- 23 Sep, 2022 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linuxLinus Torvalds authored
Pull landlock fix from Mickaël Salaün: "Fix out-of-tree builds for Landlock tests" * tag 'landlock-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: selftests/landlock: Fix out-of-tree builds
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - A handful of build fixes for the T-Head errata, including some functional issues the compilers found - A fix for a nasty sigreturn bug * tag 'riscv-for-linus-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Avoid coupling the T-Head CMOs and Zicbom riscv: fix a nasty sigreturn bug... riscv: make t-head erratas depend on MMU riscv: fix RISCV_ISA_SVPBMT kconfig dependency warning RISC-V: Clean up the Zicbom block size probing
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "As everyone back came back from conferences, here are the pending patches for Linux 6.0. ARM: - Fix for kmemleak with pKVM s390: - Fixes for VFIO with zPCI - smatch fix x86: - Ensure XSAVE-capable hosts always allow FP and SSE state to be saved and restored via KVM_{GET,SET}_XSAVE - Fix broken max_mmu_rmap_size stat - Fix compile error with old glibc that doesn't have gettid()" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Inject #UD on emulated XSETBV if XSAVES isn't enabled KVM: x86: Always enable legacy FP/SSE in allowed user XFEATURES KVM: x86: Reinstate kvm_vcpu_arch.guest_supported_xcr0 KVM: x86/mmu: add missing update to max_mmu_rmap_size selftests: kvm: Fix a compile error in selftests/kvm/rseq_test.c KVM: s390: pci: register pci hooks without interpretation KVM: s390: pci: fix GAIT physical vs virtual pointers usage KVM: s390: Pass initialized arg even if unused KVM: s390: pci: fix plain integer as NULL pointer warnings KVM: arm64: Use kmemleak_free_part_phys() to unregister hyp_mem_base
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fix from Juergen Gross: "A single fix for an issue in the xenbus driver (initialization of multi-page rings for Xen PV devices)" * tag 'for-linus-6.0-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: fix xenbus_setup_ring()
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Regular fixes for the week, i915, mediatek, hisilicon, mgag200 and panel have some small fixes. amdgpu has more stack size fixes for clang build, and fixes for new IPs, but all with low regression chances since they are for stuff new in v6.0. i915: - avoid a general protection failure when using perf/OA - avoid kernel warnings on driver release amdgpu: - SDMA 6.x fix - GPUVM TF fix - DCN 3.2.x fixes - DCN 3.1.x fixes - SMU 13.x fixes - Clang stack size fixes for recently enabled DML code - Fix drm dirty callback change on non-atomic cases - USB4 display fix mediatek: - dsi: Add atomic {destroy,duplicate}_state, reset callbacks - dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff() - Fix wrong dither settings hisilicon: - Depend on MMU mgag200: - Fix console on G200ER panel: - Fix innolux_g121i1_l01 bus format" * tag 'drm-fixes-2022-09-23-1' of git://anongit.freedesktop.org/drm/drm: (30 commits) MAINTAINERS: switch graphics to airlied other addresses drm/mediatek: dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff() drm/amd/display: Reduce number of arguments of dml314's CalculateFlipSchedule() drm/amd/display: Reduce number of arguments of dml314's CalculateWatermarksAndDRAMSpeedChangeSupport() drm/amdgpu: don't register a dirty callback for non-atomic drm/amd/pm: drop the pptable related workarounds for SMU 13.0.0 drm/amd/pm: add support for 3794 pptable for SMU13.0.0 drm/amd/display: correct num_dsc based on HW cap drm/amd/display: Disable OTG WA for the plane_state NULL case on DCN314 drm/amd/display: Add shift and mask for ICH_RESET_AT_END_OF_LINE drm/amd/display: increase dcn315 pstate change latency drm/amd/display: Fix DP MST timeslot issue when fallback happened drm/amd/display: Display distortion after hotplug 5K tiled display drm/amd/display: Update dummy P-state search to use DCN32 DML drm/amd/display: skip audio setup when audio stream is enabled drm/amd/display: update gamut remap if plane has changed drm/amd/display: Assume an LTTPR is always present on fixed_vs links drm/amd/display: fix dcn315 memory channel count and width read drm/amd/display: Fix double cursor on non-video RGB MPO drm/amd/display: Only consider pixle rate div policy for DCN32+ ...
