- 01 Oct, 2020 11 commits
-
-
Florian Fainelli authored
commit 414e7d76 upstream. skb_put_padto() will free the sk_buff passed as reference in case of errors, but we still need to check its return value and decide what to do. Detected by CoverityScan, CID#1416688 ("CHECKED_RETURN") Fixes: ee1c2797 ("net/hsr: Added support for HSR v1") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Florian Fainelli authored
[ Upstream commit c2b727df ] If we have unbound the PHY driver prior to calling phy_detach() (often via phy_disconnect()) then we can cause a NULL pointer de-reference accessing the driver owner member. The steps to reproduce are: echo unimac-mdio-0:01 > /sys/class/net/eth0/phydev/driver/unbind ip link set eth0 down Fixes: cafe8df8 ("net: phy: Fix lack of reference count on PHY driver") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Michael Chan authored
[ Upstream commit a5390690 ] All changes related to bp->link_info require the protection of the link_lock mutex. It's not sufficient to rely just on RTNL. Fixes: 163e9ef6 ("bnxt_en: Fix race when modifying pause settings.") Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit ff48b622 ] In tipc_buf_append() it may change skb's frag_list, and it causes problems when this skb is cloned. skb_unclone() doesn't really make this skb's flag_list available to change. Shuang Li has reported an use-after-free issue because of this when creating quite a few macvlan dev over the same dev, where the broadcast packets will be cloned and go up to the stack: [ ] BUG: KASAN: use-after-free in pskb_expand_head+0x86d/0xea0 [ ] Call Trace: [ ] dump_stack+0x7c/0xb0 [ ] print_address_description.constprop.7+0x1a/0x220 [ ] kasan_report.cold.10+0x37/0x7c [ ] check_memory_region+0x183/0x1e0 [ ] pskb_expand_head+0x86d/0xea0 [ ] process_backlog+0x1df/0x660 [ ] net_rx_action+0x3b4/0xc90 [ ] [ ] Allocated by task 1786: [ ] kmem_cache_alloc+0xbf/0x220 [ ] skb_clone+0x10a/0x300 [ ] macvlan_broadcast+0x2f6/0x590 [macvlan] [ ] macvlan_process_broadcast+0x37c/0x516 [macvlan] [ ] process_one_work+0x66a/0x1060 [ ] worker_thread+0x87/0xb10 [ ] [ ] Freed by task 3253: [ ] kmem_cache_free+0x82/0x2a0 [ ] skb_release_data+0x2c3/0x6e0 [ ] kfree_skb+0x78/0x1d0 [ ] tipc_recvmsg+0x3be/0xa40 [tipc] So fix it by using skb_unshare() instead, which would create a new skb for the cloned frag and it'll be safe to change its frag_list. The similar things were also done in sctp_make_reassembled_event(), which is using skb_copy(). Reported-by:
Shuang Li <shuali@redhat.com> Fixes: 37e22164 ("tipc: rename and move message reassembly function") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Wei Wang authored
[ Upstream commit ba9e04a7 ] Currently, in tcp_v4_reqsk_send_ack() and tcp_v4_send_reset(), we echo the TOS value of the received packets in the response. However, we do not want to echo the lower 2 ECN bits in accordance with RFC 3168 6.1.5 robustness principles. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 66d42ed8 ] There are a couple bugs here: 1) If opt[1] is zero then this results in a forever loop. If the value is less than 2 then it is invalid. 2) It assumes that "len" is more than sizeof(valid_accm) or 6 which can result in memory corruption. In the case of LCP_OPTION_ACCM, then we should check "opt[1]" instead of "len" because, if "opt[1]" is less than sizeof(valid_accm) then "nak_len" gets out of sync and it can lead to memory corruption in the next iterations through the loop. In case of LCP_OPTION_MAGIC, the only valid value for opt[1] is 6, but the code is trying to log invalid data so we should only discard the data when "len" is less than 6 because that leads to a read overflow. Reported-by:
ChenNan Of Chaitin Security Research Lab <whutchennan@gmail.com> Fixes: e022c2f0 ("WAN: new synchronous PPP implementation for generic HDLC.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Ben Hutchings authored
commit ea739a28 upstream. Commit 9e343e87 ("mtd: cfi: convert inline functions to macros") changed map_word_andequal() into a macro, but also changed the right hand side of the comparison from val3 to val2. Change it back to use val3 on the right hand side. Thankfully this did not cause a regression because all callers currently pass the same argument for val2 and val3. Fixes: 9e343e87 ("mtd: cfi: convert inline functions to macros") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
Nobuhiro Iwamatsu (CIP) <noburhio1.nobuhiro@toshiba.co.jp> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Shamir Rabinovitch authored
commit ef95a90a upstream. Validating input parameters should be done before getting the cm_id otherwise it can leak a cm_id reference. Fixes: 6a21dfc0 ("RDMA/ucma: Limit possible option size") Signed-off-by:
Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> [iwamatsu: Backported to 4.4, 4.9 and 4.14: adjust context] Signed-off-by:
Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
-
Muchun Song authored
[ Upstream commit b0399092 ] If a kprobe is marked as gone, we should not kill it again. Otherwise, we can disarm the kprobe more than once. In that case, the statistics of kprobe_ftrace_enabled can unbalance which can lead to that kprobe do not work. Fixes: e8386a0c ("kprobes: support probing module __exit function") Co-developed-by:
Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by:
Muchun Song <songmuchun@bytedance.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Song Liu <songliubraving@fb.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200822030055.32383-1-songmuchun@bytedance.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Rustam Kovhaev authored
[ Upstream commit f6588660 ] when kmalloc() fails in kvm_io_bus_unregister_dev(), before removing the bus, we should iterate over all other devices linked to it and call kvm_iodevice_destructor() for them Fixes: 90db1043 ("KVM: kvm_io_bus_unregister_dev() should never fail") Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+f196caa45793d6374707@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=f196caa45793d6374707Signed-off-by:
Rustam Kovhaev <rkovhaev@gmail.com> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200907185535.233114-1-rkovhaev@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Mark Salyzyn authored
commit 37bd2242 upstream. In pfkey_dump() dplen and splen can both be specified to access the xfrm_address_t structure out of bounds in__xfrm_state_filter_match() when it calls addr_match() with the indexes. Return EINVAL if either are out of range. Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: kernel-team@android.com Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
- 23 Sep, 2020 29 commits
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/lkml/20200921162035.136047591@linuxfoundation.org/Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Adam Borowski authored
commit 72a9c673 upstream. A spanking new machine I just got has all but one USB ports wired as 3.0. Booting defconfig resulted in no keyboard or mouse, which was pretty uncool. Let's enable that -- USB3 is ubiquitous rather than an oddity. As 'y' not 'm' -- recovering from initrd problems needs a keyboard. Also add it to the 32-bit defconfig. Signed-off-by:
Adam Borowski <kilobyte@angband.pl> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/20181009062803.4332-1-kilobyte@angband.plSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Alexey Kardashevskiy authored
commit 437ef802 upstream. There are 2 problems with it: 1. "<" vs expected "<<" 2. the shift number is an IOMMU page number mask, not an address mask as the IOMMU page shift is missing. This did not hit us before f1565c24 ("powerpc: use the generic dma_ops_bypass mode") because we had additional code to handle bypass mask so this chunk (almost?) never executed.However there were reports that aacraid does not work with "iommu=nobypass". After f1565c24, aacraid (and probably others which call dma_get_required_mask() before setting the mask) was unable to enable 64bit DMA and fall back to using IOMMU which was known not to work, one of the problems is double free of an IOMMU page. This fixes DMA for aacraid, both with and without "iommu=nobypass" in the kernel command line. Verified with "stress-ng -d 4". Fixes: 6a5c7be5 ("powerpc: Override dma_get_required_mask by platform hook and ops") Cc: stable@vger.kernel.org # v3.2+ Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200908015106.79661-1-aik@ozlabs.ruSigned-off-by:
-
Quentin Perret authored
commit 29231826 upstream. The CRC calculation done by genksyms is triggered when the parser hits EXPORT_SYMBOL*() macros. At this point, genksyms recursively expands the types of the function parameters, and uses that as the input for the CRC calculation. In the case of forward-declared structs, the type expands to 'UNKNOWN'. Following this, it appears that the result of the expansion of each type is cached somewhere, and seems to be re-used when/if the same type is seen again for another exported symbol in the same C file. Unfortunately, this can cause CRC 'stability' issues when a struct definition becomes visible in the middle of a C file. For example, let's assume code with the following pattern: struct foo; int bar(struct foo *arg) { /* Do work ... */ } EXPORT_SYMBOL_GPL(bar); /* This contains struct foo's definition */ #include "foo.h" int baz(struct foo *arg) { /* Do more work ... */ } EXPORT_SYMBOL_GPL(baz); Here, baz's CRC will be computed using the expansion of struct foo that was cached after bar's CRC calculation ('UNKOWN' here). But if EXPORT_SYMBOL_GPL(bar) is removed from the file (because of e.g. symbol trimming using CONFIG_TRIM_UNUSED_KSYMS), struct foo will be expanded late, during baz's CRC calculation, which now has visibility over the full struct definition, hence resulting in a different CRC for baz. The proper fix for this certainly is in genksyms, but that will take me some time to get right. In the meantime, we have seen one occurrence of this in the ehci-hcd code which hits this problem because of the way it includes C files halfway through the code together with an unlucky mix of symbol trimming. In order to workaround this, move the include done in ehci-hub.c early in ehci-hcd.c, hence making sure the struct definitions are visible to the entire file. This improves CRC stability of the ehci-hcd exports even when symbol trimming is enabled. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Quentin Perret <qperret@google.com> Link: https://lore.kernel.org/r/20200916171825.3228122-1-qperret@google.comSigned-off-by:
-
Tobias Diedrich authored
commit 3c5a87be upstream. These serial ports are exposed by the OOB-management-engine on RealManage-enabled network cards (e.g. AMD DASH enabled systems using Realtek cards). Because these have 3 BARs, they fail the "num_iomem <= 1" check in serial_pci_guess_board. I've manually checked the two IOMEM regions and BAR 2 doesn't seem to respond to reads, but BAR 4 seems to be an MMIO version of the IO ports (untested). With this change, the ports are detected: 0000:02:00.1: ttyS0 at I/O 0x2200 (irq = 82, base_baud = 115200) is a 16550A 0000:02:00.2: ttyS1 at I/O 0x2100 (irq = 55, base_baud = 115200) is a 16550A lspci output: 02:00.1 0700: 10ec:816a (rev 0e) (prog-if 02 [16550]) Subsystem: 17aa:5082 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 82 IOMMU group: 11 Region 0: I/O ports at 2200 [size=256] Region 2: Memory at fd715000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at fd704000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v2) Endpoint, MSI 01 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s (ok), Width x1 (ok) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Via message/WAKE#, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00000800 Capabilities: [d0] Vital Product Data Not readable Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [170 v1] Latency Tolerance Reporting Max snoop latency: 0ns Max no snoop latency: 0ns Capabilities: [178 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=150us PortTPowerOnTime=150us L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- T_CommonMode=0us LTR1.2_Threshold=0ns L1SubCtl2: T_PwrOn=10us 02:00.2 0700: 10ec:816b (rev 0e) [...same...] Signed-off-by:
Tobias Diedrich <tobiasdiedrich@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200914173628.GA22508@yamamaya.is-a-geek.orgSigned-off-by:
-
Hans de Goede authored
commit c4440b8a upstream. The keyboard drops keypresses early during boot unless both the nomux and reset quirks are set. Add DMI table entries for this. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1806085Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200907095656.13155-1-hdegoede@redhat.com Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Oliver Neukum authored
commit 9cdabcb3 upstream. read() needs to check whether the device has been disconnected before it tries to talk to the device. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+be5b5f86a162a6c281e6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200917103427.15740-1-oneukum@suse.com Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Oliver Neukum authored
commit 325b0087 upstream. The SCSI layer can go into an ugly loop if you ignore that a device is gone. You need to report an error in the command rather than in the return value of the queue method. We need to specifically check for ENODEV. The issue goes back to the introduction of the driver. Fixes: 115bb1ff ("USB: Add UAS driver") Signed-off-by:
-
Penghao authored
commit bcea6daf upstream. Add a USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for the BYD zhaoxin notebook. This notebook come with usb touchpad. And we would like to disable touchpad wakeup on this notebook by default. Signed-off-by:
Penghao <penghao@uniontech.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200907023026.28189-1-penghao@uniontech.comSigned-off-by:
-
Yu Kuai authored
