you can't do much with it, since a lot of peripherals are not yet in the DTs but driver support for USB, GPU and other pieces are starting to trickle in. This might end up being a well-supported SoC upstream if the momentum keeps up. - Renesas: + R8A77990, a.k.a R-Car E3, a new automotive entertainment-targeted SoC. Currently only one Cortex-A53 CPU is enabled, we are eagerly awaiting more. So far, basic drivers such as serial, gpios, PMU and ethernet are enabled. + R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR GPU. Same here, basic set of drivers such as serial, gpios and ethernet enabled, and SMP support is also forthcoming. - STMicroelectronics: + STM32F469, very similar tih STM32F429 but with display support Enhancements to SoCs/platforms (DTS contents, some driver portions might not be in yet): - Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc - Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets - Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces - Marvell Berlin2CD: SMP support, thermal sensors - Mediatek MT7623: Highspeed DMA, audio support - Qualcomm IPQ8074 PCIe support, MSM8996 UFS support - Renesas: Watchdog and PMU support across many platforms - Rockchip RK3399: USB3 OTG support - Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3 - STMicro STM32: Lots of peripherals added to STM32MP175C - Uniphier: Ethernet support New boards: - Allwinner A20: Olimex A20-SOM-EVB-eMMC variant - Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version) - Allwinner A33: Nintendo NES/SuperNES Classic Edition - Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune - Berlin2CD: Valve Steam Link - Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1 - Broadcom: Raspberry Pi 3 B+ - Mediatek MT7623N and MT7623A: reference boards - Meson 8M2: Tronsmart MXIII Plus - NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj - Qualcomm MSM8974: Sony Xperia Z1 Compact support - Qualcomm SDM845: MTP development board - Renesas: Ebisu R8A77990 board - Renesas RZ/G1C: iwg23s: iWave G235-SDB - TI am335x: Pocketbeagle support" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (448 commits) ARM: dts: aspeed: Fix hwrng register address arm64: dts: sprd: whale2: Add the rtc enable clock for watchdog arm64: dts: sprd: Add GPIO and GPIO keys device nodes arm64: dts: sprd: fix typo in 'remote-endpoint' arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator arm64: dts: fix regulator property name for wlan pcie endpoint arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS ARM: dts: pxa3xx: fix MMC clocks ARM: pxa: dts: add pin definitions for extended GPIOs ARM: pxa: dts: add gpio-ranges to gpio controller ARM: dts: ipq8074: Enable few peripherals for hk01 board ARM: dts: ipq8074: Add pcie nodes ARM: dts: ipq8074: Add peripheral nodes ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi ARM: dts: ipq4019: Change the max opp frequency ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC platform updates from Olof Johansson: "Here are the main updates for SoC support (besides DT additions) for ARM 32- and 64-bit platforms. The branch also contains defconfig updates to turn on drivers and options as needed on the various platforms. The largest parts of the delta are from cleanups moving platform data and board file setup of TI platforms to ti-sysc bus drivers. There are also some sweeping changes of eeprom and nand setup on Davinci, i.MX and other platforms. Samsung is removing support for Exynos5440, which was an oddball SoC that hasn't been seen much use in designs. Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D). Linus Walleij is also removing support for ux500 (Sony Ericsson) U8540/9540 SoCs that never made it to significant mass production and products" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) MAINTAINERS: add NXP linux team maillist as i.MX reviewer ARM: stm32: Don't select DMA unconditionally on STM32MP157C arm64: defconfig: Enable PCIe on msm8996 and db820c ARM: pxa3xx: enable external wakeup pins ARM: pxa: stargate2: use device properties for at24 eeprom arm64: defconfig: Enable HISILICON_LPC arm64: defconfig: enable drivers for Poplar support arm64: defconfig: Enable UFS on msm8996 ARM: berlin: switch to SPDX license identifier arm: berlin: remove non-necessary flush_cache_all() ARM: berlin: extend BG2CD Kconfig entry OMAP: CLK: CLKSRC: Add suspend resume hooks ARM: AM43XX: Add functions to save/restore am43xx control registers ASoC: ams_delta: use GPIO lookup table ARM: OMAP1: ams-delta: add GPIO lookup tables bus: ti-sysc: Fix optional clocks array access ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore ...