-
Paolo Bonzini authored
Merge tag 'kvm-s390-master-6.0-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD More pci fixes Fix for a code analyser warning
-
Dave Airlie authored
My linux.ie address is in a bad place. also add dri-devel for agpgart. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Short summary of fixes pull * drm/hisilicon: Depend on MMU * drm/mgag200: Fix console on G200ER * drm/panel: Fix innolux_g121i1_l01 bus format Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YyxtXS588at6S4wg@linux-uq9g
-
Dave Airlie authored
Merge tag 'mediatek-drm-fixes-6.0' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes for Linux 6.0 1. dsi: Add atomic {destroy,duplicate}_state, reset callbacks 2. drm/mediatek: Fix wrong dither settings 3. dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220921235624.23580-1-chunkuang.hu@kernel.org
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.0-2022-09-21' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.0-2022-09-21: amdgpu: - SDMA 6.x fix - GPUVM TF fix - DCN 3.2.x fixes - DCN 3.1.x fixes - SMU 13.x fixes - Clang stack size fixes for recently enabled DML code - Fix drm dirty callback change on non-atomic cases - USB4 display fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220921220605.6136-1-alexander.deucher@amd.com
-
- 22 Sep, 2022 30 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Three small and pretty obvious fixes, all in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mpt3sas: Fix return value check of dma_get_required_mask() scsi: qla2xxx: Fix memory leak in __qlt_24xx_handle_abts() scsi: qedf: Fix a UAF bug in __qedf_probe()
-
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slabLinus Torvalds authored
Pull slab fixes from Vlastimil Babka: - Fix a possible use-after-free in SLUB's kmem_cache removal, introduced in this cycle, by Feng Tang. - WQ_MEM_RECLAIM dependency fix for the workqueue-based cpu slab flushing introduced in 5.15, by Maurizio Lombardi. - Add missing KASAN hooks in two kmalloc entry paths, by Peter Collingbourne. - A BUG_ON() removal in SLUB's kmem_cache creation when allocation fails (too small to possibly happen in practice, syzbot used fault injection), by Chao Yu. * tag 'slab-for-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm: slub: fix flush_cpu_slab()/__free_slab() invocations in task context. mm/slab_common: fix possible double free of kmem_cache kasan: call kasan_malloc() from __kmalloc_*track_caller() mm/slub: fix to return errno if kmalloc() fails
-
Sean Christopherson authored
Inject #UD when emulating XSETBV if CR4.OSXSAVE is not set. This also covers the "XSAVE not supported" check, as setting CR4.OSXSAVE=1 #GPs if XSAVE is not supported (and userspace gets to keep the pieces if it forces incoherent vCPU state). Add a comment to kvm_emulate_xsetbv() to call out that the CPU checks CR4.OSXSAVE before checking for intercepts. AMD'S APM implies that #UD has priority (says that intercepts are checked before #GP exceptions), while Intel's SDM says nothing about interception priority. However, testing on hardware shows that both AMD and Intel CPUs prioritize the #UD over interception. Fixes: 02d4160f ("x86: KVM: add xsetbv to the emulator") Cc: stable@vger.kernel.org Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220824033057.3576315-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Dr. David Alan Gilbert authored
Allow FP and SSE state to be saved and restored via KVM_{G,SET}_XSAVE on XSAVE-capable hosts even if their bits are not exposed to the guest via XCR0. Failing to allow FP+SSE first showed up as a QEMU live migration failure, where migrating a VM from a pre-XSAVE host, e.g. Nehalem, to an XSAVE host failed due to KVM rejecting KVM_SET_XSAVE. However, the bug also causes problems even when migrating between XSAVE-capable hosts as KVM_GET_SAVE won't set any bits in user_xfeatures if XSAVE isn't exposed to the guest, i.e. KVM will fail to actually migrate FP+SSE. Because KVM_{G,S}ET_XSAVE are designed to allowing migrating between hosts with and without XSAVE, KVM_GET_XSAVE on a non-XSAVE (by way of fpu_copy_guest_fpstate_to_uabi()) always sets the FP+SSE bits in the header so that KVM_SET_XSAVE will work even if the new host supports XSAVE. Fixes: ad856280 ("x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0") bz: https://bugzilla.redhat.com/show_bug.cgi?id=2079311 Cc: stable@vger.kernel.org Cc: Leonardo Bras <leobras@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> [sean: add comment, massage changelog] Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220824033057.3576315-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Reinstate the per-vCPU guest_supported_xcr0 by partially reverting commit 988896bb; the implicit assessment that guest_supported_xcr0 is always the same as guest_fpu.fpstate->user_xfeatures was incorrect. kvm_vcpu_after_set_cpuid() isn't the only place that sets user_xfeatures, as user_xfeatures is set to fpu_user_cfg.default_features when guest_fpu is allocated via fpu_alloc_guest_fpstate() => __fpstate_reset(). guest_supported_xcr0 on the other hand is zero-allocated. If userspace never invokes KVM_SET_CPUID2, supported XCR0 will be '0', whereas the allowed user XFEATURES will be non-zero. Practically speaking, the edge case likely doesn't matter as no sane userspace will live migrate a VM without ever doing KVM_SET_CPUID2. The primary motivation is to prepare for KVM intentionally and explicitly setting bits in user_xfeatures that are not set in guest_supported_xcr0. Because KVM_{G,S}ET_XSAVE can be used to svae/restore FP+SSE state even if the host doesn't support XSAVE, KVM needs to set the FP+SSE bits in user_xfeatures even if they're not allowed in XCR0, e.g. because XCR0 isn't exposed to the guest. At that point, the simplest fix is to track the two things separately (allowed save/restore vs. allowed XCR0). Fixes: 988896bb ("x86/kvm/fpu: Remove kvm_vcpu_arch.guest_supported_xcr0") Cc: stable@vger.kernel.org Cc: Leonardo Bras <leobras@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220824033057.3576315-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Miaohe Lin authored
The update to statistic max_mmu_rmap_size is unintentionally removed by commit 4293ddb7 ("KVM: x86/mmu: Remove redundant spte present check in mmu_set_spte"). Add missing update to it or max_mmu_rmap_size will always be nonsensical 0. Fixes: 4293ddb7 ("KVM: x86/mmu: Remove redundant spte present check in mmu_set_spte") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Message-Id: <20220907080657.42898-1-linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Jinrong Liang authored
The following warning appears when executing: make -C tools/testing/selftests/kvm rseq_test.c: In function ‘main’: rseq_test.c:237:33: warning: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Wimplicit-function-declaration] (void *)(unsigned long)gettid()); ^~~~~~ getgid /usr/bin/ld: /tmp/ccr5mMko.o: in function `main': ../kvm/tools/testing/selftests/kvm/rseq_test.c:237: undefined reference to `gettid' collect2: error: ld returned 1 exit status make: *** [../lib.mk:173: ../kvm/tools/testing/selftests/kvm/rseq_test] Error 1 Use the more compatible syscall(SYS_gettid) instead of gettid() to fix it. More subsequent reuse may cause it to be wrapped in a lib file. Signed-off-by: Jinrong Liang <cloudliang@tencent.com> Message-Id: <20220802071240.84626-1-cloudliang@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.0, take #2 - Fix kmemleak usage in Protected KVM (again)
-
Maurizio Lombardi authored
Commit 5a836bf6 ("mm: slub: move flush_cpu_slab() invocations __free_slab() invocations out of IRQ context") moved all flush_cpu_slab() invocations to the global workqueue to avoid a problem related with deactivate_slab()/__free_slab() being called from an IRQ context on PREEMPT_RT kernels. When the flush_all_cpu_locked() function is called from a task context it may happen that a workqueue with WQ_MEM_RECLAIM bit set ends up flushing the global workqueue, this will cause a dependency issue. workqueue: WQ_MEM_RECLAIM nvme-delete-wq:nvme_delete_ctrl_work [nvme_core] is flushing !WQ_MEM_RECLAIM events:flush_cpu_slab WARNING: CPU: 37 PID: 410 at kernel/workqueue.c:2637 check_flush_dependency+0x10a/0x120 Workqueue: nvme-delete-wq nvme_delete_ctrl_work [nvme_core] RIP: 0010:check_flush_dependency+0x10a/0x120[ 453.262125] Call Trace: __flush_work.isra.0+0xbf/0x220 ? __queue_work+0x1dc/0x420 flush_all_cpus_locked+0xfb/0x120 __kmem_cache_shutdown+0x2b/0x320 kmem_cache_destroy+0x49/0x100 bioset_exit+0x143/0x190 blk_release_queue+0xb9/0x100 kobject_cleanup+0x37/0x130 nvme_fc_ctrl_free+0xc6/0x150 [nvme_fc] nvme_free_ctrl+0x1ac/0x2b0 [nvme_core] Fix this bug by creating a workqueue for the flush operation with the