- 31 Jan, 2018 38 commits
-
-
Pablo Neira Ayuso authored
commit 92b4423e upstream. This is a forward-port of the original patch from Andrzej Hajda, he said: "IS_ERR_VALUE should be used only with unsigned long type. Otherwise it can work incorrectly. To achieve this function xt_percpu_counter_alloc is modified to return unsigned long, and its result is assigned to temporary variable to perform error checking, before assigning to .pcnt field. The patch follows conclusion from discussion on LKML [1][2]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2120927 [2]: http://permalink.gmane.org/gmane.linux.kernel/2150581" Original patch from Andrzej is here: http://patchwork.ozlabs.org/patch/582970/ This patch has clashed with input validation fixes for x_tables. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Michal Kubecek <mkubecek@suse.cz>
-
Pau Espin Pedrol authored
commit cc31d43b upstream. Otherwise, RST packets generated by ipt_REJECT always have mark 0 when the routing is checked later in the same code path. Fixes: e110861f ("net: add a sysctl to reflect the fwmark on replies") Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
Pau Espin Pedrol <pau.espin@tessares.net> Signed-off-by:
-
Ulrich Weber authored
commit 444f9017 upstream. on SIP requests, so a fragmented TCP SIP packet from an allow header starting with INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE Content-Length: 0 will not bet interpreted as an INVITE request. Also Request-URI must start with an alphabetic character. Confirm with RFC 3261 Request-Line = Method SP Request-URI SP SIP-Version CRLF Fixes: 30f33e6d ("[NETFILTER]: nf_conntrack_sip: support method specific request/response handling") Signed-off-by:
Ulrich Weber <ulrich.weber@riverbed.com> Acked-by:
Marco Angaroni <marcoangaroni@gmail.com> Signed-off-by:
-
Florian Westphal authored
commit 95a8d19f upstream. In case nf_conntrack_tuple_taken did not find a conflicting entry check that all entries in this hash slot were tested and restart in case an entry was moved to another chain. Reported-by:
Eric Dumazet <edumazet@google.com> Fixes: ea781f19 ("netfilter: nf_conntrack: use SLAB_DESTROY_BY_RCU and get rid of call_rcu()") Signed-off-by:
Florian Westphal <fw@strlen.de> Acked-by:
-
Liping Zhang authored
commit 00a3101f upstream. Like NFQNL_MSG_VERDICT_BATCH do, we should also reject the verdict request when the portid is not same with the initial portid(maybe from another process). Fixes: 97d32cf9 ("netfilter: nfnetlink_queue: batch verdict support") Signed-off-by:
Liping Zhang <liping.zhang@spreadtrum.com> Reviewed-by:
-
Liping Zhang authored
commit b173a28f upstream. The 'name' filed in struct nf_conntrack_expect_policy{} is not a pointer, so check it is NULL or not will always return true. Even if the name is empty, slash will always be displayed like follows: # cat /proc/net/nf_conntrack_expect 297 l3proto = 2 proto=6 src=1.1.1.1 dst=2.2.2.2 sport=1 dport=1025 ftp/ ^ Fixes: 3a8fc53a ("netfilter: nf_ct_helper: allocate 16 bytes for the helper and policy names") Signed-off-by:
-
Paolo Abeni authored
commit 83170f3b upstream. With the commit 48e8aa6e ("ipv6: Set FLOWI_FLAG_KNOWN_NH at flowi6_flags") ip6_pol_route() callers were asked to to set the FLOWI_FLAG_KNOWN_NH properly and xt_TEE was updated accordingly, but with the later refactor in commit bbde9fc1 ("netfilter: factor out packet duplication for IPv4/IPv6") the flowi6_flags update was lost. This commit re-add it just before the routing decision. Fixes: bbde9fc1 ("netfilter: factor out packet duplication for IPv4/IPv6") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Hongxu Jia authored
commit 17a49cd5 upstream. Since 09d96860 ("netfilter: x_tables: do compat validation via translate_table"), it used compatr structure to assign newinfo structure. In translate_compat_table of ip_tables.c and ip6_tables.c, it used compatr->hook_entry to replace info->hook_entry and compatr->underflow to replace info->underflow, but not do the same replacement in arp_tables.c. It caused invoking 32-bit "arptbale -P INPUT ACCEPT" failed in 64bit kernel. -------------------------------------- root@qemux86-64:~# arptables -P INPUT ACCEPT root@qemux86-64:~# arptables -P INPUT ACCEPT ERROR: Policy for `INPUT' offset 448 != underflow 0 arptables: Incompatible with this kernel -------------------------------------- Fixes: 09d96860 ("netfilter: x_tables: do compat validation via translate_table") Signed-off-by:
Hongxu Jia <hongxu.jia@windriver.com> Acked-by:
-
Florian Westphal authored
