- 25 Feb, 2018 3 commits
-
-
Johannes Berg authored
commit 59b179b4 upstream. syzbot reported a warning from rfkill_alloc(), and after a while I think that the reason is that it was doing fault injection and the dev_set_name() failed, leaving the name NULL, and we didn't check the return value and got to rfkill_alloc() with a NULL name. Since we really don't want a NULL name, we ought to check the return value. Fixes: fb28ad35 ("net: struct device - replace bus_id with dev_name(), dev_set_name()") Reported-by: syzbot+1ddfb3357e1d7bb5b5d3@syzkaller.appspotmail.com Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Abeni authored
commit 607f725f upstream. This also fix a potential race into the existing tunnel code, which could lead to the wrong dst to be permanenty cached: CPU1: CPU2: <xmit on ip6_tunnel> <cache lookup fails> dst = ip6_route_output(...) <tunnel params are changed via nl> dst_cache_reset() // no effect, // the cache is empty dst_cache_set() // the wrong dst // is permanenty stored // into the cache With the new dst implementation the above race is not possible since the first cache lookup after dst_cache_reset will fail due to the timestamp check Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Manoj Boopathi Raj <manojboopathi@google.com> Signed-off-by:
-
Paolo Abeni authored
commit 911362c7 upstream. This patch add a generic, lockless dst cache implementation. The need for lock is avoided updating the dst cache fields only in per cpu scope, and requiring that the cache manipulation functions are invoked with the local bh disabled. The refresh_ts and reset_ts fields are used to ensure the cache consistency in case of cuncurrent cache update (dst_cache_set*) and reset operation (dst_cache_reset). Consider the following scenario: CPU1: CPU2: <cache lookup with emtpy cache: it fails> <get dst via uncached route lookup> <related configuration changes> dst_cache_reset() dst_cache_set() The dst entry set passed to dst_cache_set() should not be used for later dst cache lookup, because it's obtained using old configuration values. Since the refresh_ts is updated only on dst_cache lookup, the cached value in the above scenario will be discarded on the next lookup. Signed-off-by:
-
- 22 Feb, 2018 34 commits
-
-
Greg Kroah-Hartman authored
-
Arnd Bergmann authored
commit 16c3ada8 upstream. With CONFIG_KASAN, we get an overly long stack frame due to inlining the register access functions: drivers/media/tuners/r820t.c: In function 'generic_set_freq.isra.7': drivers/media/tuners/r820t.c:1334:1: error: the frame size of 2880 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] This is caused by a gcc bug that has now been fixed in gcc-8. To work around the problem, we can pass the register data through a local variable that older gcc versions can optimize out as well. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Arnd Bergmann authored
commit 5c103719 upstream. The ohci-hcd node has an interrupt number but no interrupt-parent, leading to a warning with current dtc versions: arch/arm/boot/dts/s5pv210-aquila.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 arch/arm/boot/dts/s5pv210-goni.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 arch/arm/boot/dts/s5pv210-smdkc110.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 arch/arm/boot/dts/s5pv210-smdkv210.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 arch/arm/boot/dts/s5pv210-torbreck.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 As seen from the related exynos dts files, the ohci and ehci controllers always share one interrupt number, and the number is the same here as well, so setting the same interrupt-parent is the reasonable solution here. Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 33436478 upstream. Without this tag, we get a build warning: WARNING: modpost: missing MODULE_LICENSE() in arch/arm/mach-pxa/tosa-bt.o For completeness, I'm also adding author and description fields. Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Linus Torvalds authored
commit c0eb027e upstream. Normal pathname lookup doesn't allow empty pathnames, but using AT_EMPTY_PATH (with name_to_handle_at() or fstatat(), for example) you can trigger an empty pathname lookup. And not only is the RCU lookup in that case entirely unnecessary (because we'll obviously immediately finalize the end result), it is actively wrong. Why? An empth path is a special case that will return the original 'dirfd' dentry - and that dentry may not actually be RCU-free'd, resulting in a potential use-after-free if we were to initialize the path lazily under the RCU read lock and depend on complete_walk() finalizing the dentry. Found by syzkaller and KASAN. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Reported-by:
Vegard Nossum <vegard.nossum@gmail.com> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Biggers <ebiggers3@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
I ran into a 4.9 build warning in randconfig testing, starting with the KAISER patches: arch/x86/kernel/ldt.c: In function 'alloc_ldt_struct': arch/x86/include/asm/pgtable_types.h:208:24: error: large integer implicitly truncated to unsigned type [-Werror=overflow] #define __PAGE_KERNEL (__PAGE_KERNEL_EXEC | _PAGE_NX) ^ arch/x86/kernel/ldt.c:81:6: note: in expansion of macro '__PAGE_KERNEL' __PAGE_KERNEL); ^~~~~~~~~~~~~ I originally ran into this last year when the patches were part of linux-next, and tried to work around it by using the proper 'pteval_t' types consistently, but that caused additional problems. This takes a much simpler approach, and makes the argument type of the dummy helper always 64-bit, which is wide enough for any page table layout and won't hurt since this call is just an empty stub anyway. Fixes: 8f0baadf ("kaiser: merged update") Signed-off-by:Kees Cook <keescook@chromium.org> Acked-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
NeilBrown authored
commit 8dd601fa upstream. dec_pending() is given an error status (possibly 0) to be recorded against a bio. It can be called several times on the one 'struct dm_io', and it is careful to only assign a non-zero error to io->status. However when it then assigned io->status to bio->bi_status, it is not careful and could overwrite a genuine error status with 0. This can happen when chained bios are in use. If a bio is chained beneath the bio that this dm_io is handling, the child bio might complete and set bio->bi_status before the dm_io completes. This has been possible since chained bios were introduced in 3.14, and has become a lot easier to trigger with commit 18a25da8 ("dm: ensure bio submission follows a depth-first tree walk") as that commit caused dm to start using chained bios itself. A particular failure mode is that if a bio spans an 'error' target and a working target, the 'error' fragment will complete instantly and set the ->bi_status, and the other fragment will normally complete a little later, and will clear ->bi_status. The fix is simply to only assign io_error to bio->bi_status when io_error is not zero. Reported-and-tested-by:
Milan Broz <gmazyland@gmail.com> Cc: stable@vger.kernel.org (v3.14+) Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 7ac8ff95 upstream. IPv6 doesn't work on the MacchiatoBIN board. It is caused by broken multicast address filter in the mvpp2 driver. The driver loads doesn't load any multicast entries if "allmulti" is not set. This condition should be reversed. The condition !netdev_mc_empty(dev) is useless (because netdev_for_each_mc_addr is nop if the list is empty). This patch also fixes a possible overflow of the multicast list - if mvpp2_prs_mac_da_accept fails, we set the allmulti flag and retry. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
commit d15d662e upstream. ALSA sequencer core initializes the event pool on demand by invoking snd_seq_pool_init() when the first write happens and the pool is empty. Meanwhile user can reset the pool size manually via ioctl concurrently, and this may lead to UAF or out-of-bound accesses since the function tries to vmalloc / vfree the buffer. A simple fix is to just wrap the snd_seq_pool_init() call with the recently introduced client->ioctl_mutex; as the calls for snd_seq_pool_init() from other side are always protected with this mutex, we can avoid the race. Reported-by:
范龙飞 <long7573@126.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Lassi Ylikojola authored
commit 5e35dc03 upstream. Add quirk to ensure a sync endpoint is properly configured. This patch is a fix for same symptoms on Behringer UFX1204 as patch from Albertto Aquirre on Dec 8 2016 for Axe-Fx II. Signed-off-by:
Lassi Ylikojola <lassi.ylikojola@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jan-Marek Glogowski authored
commit fdcc968a upstream. These laptops have a combined jack to attach headsets, the U727 on the left, the U757 on the right, but a headsets microphone doesn't work. Using hdajacksensetest I found that pin 0x19 changed the present state when plugging the headset, in addition to 0x21, but didn't have the correct configuration (shown as "Not connected"). So this sets the configuration to the same values as the headphone pin 0x21 except for the device type microphone, which makes it work correctly. With the patch the configured pins for U727 are Pin 0x12 (Internal Mic, Mobile-In): present = No Pin 0x14 (Internal Speaker): present = No Pin 0x19 (Black Mic, Left side): present = No Pin 0x1d (Internal Aux): present = No Pin 0x21 (Black Headphone, Left side): present = No Signed-off-by:
Jan-Marek Glogowski <glogow@fbihome.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kirill Marinushkin authored
commit 447cae58 upstream. The layout of the UAC2 Control request and response varies depending on the request type. With the current implementation, only the Layout 2 Parameter Block (with the 2-byte sized RANGE attribute) is handled properly. For the Control requests with the 1-byte sized RANGE attribute (Bass Control, Mid Control, Tremble Control), the response is parsed incorrectly. This commit: * fixes the wLength field value in the request * fixes parsing the range values from the response Fixes: 23caaf19 ("ALSA: usb-mixer: Add support for Audio Class v2.0") Signed-off-by:
Kirill Marinushkin <k.marinushkin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hui Wang authored
commit 3f2f7c55 upstream. One of them has the codec of alc256 and the other one has the codec of alc289. Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Liu Bo authored
commit 900c9981 upstream. The highest objectid, which is assigned to new inode, is decided at the time of initializing fs roots. However, in cases where log replay gets processed, the btree which fs root owns might be changed, so we have to search it again for the highest objectid, otherwise creating new inode would end up with -EEXIST. cc: <stable@vger.kernel.org> v4.4-rc6+ Fixes: f32e48e9 ("Btrfs: Initialize btrfs_root->highest_objectid when loading tree root and subvolume roots") Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Liu Bo authored
commit 1846430c upstream. In cases that the whole fs flips into readonly status due to failures in critical sections, then log tree's blocks are still dirty, and this leads to a crash during umount time, the crash is about use-after-free, umount -> close_ctree -> stop workers -> iput(btree_inode) -> iput_final -> write_inode_now -> ... -> queue job on stop'd workers cc: <stable@vger.kernel.org> v3.12+ Fixes: 681ae509 ("Btrfs: cleanup reserved space when freeing tree log on error") Signed-off-by:
-
Liu Bo authored
commit e8916699 upstream. @cur_offset is not set back to what it should be (@cow_start) if btrfs_next_leaf() returns something wrong, and the range [cow_start, cur_offset) remains locked forever. cc: <stable@vger.kernel.org> Signed-off-by:
-
Larry Finger authored
commit c713fb07 upstream. There has been a coding error in rtl8821ae since it was first introduced, namely that an 8-bit register was read using a 16-bit read in _rtl8821ae_dbi_read(). This error was fixed with commit 40b368af ("rtlwifi: Fix alignment issues"); however, this change led to instability in the connection. To restore stability, this change was reverted in commit b8b8b163 ("rtlwifi: rtl8821ae: Fix connection lost problem"). Unfortunately, the unaligned access causes machine checks in ARM architecture, and we were finally forced to find the actual cause of the problem on x86 platforms. Following a suggestion from Pkshih <pkshih@realtek.com>, it was found that increasing the ASPM L1 latency from 0 to 7 fixed the instability. This parameter was varied to see if a smaller value would work; however, it appears that 7 is the safest value. A new symbol is defined for this quantity, thus it can be easily changed if necessary. Fixes: b8b8b163 ("rtlwifi: rtl8821ae: Fix connection lost problem") Cc: Stable <stable@vger.kernel.org> # 4.14+ Fix-suggested-by:
Pkshih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Tested-by: James Cameron <quozl@laptop.org> # x86_64 OLPC NL3 Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Nicolas Pitre authored
commit 724ba8b3 upstream. When this method is set, the caller expects struct console_font fields to be properly initialized when it returns. Leave it unset otherwise nonsensical (leaked kernel stack) values are returned to user space. Signed-off-by:
Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Johan Hovold authored
commit 9cb18db0 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent display node was also prematurely freed. Note that the display and timings node references are never put after a successful dt-initialisation so the nodes would leak on later probe deferrals and on driver unbind. Fixes: b985172b ("video: atmel_lcdfb: add device tree suport") Cc: stable <stable@vger.kernel.org> # 3.13 Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit af27d940 upstream. We get a warning about some slow configurations in randconfig kernels: mm/memory.c:83:2: error: #warning Unfortunate NUMA and NUMA Balancing config, growing page-frame for last_cpupid. [-Werror=cpp] The warning is reasonable by itself, but gets in the way of randconfig build testing, so I'm hiding it whenever CONFIG_COMPILE_TEST is set. The warning was added in 2013 in commit 75980e97 ("mm: fold page->_last_nid into page->flags where possible"). Cc: stable@vger.kernel.org Signed-off-by:
-
Ernesto A. Fernández authored
commit 9f037248 upstream. The grpid option is currently described as being the same as nogrpid. Signed-off-by:
Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
-
Zhouyi Zhou authored
commit 06f29cc8 upstream. In the function __ext4_grp_locked_error(), __save_error_info() is called to save error info in super block block, but does not sync that information to disk to info the subsequence fsck after reboot. This patch writes the error information to disk. After this patch, I think there is no obvious EXT4 error handle branches which leads to "Remounting filesystem read-only" will leave the disk partition miss the subsequence fsck. Signed-off-by:
Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by:
-
Stewart Smith authored
commit 5b8b5806 upstream. According to the OPAL docs: skiboot-5.2.5/doc/opal-api/opal-rtc-read-3.txt skiboot-5.2.5/doc/opal-api/opal-rtc-write-4.txt OPAL_HARDWARE may be returned from OPAL_RTC_READ or OPAL_RTC_WRITE and this indicates either a transient or permanent error. Prior to this patch, Linux was not dealing with OPAL_HARDWARE being a permanent error particularly well, in that you could end up in a busy loop. This was not too hard to trigger on an AMI BMC based OpenPOWER machine doing a continuous "ipmitool mc reset cold" to the BMC, the result of that being that we'd get stuck in an infinite loop in opal_get_rtc_time(). We now retry a few times before returning the error higher up the stack. Fixes: 16b1d26e ("rtc/tpo: Driver to support rtc and wakeup on PowerNV platform") Cc: stable@vger.kernel.org # v3.19+ Signed-off-by:
Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Julia Lawall authored
commit 3a61b527 upstream. Check the variable that was most recently initialized. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x, y, f, g, e, m; statement S1,S2,S3,S4; @@ x = f(...); if (\(<+...x...+>\&e\)) S1 else S2 ( x = g(...); | m = g(...,&x,...); | y = g(...); *if (e) S3 else S4 ) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Gustavo A. R. Silva authored
commit 24dbc600 upstream. Currently, x86_cache_size is of type int, which makes no sense as we will never have a valid cache size equal or less than 0. So instead of initializing this variable to -1, it can perfectly be initialized to 0 and use it as an unsigned variable instead. Suggested-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Addresses-Coverity-ID: 1464429 Link: http://lkml.kernel.org/r/20180213192208.GA26414@embeddedor.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
David Woodhouse authored
KVM/x86: Reduce retpoline performance impact in slot_handle_level_range(), by always inlining iterator helper methods commit 928a4c39 upstream. With retpoline, tight loops of "call this function for every XXX" are very much pessimised by taking a prediction miss *every* time. This one is by far the biggest contributor to the guest launch time with retpoline. By marking the iterator slot_handle_…() functions always_inline, we can ensure that the indirect function call can be optimised away into a direct call and it actually generates slightly smaller code because some of the other conditionals can get optimised away too. Performance is now pretty close to what we see with nospectre_v2 on the command line. Suggested-by:
Filippo Sironi <sironi@amazon.de> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arjan.van.de.ven@intel.com Cc: dave.hansen@intel.com Cc: jmattson@google.com Cc: karahmed@amazon.de Cc: kvm@vger.kernel.org Cc: rkrcmar@redhat.com Link: http://lkml.kernel.org/r/1518305967-31356-4-git-send-email-dwmw@amazon.co.ukSigned-off-by:
-
Takashi Iwai authored
This is the revised backport of the upstream commit b3defb79 We had another backport (e.g. 623e5c8a in 4.4.115), but it applies the new mutex also to the code paths that are invoked via faked kernel-to-kernel ioctls. As reported recently, this leads to a deadlock at suspend (or other scenarios triggering the kernel sequencer client). This patch addresses the issue by taking the mutex only in the code paths invoked by user-space, just like the original fix patch does. Reported-and-tested-by:
Andres Bertens <abertensu@yahoo.com> Signed-off-by:
-
Viresh Kumar authored
commit f8975cb1 upstream. This fixes the following warning by also sending the flags argument for gpio controllers: Property 'cs-gpios', cell 6 is not a phandle reference in /ahb/apb/spi@e0100000 Fixes: 8113ba91 ("ARM: SPEAr: DT: Update device nodes") Cc: stable@vger.kernel.org # v3.8+ Reported-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Viresh Kumar authored