WQ_MEM_RECLAIM bit set. Fixes: 5a836bf6 ("mm: slub: move flush_cpu_slab() invocations __free_slab() invocations out of IRQ context") Cc: <stable@vger.kernel.org> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "Another set of fixes for fixes for the soc tree: - A fix for the interrupt number on at91/lan966 ethernet PHYs - A second round of fixes for NXP i.MX series, including a couple of build issues, and board specific DT corrections on TQMa8MPQL, imx8mp-venice-gw74xx and imx8mm-verdin for reliability and partially broken functionality - Several fixes for Rockchip SoCs, addressing a USB issue on BPI-R2-Pro, wakeup on Gru-Bob and reliability of high-speed SD cards, among other minor issues - A fix for a long-running naming mistake that prevented the moxart mmc driver from working at all - Multiple Arm SCMI firmware fixes for hardening some corner cases" * tag 'soc-fixes-6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits) arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation ARM: dts: lan966x: Fix the interrupt number for internal PHYs arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity dt-bindings: memory-controllers: fsl,imx8m-ddrc: drop Leonard Crestez arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header arm64: defconfig: enable ARCH_NXP arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer arm64: dts: imx8mm-verdin: extend pmic voltages arm64: dts: rockchip: Remove 'enable-active-low' from rk3566-quartz64-a arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma arm64: dts: rockchip: fix property for usb2 phy supply on rk3568-evb1-v10 arm64: dts: rockchip: fix property for usb2 phy supply on rock-3a arm64: dts: imx8ulp: add #reset-cells for pcc arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs arm64: dts: imx8mn: remove GPU power domain reset arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo arm64: dts: rockchip: fix upper usb port on BPI-R2-Pro ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from wifi, netfilter and can. A handful of awaited fixes here - revert of the FEC changes, bluetooth fix, fixes for iwlwifi spew. We added a warning in PHY/MDIO code which is triggering on a couple of platforms in a false-positive-ish way. If we can't iron that out over the week we'll drop it and re-add for 6.1. I've added a new "follow up fixes" section for fixes to fixes in 6.0-rcs but it may actually give the false impression that those are problematic or that more testing time would have caught them. So likely a one time thing. Follow up fixes: - nf_tables_addchain: fix nft_counters_enabled underflow - ebtables: fix memory leak when blob is malformed - nf_ct_ftp: fix deadlock when nat rewrite is needed Current release - regressions: - Revert "fec: Restart PPS after link state change" and the related "net: fec: Use a spinlock to guard `fep->ptp_clk_on`" - Bluetooth: fix HCIGETDEVINFO regression - wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2 - mptcp: fix fwd memory accounting on coalesce - rwlock removal fall out: - ipmr: always call ip{,6}_mr_forward() from RCU read-side critical section - ipv6: fix crash when IPv6 is administratively disabled - tcp: read multiple skbs in tcp_read_skb() - mdio_bus_phy_resume state warning fallout: - eth: ravb: fix PHY state warning splat during system resume - eth: sh_eth: fix PHY state warning splat during system resume Current release - new code bugs: - wifi: iwlwifi: don't spam logs with NSS>2 messages - eth: mtk_eth_soc: enable XDP support just for MT7986 SoC Previous releases - regressions: - bonding: fix NULL deref in bond_rr_gen_slave_id - wifi: iwlwifi: mark IWLMEI as broken Previous releases - always broken: - nf_conntrack helpers: - irc: tighten matching on DCC message - sip: fix ct_sip_walk_headers - osf: fix possible bogus match in nf_osf_find() - ipvlan: fix out-of-bound bugs caused by unset skb->mac_header - core: fix flow symmetric hash - bonding, team: unsync device addresses on ndo_stop - phy: micrel: fix shared interrupt on LAN8814" * tag 'net-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) selftests: forwarding: add shebang for sch_red.sh bnxt: prevent skb UAF after handing over to PTP worker net: marvell: Fix refcounting bugs in prestera_port_sfp_bind() net: sched: fix possible refcount leak in tc_new_tfilter() net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD udp: Use WARN_ON_ONCE() in