commit f4dc7771 upstream. The dummy ruleset I used to test the original validation change was broken, most rules were unreachable and were not tested by mark_source_chains(). In some cases rulesets that used to load in a few seconds now require several minutes. sample ruleset that shows the behaviour: echo "*filter" for i in $(seq 0 100000);do printf ":chain_%06x - [0:0]\n" $i done for i in $(seq 0 100000);do printf -- "-A INPUT -j chain_%06x\n" $i printf -- "-A INPUT -j chain_%06x\n" $i printf -- "-A INPUT -j chain_%06x\n" $i done echo COMMIT [ pipe result into iptables-restore ] This ruleset will be about 74mbyte in size, with ~500k searches though all 500k[1] rule entries. iptables-restore will take forever (gave up after 10 minutes) Instead of always searching the entire blob for a match, fill an array with the start offsets of every single ipt_entry struct, then do a binary search to check if the jump target is present or not. After this change ruleset restore times get again close to what one gets when reverting 36472341 (~3 seconds on my workstation). [1] every user-defined rule gets an implicit RETURN, so we get 300k jumps + 100k userchains + 100k returns -> 500k rule entries Fixes: 36472341 ("netfilter: x_tables: validate targets of jumps") Reported-by:
Jeff Wu <wujiafu@gmail.com> Tested-by:
-
Seunghun Han authored
commit 3b2d6911 upstream. ACPICA commit a23325b2e583556eae88ed3f764e457786bf4df6 I found some ACPI operand cache leaks in ACPI early abort cases. Boot log of ACPI operand cache leak is as follows: >[ 0.174332] ACPI: Added _OSI(Module Device) >[ 0.175504] ACPI: Added _OSI(Processor Device) >[ 0.176010] ACPI: Added _OSI(3.0 _SCP Extensions) >[ 0.177032] ACPI: Added _OSI(Processor Aggregator Device) >[ 0.178284] ACPI: SCI (IRQ16705) allocation failed >[ 0.179352] ACPI Exception: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20160930/evevent-131) >[ 0.180008] ACPI: Unable to start the ACPI Interpreter >[ 0.181125] ACPI Error: Could not remove SCI handler (20160930/evmisc-281) >[ 0.184068] kmem_cache_destroy Acpi-Operand: Slab cache still has objects >[ 0.185358] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.10.0-rc3 #2 >[ 0.186820] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 >[ 0.188000] Call Trace: >[ 0.188000] ? dump_stack+0x5c/0x7d >[ 0.188000] ? kmem_cache_destroy+0x224/0x230 >[ 0.188000] ? acpi_sleep_proc_init+0x22/0x22 >[ 0.188000] ? acpi_os_delete_cache+0xa/0xd >[ 0.188000] ? acpi_ut_delete_caches+0x3f/0x7b >[ 0.188000] ? acpi_terminate+0x5/0xf >[ 0.188000] ? acpi_init+0x288/0x32e >[ 0.188000] ? __class_create+0x4c/0x80 >[ 0.188000] ? video_setup+0x7a/0x7a >[ 0.188000] ? do_one_initcall+0x4e/0x1b0 >[ 0.188000] ? kernel_init_freeable+0x194/0x21a >[ 0.188000] ? rest_init+0x80/0x80 >[ 0.188000] ? kernel_init+0xa/0x100 >[ 0.188000] ? ret_from_fork+0x25/0x30 When early abort is occurred due to invalid ACPI information, Linux kernel terminates ACPI by calling acpi_terminate() function. The function calls acpi_ns_terminate() function to delete namespace data and ACPI operand cache (acpi_gbl_module_code_list). But the deletion code in acpi_ns_terminate() function is wrapped in ACPI_EXEC_APP definition, therefore the code is only executed when the definition exists. If the define doesn't exist, ACPI operand cache (acpi_gbl_module_code_list) is leaked, and stack dump is shown in kernel log. This causes a security threat because the old kernel (<= 4.9) shows memory locations of kernel functions in stack dump, therefore kernel ASLR can be neutralized. To fix ACPI operand leak for enhancing security, I made a patch which removes the ACPI_EXEC_APP define in acpi_ns_terminate() function for executing the deletion code unconditionally. Link: https://github.com/acpica/acpica/commit/a23325b2Signed-off-by:
Seunghun Han <kkamagui@gmail.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Lee, Chun-Yi <jlee@suse.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit c2a6bbaf upstream. The way acpi_find_child_device() works currently is that, if there are two (or more) devices with the same _ADR value in the same namespace scope (which is not specifically allowed by the spec and the OS behavior in that case is not defined), the first one of them found to be present (with the help of _STA) will be returned. This covers the majority of cases, but is not sufficient if some of the devices in question have a _HID (or _CID) returning some valid ACPI/PNP device IDs (which is disallowed by the spec) and the ASL writers' expectation appears to be that the OS will match devices without a valid ACPI/PNP device ID against a given bus address first. To cover this special case as well, modify find_child_checks() to prefer devices without ACPI/PNP device IDs over devices that have them. Suggested-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Rafael J. Wysocki authored
