Pull 9p fixes from Dominique Martinet:
 "Two small fixes scheduled for stable trees:

  A tracepoint fix that's been reading past the end of messages forever,
  but semi-recently also went over the end of the buffer. And a
  potential incorrectly freeing garbage in pdu parsing error path"

* tag '9p-for-6.7-rc7' of https://github.com/martinetd/linux:
  net: 9p: avoid freeing uninit memory in p9pdu_vreadf
  9p: prevent read overrun in protocol dump tracepoint

Pull pin control fixes from Linus Walleij:
 "Some driver fixes for v6.7, all are in drivers, the most interesting
  one is probably the AMD laptop suspend bug which really needs fixing.
  Freedestop org has the bug description:

    https://gitlab.freedesktop.org/drm/amd/-/issues/2812

  Summary:

   - Ignore disabled device tree nodes in the Starfive 7100 and 7100
     drivers.

   - Mask non-wake source pins with interrupt enabled at suspend in the
     AMD driver, this blocks unnecessary wakeups from misc interrupts.
     This can be power consuming because in many cases the system
     doesn't really suspend, it just wakes right back up.

   - Fix a typo breaking compilation of the cy8c95x0 driver, and fix up
     bugs in the get/set config callbacks.

   - Use a dedicated lock class for the PIO4 drivers IRQ. This fixes a
     crash on suspend"

* tag 'pinctrl-v6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: at91-pio4: use dedicated lock class for IRQ
  pinctrl: cy8c95x0: Fix get_pincfg
  pinctrl: cy8c95x0: Fix regression
  pinctrl: cy8c95x0: Fix typo
  pinctrl: amd: Mask non-wake source pins with interrupt enabled at suspend
  pinctrl: starfive: jh7100: ignore disabled device tree nodes
  pinctrl: starfive: jh7110: ignore disabled device tree nodes

When an afs_volume struct is put, its refcount is reduced to 0 before
the cell->volume_lock is taken and the volume removed from the
cell->volumes tree.

Unfortunately, this means that the lookup code can race and see a volume
with a zero ref in the tree, resulting in a use-after-free:

    refcount_t: addition on 0; use-after-free.
    WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda
    ...
    RIP: 0010:refcount_warn_saturate+0x7a/0xda
    ...
    Call Trace:
     afs_get_volume+0x3d/0x55
     afs_create_volume+0x126/0x1de
     afs_validate_fc+0xfe/0x130
     afs_get_tree+0x20/0x2e5
     vfs_get_tree+0x1d/0xc9
     do_new_mount+0x13b/0x22e
     do_mount+0x5d/0x8a
     __do_sys_mount+0x100/0x12a
     do_syscall_64+0x3a/0x94
     entry_SYSCALL_64_after_hwframe+0x62/0x6a

Fix this by:

 (1) When putting, use a flag to indicate if the volume has been removed
     from the tree and skip the rb_erase if it has.

 (2) When looking up, use a conditional ref increment and if it fails
     because the refcount is 0, replace the node in the tree and set the
     removal flag.

Fixes: 20325960 ("afs: Reorganise volume and server trees to be rooted on the cell")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The IDA usually detects double-frees, but that detection failed to
consider the case when there are no nearby IDs allocated and so we have a
NULL bitmap rather than simply having a clear bit.  Add some tests to the
test-suite to be sure we don't inadvertently reintroduce this problem.
Unfortunately they're quite noisy so include a message to disregard
the warnings.
Reported-by: Zhenghan Wang <wzhmmmmm@gmail.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In afs_update_cell(), ret is the result of the DNS lookup and the errors
are to be handled by a switch - however, the value gets clobbered in
between by setting it to -ENOMEM in case afs_alloc_vlserver_list()
fails.

Fix this by moving the setting of -ENOMEM into the error handling for
OOM failure.  Further, only do it if we don't have an alternative error
to return.

Found by Linux Verification Center (linuxtesting.org) with SVACE.  Based
on a patch from Anastasia Belova [1].

