- 08 Apr, 2011 8 commits
-
-
Josef Bacik authored
Apparently it is ok to submit a read to an IDE device with the same target page for different offsets. This is what Windows does under qemu. The problem is under DIO we expect them to be different buffers for checksumming reasons, and so this sort of thing will result in checksum errors, when in reality the file is fine. So when reading, check to make sure that all iov bases are different, and if they aren't fall back to buffered mode, since that will work out right. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
In btrfs_get_block_direct we call btrfs_get_extent to lookup the extent for the range that we are looking for. If we don't find an extent, btrfs_get_extent will insert a extent_map for that area and mark it as a hole. So it does the job of allocating a new extent map and inserting it into the io tree. But if we're creating a new extent we free it up and redo all of that work. So instead pass the em to btrfs_new_extent_direct(), and if it will work just allocate the disk space and set it up properly and bypass the freeing/allocating of a new extent map and the expensive operation of inserting the thing into the io_tree. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
When looking at our DIO performance Chris said that for small IO's doing the async submit stuff tends to be more overhead than it's worth. With this on top of my other fixes I get about a 17-20% speedup doing a sequential dd with 4k IO's. Basically if we don't have to split the bio for the map length it's small enough to be directly submitted, otherwise go back to the async submit. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
We have been unconditionally allocating a new bio and re-adding all pages from our original bio to the new bio. This is needed if our original bio is larger than our stripe size, but if it is smaller than the stripe size then there is no need to do this. So check the map length and if we are under that then go ahead and submit the original bio. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
In the DIO code we often don't update the i_disk_size because the i_size isn't updated until after the DIO is completed, so basically we are allocating a path, doing a search, and updating the inode item for no reason since nothing changed. btrfs_ordered_update_i_size will return 1 if it didn't update i_disk_size, so only run btrfs_update_inode if btrfs_ordered_update_i_size returns 0. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
Instead of calling kmap_atomic for every thing we set in the inode item, map the entire inode item at the start and unmap it at the end. This makes a sequential dd of 400mb O_DIRECT something like 1% faster. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
I saw a lockup where we kept getting into this start transaction->commit transaction loop because of enospce. The fact is if we fail to make our reservation, we've tried _everything_ several times, so we only need to try and commit the transaction once, and if that doesn't work then we really are out of space and need to just exit. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
Currently we don't handle running out of space in the cache, so to fix this we keep track of how far in the cache we are. Then we only dirty the pages if we successfully modify all of them, otherwise if we have an error or run out of space we can just drop them and not worry about the vm writing them out. Thanks, Tested-by Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de> Signed-off-by:
Josef Bacik <josef@redhat.com>
-
- 05 Apr, 2011 10 commits
-
-
Josef Bacik authored
When I moved the orphan adding to btrfs_truncate I missed the fact that during orphan cleanup we just add the orphan items to the orphan list without going through btrfs_orphan_add, which results in lots of warnings on mount if you have any orphan items that need to be truncated. Just remove this warning since it's ok, this will allow all of the normal space accounting take place. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Josef Bacik authored
I noticed a huge problem with the free space cache that was presenting as an early ENOSPC. Turns out when writing the free space cache out I forgot to take into account pinned extents and more importantly clusters. This would result in us leaking free space everytime we unmounted the filesystem and remounted it. I fix this by making sure to check and see if the current block group has a cluster and writing out any entries that are in the cluster to the cache, as well as writing any pinned extents we currently have to the cache since those will be available for us to use the next time the fs mounts. This patch also adds a check to the end of load_free_space_cache to make sure we got the right amount of free space cache, and if not make sure to clear the cache and re-cache the old fashioned way. Signed-off-by:
Josef Bacik <josef@redhat.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Li Zefan authored
root_item->flags and root_item->byte_limit are not initialized when a subvolume is created. This bug is not revealed until we added readonly snapshot support - now you mount a btrfs filesystem and you may find the subvolumes in it are readonly. To work around this problem, we steal a bit from root_item->inode_item->flags, and use it to indicate if those fields have been properly initialized. When we read a tree root from disk, we check if the bit is set, and if not we'll set the flag and initialize the two fields of the root item. Reported-by:
Andreas Philipp <philipp.andreas@gmail.com> Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Tested-by:
Andreas Philipp <philipp.andreas@gmail.com> cc: stable@kernel.org Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Miao Xie authored
the object id of the space cache inode's key is allocated from the relative root, just like the regular file. So we can't identify space cache inode by checking the object id of the inode's key, and we have to clear __GFP_FS flag at the time we look up the space cache inode. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Yoshinori Sano authored
Free btrfs_trans_handle when join_transaction() fails in start_transaction() Signed-off-by:
Yoshinori Sano <yoshinori.sano@gmail.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Tsutomu Itoh authored
Call btrfs_end_transaction() if btrfs_commit_transaction_async() fails. Signed-off-by:
Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Johann Lombardi authored
btrfs_rename() does not release the subvol_sem if the transaction failed to start. Signed-off-by:
Johann Lombardi <johann@whamcloud.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Li Zefan authored
When we defrag a file, whose size can be fit into an inline extent, with compression enabled, the compress type is set to be fs_info->compress_type, which is 0 if the btrfs filesystem is mounted without compress option. This leads to oops. Reported-by:
Daniel Blueman <daniel.blueman@gmail.com> Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Tsutomu Itoh authored
Some mount options are not displayed by /proc/mounts. This patch displays the option such as compress_type by /proc/mounts. Ex. [before] $ mount | grep sdc2 /dev/sdc2 on /test12 type btrfs (rw,space_cache,compress=lzo) $ cat /proc/mounts | grep sdc2 /dev/sdc2 /test12 btrfs rw,relatime,compress 0 0 [after] $ mount | grep sdc2 /dev/sdc2 on /test12 type btrfs (rw,space_cache,compress=lzo) $ cat /proc/mounts | grep sdc2 /dev/sdc2 /test12 btrfs rw,relatime,compress=lzo,space_cache 0 0 Signed-off-by:
Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Tsutomu Itoh authored
While compiling Btrfs, I got following messages: CC [M] fs/btrfs/file.o fs/btrfs/file.c: In function '__btrfs_buffered_write': fs/btrfs/file.c:909: warning: 'ret' may be used uninitialized in this function CC [M] fs/btrfs/tree-defrag.o This patch fixes compiler warning. Signed-off-by:
Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
- 28 Mar, 2011 22 commits
-
-
Chris Mason authored
Recent changes for discard support didn't compile, this fixes them not to try and % 64 bit numbers. Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Miao Xie authored
Using the GFP_HIGHUSER_MOVABLE flag to allocate the metadata's page may cause deadlock. Task1 open() ... btrfs_search_slot() ... btrfs_cow_block() ... alloc_page() wait for reclaiming shrink_slab() ... shrink_icache_memory() ... btrfs_evict_inode() ... btrfs_search_slot() If the path is locked by task1, the deadlock happens. So the btree's page cache is different with the file's page cache, it can not allocate pages by GFP_HIGHUSER_MOVABLE flag, we must clear __GFP_FS flag in GFP_HIGHUSER_MOVABLE flag. Reported-by:
Itaru Kitayama <kitayama@cl.bb4u.ne.jp> Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Al Viro authored
old_inode is not locked; it's not safe to play with its link count. Instead of bumping it and calling btrfs_unlink_inode(), add a variant of the latter that does not do btrfs_drop_nlink()/ btrfs_update_inode(), call it instead of btrfs_inc_nlink()/ btrfs_unlink_inode() and do btrfs_update_inode() ourselves. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Tsutomu Itoh authored
Adding the check on the return value of btrfs_alloc_path() to several places. And, some of callers are modified by this change. Signed-off-by:
Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
liubo authored