-
- 11 Jun, 2018 8 commits
-
-
Olof Johansson authored
Merging in defconfig updates. It's useful to keep them separate during development but little point in merging them upstream on their own. * next/defconfig: (40 commits) arm64: defconfig: Enable PCIe on msm8996 and db820c arm64: defconfig: Enable HISILICON_LPC arm64: defconfig: enable drivers for Poplar support arm64: defconfig: Enable UFS on msm8996 arm64: defconfig: enable the Armada thermal driver ARM: multi_v7_defconfig: Enable RENESAS_WDT ARM: shmobile: defconfig: Enable RENESAS_WDT_GEN arm64: defconfig: enable R8A77990 SoC ARM: multi_v7_defconfig: Add STM32F7 I2C & STM32 USBPHYC support arm64: defconfig: Increase CMA size for VC4 arm64: defconfig: enable rockchip efuse ARM: imx_v6_v7_defconfig: Select CONFIG_GPIO_MAX732X by default ARM: imx_v6_v7_defconfig: enable imx6sll by default arm64: defconfig: Enable CONFIG_SND_AUDIO_GRAPH_CARD arm64: defconfig: makes SND_SIMPLE_CARD to module ARM: multi_v7_defconfig: enable the Meson PWM controller arm: multi_v7_defconfig: enable the Amlogic Meson I2C driver arm64: defconfig: enable CONFIG_SPI_ARMADA_3700 arm64: defconfig: Enable CONFIG_PINCTRL_MT7622 by default arm64: defconfig: Enable bluetooth USB support ... Signed-off-by:Olof Johansson <olof@lixom.net>
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: "Core: - simplify getting .drvdata renesas_wdt: - add support for the R8A77965 WDT and R-Car Gen2 - remove R-Car M2-W ES2.x from blacklist sp805: - add restart handler hpwdt: - claim NMIs generated by iLO5 mena21_wdt: - drop unnecessary mutex lock da9062 & da9063: - fixes and general cleanups" * tag 'linux-watchdog-4.18-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: da9063: remove duplicated timeout_to_sel calls watchdog: da9063: rename helper function to avoid misunderstandings watchdog: da9062: remove unused code watchdog: da9063: Fix timeout handling during probe watchdog: da9063: Fix updating timeout value watchdog: da9063: Fix setting/changing timeout dt-bindings: watchdog: renesas-wdt: Add R-Car Gen2 support watchdog: mena21_wdt: Drop unnecessary mutex lock watchdog: renesas-wdt: Add support for the R8A77965 WDT watchdog: hpwdt: Claim NMIs generated by iLO5 watchdog: sp805: add restart handler watchdog: renesas-wdt: Remove R-Car M2-W ES2.x from blacklist watchdog: simplify getting .drvdata
-
Linus Torvalds authored
This reverts commit b468620f. It turns out that this broke drm on AMD platforms. Quoting Gabriel C: "I can confirm reverting b468620f fixes that issue for me. The GPU is working fine with SME enabled. Now with working GPU :) I can also confirm performance is back to normal without doing any other workarounds" Christan König analyzed it partially: "As far as I analyzed it we now get an -ENOMEM from dma_alloc_attrs() in drivers/gpu/drm/ttm/ttm_page_alloc_dma.c when IOMMU is enabled" and Christoph Hellwig responded: "I think the prime issue is that dma_direct_alloc respects the dma mask. Which we don't need if actually using the iommu. This would be mostly harmless exept for the the SEV bit high in the address that makes the checks fail. For now I'd say revert this commit for 4.17/4.18-rc and I'll look into addressing these issues properly" Reported-and-bisected-by:
Gabriel C <nix.or.die@gmail.com> Acked-by:
Christoph Hellwig <hch@lst.de> Cc: Christian König <christian.koenig@amd.com> Cc: Michel Dänzer <michel.daenzer@amd.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@kernel.org # v4.17 Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull rpmsg updates from Bjorn Andersson: "This migrates rpmsg to use SPDX license headers and fixes a use-after-free in SMD" * tag 'rpmsg-v4.18' of git://github.com/andersson/remoteproc: rpmsg: smd: do not use mananged resources for endpoints and channels rpmsg: char: Switch to SPDX license identifier rpmsg: glink: Switch to SPDX license identifier rpmsg: smd: Switch to SPDX license identifier rpmsg: virtio_rpmsg_bus: Switch to SPDX license identifier rpmsg: Switch to SPDX license identifier rpmsg: qcom_smd: Access APCS through mailbox framework rpmsg: Add driver_override device attribute for rpmsg_device