Fixes: d5c32c89 ("afs: Fix cell DNS lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Anastasia Belova <abelova@astralinux.ru>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: lvc-project@linuxtesting.org
Link: https://lore.kernel.org/r/20231221085849.1463-1-abelova@astralinux.ru/ [1]
Link: https://lore.kernel.org/r/1700862.1703168632@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull AFS fixes from David Howells:
 "Improve the interaction of arbitrary lookups in the AFS dynamic root
  that hit DNS lookup failures [1] where kafs behaves differently from
  openafs and causes some applications to fail that aren't expecting
  that. Further, negative DNS results aren't getting removed and are
  causing failures to persist.

   - Always delete unused (particularly negative) dentries as soon as
     possible so that they don't prevent future lookups from retrying.

   - Fix the handling of new-style negative DNS lookups in ->lookup() to
     make them return ENOENT so that userspace doesn't get confused when
     stat succeeds but the following open on the looked up file then
     fails.

   - Fix key handling so that DNS lookup results are reclaimed almost as
     soon as they expire rather than sitting round either forever or for
     an additional 5 mins beyond a set expiry time returning
     EKEYEXPIRED. They persist for 1s as /bin/ls will do a second stat
     call if the first fails"

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637 [1]
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>

* tag 'afs-fixes-20231221' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  keys, dns: Allow key types (eg. DNS) to be reclaimed immediately on expiry
  afs: Fix dynamic root lookup DNS check
  afs: Fix the dynamic root's d_delete to always delete unused dentries

Pull tracing fixes from Steven Rostedt:

 - Fix another kerneldoc warning

 - Fix eventfs files to inherit the ownership of its parent directory.

   The dynamic creation of dentries in eventfs did not take into account
   if the tracefs file system was mounted with a gid/uid, and would
   still default to the gid/uid of root. This is a regression.

 - Fix warning when synthetic event testing is enabled along with
   startup event tracing testing is enabled

* tag 'trace-v6.7-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing / synthetic: Disable events after testing in synth_event_gen_test_init()
  eventfs: Have event files and directories default to parent uid and gid
  tracing/synthetic: fix kernel-doc warnings

Pull networking fixes from Paolo Abeni:
 "Including fixes from WiFi and bpf.

  Current release - regressions:

   - bpf: syzkaller found null ptr deref in unix_bpf proto add

   - eth: i40e: fix ST code value for clause 45

  Previous releases - regressions:

   - core: return error from sk_stream_wait_connect() if sk_wait_event()
     fails

   - ipv6: revert remove expired routes with a separated list of routes

   - wifi rfkill:
       - set GPIO direction
       - fix crash with WED rx support enabled

   - bluetooth:
       - fix deadlock in vhci_send_frame
       - fix use-after-free in bt_sock_recvmsg

   - eth: mlx5e: fix a race in command alloc flow

   - eth: ice: fix PF with enabled XDP going no-carrier after reset

   - eth: bnxt_en: do not map packet buffers twice

  Previous releases - always broken:

   - core:
       - check vlan filter feature in vlan_vids_add_by_dev() and
         vlan_vids_del_by_dev()
       - check dev->gso_max_size in gso_features_check()

   - mptcp: fix inconsistent state on fastopen race

   - phy: skip LED triggers on PHYs on SFP modules

   - eth: mlx5e:
       - fix double free of encap_header
       - fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()"

* tag 'net-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
  net: check dev->gso_max_size in gso_features_check()
  kselftest: rtnetlink.sh: use grep_fail when expecting the cmd fail
  net/ipv6: Revert remove expired routes with a separated list of routes
  net: avoid build bug in skb extension length calculation
  net: ethernet: mtk_wed: fix possible NULL pointer dereference in mtk_wed_wo_queue_tx_clean()
  net: stmmac: fix incorrect flag check in timestamp interrupt
  selftests: add vlan hw filter tests
  net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()
  net: hns3: add new maintainer for the HNS3 ethernet driver
  net: mana: select PAGE_POOL
  net: ks8851: Fix TX stall caused by TX buffer overrun
  ice: Fix PF with enabled XDP going no-carrier after reset
  ice: alter feature support check for SRIOV and LAG
  ice: stop trashing VF VSI aggregator node ID information
  mailmap: add entries for Geliang Tang
  mptcp: fill in missing MODULE_DESCRIPTION()
  mptcp: fix inconsistent state on fastopen race
  selftests: mptcp: join: fix subflow_send_ack lookup
  net: phy: skip LED triggers on PHYs on SFP modules
  bpf: Add missing BPF_LINK_TYPE invocations
  ...

