- 01 Oct, 2019 7 commits
-
-
Anilkumar Kolli authored
The IRAM start address in coredump was wrong for QCA9984, QCA4019, QCA9888 and QCA99x0. Tested on: QCA9984, QCA4019 FW version: 10.4-3.9.0.2-00044 Signed-off-by:
Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Erik Stromdahl authored
Since ath10k_mac_tx_push_txq() can be called from process context, we must explicitly disable softirqs before the call into mac80211. By calling ieee80211_tx_dequeue_ni() instead of ieee80211_tx_dequeue() we make sure softirqs are always disabled even in the case when ath10k_mac_tx_push_txq() is called from process context. Calling ieee80211_tx_dequeue_ni() with softirq's already disabled (e.g., from softirq context) should be safe as the local_bh_disable() and local_bh_enable() functions (called from ieee80211_tx_dequeue_ni) are fully reentrant. Signed-off-by:
Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by:
-
Tomislav Požega authored
Software version within WMI event ready message was displayed in a not very useful decimal format. Change this info to be shown in a hexadecimal format instead. Signed-off-by:
Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by:
-
Tomislav Požega authored
Add vht_supp_mcs argument to service ready structure and print supported MCS rates in WMI service ready debug message. Signed-off-by:
-
Tomislav Požega authored
Displays lowest/highest supported channels for both 2ghz and 5ghz bands as they're fetched within WMI service ready event. These are shown in a frequency format. Signed-off-by:
-
Tomislav Požega authored
Add lowest/highest 2ghz channel arguments for use within WMI service ready structure. Signed-off-by:
-
YueHaibing authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
- 23 Sep, 2019 7 commits
-
-
Navid Emamdoost authored
In ath10k_usb_hif_tx_sg the allocated urb should be released if usb_submit_urb fails. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
-
Wen Gong authored
Recently, it has the basic feature of sdio tested success, so remove it. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00017-QCARMSWP-1. Signed-off-by:
Wen Gong <wgong@codeaurora.org> Signed-off-by:
-
Chuhong Yuan authored
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
-
Colin Ian King authored
There are a bunch of spelling mistakes in two ath drivers, fix these. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Kangjie Lu authored
ath10k_bmi_write32 and ath10k_bmi_read32 can fail. The fix checks their statuses to avoid potential undefined behaviors. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
Surabhi Vishnoi authored
With the current implementation of wmi init command, there is no provision for the host driver to provide mem chunks addresses with more than 32-bit, to the firmware. WCN3990 is a 35-bit target and can accept mem chunks addresses which are above 32-bit. If firmware supports address range more than 32 bit, it advertises the support by setting the WMI_SERVICE_EXTEND_ADDRESS service. Based on this service fill the upper bits of paddr while providing the mem chunks in the wmi init command. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Signed-off-by:
Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by:
-
Rakesh Pillai authored
The peer param id for PEER_PARAM_USE_FIXED_PWR is different for tlv and non-tlv firmware. This causes incorrect peer param to be set by the driver to the firmware(tlv/non-tlv). Create seperate peer param map for tlv and non-tlv firmware and attach the peer param id based on the firmware type during the init. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Signed-off-by:
Rakesh Pillai <pillair@codeaurora.org> Signed-off-by:
-
- 21 Sep, 2019 3 commits
-
-
Govind Singh authored
MSA memory region caries the hw descriptors information. Dump MSA region in core dump as this is very helpful in debugging hw issues. Testing: Tested on WCN3990 HW Tested FW: WLAN.HL.3.1-00959-QCAHLSWMTPLZ-1 Signed-off-by:
Govind Singh <govinds@codeaurora.org> Signed-off-by:
-
Govind Singh authored
PMIC XO is the clock source for wifi rf clock in integrated wifi chipset ex: WCN3990. Due to board layout errors XO frequency drifts can cause wifi rf clock inaccuracy. XO calibration test tree in Factory Test Mode is used to find the best frequency offset(for example +/-2KHz )by programming XO trim register. This ensure system clock stays within required 20 ppm WLAN rf clock. Retrieve the xo trim offset via system firmware (e.g., device tree), especially in the case where the device doesn't have a useful EEPROM on which to store the calibrated XO offset (e.g., for integrated Wifi). Calibrated XO offset is sent to fw, which compensate the clock drift by programing the XO trim register. Signed-off-by:
-
Govind Singh authored
Add dt binding to get xo calibration data support for wifi rf clock. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 17 Sep, 2019 12 commits
-
-
Colin Ian King authored
There is a spelling mistake in a ath10k_warn warning message. Fix it. Signed-off-by:
-
Miaoqing Pan authored
Bad latency is found on QCA988x, the issue was introduced by commit 4504f0e5 ("ath10k: sdio: workaround firmware UART pin configuration bug"). If uart_pin_workaround is false, this change will set uart pin even if uart_print is false. Tested HW: QCA9880 Tested FW: 10.2.4-1.0-00037 Fixes: 4504f0e5 ("ath10k: sdio: workaround firmware UART pin configuration bug") Signed-off-by:
Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by:
-
Wenwen Wang authored
If 'sta->tdls' is false, no cleanup is executed, leading to memory/resource leaks, e.g., 'arsta->tx_stats'. To fix this issue, perform cleanup before go to the 'exit' label. Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
-
Govind Singh authored
driver sends QMI_WLFW_MSA_INFO_REQ_V01 QMI request to firmware and in response expects range of addresses and size to be mapped. Add condition to check whether addresses in response falls under valid range otherwise return failure. Testing: Tested on WCN3990 HW Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 Signed-off-by:
-
Tomislav Požega authored
Use ath10k_pci_soc_read32 / ath10k_pci_soc_write32 functions for the rest of warm_reset functions. Until now these have been used only for ath10k_pci_warm_reset_si0, but since they already exist it makes sense to simplify code a bit. Runtime tested with QCA9862. Signed-off-by:
-
Vasyl Gomonovych authored
fix coccinelle warning, use ARRAY_SIZE Signed-off-by:
Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by:
-
Sven Eckelmann authored
ath10k_bss_info_changed() handles various events from the upper layers. It parses the changed bitfield and then configures the driver/firmware accordingly. Each detected event is handled in a separate scope which is independent of each other - but in the same function. The commit f279294e ("ath10k: add support for configuring management packet rate") changed this behavior by returning from this function prematurely when some precondition was not fulfilled. All new event handlers added after the BSS_CHANGED_BASIC_RATES event handler would then also be skipped. Signed-off-by:
Sven Eckelmann <seckelmann@datto.com> Signed-off-by:
-
Bjorn Andersson authored
No frequency is currently specified for the single clock defined in the snoc driver, so the clock wrappers reimplements the standard bulk API provided by the clock framework. Change to this. The single clock defined is marked as optional so this version of the get API is used, but might need to be reconsidered in the future. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Bjorn Andersson authored
The regulator_get_optional() exists for cases where the driver needs do behave differently depending on some regulator supply being present or not, as we don't use this we can use the standard regulator_get() and rely on its handling of unspecified regulators. While the driver currently doesn't specify any loads the regulator framework was updated last year to only account for load of enabled regulators, so should the need appear it's better to apply load numbers during initialization that dynamically. With this the regulator wrappers have been reduced the become identical to the standard bulk API provided by the regulator framework, so use these instead of rolling our own. Signed-off-by:
-
Bjorn Andersson authored
The regulator operations is trying to set a voltage to a fixed value, by giving some wiggle room. But some board designs specifies regulator voltages outside this limited range. One such example is the Lenovo Yoga C630, with vdd-3.3-ch0 in particular specified at 3.1V. But consumers with fixed voltage requirements should just rely on the board configuration to provide the power at the required level, so this code should be removed. Signed-off-by:
-
Bjorn Andersson authored