btrfs will remove unused block groups after balance. When a empty filesystem is balanced, the block group with tag "DATA" may be dropped, and after umount and mount again, it will not find "DATA" space_info and lead to OOPS. So we initial the necessary space_infos(DATA, SYSTEM, METADATA) to avoid OOPS. Reported-by:
Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
liubo authored
After Josef's patch(commit 3c14874a), btrfs will exclude super bytes when reading block groups(by marking a extent state UPTODATE). However, these bytes do not get freed while balance remove unused block groups, and we won't process those removed ones any more, when we do umount and unload the btrfs module, btrfs hits a memory leak. This patch add the missing free operation. Reproduce steps: $ mkfs.btrfs disk $ mount disk /mnt/btrfs -o loop $ btrfs filesystem balance /mnt/btrfs $ umount /mnt/btrfs $ rmmod btrfs Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
liubo authored
setflags ioctl should return error when any checks fail. Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Yoshinori Sano authored
To make Btrfs code more robust, several return value checks where memory allocation can fail are introduced. I use BUG_ON where I don't know how to handle the error properly, which increases the number of using the notorious BUG_ON, though. Signed-off-by:
Yoshinori Sano <yoshinori.sano@gmail.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
liubo authored
When we recover from crash via write-ahead log tree and process the inode refs, for each btrfs_inode_ref item, we will 1) check if we already have a perfect match in fs/file tree, if we have, then we're done. 2) search the corresponding back reference in fs/file tree, and check all the names in this back reference to see if they are also in the log to avoid conflict corners. 3) recover the logged inode refs to fs/file tree. In current btrfs, however, - for 2)'s check, once is enough, since the checked back reference will remain unchanged after processing all the inode refs belonged to the key. - it has no need to do another 1) between 2) and 3). I've made a small test to show how it improves, $dd if=/dev/zero of=foobar bs=4K count=1 $sync $make 100 hard links continuously, like ln foobar link_i $fsync foobar $echo b > /proc/sysrq-trigger after reboot $time mount DEV PATH without patch: real 0m0.285s user 0m0.001s sys 0m0.009s with patch: real 0m0.123s user 0m0.000s sys 0m0.010s Changelog v1->v2: - fix double free - pointed by David Sterba Changelog v2->v3: - adjust free order Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Li Dongyang authored
We take an free extent out from allocator, trim it, then put it back, but before we trim the block group, we should make sure the block group is cached, so plus a little change to make cache_block_group() run without a transaction. Signed-off-by:
Li Dongyang <lidongyang@novell.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Li Dongyang authored
Callers of btrfs_discard_extent() should check if we are mounted with -o discard, as we want to make fitrim to work even the fs is not mounted with -o discard. Also we should use REQ_DISCARD to map the free extent to get a full mapping, last we only return errors if 1. the error is not a EOPNOTSUPP 2. no device supports discard Signed-off-by:
Li Dongyang <lidongyang@novell.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Li Dongyang authored
btrfs_map_block() will only return a single stripe length, but we want the full extent be mapped to each disk when we are trimming the extent, so we add length to btrfs_bio_stripe and fill it if we are mapping for REQ_DISCARD. Signed-off-by:
Li Dongyang <lidongyang@novell.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Li Dongyang authored
Make the function public as we should update the reserved extents calculations after taking out an extent for trimming. Signed-off-by:
Li Dongyang <lidongyang@novell.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Mark Fasheh authored
btrfs_link returns EPERM if a cross-subvolume link is attempted. However, in this case I believe EXDEV to be the more appropriate value. >From the link(2) man page: EXDEV oldpath and newpath are not on the same mounted file system. (Linux permits a file system to be mounted at multiple points, but link() does not work across different mount points, even if the same file system is mounted on both.) This matters because an application may have different behaviors based on return codes. Signed-off-by:
Mark Fasheh <mfasheh@suse.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Liu Bo authored