The synth_event_gen_test module can be built in, if someone wants to run
the tests at boot up and not have to load them.

The synth_event_gen_test_init() function creates and enables the synthetic
events and runs its tests.

The synth_event_gen_test_exit() disables the events it created and
destroys the events.

If the module is builtin, the events are never disabled. The issue is, the
events should be disable after the tests are run. This could be an issue
if the rest of the boot up tests are enabled, as they expect the events to
be in a known state before testing. That known state happens to be
disabled.

When CONFIG_SYNTH_EVENT_GEN_TEST=y and CONFIG_EVENT_TRACE_STARTUP_TEST=y
a warning will trigger:

 Running tests on trace events:
 Testing event create_synth_test:
 Enabled event during self test!
 ------------[ cut here ]------------
 WARNING: CPU: 2 PID: 1 at kernel/trace/trace_events.c:4150 event_trace_self_tests+0x1c2/0x480
 Modules linked in:
 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc2-test-00031-gb803d7c6-dirty #276
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
 RIP: 0010:event_trace_self_tests+0x1c2/0x480
 Code: bb e8 a2 ab 5d fc 48 8d 7b 48 e8 f9 3d 99 fc 48 8b 73 48 40 f6 c6 01 0f 84 d6 fe ff ff 48 c7 c7 20 b6 ad bb e8 7f ab 5d fc 90 <0f> 0b 90 48 89 df e8 d3 3d 99 fc 48 8b 1b 4c 39 f3 0f 85 2c ff ff
 RSP: 0000:ffffc9000001fdc0 EFLAGS: 00010246
 RAX: 0000000000000029 RBX: ffff88810399ca80 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffffb9f19478 RDI: ffff88823c734e64
 RBP: ffff88810399f300 R08: 0000000000000000 R09: fffffbfff79eb32a
 R10: ffffffffbcf59957 R11: 0000000000000001 R12: ffff888104068090
 R13: ffffffffbc89f0a0 R14: ffffffffbc8a0f08 R15: 0000000000000078
 FS:  0000000000000000(0000) GS:ffff88823c700000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 00000001f6282001 CR4: 0000000000170ef0
 Call Trace:
  <TASK>
  ? __warn+0xa5/0x200
  ? event_trace_self_tests+0x1c2/0x480
  ? report_bug+0x1f6/0x220
  ? handle_bug+0x6f/0x90
  ? exc_invalid_op+0x17/0x50
  ? asm_exc_invalid_op+0x1a/0x20
  ? tracer_preempt_on+0x78/0x1c0
  ? event_trace_self_tests+0x1c2/0x480
  ? __pfx_event_trace_self_tests_init+0x10/0x10
  event_trace_self_tests_init+0x27/0xe0
  do_one_initcall+0xd6/0x3c0
  ? __pfx_do_one_initcall+0x10/0x10
  ? kasan_set_track+0x25/0x30
  ? rcu_is_watching+0x38/0x60
  kernel_init_freeable+0x324/0x450
  ? __pfx_kernel_init+0x10/0x10
  kernel_init+0x1f/0x1e0
  ? _raw_spin_unlock_irq+0x33/0x50
  ret_from_fork+0x34/0x60
  ? __pfx_kernel_init+0x10/0x10
  ret_from_fork_asm+0x1b/0x30
  </TASK>

This is because the synth_event_gen_test_init() left the synthetic events
that it created enabled. By having it disable them after testing, the
other selftests will run fine.

Link: https://lore.kernel.org/linux-trace-kernel/20231220111525.2f0f49b0@gandalf.local.home

Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 9fe41efa ("tracing: Add synth event generation test module")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: Alexander Graf <graf@amazon.com>
Tested-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Dongliang reported:

  I found that in the latest version, the nodes of tracefs have been
  changed to dynamically created.