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull remoteproc updates from Bjorn Andersson: "This brings a few minor fixes to the Davinci driver, drops a orphan include file from the StE cleanup done ealier and introduces support for booting the modem on Qualcomm's SDM845 platform" * tag 'rproc-v4.18' of git://github.com/andersson/remoteproc: remoteproc: q6v5: Allow defining GLINK edge for mss remoteproc remoteproc: q6v5: Add support for mss remoteproc on SDM845 remoteproc: q6v5: Introduce reset assert/deassert helper functions dt-bindings: remoteproc: Add Q6v5 Modem PIL binding for SDM845 remoteproc: q6v5: Move proxy unvote to handover irq handler remoteproc: q6v5: Return irq from q6v5_request_irq() remoteproc/ste: remove abandoned include file remoteproc/davinci: use octal permissions for module_param() remoteproc/davinci: prepare and unprepare the clock where needed remoteproc/davinci: add the missing retval check for clk_enable() remoteproc: Remove depends on HAS_DMA in case of platform dependency remoteproc: Prevent incorrect rproc state on xfer mem ownership failure
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull hwspinlock updates from Bjorn Andersson: "In addition to migrating the files to use SPDX license headers this introduces the ability for clients to operate a hwlock without the framework taking any additional locks" * tag 'hwlock-v4.18' of git://github.com/andersson/remoteproc: hwspinlock/u8500: Switch to SPDX license identifier hwspinlock: sprd: Switch to SPDX license identifier hwspinlock/sirf: Switch to SPDX license identifier hwspinlock: qcom: Switch to SPDX license identifier hwspinlock/omap: Switch to SPDX license identifier hwspinlock/core: Switch to SPDX license identifier hwspinlock: Introduce one new mode for hwspinlock hwspinlock: Convert to use 'switch' statement
-
Linus Torvalds authored
Al noted that the semantics of the ia64 perfmon mmap() is really wrong, and can cause serious VM problems. Before we look at whether it needs to be fixed, let's see if anybody even uses it, and mark it broken. It may be that we can just remove the code entirely. Reported-by:
Alexander Viro <viro@zeniv.linux.org.uk> Acked-by:
Matthew Wilcox <willy@infradead.org> Acked-by:
Stephane Eranian <eranian@google.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs updates from Jaegeuk Kim: "In this round, we've mainly focused on discard, aka unmap, control along with fstrim for Android-specific usage model. In addition, we've fixed writepage flow which returned EAGAIN previously resulting in EIO of fsync(2) due to mapping's error state. In order to avoid old MM bug [1], we decided not to use __GFP_ZERO for the mapping for node and meta page caches. As always, we've cleaned up many places for future fsverity and symbol conflicts. Enhancements: - do discard/fstrim in lower priority considering fs utilization - split large discard commands into smaller ones for better responsiveness - add more sanity checks to address syzbot reports - add a mount option, fsync_mode=nobarrier, which can reduce # of cache flushes - clean up symbol namespace with modified function names - be strict on block allocation and IO control in corner cases Bug fixes: - don't use __GFP_ZERO for mappings - fix error reports in writepage to avoid fsync() failure - avoid selinux denial on CAP_RESOURCE on resgid/resuid - fix some subtle race conditions in GC/atomic writes/shutdown - fix overflow bugs in sanity_check_raw_super - fix missing bits on get_flags Clean-ups: - prepare the generic flow for future fsverity integration - fix some broken coding standard" [1] https://lkml.org/lkml/2018/4/8/661 * tag 'f2fs-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (79 commits) f2fs: fix to clear FI_VOLATILE_FILE correctly f2fs: let sync node IO interrupt async one f2fs: don't change wbc->sync_mode f2fs: fix to update mtime correctly fs: f2fs: insert space around that ':' and ', ' fs: f2fs: add missing blank lines after declarations fs: f2fs: changed variable type of offset "unsigned" to "loff_t" f2fs: clean up symbol namespace f2fs: make set_de_type() static f2fs: make __f2fs_write_data_pages() static f2fs: fix to avoid accessing cross the boundary f2fs: fix to let caller retry allocating block address disable loading f2fs module on PAGE_SIZE > 4KB f2fs: fix error path of move_data_page f2fs: don't drop dentry pages after fs shutdown f2fs: fix to avoid race during access gc_thread pointer f2fs: clean up with clear_radix_tree_dirty_tag f2fs: fix to don't trigger writeback during recovery f2fs: clear discard_wake earlier f2fs: let discard thread wait a little longer if dev is busy ...
-