udp_read_skb() selftests: bonding: cause oops in bond_rr_gen_slave_id bonding: fix NULL deref in bond_rr_gen_slave_id net: phy: micrel: fix shared interrupt on LAN8814 net/smc: Stop the CLC flow if no link to map buffers on ice: Fix ice_xdp_xmit() when XDP TX queue number is not sufficient net: atlantic: fix potential memory leak in aq_ndev_close() can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported can: gs_usb: gs_can_open(): fix race dev->can.state condition can: flexcan: flexcan_mailbox_read() fix return value for drop = true net: sh_eth: Fix PHY state warning splat during system resume net: ravb: Fix PHY state warning splat during system resume netfilter: nf_ct_ftp: fix deadlock when nat rewrite is needed netfilter: ebtables: fix memory leak when blob is malformed netfilter: nf_tables: fix percpu memory leak at nf_tables_addchain() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fixes from Ard Biesheuvel: - Use the right variable to check for shim insecure mode - Wipe setup_data field when booting via EFI - Add missing error check to efibc driver * tag 'efi-urgent-for-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: libstub: check Shim mode using MokSBStateRT efi: x86: Wipe setup_data on pure EFI boot efi: efibc: Guard against allocation failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: - fix a NULL-pointer dereference at driver unbind and a potential resource leak in error path in gpio-mockup - make the irqchip immutable in gpio-ftgpio010 - fix dereferencing a potentially uninitialized variable in gpio-tqmx86 - fix interrupt registering in gpiolib's character device code * tag 'gpio-fixes-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: cdev: Set lineevent_state::irq after IRQ register successfully gpio: tqmx86: fix uninitialized variable girq gpio: ftgpio010: Make irqchip immutable gpio: mockup: Fix potential resource leakage when register a chip gpio: mockup: fix NULL pointer dereference when removing debugfs
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.0-2022-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix polling of system-wide events related to mixing per-cpu and per-thread events. - Do not check if /proc/modules is unchanged when copying /proc/kcore, that doesn't get in the way of post processing analysis. - Include program header in ELF files generated for JIT files, so that they can be opened by tools using elfutils libraries. - Enter namespaces when synthesizing build-ids. - Fix some bugs related to a recent cpu_map overhaul where we should be using an index and not the cpu number. - Fix BPF program ELF section name, using the naming expected by libbpf when using BPF counters in 'perf stat'. - Add a new test for perf stat cgroup BPF counter. - Adjust check on 'perf test wp' for older kernels, where the PERF_EVENT_IOC_MODIFY_ATTRIBUTES ioctl isn't supported. - Sync x86 cpufeatures with the kernel sources, no changes in tooling. * tag 'perf-tools-fixes-for-v6.0-2022-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Honor namespace when synthesizing build-ids tools headers cpufeatures: Sync with the kernel sources perf kcore_copy: Do not check /proc/modules is unchanged libperf evlist: Fix polling of system-wide events perf record: Fix cpu mask bit setting for mixed mmaps perf test: Skip wp modify test on old kernels perf jit: Include program header in ELF files perf test: Add a new test for perf stat cgroup BPF counter perf stat: Use evsel->core.cpus to iterate cpus in BPF cgroup counters perf stat: Fix cpu map index in bperf cgroup code perf stat: Fix BPF program section name
-
Hangbin Liu authored
RHEL/Fedora RPM build checks are stricter, and complain when executable files don't have a shebang line, e.g. *** WARNING: ./kselftests/net/forwarding/sch_red.sh is executable but has no shebang, removing executable bit Fix it by adding shebang line. Fixes: 6cf0291f ("selftests: forwarding: Add a RED test for SW datapath") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20220922024453.437757-1-liuhangbin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
When reading the timestamp is required bnxt_tx_int() hands over the ownership of the completed skb to the PTP worker. The skb should not be used afterwards, as the worker may run before the rest of our code and free the skb, leading to a use-after-free. Since dev_kfree_skb_any() accepts NULL make the loss of ownership more obvious and set skb to NULL. Fixes: 83bb623c ("bnxt_en: Transmit and retrieve packet timestamps") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220921201005.335390-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Liang He authored