  This has caused me to encounter a problem where the gid I specified in
  the mounting parameters cannot apply to all files, as in the following
  situation:

  /data/tmp/events # mount | grep tracefs
  tracefs on /data/tmp type tracefs (rw,seclabel,relatime,gid=3012)

  gid 3012 = readtracefs

  /data/tmp # ls -lh
  total 0
  -r--r-----   1 root readtracefs 0 1970-01-01 08:00 README
  -r--r-----   1 root readtracefs 0 1970-01-01 08:00 available_events

  ums9621_1h10:/data/tmp/events # ls -lh
  total 0
  drwxr-xr-x 2 root root 0 2023-12-19 00:56 alarmtimer
  drwxr-xr-x 2 root root 0 2023-12-19 00:56 asoc

  It will prevent certain applications from accessing tracefs properly, I
  try to avoid this issue by making the following modifications.

To fix this, have the files created default to taking the ownership of
the parent dentry unless the ownership was previously set by the user.

Link: https://lore.kernel.org/linux-trace-kernel/1703063706-30539-1-git-send-email-dongliang.cui@unisoc.com/
Link: https://lore.kernel.org/linux-trace-kernel/20231220105017.1489d790@gandalf.local.home

Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Hongyu Jin  <hongyu.jin@unisoc.com>
Fixes: 28e12c09 ("eventfs: Save ownership and mode")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: Dongliang Cui <cuidongliang390@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

If a key has an expiration time, then when that time passes, the key is
left around for a certain amount of time before being collected (5 mins by
default) so that EKEYEXPIRED can be returned instead of ENOKEY.  This is a
problem for DNS keys because we want to redo the DNS lookup immediately at
that point.

Fix this by allowing key types to be marked such that keys of that type
don't have this extra period, but are reclaimed as soon as they expire and
turn this on for dns_resolver-type keys.  To make this easier to handle,
key->expiry is changed to be permanent if TIME64_MAX rather than 0.

Furthermore, give such new-style negative DNS results a 1s default expiry
if no other expiry time is set rather than allowing it to stick around
indefinitely.  This shouldn't be zero as ls will follow a failing stat call
immediately with a second with AT_SYMLINK_NOFOLLOW added.

Fixes: 1a4240f4 ("DNS: Separate out CIFS DNS Resolver code")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Wang Lei <wang840925@gmail.com>
cc: Jeff Layton <jlayton@redhat.com>
cc: Steve French <smfrench@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: keyrings@vger.kernel.org
cc: netdev@vger.kernel.org

Daniel Borkmann says:

====================
pull-request: bpf 2023-12-21

Hi David, hi Jakub, hi Paolo, hi Eric,

The following pull-request contains BPF updates for your *net* tree.

We've added 3 non-merge commits during the last 5 day(s) which contain
a total of 4 files changed, 45 insertions(+).

The main changes are:

1) Fix a syzkaller splat which triggered an oob issue in bpf_link_show_fdinfo(),
   from Jiri Olsa.

2) Fix another syzkaller-found issue which triggered a NULL pointer dereference
   in BPF sockmap for unconnected unix sockets, from John Fastabend.

bpf-for-netdev

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Add missing BPF_LINK_TYPE invocations
  bpf: sockmap, test for unconnected af_unix sock
  bpf: syzkaller found null ptr deref in unix_bpf proto add
====================

Link: https://lore.kernel.org/r/20231221104844.1374-1-daniel@iogearbox.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Some drivers might misbehave if TSO packets get too big.

GVE for instance uses a 16bit field in its TX descriptor,
and will do bad things if a packet is bigger than 2^16 bytes.

Linux TCP stack honors dev->gso_max_size, but there are
other ways for too big packets to reach an ndo_start_xmit()
handler : virtio_net, af_packet, GRO...

Add a generic check in gso_features_check() and fallback
to GSO when needed.

gso_max_size was added in the blamed commit.

Fixes: 82cc1a7a ("[NET]: Add per-connection option to set max TSO frame size")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219125331.4127498-1-edumazet@google.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

run_cmd_grep_fail should be used when expecting the cmd fail, or the ret
will be set to 1, and the total test return 1 when exiting. This would cause
the result report to fail if run via run_kselftest.sh.