commit 86314751 upstream. Roland Dreier reports that one of his systems cannot boot because of the changes made by commit ac212b69 (ACPI / processor: Use common hotplug infrastructure). The problematic part of it is the request_region() call in acpi_processor_get_info() that used to run at module init time before the above commit and now it runs much earlier. Unfortunately, the region(s) reserved by it fall into a range the PCI subsystem attempts to reserve for AHCI IO BARs. As a result, the PCI reservation fails and AHCI doesn't work, while previously the PCI reservation would be made before acpi_processor_get_info() and it would succeed. That request_region() call, however, was overlooked by commit ac212b69, as it is not necessary for the enumeration of the processors. It only is needed when the ACPI processor driver actually attempts to handle them which doesn't happen before loading the ACPI processor driver module. Therefore that call should have been moved from acpi_processor_get_info() into that module. Address the problem by moving the request_region() call in question out of acpi_processor_get_info() and use the observation that the region reserved by it is only needed if the FADT-based CPU throttling method is going to be used, which means that it should be sufficient to invoke it from acpi_processor_get_throttling_fadt(). Fixes: ac212b69 (ACPI / processor: Use common hotplug infrastructure) Reported-by:
Roland Dreier <roland@purestorage.com> Tested-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Rui Wang authored
commit 9d98bcec upstream. On a 4-socket Brickland system, hot-removing one ioapic is fine. Hot-removing the 2nd one causes panic in mp_unregister_ioapic() while calling release_resource(). It is because the iomem_res pointer has already been released when removing the first ioapic. To explain the use of &res[num] here: res is assigned to ioapic_resources, and later in ioapic_insert_resources() we do: struct resource *r = ioapic_resources; for_each_ioapic(i) { insert_resource(&iomem_resource, r); r++; } Here 'r' is treated as an arry of 'struct resource', and the r++ ensures that each element of the array is inserted separately. Thus we should call release_resouce() on each element at &res[num]. Fix it by assigning the correct pointers to ioapics[i].iomem_res in ioapic_setup_resources(). Signed-off-by:
Rui Wang <rui.y.wang@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: tony.luck@intel.com Cc: linux-pci@vger.kernel.org Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: bhelgaas@google.com Link: http://lkml.kernel.org/r/1465369193-4816-3-git-send-email-rui.y.wang@intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
-
Jiri Slaby authored
commit 99989835 upstream. When LONG_MIN is passed to msgrcv, one would expect to recieve any message. But convert_mode does *msgtyp = -*msgtyp and -LONG_MIN is undefined. In particular, with my gcc -LONG_MIN produces -LONG_MIN again. So handle this case properly by assigning LONG_MAX to *msgtyp if LONG_MIN was specified as msgtyp to msgrcv. This code: long msg[] = { 100, 200 }; int m = msgget(IPC_PRIVATE, IPC_CREAT | 0644); msgsnd(m, &msg, sizeof(msg), 0); msgrcv(m, &msg, sizeof(msg), LONG_MIN, 0); produces currently nothing: msgget(IPC_PRIVATE, IPC_CREAT|0644) = 65538 msgsnd(65538, {100, "\310\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 16, 0) = 0 msgrcv(65538, ... Except a UBSAN warning: UBSAN: Undefined behaviour in ipc/msg.c:745:13 negation of -9223372036854775808 cannot be represented in type 'long int': With the patch, I see what I expect: msgget(IPC_PRIVATE, IPC_CREAT|0644) = 0 msgsnd(0, {100, "\310\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 16, 0) = 0 msgrcv(0, {100, "\310\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 16, -9223372036854775808, 0) = 16 Link: http://lkml.kernel.org/r/20161024082633.10148-1-jslaby@suse.czSigned-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vlastimil Babka authored
commit b050e376 upstream. Since commit 97a16fc8 ("mm, page_alloc: only enforce watermarks for order-0 allocations"), __zone_watermark_ok() check for high-order allocations will shortcut per-migratetype free list checks for ALLOC_HARDER allocations, and return true as long as there's free page of any migratetype. The intention is that ALLOC_HARDER can allocate from MIGRATE_HIGHATOMIC free lists, while normal allocations can't. However, as a side effect, the watermark check will then also return true when there are pages only on the MIGRATE_ISOLATE list, or (prior to CMA conversion to ZONE_MOVABLE) on the MIGRATE_CMA list. Since the allocation cannot actually obtain isolated pages, and might not be able to obtain CMA pages, this can result in a false positive. The condition should be rare and perhaps the outcome is not a fatal one. Still, it's better if the watermark check is correct. There also shouldn't be a performance tradeoff here. Link: http://lkml.kernel.org/r/20171102125001.23708-1-vbabka@suse.cz Fixes: 97a16fc8 ("mm, page_alloc: only enforce watermarks for order-0 allocations") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Rik van Riel <riel@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Doug Berger authored