Data compression and data cow are controlled across the entire FS by mount options right now. ioctls are needed to set this on a per file or per directory basis. This has been proposed previously, but VFS developers wanted us to use generic ioctls rather than btrfs-specific ones. According to Chris's comment, there should be just one true compression method(probably LZO) stored in the super. However, before this, we would wait for that one method is stable enough to be adopted into the super. So I list it as a long term goal, and just store it in ram today. After applying this patch, we can use the generic "FS_IOC_SETFLAGS" ioctl to control file and directory's datacow and compression attribute. NOTE: - The compression type is selected by such rules: If we mount btrfs with compress options, ie, zlib/lzo, the type is it. Otherwise, we'll use the default compress type (zlib today). v1->v2: - rebase to the latest btrfs. v2->v3: - fix a problem, i.e. when a file is set NOCOW via mount option, then this NOCOW will be screwed by inheritance from parent directory. Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
liubo authored
For datacow control, the corresponding inode flags are needed. This is for btrfs use. v1->v2: Change FS_COW_FL to another bit due to conflict with the upstream e2fsprogs Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Miao Xie authored
In the filesystem context, we must allocate memory by GFP_NOFS, or we may start another filesystem operation and make kswap thread hang up. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Tsutomu Itoh authored
This patch is checking return value of read_tree_block(), and if it is NULL, error processing. Signed-off-by:
Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
David Sterba authored
On Fri, Mar 18, 2011 at 11:56:53AM -0400, Chris Mason wrote: > Thanks for fielding this one. Does put_unaligned_le32 optimize away on > platforms with efficient access? It would be great if we didn't need > the #ifdef. (quicktest: assembly output is same for put_unaligned_le32 and direct assignment on my x86_64) I was originally following examples in Documentation/unaligned-memory-access.txt. From other code it seems to me that the define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is intended for larger portions of code. Macros/wrappers for {put,get}_unaligned* are chosen via arch/<arch>/include/asm/unaligned.h accordingly, therefore it's safe to use put_unaligned_le32 without the ifdef. dave Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Tsutomu Itoh authored
This patch changes some BUG_ON() to the error return. (but, most callers still use BUG_ON()) Signed-off-by:
Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
liubo authored
Tracepoints can provide insight into why btrfs hits bugs and be greatly helpful for debugging, e.g dd-7822 [000] 2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0 dd-7822 [000] 2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0 btrfs-transacti-7804 [001] 2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0) btrfs-transacti-7804 [001] 2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0) btrfs-transacti-7804 [001] 2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8 flush-btrfs-2-7821 [001] 2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA flush-btrfs-2-7821 [001] 2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0) flush-btrfs-2-7821 [001] 2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0) flush-btrfs-2-7821 [000] 2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0) Here is what I have added: 1) ordere_extent: btrfs_ordered_extent_add btrfs_ordered_extent_remove btrfs_ordered_extent_start btrfs_ordered_extent_put These provide critical information to understand how ordered_extents are updated. 2) extent_map: btrfs_get_extent extent_map is used in both read and write cases, and it is useful for tracking how btrfs specific IO is running. 3) writepage: __extent_writepage btrfs_writepage_end_io_hook Pages are cirtical resourses and produce a lot of corner cases during writeback, so it is valuable to know how page is written to disk. 4) inode: btrfs_inode_new btrfs_inode_request btrfs_inode_evict These can show where and when a inode is created, when a inode is evicted. 5) sync: btrfs_sync_file btrfs_sync_fs These show sync arguments. 6) transaction: btrfs_transaction_commit In transaction based filesystem, it will be useful to know the generation and who does commit. 7) back reference and cow: btrfs_delayed_tree_ref btrfs_delayed_data_ref btrfs_delayed_ref_head btrfs_cow_block Btrfs natively supports back references, these tracepoints are helpful on understanding btrfs's COW mechanism. 8) chunk: btrfs_chunk_alloc btrfs_chunk_free Chunk is a link between physical offset and logical offset, and stands for space infomation in btrfs, and these are helpful on tracing space things. 9) reserved_extent: btrfs_reserved_extent_alloc btrfs_reserved_extent_free These can show how btrfs uses its space. Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-