Before fix:
 # ./rtnetlink.sh -t kci_test_addrlft
 PASS: preferred_lft addresses have expired
 # echo $?
 1

After fix:
 # ./rtnetlink.sh -t kci_test_addrlft
 PASS: preferred_lft addresses have expired
 # echo $?
 0

Fixes: 9c2a19f7 ("kselftest: rtnetlink.sh: add verbose flag")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231219065737.1725120-1-liuhangbin@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep
warning:

 ============================================
 WARNING: possible recursive locking detected
 6.7.0-rc5-wt+ #532 Not tainted
 --------------------------------------------
 sh/92 is trying to acquire lock:
 c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100

 but task is already holding lock:
 c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&irq_desc_lock_class);
   lock(&irq_desc_lock_class);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 6 locks held by sh/92:
  #0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178
  #1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284
  #2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284
  #3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8
  #4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c
  #5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100

 stack backtrace:
 CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532
 Hardware name: Atmel SAMA5
  unwind_backtrace from show_stack+0x18/0x1c
  show_stack from dump_stack_lvl+0x34/0x48
  dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c
  __lock_acquire from lock_acquire.part.0+0x124/0x2d0
  lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78
  _raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100
  __irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204
  irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4
  atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204
  irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8
  gpio_keys_suspend from dpm_run_callback+0xe4/0x248
  dpm_run_callback from __device_suspend+0x234/0x91c
  __device_suspend from dpm_suspend+0x224/0x43c
  dpm_suspend from dpm_suspend_start+0x9c/0xa8
  dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84
  suspend_devices_and_enter from pm_suspend+0x460/0x4e8
  pm_suspend from state_store+0x78/0xe4
  state_store from kernfs_fop_write_iter+0x1a0/0x284
  kernfs_fop_write_iter from vfs_write+0x38c/0x6f4
  vfs_write from ksys_write+0xd8/0x178
  ksys_write from ret_fast_syscall+0x0/0x1c
 Exception stack(0xc52b3fa8 to 0xc52b3ff0)
 3fa0:                   00000004 005a0ae8 00000001 005a0ae8 00000004 00000001
 3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190
 3fe0: 00000004 b6c61678 aec5a041 aebf1a26

This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever
a wake up source configures an IRQ through irq_set_irq_wake, it will
lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent"
IRQ which will do the same on its own IRQ desc, but since those two locks
share the same class, lockdep reports this as an issue.

Fix lockdep false positive by setting a different class for parent and
children IRQ

Fixes: 77618084 ("pinctrl: introduce driver for Atmel PIO4 controller")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20231215-lockdep_warning-v1-1-8137b2510ed5@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

This reverts commit 3dec89b1.

The commit has some race conditions given how expires is managed on a
fib6_info in relation to gc start, adding the entry to the gc list and
setting the timer value leading to UAF. Revert the commit and try again
in a later release.

Fixes: 3dec89b1 ("net/ipv6: Remove expired routes with a separated list of routes")
Cc: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219030243.25687-1-dsahern@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-12-18 (ice)

This series contains updates to ice driver only.

Jakes stops clearing of needed aggregator information.

Dave adds a check for LAG device support before initializing the
associated event handler.

Larysa restores accounting of XDP queues in TC configurations.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: Fix PF with enabled XDP going no-carrier after reset
  ice: alter feature support check for SRIOV and LAG
  ice: stop trashing VF VSI aggregator node ID information
====================

Link: https://lore.kernel.org/r/20231218192708.3397702-1-anthony.l.nguyen@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

GCC seems to incorrectly fail to evaluate skb_ext_total_length() at
compile time under certain conditions.

The issue even occurs if all values in skb_ext_type_len[] are "0",
ruling out the possibility of an actual overflow.

As the patch has been in mainline since v6.6 without triggering the
problem it seems to be a very uncommon occurrence.