commit e048cb32 upstream. The align_offset parameter is used by bitmap_find_next_zero_area_off() to represent the offset of map's base from the previous alignment boundary; the function ensures that the returned index, plus the align_offset, honors the specified align_mask. The logic introduced by commit b5be83e3 ("mm: cma: align to physical address, not CMA region position") has the cma driver calculate the offset to the *next* alignment boundary. In most cases, the base alignment is greater than that specified when making allocations, resulting in a zero offset whether we align up or down. In the example given with the commit, the base alignment (8MB) was half the requested alignment (16MB) so the math also happened to work since the offset is 8MB in both directions. However, when requesting allocations with an alignment greater than twice that of the base, the returned index would not be correctly aligned. Also, the align_order arguments of cma_bitmap_aligned_mask() and cma_bitmap_aligned_offset() should not be negative so the argument type was made unsigned. Fixes: b5be83e3 ("mm: cma: align to physical address, not CMA region position") Link: http://lkml.kernel.org/r/20170628170742.2895-1-opendmb@gmail.comSigned-off-by:
Angus Clark <angus@angusclark.org> Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Gregory Fong <gregory.0xf0@gmail.com> Cc: Doug Berger <opendmb@gmail.com> Cc: Angus Clark <angus@angusclark.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Shiraz Hashim <shashim@codeaurora.org> Cc: Jaewon Kim <jaewon31.kim@samsung.com> Signed-off-by:
-
Michal Hocko authored
commit 18365225 upstream. Laurent Dufour has noticed that hwpoinsoned pages are kept charged. In his particular case he has hit a bad_page("page still charged to cgroup") when onlining a hwpoison page. While this looks like something that shouldn't happen in the first place because onlining hwpages and returning them to the page allocator makes only little sense it shows a real problem. hwpoison pages do not get freed usually so we do not uncharge them (at least not since commit 0a31bc97 ("mm: memcontrol: rewrite uncharge API")). Each charge pins memcg (since e8ea14cc ("mm: memcontrol: take a css reference for each charged page")) as well and so the mem_cgroup and the associated state will never go away. Fix this leak by forcibly uncharging a LRU hwpoisoned page in delete_from_lru_cache(). We also have to tweak uncharge_list because it cannot rely on zero ref count for these pages. [akpm@linux-foundation.org: coding-style fixes] Fixes: 0a31bc97 ("mm: memcontrol: rewrite uncharge API") Link: http://lkml.kernel.org/r/20170502185507.GB19165@dhcp22.suse.czSigned-off-by:
Michal Hocko <mhocko@suse.com> Reported-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Tested-by:
Balbir Singh <bsingharora@gmail.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Michal Hocko authored
commit 561b5e07 upstream. Commit 1be7107f ("mm: larger stack guard gap, between vmas") has introduced a regression in some rust and Java environments which are trying to implement their own stack guard page. They are punching a new MAP_FIXED mapping inside the existing stack Vma. This will confuse expand_{downwards,upwards} into thinking that the stack expansion would in fact get us too close to an existing non-stack vma which is a correct behavior wrt safety. It is a real regression on the other hand. Let's work around the problem by considering PROT_NONE mapping as a part of the stack. This is a gros hack but overflowing to such a mapping would trap anyway an we only can hope that usespace knows what it is doing and handle it propely. Fixes: 1be7107f ("mm: larger stack guard gap, between vmas") Link: http://lkml.kernel.org/r/20170705182849.GA18027@dhcp22.suse.czSigned-off-by:
-
Vlastimil Babka authored