In prestera_port_sfp_bind(), there are two refcounting bugs: (1) we should call of_node_get() before of_find_node_by_name() as it will automaitcally decrease the refcount of 'from' argument; (2) we should call of_node_put() for the break of the iteration for_each_child_of_node() as it will automatically increase and decrease the 'child'. Fixes: 52323ef7 ("net: marvell: prestera: add phylink support") Signed-off-by: Liang He <windhl@126.com> Reviewed-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Link: https://lore.kernel.org/r/20220921133245.4111672-1-windhl@126.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Hangyu Hua authored
tfilter_put need to be called to put the refount got by tp->ops->get to avoid possible refcount leak when chain->tmplt_ops != NULL and chain->tmplt_ops != tp->ops. Fixes: 7d5509fa ("net: sched: extend proto ops with 'put' callback") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Link: https://lore.kernel.org/r/20220921092734.31700-1-hbh25y@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Sean Anderson authored
There is a separate receive path for small packets (under 256 bytes). Instead of allocating a new dma-capable skb to be used for the next packet, this path allocates a skb and copies the data into it (reusing the existing sbk for the next packet). There are two bytes of junk data at the beginning of every packet. I believe these are inserted in order to allow aligned DMA and IP headers. We skip over them using skb_reserve. Before copying over the data, we must use a barrier to ensure we see the whole packet. The current code only synchronizes len bytes, starting from the beginning of the packet, including the junk bytes. However, this leaves off the final two bytes in the packet. Synchronize the whole packet. To reproduce this problem, ping a HME with a payload size between 17 and 214 $ ping -s 17 <hme_address> which will complain rather loudly about the data mismatch. Small packets (below 60 bytes on the wire) do not have this issue. I suspect this is related to the padding added to increase the minimum packet size. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220920235018.1675956-1-seanga2@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Peilin Ye authored
Prevent udp_read_skb() from flooding the syslog. Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Link: https://lore.kernel.org/r/20220921005915.2697-1-yepeilin.cs@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Jonathan Toppins says: ==================== bonding: fix NULL deref in bond_rr_gen_slave_id Fix a NULL dereference of the struct bonding.rr_tx_counter member because if a bond is initially created with an initial mode != zero (Round Robin) the memory required for the counter is never created and when the mode is changed there is never any attempt to verify the memory is allocated upon switching modes. ==================== Link: https://lore.kernel.org/r/cover.1663694476.git.jtoppins@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jonathan Toppins authored
This bonding selftest used to cause a kernel oops on aarch64 and should be architectures agnostic. Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jonathan Toppins authored
Fix a NULL dereference of the struct bonding.rr_tx_counter member because if a bond is initially created with an initial mode != zero (Round Robin) the memory required for the counter is never created and when the mode is changed there is never any attempt to verify the memory is allocated upon switching modes. This causes the following Oops on an aarch64 machine: [ 334.686773] Unable to handle kernel paging request at virtual address ffff2c91ac905000 [ 334.694703] Mem abort info: [ 334.697486] ESR = 0x0000000096000004 [ 334.701234] EC = 0x25: DABT (current EL), IL = 32 bits [ 334.706536] SET = 0, FnV = 0 [ 334.709579] EA = 0, S1PTW = 0 [ 334.712719] FSC = 0x04: level 0 translation fault [ 334.717586] Data abort info: [ 334.720454] ISV = 0, ISS = 0x00000004 [ 334.724288] CM = 0, WnR = 0 [ 334.727244] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000008044d662000 [ 