As the issue only occurs when -fno-tree-loop-im is specified as part of
CFLAGS_GCOV, disable the BUILD_BUG_ON() only when building with coverage
reporting enabled.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312171924.4FozI5FG-lkp@intel.com/Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/487cfd35-fe68-416f-9bfd-6bb417f98304@app.fastmail.com/
Fixes: 5d21d0a6 ("net: generalize calculation of skb extensions length")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231218-net-skbuff-build-bug-v1-1-eefc2fb0a7d3@weissschuh.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

In order to avoid a NULL pointer dereference, check entry->buf pointer before running
skb_free_frag in mtk_wed_wo_queue_tx_clean routine.

Fixes: 79968444 ("net: ethernet: mtk_wed: introduce wed wo support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/3c1262464d215faa8acebfc08869798c81c96f4a.1702827359.git.lorenzo@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Only the posix timer system calls use this (when the posix timer support
is disabled, which does not actually happen in any normal case), because
they had debug code to print out a warning about missing system calls.

Get rid of that special case, and just use the standard COND_SYSCALL
interface that creates weak system call stubs that return -ENOSYS for
when the system call does not exist.

This fixes a kCFI issue with the SYS_NI() hackery:

  CFI failure at int80_emulation+0x67/0xb0 (target: sys_ni_posix_timers+0x0/0x70; expected type: 0xb02b34d9)
  WARNING: CPU: 0 PID: 48 at int80_emulation+0x67/0xb0
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull smb client fixes from Steve French:

 - two multichannel reconnect fixes, one fixing an important refcounting
   problem that can lead to umount problems

 - atime fix

 - five fixes for various potential OOB accesses, including a CVE fix,
   and two additional fixes for problems pointed out by Robert Morris's
   fuzzing investigation

* tag '6.7-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: do not let cifs_chan_update_iface deallocate channels
  cifs: fix a pending undercount of srv_count
  fs: cifs: Fix atime update check
  smb: client: fix potential OOB in smb2_dump_detail()
  smb: client: fix potential OOB in cifs_dump_detail()
  smb: client: fix OOB in smbCalcSize()
  smb: client: fix OOB in SMB2_query_info_init()
  smb: client: fix OOB in cifsd when receiving compounded resps

Pull s390 fixes from Alexander Gordeev:

 - Fix virtual vs physical address confusion in Storage Class Memory
   (SCM) block device driver.

 - Fix saving and restoring of FPU kernel context, which could lead to
   corruption of vector registers 8-15

 - Update defconfigs

* tag 's390-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: update defconfigs
  s390/vx: fix save/restore of fpu kernel context
  s390/scm: fix virtual vs physical address confusion

Pull ARM SoC fixes from Arnd Bergmann:
 "There are only a handful of bugfixes this time, which feels almost too
  small, so I hope we are not missing something important.

   - One more mediatek dts warning fix after the previous larger set,
     this should finally result in a clean defconfig build.

   - TI OMAP dts fixes for a spurious hang on am335x and invalid data on
     DTA7

   - One DTS fix for ethernet on Oriange Pi Zero (Allwinner H616)

   - A regression fix for ti-sysc interconnect target module driver to
     not access registers after reset if srst_udelay quirk is needed

   - Reset controller driver fixes for a crash during error handling and
     a build warning"

* tag 'soc-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: mediatek: mt8395-genio-1200-evk: add interrupt-parent for mt6360
  ARM: dts: Fix occasional boot hang for am3 usb
  reset: Fix crash when freeing non-existent optional resets
  ARM: OMAP2+: Fix null pointer dereference and memory leak in omap_soc_device_init
  ARM: dts: dra7: Fix DRA7 L3 NoC node register size
  bus: ti-sysc: Flush posted write only after srst_udelay
  reset: hisilicon: hi6220: fix Wvoid-pointer-to-enum-cast warning
  arm64: dts: allwinner: h616: update emac for Orange Pi Zero 3

Merge tag 'platform-drivers-x86-v6.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform drivers fixes from Ilpo Järvinen:

 - Fan reporting on some ThinkPads

 - Laptop 13 spurious keypresses while suspended

 - Intel PMC correction to avoid crash

* tag 'platform-drivers-x86-v6.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/amd/pmc: Disable keyboard wakeup on AMD Framework 13
  platform/x86/amd/pmc: Move keyboard wakeup disablement detection to pmc-quirks
  platform/x86/amd/pmc: Only run IRQ1 firmware version check on Cezanne
  platform/x86/amd/pmc: Move platform defines to header
  platform/x86/intel/pmc: Fix hang in pmc_core_send_ltr_ignore()
  platform/x86: thinkpad_acpi: fix for incorrect fan reporting on some ThinkPad systems

Pull overlayfs fix from Amir Goldstein:
 "Fix a regression from this merge window"

* tag 'ovl-fixes-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
  ovl: fix dentry reference leak after changes to underlying layers

Pull more bcachefs fixes from Kent Overstreet:

 - Fix a deadlock in the data move path with nocow locks (vs. update in
   place writes); when trylock failed we were incorrectly waiting for in
   flight ios to flush.

 - Fix reporting of NFS file handle length

 - Fix early error path in bch2_fs_alloc() - list head wasn't being
   initialized early enough

 - Make sure correct (hardware accelerated) crc modules get loaded

 - Fix a rare overflow in the btree split path, when the packed bkey
   format grows and all the keys have no value (LRU btree).

 - Fix error handling in the sector allocator

   This was causing writes to spuriously fail in multidevice setups, and
   another bug meant that the errors weren't being logged, only reported
   via fsync.

* tag 'bcachefs-2023-12-19' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: Fix bch2_alloc_sectors_start_trans() error handling
  bcachefs; guard against overflow in btree node split
  bcachefs: btree_node_u64s_with_format() takes nr keys
  bcachefs: print explicit recovery pass message only once
  bcachefs: improve modprobe support by providing softdeps
  bcachefs: fix invalid memory access in bch2_fs_alloc() error path
  bcachefs: Fix determining required file handle length
  bcachefs: Fix nocow locks deadlock

Pull nfsd fixes from Chuck Lever:

 - Address a few recently-introduced issues

* tag 'nfsd-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Revert 5f7fc5d6
  NFSD: Revert 738401a9
  NFSD: Revert 6c41d9a9
  nfsd: hold nfsd_mutex across entire netlink operation
  nfsd: call nfsd_last_thread() before final nfsd_put()

Merge tag 'dm-6.7/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - DM raid target (and MD raid) fix for reconfig_mutex MD deadlock that
   should have been merged along with recent v6.7-rc6 MD fixes (see MD
   related commits: f2d87a75^..b3911334)

 - DM integrity target fix to avoid modifying immutable biovec in the
   integrity_metadata() edge case where kmalloc fails.

 - Fix drivers/md/Kconfig so DM_AUDIT depends on BLK_DEV_DM.

 - Update DM entry in MAINTAINERS to remove stale info.

* tag 'dm-6.7/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  MAINTAINERS: remove stale info for DEVICE-MAPPER
  dm audit: fix Kconfig so DM_AUDIT depends on BLK_DEV_DM
  dm-integrity: don't modify bio's immutable bio_vec in integrity_metadata()
  dm-raid: delay flushing event_work() after reconfig_mutex is released

scripts/kernel-doc warns about using @args: for variadic arguments to
functions. Documentation/doc-guide/kernel-doc.rst says that this should
be written as @...: instead, so update the source code to match that,
preventing the warnings.

trace_events_synth.c:1165: warning: Excess function parameter 'args' description in '__synth_event_gen_cmd_start'
trace_events_synth.c:1714: warning: Excess function parameter 'args' description in 'synth_event_trace'

Link: https://lore.kernel.org/linux-trace-kernel/20231220061226.30962-1-rdunlap@infradead.org

Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 35ca5207 ("tracing: Add synthetic event command generation functions")
Fixes: 8dcc53ad ("tracing: Add synth_event_trace() and related functions")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

This patch fix the warning introduced by mt6360 node in
mt8395-genio-1200-evk.dts.

arch/arm64/boot/dts/mediatek/mt8195.dtsi:464.4-27: Warning (interrupts_property): /soc/i2c@11d01000/pmic@34:#interrupt-cells: size is (8), expected multiple of 16

Add a missing 'interrupt-parent' to fix this warning.