commit 2d19309c upstream. The select(2) syscall performs a kmalloc(size, GFP_KERNEL) where size grows with the number of fds passed. We had a customer report page allocation failures of order-4 for this allocation. This is a costly order, so it might easily fail, as the VM expects such allocation to have a lower-order fallback. Such trivial fallback is vmalloc(), as the memory doesn't have to be physically contiguous and the allocation is temporary for the duration of the syscall only. There were some concerns, whether this would have negative impact on the system by exposing vmalloc() to userspace. Although an excessive use of vmalloc can cause some system wide performance issues - TLB flushes etc. - a large order allocation is not for free either and an excessive reclaim/compaction can have a similar effect. Also note that the size is effectively limited by RLIMIT_NOFILE which defaults to 1024 on the systems I checked. That means the bitmaps will fit well within single page and thus the vmalloc() fallback could be only excercised for processes where root allows a higher limit. Note that the poll(2) syscall seems to use a linked list of order-0 pages, so it doesn't need this kind of fallback. [eric.dumazet@gmail.com: fix failure path logic] [akpm@linux-foundation.org: use proper type for size] Link: http://lkml.kernel.org/r/20160927084536.5923-1-vbabka@suse.czSigned-off-by:
-
yangbo lu authored
commit 1ef5e49e upstream. A previous patch had removed esdhc_of_platform_init() by mistake. static void esdhc_of_platform_init(struct sdhci_host *host) { u32 vvn; vvn = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS); vvn = (vvn & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT; if (vvn == VENDOR_V_22) host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23; if (vvn > VENDOR_V_22) host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ; } This patch is used to fix it by add/remove some quirks according to verdor version in probe. Signed-off-by:
Yangbo Lu <yangbo.lu@freescale.com> Fixes: f4932cfd ("mmc: sdhci-of-esdhc: support both BE and LE host controller") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Matthias Brugger <mbrugger@suse.com> Signed-off-by:
-
Minghuan Lian authored
commit 1195c103 upstream. Some kinds of Layerscape PCIe controllers will forward the received message TLPs to system application address space, which could corrupt system memory or lead to a system hang. Enable MSG_DROP to fix this issue. Signed-off-by:
Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Yang Shi authored
commit dbae40b7 upstream. The Layerscape PCI host driver must recognize ls2085a compatible when using firmware with ls2085a compatible property, otherwise the PCI bus won't be detected even though ls2085a compatible is included by the dts. Signed-off-by:
Yang Shi <yang.shi@linaro.org> Signed-off-by:
-
Sudeep Holla authored
commit 55877ef4 upstream. ARM64 enables both CONFIG_OF and CONFIG_ACPI and the firmware can pass both ACPI tables and the device tree. Based on the kernel parameter, one of the two will be chosen. If acpi is enabled, then device tree is not unflattened. Currently ARM64 platforms report: " Failed to find cpu0 device node Unable to detect cache hierarchy from DT for CPU 0 " which is incorrect when booting with ACPI. Also latest ACPI v6.1 has no support for cache properties/hierarchy. This patch adds check for unflattened device tree and also returns as "not supported" if ACPI is runtime enabled. It also removes the reference to DT from the error message as the cache hierarchy can be detected from the firmware(OF/DT/ACPI) Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Mian Yousaf Kaukab <yousaf.kaukab@suse.com> Signed-off-by:
-
Sudeep Holla authored
commit fac51482 upstream. With CONFIG_OF enabled on x86, we get the following error on boot: " Failed to find cpu0 device node Unable to detect cache hierarchy from DT for CPU 0 " and the cacheinfo fails to get populated in the corresponding sysfs entries. This is because cache_setup_of_node looks for of_node for setting up the shared cpu_map without checking that it's already populated in the architecture specific callback. In order to indicate that the shared cpu_map is already populated, this patch introduces a boolean `cpu_map_populated` in struct cpu_cacheinfo that can be used by the generic code to skip cache_shared_cpu_map_setup. This patch also sets that boolean for x86. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Janakarajan Natarajan authored
commit 88d879d2 upstream. Newer hardware has uncovered a bug in the software implementation of using MWAITX for the delay function. A value of 0 for the timer is meant to indicate that a timeout will not be used to exit MWAITX. On newer hardware this can result in MWAITX never returning, resulting in NMI soft lockup messages being printed. On older hardware, some of the other conditions under which MWAITX can exit masked this issue. The AMD APM does not currently document this and will be updated. Please refer to http://marc.info/?l=kvm&m=148950623231140 for information regarding NMI soft lockup messages on an AMD Ryzen 1800X. This has been root-caused as a 0 passed to MWAITX causing it to wait indefinitely. This change has the added benefit of avoiding the unnecessary setup of MONITORX/MWAITX when the delay value is zero. Signed-off-by:
Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Link: http://lkml.kernel.org/r/1493156643-29366-1-git-send-email-Janakarajan.Natarajan@amd.comSigned-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
-
Thomas Gleixner authored
commit b831275a upstream. Linus noticed that lock_timer_base() lacks a READ_ONCE() for accessing the timer flags. As a consequence the compiler is allowed to reload the flags between the initial check for TIMER_MIGRATION and the following timer base computation and the spin lock of the base. While this has not been observed (yet), we need to make sure that it never happens. Fixes: 0eeda71b ("timer: Replace timer base by a cpu index") Reported-by:
Mike Galbraith <mgalbraith@suse.de> Signed-off-by:
-
Vegard Nossum authored
commit 979515c5 upstream. I ran into this: ================================================================================ UBSAN: Undefined behaviour in kernel/time/hrtimer.c:310:16 signed integer overflow: 9223372036854775807 + 50000 cannot be represented in type 'long long int' CPU: 2 PID: 4798 Comm: trinity-c2 Not tainted 4.8.0-rc1+ #91 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 0000000000000000 ffff88010ce6fb88 ffffffff82344740 0000000041b58ab3 ffffffff84f97a20 ffffffff82344694 ffff88010ce6fbb0 ffff88010ce6fb60 000000000000c350 ffff88010ce6f968 dffffc0000000000 ffffffff857bc320 Call Trace: [<ffffffff82344740>] dump_stack+0xac/0xfc [<ffffffff82344694>] ? _atomic_dec_and_lock+0xc4/0xc4 [<ffffffff8242df78>] ubsan_epilogue+0xd/0x8a [<ffffffff8242e6b4>] handle_overflow+0x202/0x23d [<ffffffff8242e4b2>] ? val_to_string.constprop.6+0x11e/0x11e [<ffffffff8236df71>] ? timerqueue_add+0x151/0x410 [<ffffffff81485c48>] ? hrtimer_start_range_ns+0x3b8/0x1380 [<ffffffff81795631>] ? memset+0x31/0x40 [<ffffffff8242e6fd>] __ubsan_handle_add_overflow+0xe/0x10 [<ffffffff81488ac9>] hrtimer_nanosleep+0x5d9/0x790 [<ffffffff814884f0>] ? hrtimer_init_sleeper+0x80/0x80 [<ffffffff813a9ffb>] ? __might_sleep+0x5b/0x260 [<ffffffff8148be10>] common_nsleep+0x20/0x30 [<ffffffff814906c7>] SyS_clock_nanosleep+0x197/0x210 [<ffffffff81490530>] ? SyS_clock_getres+0x150/0x150 [<ffffffff823c7113>] ? __this_cpu_preempt_check+0x13/0x20 [<ffffffff8162ef60>] ? __context_tracking_exit.part.3+0x30/0x1b0 [<ffffffff81490530>] ? SyS_clock_getres+0x150/0x150 [<ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0 [<ffffffff845f85aa>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================================ Add a new ktime_add_unsafe() helper which doesn't check for overflow, but doesn't throw a UBSAN warning when it does overflow either. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Eric Biggers authored
commit f9723837 upstream. Accessing more than one byte from a symbol declared simply 'char' is undefined behavior, as reported by UBSAN: UBSAN: Undefined behaviour in drivers/base/power/trace.c:178:18 load of address ffffffff8203fc78 with insufficient space for an object of type 'char' Avoid this by declaring the symbols as arrays. Signed-off-by:
Eric Biggers <ebiggers3@gmail.com> Signed-off-by:
-
Marc Kleine-Budde authored
commit d4689846 upstream. If an invalid CANFD frame is received, from a driver or from a tun interface, a Kernel warning is generated. This patch replaces the WARN_ONCE by a simple pr_warn_once, so that a kernel, bootet with panic_on_warn, does not panic. A printk seems to be more appropriate here. Reported-by: syzbot+e3b775f40babeff6e68b@syzkaller.appspotmail.com Suggested-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Marc Kleine-Budde authored
commit 8cb68751 upstream. If an invalid CAN frame is received, from a driver or from a tun interface, a Kernel warning is generated. This patch replaces the WARN_ONCE by a simple pr_warn_once, so that a kernel, bootet with panic_on_warn, does not panic. A printk seems to be more appropriate here. Reported-by: syzbot+4386709c0c1284dca827@syzkaller.appspotmail.com Suggested-by:
-
Daniel Bristot de Oliveira authored