334.733944] [ffff2c91ac905000] pgd=0000000000000000, p4d=0000000000000000 [ 334.740734] Internal error: Oops: 96000004 [#1] SMP [ 334.745602] Modules linked in: bonding tls veth rfkill sunrpc arm_spe_pmu vfat fat acpi_ipmi ipmi_ssif ixgbe igb i40e mdio ipmi_devintf ipmi_msghandler arm_cmn arm_dsu_pmu cppc_cpufreq acpi_tad fuse zram crct10dif_ce ast ghash_ce sbsa_gwdt nvme drm_vram_helper drm_ttm_helper nvme_core ttm xgene_hwmon [ 334.772217] CPU: 7 PID: 2214 Comm: ping Not tainted 6.0.0-rc4-00133-g64ae13ed #4 [ 334.779950] Hardware name: GIGABYTE R272-P31-00/MP32-AR1-00, BIOS F18v (SCP: 1.08.20211002) 12/01/2021 [ 334.789244] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 334.796196] pc : bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.801691] lr : bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.807962] sp : ffff8000221733e0 [ 334.811265] x29: ffff8000221733e0 x28: ffffdbac8572d198 x27: ffff80002217357c [ 334.818392] x26: 000000000000002a x25: ffffdbacb33ee000 x24: ffff07ff980fa000 [ 334.825519] x23: ffffdbacb2e398ba x22: ffff07ff98102000 x21: ffff07ff981029c0 [ 334.832646] x20: 0000000000000001 x19: ffff07ff981029c0 x18: 0000000000000014 [ 334.839773] x17: 0000000000000000 x16: ffffdbacb1004364 x15: 0000aaaabe2f5a62 [ 334.846899] x14: ffff07ff8e55d968 x13: ffff07ff8e55db30 x12: 0000000000000000 [ 334.854026] x11: ffffdbacb21532e8 x10: 0000000000000001 x9 : ffffdbac857178ec [ 334.861153] x8 : ffff07ff9f6e5a28 x7 : 0000000000000000 x6 : 000000007c2b3742 [ 334.868279] x5 : ffff2c91ac905000 x4 : ffff2c91ac905000 x3 : ffff07ff9f554400 [ 334.875406] x2 : ffff2c91ac905000 x1 : 0000000000000001 x0 : ffff07ff981029c0 [ 334.882532] Call trace: [ 334.884967] bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.890109] bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.896033] __bond_start_xmit+0x128/0x3a0 [bonding] [ 334.901001] bond_start_xmit+0x54/0xb0 [bonding] [ 334.905622] dev_hard_start_xmit+0xb4/0x220 [ 334.909798] __dev_queue_xmit+0x1a0/0x720 [ 334.913799] arp_xmit+0x3c/0xbc [ 334.916932] arp_send_dst+0x98/0xd0 [ 334.920410] arp_solicit+0xe8/0x230 [ 334.923888] neigh_probe+0x60/0xb0 [ 334.927279] __neigh_event_send+0x3b0/0x470 [ 334.931453] neigh_resolve_output+0x70/0x90 [ 334.935626] ip_finish_output2+0x158/0x514 [ 334.939714] __ip_finish_output+0xac/0x1a4 [ 334.943800] ip_finish_output+0x40/0xfc [ 334.947626] ip_output+0xf8/0x1a4 [ 334.950931] ip_send_skb+0x5c/0x100 [ 334.954410] ip_push_pending_frames+0x3c/0x60 [ 334.958758] raw_sendmsg+0x458/0x6d0 [ 334.962325] inet_sendmsg+0x50/0x80 [ 334.965805] sock_sendmsg+0x60/0x6c [ 334.969286] __sys_sendto+0xc8/0x134 [ 334.972853] __arm64_sys_sendto+0x34/0x4c [ 334.976854] invoke_syscall+0x78/0x100 [ 334.980594] el0_svc_common.constprop.0+0x4c/0xf4 [ 334.985287] do_el0_svc+0x38/0x4c [ 334.988591] el0_svc+0x34/0x10c [ 334.991724] el0t_64_sync_handler+0x11c/0x150 [ 334.996072] el0t_64_sync+0x190/0x194 [ 334.999726] Code: b9001062 f9403c02 d53cd044 8b040042 (b8210040) [ 335.005810] ---[ end trace 0000000000000000 ]--- [ 335.010416] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 335.017279] SMP: stopping secondary CPUs [ 335.021374] Kernel Offset: 0x5baca8eb0000 from 0xffff800008000000 [ 335.027456] PHYS_OFFSET: 0x80000000 [ 335.030932] CPU features: 0x0000,0085c029,19805c82 [ 335.035713] Memory Limit: none [ 335.038756] Rebooting in 180 seconds.. The fix is to allocate the memory in bond_open() which is guaranteed to be called before any packets are processed. Fixes: 848ca918 ("net: bonding: Use per-cpu rr_tx_counter") CC: Jussi Maki <joamaki@gmail.com> Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Michael Walle authored
Since commit ece19502 ("net: phy: micrel: 1588 support for LAN8814 phy") the handler always returns IRQ_HANDLED, except in an error case. Before that commit, the interrupt status register was checked and if it was empty, IRQ_NONE was returned. Restore that behavior to play nice with the interrupt line being shared with others. Fixes: ece19502 ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Divya Koppera <Divya.Koppera@microchip.com> Link: https://lore.kernel.org/r/20220920141619.808117-1-michael@walle.ccSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Wen Gu authored