Fixes: f2b543a1 ("arm64: dts: mediatek: add device-tree for Genio 1200 EVK board")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-devicetree/20231212214737.230115-1-arnd@kernel.org/Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'am3-usb-hang-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fix for occasional boot hang for am335x USB

A fix for occasional boot hang for am335x USB that I've only recently
started noticing.

This can be merged naturally whenever suitable. This issue has been seen
with other similar SoCs earlier and has clearly existed for a long time.

* tag 'am3-usb-hang-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Fix occasional boot hang for am3 usb

Link: https://lore.kernel.org/r/pull-1703071616-395333@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v6.7/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omaps

A few fixes for omaps:

- A regression fix for ti-sysc interconnect target module driver to not access
  registers after reset if srst_udelay quirk is needed

- DRA7 L3 NoC node register size fix

* tag 'omap-for-v6.7/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Fix null pointer dereference and memory leak in omap_soc_device_init
  ARM: dts: dra7: Fix DRA7 L3 NoC node register size
  bus: ti-sysc: Flush posted write only after srst_udelay

Link: https://lore.kernel.org/r/pull-1702037799-781982@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Invert the register value for PIN_CONFIG_OUTPUT_ENABLE to return
the opposite of PIN_CONFIG_INPUT_ENABLE.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/r/20231219125120.4028862-3-patrick.rudolph@9elements.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Commit 1fa3df90 ("pinctrl: cy8c95x0: Remove custom ->set_config()")
removed support for PIN_CONFIG_INPUT_ENABLE and
PIN_CONFIG_OUTPUT.

Add the following options to restore functionality:
- PIN_CONFIG_INPUT_ENABLE
- PIN_CONFIG_OUTPUT_ENABLE
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/r/20231219125120.4028862-2-patrick.rudolph@9elements.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Fix typo to make pinctrl-cy8c95x compile again.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/r/20231219125120.4028862-1-patrick.rudolph@9elements.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

In the afs dynamic root directory, the ->lookup() function does a DNS check
on the cell being asked for and if the DNS upcall reports an error it will
report an error back to userspace (typically ENOENT).

However, if a failed DNS upcall returns a new-style result, it will return
a valid result, with the status field set appropriately to indicate the
type of failure - and in that case, dns_query() doesn't return an error and
we let stat() complete with no error - which can cause confusion in
userspace as subsequent calls that trigger d_automount then fail with
ENOENT.

Fix this by checking the status result from a valid dns_query() and
returning an error if it indicates a failure.

Fixes: bbb4c432 ("dns: Allow the dns resolver to retrieve a server set")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216637Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

Fix the afs dynamic root's d_delete function to always delete unused
dentries rather than only deleting them if they're positive.  With things
as they stand upstream, negative dentries stemming from failed DNS lookups
stick around preventing retries.

Fixes: 66c7e1d3 ("afs: Split the dynroot stuff out and give it its own ops tables")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

The driver should continue get the timestamp if STMMAC_FLAG_EXT_SNAPSHOT_EN
flag is set.

Fixes: aa5513f5 ("net: stmmac: replace the ext_snapshot_en field with a flag")
Cc: <stable@vger.kernel.org> # 6.6
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Lai Peter Jun Ann <jun.ann.lai@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Add encryption key size check when acting as peripheral
 - Shut up false-positive build warning
 - Send reject if L2CAP command request is corrupted
 - Fix Use-After-Free in bt_sock_recvmsg
 - Fix not notifying when connection encryption changes
 - Fix not checking if HCI_OP_INQUIRY has been sent
 - Fix address type send over to the MGMT interface
 - Fix deadlock in vhci_send_frame
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When we fail to allocate because of insufficient open buckets, we don't
want to retry from the full set of devices - we just want to retry in
blocking mode.

But if the retry in blocking mode fails with a different error code, we
end up squashing the -BCH_ERR_open_buckets_empty error with an error
that makes us thing we won't be able to allocate (insufficient_devices)
- which is incorrect when we didn't try to allocate from the full set of
devices, and causes the write to fail.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>