commit cdd10409 upstream. The "dmas" cells for the designware DMA controller need to have only 3 properties apart from the phandle: request line, src master and destination master. But the commit 6e8887f6 updated it incorrectly while moving from platform code to DT. Fix it. Cc: stable@vger.kernel.org # v3.10+ Fixes: 6e8887f6 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT") Reported-by:
-
Viresh Kumar authored
commit 6ffb5b4f upstream. The interrupt-parent of rtc was missing, add it. Fixes: 8113ba91 ("ARM: SPEAr: DT: Update device nodes") Cc: stable@vger.kernel.org # v3.8+ Reported-by:
-
Patrice Chotard authored
commit 7ac1f59c upstream. The GPIO polarity is missing in the hdmi,hpd-gpio property, this fixes the following DT warnings: arch/arm/boot/dts/stih410-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000 arch/arm/boot/dts/stih407-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000 arch/arm/boot/dts/stih410-b2260.dtb: Warning (gpios_property): hdmi,hpd-gpio property size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000 [arnd: marked Cc:stable since this warning shows up with the latest dtc by default, and is more likely to actually cause problems than the other patches from this series] Cc: stable@vger.kernel.org Signed-off-by:
Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
-
Eugene Syromiatnikov authored
commit 6dd0d2d2 upstream. For some reason, the implementation of some 16-bit ID system calls (namely, setuid16/setgid16 and setfsuid16/setfsgid16) used type cast instead of low2highgid/low2highuid macros for converting [GU]IDs, which led to incorrect handling of value of -1 (which ought to be considered invalid). Discovered by strace test suite. Cc: stable@vger.kernel.org Signed-off-by:
Eugene Syromiatnikov <esyr@redhat.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Bjorn Andersson authored
commit d1bf2d30 upstream. Propagate the error of devfreq_add_device() in devm_devfreq_add_device() rather than statically returning ENOMEM. This makes it slightly faster to pinpoint the cause of a returned error. Fixes: 8cd84092 ("PM / devfreq: Add resource-managed function for devfreq device") Cc: stable@vger.kernel.org Acked-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by:
-
Jack Morgenstein authored
commit 852f6927 upstream. Allocating steerable UD QPs depends on having at least one IB port, while releasing those QPs does not. As a result, when there are only ETH ports, the IB (RoCE) driver requests releasing a qp range whose base qp is zero, with qp count zero. When SR-IOV is enabled, and the VF driver is running on a VM over a hypervisor which treats such qp release calls as errors (rather than NOPs), we see lines in the VM message log like: mlx4_core 0002:00:02.0: Failed to release qp range base:0 cnt:0 Fix this by adding a check for a zero count in mlx4_release_qp_range() (which thus treats releasing 0 qps as a nop), and eliminating the check for device managed flow steering when releasing steerable UD QPs. (Freeing ib_uc_qpns_bitmap unconditionally is also OK, since it remains NULL when steerable UD QPs are not allocated). Fixes: 4196670b ("IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
- 16 Feb, 2018 3 commits
-
-
Greg Kroah-Hartman authored
-
Steven Rostedt (VMware) authored
commit 7b658656 upstream. __unregister_ftrace_function_probe() will incorrectly parse the glob filter because it resets the search variable that was setup by filter_parse_regex(). Al Viro reported this: After that call of filter_parse_regex() we could have func_g.search not equal to glob only if glob started with '!' or '*'. In the former case we would've buggered off with -EINVAL (not = 1). In the latter we would've set func_g.search equal to glob + 1, calculated the length of that thing in func_g.len and proceeded to reset func_g.search back to glob. Suppose the glob is e.g. *foo*. We end up with func_g.type = MATCH_MIDDLE_ONLY; func_g.len = 3; func_g.search = "*foo"; Feeding that to ftrace_match_record() will not do anything sane - we will be looking for names containing "*foo" (->len is ignored for that one). Link: http://lkml.kernel.org/r/20180127031706.GE13338@ZenIV.linux.org.uk Fixes: 3ba00929 ("ftrace: Introduce ftrace_glob structure") Reviewed-by:
Dmitry Safonov <0x7f454c46@gmail.com> Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Reported-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Eric W. Biederman authored
commit 6ac1dc73 upstream. Setting si_code to 0 is the same a setting si_code to SI_USER which is definitely not correct. With si_code set to SI_USER si_pid and si_uid will be copied to userspace instead of si_addr. Which is very wrong. So fix this by using a sensible si_code (SEGV_MAPERR) for this failure. Fixes: b920de1b ("mn10300: add the MN10300/AM33 architecture to the kernel") Cc: David Howells <dhowells@redhat.com> Cc: Masakazu Urade <urade.masakazu@jp.panasonic.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