The introduction of 768ec4c0 ("ath10k: update HOST capability QMI message") served the purpose of supporting the new and extended HOST capability QMI message. But while the new message adds a slew of optional members it changes the data type of the "daemon_support" member, which means that older versions of the firmware will fail to decode the incoming request message. There is no way to detect this breakage from Linux and there's no way to recover from sending the wrong message (i.e. we can't just try one format and then fallback to the other), so a quirk is introduced in DeviceTree to indicate to the driver that the firmware requires the 8bit version of this message. Cc: stable@vger.kernel.org Fixes: 768ec4c0 ("ath10k: update HOST capability qmi message") Signed-off-by:
-
Hauke Mehrtens authored
It looks like the FW on QCA9984 already reports the tx airtimes before the station is added to the peer entry. The peer entry is created in ath10k_peer_map_event() just with the vdev_id and the ethaddr, but not with a station entry, this is added later in ath10k_peer_create() in callbacks from mac80211. When there is no sta added to the peer entry, this function fails because it calls ieee80211_sta_register_airtime() with NULL. This was reported in OpenWrt some time ago: https://bugs.openwrt.org/index.php?do=details&task_id=2414 This commit should fix this crash: [ 75.991714] Unable to handle kernel paging request at virtual address fffff9e8 [ 75.991756] pgd = c0204000 [ 75.997955] [fffff9e8] *pgd=5fdfd861, *pte=00000000, *ppte=00000000 [ 76.000537] Internal error: Oops: 37 [#1] SMP ARM [ 76.006686] Modules linked in: pppoe ppp_async ath10k_pci ath10k_core ath pptp pppox ppp_mppe ppp_generic mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY usbserial slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables crc_ccitt compat chaoskey fuse sch_cake sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 [ 76.059974] cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6t_NPT ip6t_MASQUERADE nf_nat_masquerade_ipv6 nf_nat nf_conntrack nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 msdos ip_gre gre ifb sit tunnel4 ip_tunnel tun vfat fat hfsplus cifs nls_utf8 nls_iso8859_15 nls_iso8859_1 nls_cp850 nls_cp437 nls_cp1250 sha1_generic md5 md4 [ 76.130634] usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_of_simple ohci_platform ohci_hcd phy_qcom_dwc3 ahci ehci_platform sd_mod ahci_platform libahci_platform libahci libata scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 exfat crc32c_generic [ 76.154772] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.132 #0 [ 76.177001] Hardware name: Generic DT based system [ 76.182990] task: c0b06d80 task.stack: c0b00000 [ 76.187832] PC is at ieee80211_sta_register_airtime+0x24/0x148 [mac80211] [ 76.192211] LR is at ath10k_htt_t2h_msg_handler+0x678/0x10f4 [ath10k_core] [ 76.199052] pc : [<bf75bfac>] lr : [<bf83e8b0>] psr: a0000113 [ 76.205820] sp : c0b01d54 ip : 00000002 fp : bf869c0c [ 76.211981] r10: 0000003c r9 : dbdca138 r8 : 00060002 [ 76.217192] r7 : 00000000 r6 : dabe1150 r5 : 00000000 r4 : dbdc95c0 [ 76.222401] r3 : 00000000 r2 : 00060002 r1 : 00000000 r0 : 00000000 [ 76.229003] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 76.235509] Control: 10c5787d Table: 5c94006a DAC: 00000051 [ 76.242716] Process swapper/0 (pid: 0, stack limit = 0xc0b00210) [ 76.248446] Stack: (0xc0b01d54 to 0xc0b02000) [ 76.254532] 1d40: dbdc95c0 00000000 dabe1150 [ 76.258808] 1d60: 00000001 dabe1150 dbdca138 0000003c bf869c0c bf83e8b0 00000002 c0314b10 [ 76.266969] 1d80: dbdc9c70 00000001 00000001 dabe114c 00010000 00000000 dbdcd724 bf88f3d8 [ 76.275126] 1da0: c0310d28 db393c00 dbdc95c0 00000000 c0b01dd0 c07fb4c4 dbdcd724 00000001 [ 76.283286] 1dc0: 00000022 bf88b09c db393c00 00000022 c0b01dd0 c0b01dd0 00000000 dbdcc5c0 [ 76.291445] 1de0: bf88f04c dbdcd654 dbdcd71c dbdc95c0 00000014 dbdcd724 dbdcc5c0 00000005 [ 76.299605] 1e00: 0004b400 bf85c360 00000000 bf87101c c0b01e24 00000006 00000000 dbdc95c0 [ 76.307764] 1e20: 00000001 00000040 0000012c c0b01e80 1cf51000 bf85c448 dbdcd440 dbdc95c0 [ 76.315925] 1e40: dbdca440 ffffa880 00000040 bf88cb68 dbdcd440 00000001 00000040 ffffa880 [ 76.324084] 1e60: c0b02d00 c06d72e0 dd990080 c0a3f080 c0b255dc c0b047e4 c090afac c090e80c [ 76.332244] 1e80: c0b01e80 c0b01e80 c0b01e88 c0b01e88 dd4cc200 00000000 00000003 c0b0208c [ 76.340405] 1ea0: c0b02080 40000003 ffffe000 00000100 c0b02080 c03015c8 00000000 00000001 [ 76.348564] 1ec0: dd408000 c0a38210 c0b2c7c0 0000000a ffffa880 c0b02d00 c07fb764 00200102 [ 76.356723] 1ee0: dd4cc268 c0a3e414 00000000 