There might be a potential race between SMC-R buffer map and link group termination. smc_smcr_terminate_all() | smc_connect_rdma() -------------------------------------------------------------- | smc_conn_create() for links in smcibdev | schedule links down | | smc_buf_create() | \- smcr_buf_map_usable_links() | \- no usable links found, | (rmb->mr = NULL) | | smc_clc_send_confirm() | \- access conn->rmb_desc->mr[]->rkey | (panic) During reboot and IB device module remove, all links will be set down and no usable links remain in link groups. In such situation smcr_buf_map_usable_links() should return an error and stop the CLC flow accessing to uninitialized mr. Fixes: b9247544 ("net/smc: convert static link ID instances to support multiple links") Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Link: https://lore.kernel.org/r/1663656189-32090-1-git-send-email-guwen@linux.alibaba.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Ard Biesheuvel authored
We currently check the MokSBState variable to decide whether we should treat UEFI secure boot as being disabled, even if the firmware thinks otherwise. This is used by shim to indicate that it is not checking signatures on boot images. In the kernel, we use this to relax lockdown policies. However, in cases where shim is not even being used, we don't want this variable to interfere with lockdown, given that the variable may be non-volatile and therefore persist across a reboot. This means setting it once will persistently disable lockdown checks on a given system. So switch to the mirrored version of this variable, called MokSBStateRT, which is supposed to be volatile, and this is something we can check. Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Peter Jones <pjones@redhat.com>
-
Ard Biesheuvel authored
When booting the x86 kernel via EFI using the LoadImage/StartImage boot services [as opposed to the deprecated EFI handover protocol], the setup header is taken from the image directly, and given that EFI's LoadImage has no Linux/x86 specific knowledge regarding struct bootparams or struct setup_header, any absolute addresses in the setup header must originate from the file and not from a prior loading stage. Since we cannot generally predict where LoadImage() decides to load an image (*), such absolute addresses must be treated as suspect: even if a prior boot stage intended to make them point somewhere inside the [signed] image, there is no way to validate that, and if they point at an arbitrary location in memory, the setup_data nodes will not be covered by any signatures or TPM measurements either, and could be made to contain an arbitrary sequence of SETUP_xxx nodes, which could interfere quite badly with the early x86 boot sequence. (*) Note that, while LoadImage() does take a buffer/size tuple in addition to a device path, which can be used to provide the image contents directly, it will re-allocate such images, as the memory footprint of an image is generally larger than the PE/COFF file representation. Cc: <stable@vger.kernel.org> # v5.10+ Link: https://lore.kernel.org/all/20220904165321.1140894-1-Jason@zx2c4.com/Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2022-09-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes 2 gem context related fixes: - to avoid a general protection failure when using perf/OA (Chris) - to avoid kernel warnings on driver release (Janusz) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Yyt1CV+YIjKQZZMB@intel.com
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-09-20 (ice) Michal re-sets TC configuration when changing number of queues. Mateusz moves the check and call for link-down-on-close to the specific path for downing/closing the interface. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix interface being down after reset with link-down-on-close flag on ice: config netdev tc before setting queues number ==================== Link: https://lore.kernel.org/r/20220920205344.1860934-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Larysa Zaremba authored
The original patch added the static branch to handle the situation, when assigning an XDP TX queue to every CPU is not possible, so they have to be shared. However, in the XDP transmit handler ice_xdp_xmit(), an error was returned in such cases even before static condition was checked, thus making queue sharing still impossible. Fixes: 22bf877e ("ice: introduce XDP_TX fallback path") Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/r/20220919134346.25030-1-larysa.zaremba@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-