commit 3effcb42 upstream. We have been facing some problems with self-suspending constrained deadline tasks. The main reason is that the original CBS was not designed for such sort of tasks. One problem reported by Xunlei Pang takes place when a task suspends, and then is awakened before the deadline, but so close to the deadline that its remaining runtime can cause the task to have an absolute density higher than allowed. In such situation, the original CBS assumes that the task is facing an early activation, and so it replenishes the task and set another deadline, one deadline in the future. This rule works fine for implicit deadline tasks. Moreover, it allows the system to adapt the period of a task in which the external event source suffered from a clock drift. However, this opens the window for bandwidth leakage for constrained deadline tasks. For instance, a task with the following parameters: runtime = 5 ms deadline = 7 ms [density] = 5 / 7 = 0.71 period = 1000 ms If the task runs for 1 ms, and then suspends for another 1ms, it will be awakened with the following parameters: remaining runtime = 4 laxity = 5 presenting a absolute density of 4 / 5 = 0.80. In this case, the original CBS would assume the task had an early wakeup. Then, CBS will reset the runtime, and the absolute deadline will be postponed by one relative deadline, allowing the task to run. The problem is that, if the task runs this pattern forever, it will keep receiving bandwidth, being able to run 1ms every 2ms. Following this behavior, the task would be able to run 500 ms in 1 sec. Thus running more than the 5 ms / 1 sec the admission control allowed it to run. Trying to address the self-suspending case, Luca Abeni, Giuseppe Lipari, and Juri Lelli [1] revisited the CBS in order to deal with self-suspending tasks. In the new approach, rather than replenishing/postponing the absolute deadline, the revised wakeup rule adjusts the remaining runtime, reducing it to fit into the allowed density. A revised version of the idea is: At a given time t, the maximum absolute density of a task cannot be higher than its relative density, that is: runtime / (deadline - t) <= dl_runtime / dl_deadline Knowing the laxity of a task (deadline - t), it is possible to move it to the other side of the equality, thus enabling to define max remaining runtime a task can use within the absolute deadline, without over-running the allowed density: runtime = (dl_runtime / dl_deadline) * (deadline - t) For instance, in our previous example, the task could still run: runtime = ( 5 / 7 ) * 5 runtime = 3.57 ms Without causing damage for other deadline tasks. It is note worthy that the laxity cannot be negative because that would cause a negative runtime. Thus, this patch depends on the patch: df8eac8c ("sched/deadline: Throttle a constrained deadline task activated after the deadline") Which throttles a constrained deadline task activated after the deadline. Finally, it is also possible to use the revised wakeup rule for all other tasks, but that would require some more discussions about pros and cons. [The main difference from the original commit is that the BW_SHIFT define was not present yet. As BW_SHIFT was introduced in a new feature, I just used the value (20), likewise we used to use before the #define. Other changes were required because of comments. - bistrot] Reported-by:
Xunlei Pang <xpang@redhat.com> Signed-off-by:
Daniel Bristot de Oliveira <bristot@redhat.com> [peterz: replaced dl_is_constrained with dl_is_implicit] Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luca Abeni <luca.abeni@santannapisa.it> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it> Link: http://lkml.kernel.org/r/5c800ab3a74a168a84ee5f3f84d12a02e11383be.1495803804.git.bristot@redhat.comSigned-off-by:
-
David Woodhouse authored
commit c995efd5 upstream. On context switch from a shallow call stack to a deeper one, as the CPU does 'ret' up the deeper side it may encounter RSB entries (predictions for where the 'ret' goes to) which were populated in userspace. This is problematic if neither SMEP nor KPTI (the latter of which marks userspace pages as NX for the kernel) are active, as malicious code in userspace may then be executed speculatively. Overwrite the CPU's return prediction stack with calls which are predicted to return to an infinite loop, to "capture" speculation if this happens. This is required both for retpoline, and also in conjunction with IBRS for !SMEP && !KPTI. On Skylake+ the problem is slightly different, and an *underflow* of the RSB may cause errant branch predictions to occur. So there it's not so much overwrite, as *filling* the RSB to attempt to prevent it getting empty. This is only a partial solution for Skylake+ since there are many other conditions which may result in the RSB becoming empty. The full solution on Skylake+ is to use IBRS, which will prevent the problem even when the RSB becomes empty. With IBRS, the RSB-stuffing will not be required on context switch. [ tglx: Added missing vendor check and slighty massaged comments and changelog ] [js] backport to 4.4 -- __switch_to_asm does not exist there, we have to patch the switch_to macros for both x86_32 and x86_64. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515779365-9032-1-git-send-email-dwmw@amazon.co.ukSigned-off-by:
-
Dave Hansen authored
commit 970442c5 upstream. Problem: We have a boatload of open-coded family-6 model numbers. Half of them have these model numbers in hex and the other half in decimal. This makes grepping for them tons of fun, if you were to try. Solution: Consolidate all the magic numbers. Put all the definitions in one header. The names here are closely derived from the comments describing the models from arch/x86/events/intel/core.c. We could easily make them shorter by doing things like s/SANDYBRIDGE/SNB/, but they seemed fine even with the longer versions to me. Do not take any of these names too literally, like "DESKTOP" or "MOBILE". These are all colloquial names and not precise descriptions of everywhere a given model will show up. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Cc: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vishwanath Somayaji <vishwanath.somayaji@intel.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: jacob.jun.pan@intel.com Cc: linux-acpi@vger.kernel.org Cc: linux-edac@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Link: http://lkml.kernel.org/r/20160603001927.F2A7D828@viggo.jf.intel.comSigned-off-by:
-
Ben Hutchings authored
The backport of commit b94b7373 ("x86/microcode/intel: Extend BDW late-loading with a revision check") to 4.4-stable deleted a "return true" statement. This bug is not present upstream or other stable branches. Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Jonathan Dieter authored
commit e5dfa3f9 upstream. The usbip userspace tools call sprintf()/snprintf() and don't check for the return value which can lead the paths to overflow, truncating the final file in the path. More urgently, GCC 7 now warns that these aren't checked with -Wformat-overflow, and with -Werror enabled in configure.ac, that makes these tools unbuildable. This patch fixes these problems by replacing sprintf() with snprintf() in one place and adding checks for the return value of snprintf(). Reviewed-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
Jonathan Dieter <jdieter@lesbg.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Jonathan Dieter authored
commit cfd6ed45 upstream. GCC 7 now warns when switch statements fall through implicitly, and with -Werror enabled in configure.ac, that makes these tools unbuildable. We fix this by notifying the compiler that this particular case statement is meant to fall through. Reviewed-by:
-
Shuah Khan authored
commit 2f2d0088 upstream. When a client has a USB device attached over IP, the vhci_hcd driver is locally leaking a socket pointer address via the /sys/devices/platform/vhci_hcd/status file (world-readable) and in debug output when "usbip --debug port" is run. Fix it to not leak. The socket pointer address is not used at the moment and it was made visible as a convenient way to find IP address from socket pointer address by looking up /proc/net/{tcp,tcp6}. As this opens a security hole, the fix replaces socket pointer address with sockfd. Reported-by:
Secunia Research <vuln@secunia.com> Signed-off-by:
-
Andy Lutomirski authored
commit 1c52d859 upstream. We support various non-Intel CPUs that don't have the CPUID instruction, so the M486 test was wrong. For now, fix it with a big hammer: handle missing CPUID on all 32-bit CPUs. Reported-by:
One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Matthew Whitehead <tedheadster@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: xen-devel <Xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/685bd083a7c036f7769510b6846315b17d6ba71f.1481307769.git.luto@kernel.orgSigned-off-by:
-
- 23 Jan, 2018 2 commits
-
-
Greg Kroah-Hartman authored
-
Jonas Gorski authored
commit 0a5191ef upstream. Since commit aef9a7bd ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers"), the port's default FCR value isn't used in serial8250_do_set_termios anymore, but copied over once in serial8250_config_port and then modified as needed. Unfortunately, serial8250_config_port will never be called if the port is shared between kernel and userspace, and the port's flag doesn't have UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well. This causes garbled output from userspace: [ 5.220000] random: procd urandom read with 49 bits of entropy available ers [kee Fix this by forcing it to be configured on boot, resulting in the expected output: [ 5.250000] random: procd urandom read with 50 bits of entropy available Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level Fixes: aef9a7bd ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers") Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17544/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Signed-off-by:
-