00000000 00000001 dd408000 de803000 00000000 [ 76.364883] 1f00: 00000000 c03247cc c0a3e414 c0368f1c c0b03f60 c0b153cc de80200c de802000 [ 76.373042] 1f20: c0b01f48 c0301488 c0308630 60000013 ffffffff c0b01f7c 00000000 c0b00000 [ 76.381204] 1f40: 00000000 c030c08c 00000001 00000000 00000000 c0315180 ffffe000 c0b03cc0 [ 76.389363] 1f60: c0b03c70 00000000 00000000 c0a2da28 00000000 00000000 c0b01f90 c0b01f98 [ 76.397522] 1f80: c030862c c0308630 60000013 ffffffff 00000051 00000000 ffffe000 c035dd18 [ 76.405681] 1fa0: 000000bf c0b03c40 00000000 c0b2c000 dddfce80 c035e060 c0b2c040 c0a00cf4 [ 76.413842] 1fc0: ffffffff ffffffff 00000000 c0a0067c c0a2da28 00000000 00000000 c0b2c1d4 [ 76.422001] 1fe0: c0b03c5c c0a2da24 c0b07ee0 4220406a 512f04d0 4220807c 00000000 00000000 [ 76.430335] [<bf75bfac>] (ieee80211_sta_register_airtime [mac80211]) from [<00000002>] (0x2) [ 76.438314] Code: e1cd81f0 e1a08002 e1cda1f8 e58de020 (e5102618) [ 76.446965] ---[ end trace 227a38ade964d642 ]--- Fixes: bb31b7cb ("ath10k: report tx airtime provided by fw") Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
- 15 Sep, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller authored
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by:David S. Miller <davem@davemloft.net>
-
- 14 Sep, 2019 10 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "The main change here is a revert of reverts. We recently simplified some code that was thought unnecessary; however, since then KVM has grown quite a few cond_resched()s and for that reason the simplified code is prone to livelocks---one CPUs tries to empty a list of guest page tables while the others keep adding to them. This adds back the generation-based zapping of guest page tables, which was not unnecessary after all. On top of this, there is a fix for a kernel memory leak and a couple of s390 fixlets as well" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot KVM: x86: work around leak of uninitialized stack contents KVM: nVMX: handle page fault in vmread KVM: s390: Do not leak kernel stack data in the KVM_S390_INTERRUPT ioctl KVM: s390: kvm_s390_vm_start_migration: check dirty_bitmap before using it as target for memset()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio fix from Michael Tsirkin: "A last minute revert The 32-bit build got broken by the latest defence in depth patch. Revert and we'll try again in the next cycle" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: Revert "vhost: block speculation of translated descriptors"
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Paul Walmsley: "Last week, Palmer and I learned that there was an error in the RISC-V kernel image header format that could make it less compatible with the ARM64 kernel image header format. I had missed this error during my original reviews of the patch. The kernel image header format is an interface that impacts bootloaders, QEMU, and other user tools. Those packages must be updated to align with whatever is merged in the kernel. We would like to avoid proliferating these image formats by keeping the RISC-V header as close as possible to the existing ARM64 header. Since the arch/riscv patch that adds support for the image header was merged with our v5.3-rc1 pull request as commit 0f327f2a ("RISC-V: Add an Image header that boot loader can parse."), we think it wise to try to fix this error before v5.3 is released. The fix itself should be backwards-compatible with any project that has already merged support for premature versions of this interface. It primarily involves ensuring that the RISC-V image header has something useful in the same field as the ARM64 image header" * tag 'riscv/for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: modify the Image header to improve compatibility with the ARM64 header
-
Michael S. Tsirkin authored