[ Upstream commit 64c194c0 ] mtk_ddp_comp_init() is called in a loop in mtk_drm_probe(), if it fail, previous successive init component is not proccessed. Thus uninitialize valid component and put their device if component init failed. Fixes: 119f5173 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Signed-off-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by:
-
Thomas Bogendoerfer authored
[ Upstream commit b959b978 ] On A20R machines the interrupt pending bits in cause register need to be updated by requesting the chipset to do it. This needs to be done to find the interrupt cause and after interrupt service. In commit 0b888c7f ("MIPS: SNI: Convert to new irq_chip functions") the function to do after service update got lost, which caused spurious interrupts. Fixes: 0b888c7f ("MIPS: SNI: Convert to new irq_chip functions") Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Tetsuo Handa authored
[ Upstream commit ec0972ad ] syzbot is reporting OOB read at fbcon_resize() [1], for commit 39b3cffb ("fbcon: prevent user font height or width change from causing potential out-of-bounds access") is by error using registered_fb[con2fb_map[vc->vc_num]]->fbcon_par->p->userfont (which was set to non-zero) instead of fb_display[vc->vc_num].userfont (which remains zero for that display). We could remove tricky userfont flag [2], for we can determine it by comparing address of the font data and addresses of built-in font data. But since that commit is failing to fix the original OOB read [3], this patch keeps the change minimal in case we decide to revert altogether. [1] https://syzkaller.appspot.com/bug?id=ebcbbb6576958a496500fee9cf7aa83ea00b5920 [2] https://syzkaller.appspot.com/text?tag=Patch&x=14030853900000 [3] https://syzkaller.appspot.com/bug?id=6fba8c186d97cf1011ab17660e633b1cc4e080c9Reported-by:
syzbot <syzbot+b38b1ef6edf0c74a8d97@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 39b3cffb ("fbcon: prevent user font height or width change from causing potential out-of-bounds access") Cc: George Kennedy <george.kennedy@oracle.com> Link: https://lore.kernel.org/r/f6e3e611-8704-1263-d163-f52c906a4f06@I-love.SAKURA.ne.jpSigned-off-by:
-
Namhyung Kim authored
[ Upstream commit d26383dc ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f956 ("perf tests: Move pmu tests into separate object") Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Thomas Bogendoerfer authored
[ Upstream commit 564c836f ] Commit 930beb5a ("MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>") forgot to select the correct MIPS_L1_CACHE_SHIFT for SNI RM. This breaks non coherent DMA because of a wrong allocation alignment. Fixes: 930beb5a ("MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>") Signed-off-by:
-
Michael Kelley authored
[ Upstream commit 911e1987 ] vmbus_wait_for_unload() looks for a CHANNELMSG_UNLOAD_RESPONSE message coming from Hyper-V. But if the message isn't found for some reason, the panic path gets hung forever. Add a timeout of 10 seconds to prevent this. Fixes: 41571916 ("Drivers: hv: vmbus: avoid scheduling in interrupt context in vmbus_initiate_unload()") Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Reviewed-by:
Dexuan Cui <decui@microsoft.com> Reviewed-by:
Wei Liu <wei.liu@kernel.org> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit e9c006bc ] A new warning in Clang points out that the initialization of mux_pll_src_4plls_p appears incorrect: ../drivers/clk/rockchip/clk-rk3228.c:140:58: warning: suspicious concatenation of string literals in an array initialization; did you mean to separate the elements with a comma? [-Wstring-concatenation] PNAME(mux_pll_src_4plls_p) = { "cpll", "gpll", "hdmiphy" "usb480m" }; ^ , ../drivers/clk/rockchip/clk-rk3228.c:140:48: note: place parentheses around the string literal to silence warning PNAME(mux_pll_src_4plls_p) = { "cpll", "gpll", "hdmiphy" "usb480m" }; ^ 1 warning generated. Given the name of the variable and the same variable name in rv1108, it seems that this should have been four distinct elements. Fix it up by adding the comma as suggested. Fixes: 307a2e9a ("clk: rockchip: add clock controller for rk3228") Link: https://github.com/ClangBuiltLinux/linux/issues/1123Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20200810044020.2063350-1-natechancellor@gmail.comReviewed-by:
Heiko Stübner <heiko@sntech.de> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Evan Nimmo authored
[ Upstream commit 0a355aeb ] If something goes wrong (such as the SCL being stuck low) then we need to reset the PCA chip. The issue with this is that on reset we lose all config settings and the chip ends up in a disabled state which results in a lock up/high CPU usage. We need to re-apply any configuration that had previously been set and re-enable the chip. Signed-off-by:
Evan Nimmo <evan.nimmo@alliedtelesis.co.nz> Reviewed-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Laurent Pinchart authored
[ Upstream commit d2b86100 ] Enabling a whole subsystem from a single driver 'select' is frowned upon and won't be accepted in new drivers, that need to use 'depends on' instead. Existing selection of DMAENGINES will then cause circular dependencies. Replace them with a dependency. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
J. Bruce Fields authored
[ Upstream commit 8c6b6c79 ] Since p points at raw xdr data, there's no guarantee that it's NULL terminated, so we should give a length. And probably escape any special characters too. Reported-by:
Zhi Li <yieli@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Vincent Whitchurch authored
[ Upstream commit 837ba18d ] The "tx/rx-transfer - crossing PAGE_SIZE" test always fails when len=131071 and rx_offset >= 5: spi-loopback-test spi0.0: Running test tx/rx-transfer - crossing PAGE_SIZE ... with iteration values: len = 131071, tx_off = 0, rx_off = 3 with iteration values: len = 131071, tx_off = 0, rx_off = 4 with iteration values: len = 131071, tx_off = 0, rx_off = 5 loopback strangeness - rx changed outside of allowed range at: ...a4321000 spi_msg@ffffffd5a4157690 frame_length: 131071 actual_length: 131071 spi_transfer@ffffffd5a41576f8 len: 131071 tx_buf: ffffffd5a4340ffc Note that rx_offset > 3 can only occur if the SPI controller driver sets ->dma_alignment to a higher value than 4, so most SPI controller drivers are not affect. The allocated Rx buffer is of size SPI_TEST_MAX_SIZE_PLUS, which is 132 KiB (assuming 4 KiB pages). This test uses an initial offset into the rx_buf of PAGE_SIZE - 4, and a len of 131071, so the range expected to be written in this transfer ends at (4096 - 4) + 5 + 131071 == 132 KiB, which is also the end of the allocated buffer. But the code which verifies the content of the buffer reads a byte beyond the allocated buffer and spuriously fails because this out-of-bounds read doesn't return the expected value. Fix this by using ITERATE_LEN instead of ITERATE_MAX_LEN to avoid testing sizes which cause out-of-bounds reads. Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20200902132341.7079-1-vincent.whitchurch@axis.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
James Smart authored
[ Upstream commit 7b08e89f ] The driver is unable to successfully login with remote device. During pt2pt login, the driver completes its FLOGI request with the remote device having WWN precedence. The remote device issues its own (delayed) FLOGI after accepting the driver's and, upon transmitting the FLOGI, immediately recognizes it has already processed the driver's FLOGI thus it transitions to sending a PLOGI before waiting for an ACC to its FLOGI. In the driver, the FLOGI is received and an ACC sent, followed by the PLOGI being received and an ACC sent. The issue is that the PLOGI reception occurs before the response from the adapter from the FLOGI ACC is received. Processing of the PLOGI sets state flags to perform the REG_RPI mailbox command and proceed with the rest of discovery on the port. The same completion routine used by both FLOGI and PLOGI is generic in nature. One of the things it does is clear flags, and those flags happen to drive the rest of discovery. So what happened was the PLOGI processing set the flags, the FLOGI ACC completion cleared them, thus when the PLOGI ACC completes it doesn't see the flags and stops. Fix by modifying the generic completion routine to not clear the rest of discovery flag (NLP_ACC_REGLOGIN) unless the completion is also associated with performing a mailbox command as part of its handling. For things such as FLOGI ACC, there isn't a subsequent action to perform with the adapter, thus there is no mailbox cmd ptr. PLOGI ACC though will perform REG_RPI upon completion, thus there is a mailbox cmd ptr. Link: https://lore.kernel.org/r/20200828175332.130300-3-james.smart@broadcom.comCo-developed-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit ea403fde ] When pm8001_tag_alloc() fails, task should be freed just like it is done in the subsequent error paths. Link: https://lore.kernel.org/r/20200823091453.4782-1-dinghao.liu@zju.edu.cnAcked-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
-
Olga Kornievskaia authored
[ Upstream commit 3d7a9520 ] A client should be able to handle getting an ERR_DELAY error while doing a LOCK call to reclaim state due to delegation being recalled. This is a transient error that can happen due to server moving its volumes and invalidating its file location cache and upon reference to it during the LOCK call needing to do an expensive lookup (leading to an ERR_DELAY error on a PUTFH). Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
