Skip to content

L
linux
Switch branch/tag
  1. 18 Apr, 2023 7 commits
    • Huacai Chen's avatar
      LoongArch: module: set section addresses to 0x0 · 93eb1215
      Huacai Chen authored 
      These got*, plt* and .text.ftrace_trampoline sections specified for
LoongArch have non-zero addressses. Non-zero section addresses in a
relocatable ELF would confuse GDB when it tries to compute the section
offsets and it ends up printing wrong symbol addresses. Therefore, set
them to zero, which mirrors the change in commit 5d8591bc
("arm64 module: set plt* section addresses to 0x0").

Cc: stable@vger.kernel.org
Reviewed-by: default avatarGuo Ren <guoren@kernel.org>
Signed-off-by: default avatarChong Qiao <qiaochong@loongson.cn>
Signed-off-by: default avatarHuacai Chen <chenhuacai@loongson.cn>
      93eb1215
    • Huacai Chen's avatar
      LoongArch: Mark 3 symbol exports as non-GPL · dce5ea1d
      Huacai Chen authored 
      vm_map_base, empty_zero_page and invalid_pmd_table could be accessed
widely by some out-of-tree non-GPL but important file systems or drivers
(e.g. OpenZFS). Let's use EXPORT_SYMBOL() instead of EXPORT_SYMBOL_GPL()
to export them, so as to avoid build errors.

1, Details about vm_map_base:

This is a LoongArch-specific symbol and may be referenced through macros
PCI_IOBASE, VMALLOC_START and VMALLOC_END.

2, Details about empty_zero_page:

As it stands today, only 3 architectures export empty_zero_page as a GPL
symbol: IA64, LoongArch and MIPS. LoongArch gets the GPL export by
inheriting from MIPS, and the MIPS export was first introduced in commit
497d2adc ("[MIPS] Export empty_zero_page for sake of the ext4
module."). The IA64 export was similar: commit a7d57ecf ("[IA64]
Export three symbols for module use") did so for kvm.

In both IA64 and MIPS, the export of empty_zero_page was done for
satisfying some in-kernel component built as module (kvm and ext4
respectively), and given its reasonably low-level nature, GPL is a
reasonable choice. But looking at the bigger picture it is evident most
other architectures do not regard it as GPL, so in effect the symbol
probably should not be treated as such, in favor of consistency.

3, Details about invalid_pmd_table:

Keep consistency with invalid_pte_table and make it be possible by some
modules.

Cc: stable@vger.kernel.org
Reviewed-by: default avatarWANG Xuerui <git@xen0n.name>
Signed-off-by: default avatarHuacai Chen <chenhuacai@loongson.cn>
      dce5ea1d
    • Huacai Chen's avatar
      LoongArch: Enable PG when wakeup from suspend · 1c1378a4
      Huacai Chen authored 
      Some firmwares don't enable PG when wakeup from suspend, so do it in
kernel. This can improve code compatibility for boot kernel.
Signed-off-by: default avatarBaoqi Zhang <zhangbaoqi@loongson.cn>
Signed-off-by: default avatarHuacai Chen <chenhuacai@loongson.cn>
      1c1378a4
    • Qing Zhang's avatar
      LoongArch: Fix _CONST64_(x) as unsigned · 6637775c
      Qing Zhang authored 
      Addresses should all be of unsigned type to avoid unnecessary conversions.
Signed-off-by: default avatarQing Zhang <zhangqing@loongson.cn>
Signed-off-by: default avatarHuacai Chen <chenhuacai@loongson.cn>
      6637775c
    • Huacai Chen's avatar
      LoongArch: Fix build error if CONFIG_SUSPEND is not set · 1cf62488
      Huacai Chen authored 
      We can see the following build error on LoongArch if CONFIG_SUSPEND is
not set:

  ld: drivers/acpi/sleep.o: in function 'acpi_pm_prepare':
  sleep.c:(.text+0x2b8): undefined reference to 'loongarch_wakeup_start'

Here is the call trace:

  acpi_pm_prepare()
    __acpi_pm_prepare()
      acpi_sleep_prepare()
        acpi_get_wakeup_address()
          loongarch_wakeup_start()

Root cause: loongarch_wakeup_start() is defined in arch/loongarch/power/
suspend_asm.S which is only built under CONFIG_SUSPEND. In order to fix
the build error, just let acpi_get_wakeup_address() return 0 if CONFIG_
SUSPEND is not set.