This reverts commit a89db445. I was hasty to include this patch, and it breaks the build on 32 bit. Defence in depth is good but let's do it properly. Cc: stable@vger.kernel.org Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't corrupt xfrm_interface parms before validation, from Nicolas Dichtel. 2) Revert use of usb-wakeup in btusb, from Mario Limonciello. 3) Block ipv6 packets in bridge netfilter if ipv6 is disabled, from Leonardo Bras. 4) IPS_OFFLOAD not honored in ctnetlink, from Pablo Neira Ayuso. 5) Missing ULP check in sock_map, from John Fastabend. 6) Fix receive statistic handling in forcedeth, from Zhu Yanjun. 7) Fix length of SKB allocated in 6pack driver, from Christophe JAILLET. 8) ip6_route_info_create() returns an error pointer, not NULL. From Maciej Żenczykowski. 9) Only add RDS sock to the hashes after rs_transport is set, from Ka-Cheong Poon. 10) Don't double clean TX descriptors in ixgbe, from Ilya Maximets. 11) Presence of transmit IPSEC offload in an SKB is not tested for correctly in ixgbe and ixgbevf. From Steffen Klassert and Jeff Kirsher. 12) Need rcu_barrier() when register_netdevice() takes one of the notifier based failure paths, from Subash Abhinov Kasiviswanathan. 13) Fix leak in sctp_do_bind(), from Mao Wenan. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) cdc_ether: fix rndis support for Mediatek based smartphones sctp: destroy bucket if failed to bind addr sctp: remove redundant assignment when call sctp_get_port_local sctp: change return type of sctp_get_port_local ixgbevf: Fix secpath usage for IPsec Tx offload sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()' ixgbe: Fix secpath usage for IPsec TX offload. net: qrtr: fix memort leak in qrtr_tun_write_iter net: Fix null de-reference of device refcount ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()' tun: fix use-after-free when register netdev failed tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR ixgbe: fix double clean of Tx descriptors with xdp ixgbe: Prevent u8 wrapping of ITR value to something less than 10us mlx4: fix spelling mistake "veify" -> "verify" net: hns3: fix spelling mistake "undeflow" -> "underflow" net: lmc: fix spelling mistake "runnin" -> "running" NFC: st95hf: fix spelling mistake "receieve" -> "receive" net/rds: An rds_sock is added too early to the hash table mac80211: Do not send Layer 2 Update frame before authorization ... -
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: - tmio: Fixup runtime PM management during probe and remove - sdhci-pci-o2micro: Fix eMMC initialization for an AMD SoC - bcm2835: Prevent lockups when terminating work * tag 'mmc-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: tmio: Fixup runtime PM management during remove mmc: tmio: Fixup runtime PM management during probe Revert "mmc: tmio: move runtime PM enablement to the driver implementations" Revert "mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller" Revert "mmc: bcm2835: Terminate timeout work synchronously"
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "From the maintainer summit, just some last minute fixes for final: lima: - fix gem_wait ioctl core: - constify modes list i915: - DP MST high color depth regression - GPU hangs on vulkan compute workloads" * tag 'drm-fixes-2019-09-13' of git://anongit.freedesktop.org/drm/drm: drm/lima: fix lima_gem_wait() return value drm/i915: Restore relaxed padding (OCL_OOB_SUPPRES_ENABLE) for skl+ drm/i915: Limit MST to <= 8bpc once again drm/modes: Make the whitelist more const
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2019-09-14' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.4 Last set of patches for 5.4. wil6210 and rtw88 being most active this time, but ath9k also having a new module to load devices without EEPROM. Major changes: wil6210 * add support for Enhanced Directional Multi-Gigabit (EDMG) channels 9-11 * add debugfs file to show PCM ring content * report boottime_ns in scan results ath9k * add a separate loader for AR92XX (and older) pci(e) without eeprom brcmfmac * use the same wiphy after PCIe reset to not confuse the user space rtw88 * enable interrupt migration * enable AMSDU in AMPDU aggregation * report RX power for each antenna * enable to DPK and IQK calibration methods to improve performance ==================== Signed-off-by:
-
Paolo Bonzini authored
Merge tag 'kvm-s390-master-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master KVM: s390: Fixes for 5.3 - prevent a user triggerable oops in the migration code - do not leak kernel stack content
-
Sean Christopherson authored
James Harvey reported a livelock that was introduced by commit d012a06a ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06a) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b69 ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aac ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d3 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b69 ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06a ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by:
James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