-
Miaohe Lin authored
commit eabe8618 upstream. pskb_carve_frag_list() may return -ENOMEM in pskb_carve_inside_nonlinear(). we should handle this correctly or we would get wrong sk_buff. Fixes: 6fa01ccd ("skbuff: Add pskb_extract() helper function") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Peter Oberparleiter authored
[ Upstream commit 40249c69 ] Using gcov to collect coverage data for kernels compiled with GCC 10.1 causes random malfunctions and kernel crashes. This is the result of a changed GCOV_COUNTERS value in GCC 10.1 that causes a mismatch between the layout of the gcov_info structure created by GCC profiling code and the related structure used by the kernel. Fix this by updating the in-kernel GCOV_COUNTERS value. Also re-enable config GCOV_KERNEL for use with GCC 10. Reported-by:
Colin Ian King <colin.king@canonical.com> Reported-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Peter Oberparleiter <oberpar@linux.ibm.com> Tested-by:
-
Yi Zhang authored
[ Upstream commit 60b1af64 ] 'parent' sysfs reads will yield '\0' bytes when the interface name has 15 chars, and there will no "\n" output. To reproduce, create one interface with 15 chars: [root@test ~]# ip a s enp0s29u1u7u3c2 2: enp0s29u1u7u3c2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000 link/ether 02:21:28:57:47:17 brd ff:ff:ff:ff:ff:ff inet6 fe80::ac41:338f:5bcd:c222/64 scope link noprefixroute valid_lft forever preferred_lft forever [root@test ~]# modprobe rdma_rxe [root@test ~]# echo enp0s29u1u7u3c2 > /sys/module/rdma_rxe/parameters/add [root@test ~]# cat /sys/class/infiniband/rxe0/parent enp0s29u1u7u3c2[root@test ~]# [root@test ~]# f="/sys/class/infiniband/rxe0/parent" [root@test ~]# echo "$(<"$f")" -bash: warning: command substitution: ignored null byte in input enp0s29u1u7u3c2 Use scnprintf and PAGE_SIZE to fill the sysfs output buffer. Cc: stable@vger.kernel.org Fixes: 8700e3e7 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200820153646.31316-1-yi.zhang@redhat.comSuggested-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
Yi Zhang <yi.zhang@redhat.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit 839f5ac0 ] Neither rxe->ifc_ops nor any of the function pointers in struct struct rxe_ifc_ops ever change. Hence remove the rxe->ifc_ops indirection mechanism. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Andrew Boyer <andrew.boyer@dell.com> Cc: Moni Shoua <monis@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Mathias Nyman authored
commit cfd54fa8 upstream. Userspace drivers that use a SetConfiguration() request to "lightweight" reset an already configured usb device might cause data toggles to get out of sync between the device and host, and the device becomes unusable. The xHCI host requires endpoints to be dropped and added back to reset the toggle. If USB core notices the new configuration is the same as the current active configuration it will avoid these extra steps by calling usb_reset_configuration() instead of usb_set_configuration(). A SetConfiguration() request will reset the device side data toggles. Make sure usb_reset_configuration() function also drops and adds back the endpoints to ensure data toggles are in sync. To avoid code duplication split the current usb_disable_device() function and reuse the endpoint specific part. Cc: stable <stable@vger.kernel.org> Tested-by:
Martin Thierer <mthierer@gmail.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200901082528.12557-1-mathias.nyman@linux.intel.comSigned-off-by:
-
Aleksander Morgado authored
commit 1ac69879 upstream. These modules have 2 different USB layouts: The default layout with PID 0x9205 (AT+CUSBSELNV=1) exposes 4 TTYs and an ECM interface: T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9205 Rev=00.00 S: Manufacturer=SimTech, Incorporated S: Product=SimTech SIM7080 S: SerialNumber=1234567890ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether The purpose of each TTY is as follows: * ttyUSB0: DIAG/QCDM port. * ttyUSB1: GNSS data. * ttyUSB2: AT-capable port (control). * ttyUSB3: AT-capable port (data). In the secondary layout with PID=0x9206 (AT+CUSBSELNV=86) the module exposes 6 TTY ports: T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9206 Rev=00.00 S: Manufacturer=SimTech, Incorporated S: Product=SimTech SIM7080 S: SerialNumber=1234567890ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option The purpose of each TTY is as follows: * ttyUSB0: DIAG/QCDM port. * ttyUSB1: GNSS data. * ttyUSB2: AT-capable port (control). * ttyUSB3: QFLOG interface. * ttyUSB4: DAM interface. * ttyUSB5: AT-capable port (data). Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