Fixes: 366bb35a ("LoongArch: Add suspend (ACPI S3) support")
Reviewed-by: default avatarWANG Xuerui <git@xen0n.name>
Reported-by: default avatarRandy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/all/11215033-fa3c-ecb1-2fc0-e9aeba47be9b@infradead.org/Signed-off-by: default avatarTiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: default avatarHuacai Chen <chenhuacai@loongson.cn>
      1cf62488
    • Huacai Chen's avatar
      LoongArch: Fix probing of the CRC32 feature · df830336
      Huacai Chen authored 
      Not all LoongArch processors support CRC32 instructions. This feature
is indicated by CPUCFG1.CRC32 (Bit25) but it is wrongly defined in the
previous versions of the ISA manual (and so does in loongarch.h). The
CRC32 feature is set unconditionally now, so fix it.

BTW, expose the CRC32 feature in /proc/cpuinfo.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarHuacai Chen <chenhuacai@loongson.cn>
      df830336
    • Huacai Chen's avatar
      LoongArch: Make WriteCombine configurable for ioremap() · 16c52e50
      Huacai Chen authored 
      LoongArch maintains cache coherency in hardware, but when paired with
LS7A chipsets the WUC attribute (Weak-ordered UnCached, which is similar
to WriteCombine) is out of the scope of cache coherency machanism for
PCIe devices (this is a PCIe protocol violation, which may be fixed in
newer chipsets).

This means WUC can only used for write-only memory regions now, so this
option is disabled by default, making WUC silently fallback to SUC for
ioremap(). You can enable this option if the kernel is ensured to run on
hardware without this bug.

Kernel parameter writecombine=on/off can be used to override the Kconfig
option.

Cc: stable@vger.kernel.org
Suggested-by: default avatarWANG Xuerui <kernel@xen0n.name>
Reviewed-by: default avatarWANG Xuerui <kernel@xen0n.name>
Signed-off-by: default avatarHuacai Chen <chenhuacai@loongson.cn>
      16c52e50
  3. 16 Apr, 2023 12 commits
  5. 15 Apr, 2023 6 commits
  7. 14 Apr, 2023 14 commits
  9. 13 Apr, 2023 1 commit
    • Linus Torvalds's avatar
      Merge tag 'cgroup-for-6.3-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup · 44149752
      Linus Torvalds authored 
      Pull cgroup fixes from Tejun Heo:
 "This is a relatively big pull request this late in the cycle but the
  major contributor is the cpuset bug which is rather significant:

   - Fix several cpuset bugs including one where it wasn't applying the
     target cgroup when tasks are created with CLONE_INTO_CGROUP

  With a few smaller fixes:

   - Fix inversed locking order in cgroup1 freezer implementation

   - Fix garbage cpu.stat::core_sched.forceidle_usec reporting in the
     root cgroup"

* tag 'cgroup-for-6.3-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup/cpuset: Make cpuset_attach_task() skip subpartitions CPUs for top_cpuset
  cgroup/cpuset: Add cpuset_can_fork() and cpuset_cancel_fork() methods
  cgroup/cpuset: Make cpuset_fork() handle CLONE_INTO_CGROUP properly
  cgroup/cpuset: Wake up cpuset_attach_wq tasks in cpuset_cancel_attach()
  cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex
  cgroup/cpuset: Fix partition root's cpuset.cpus update bug
  cgroup: fix display of forceidle time at root
      44149752
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7