- 2nd version of code for applying proper quirk depending on firmware version
  for lenovo/cptkbd (Mikhail Khvainitski)

- assorted fixes and optimizations for amd-sfh (Basavaraj Natikar)
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Considering that amd_sfh exists only on AMD platforms, set the AMD SFH
driver to depend on x86 to avoid build warnings or errors on other
architectures, as shown below.

drivers/hid/amd-sfh-hid/amd_sfh_pcie.c: In function 'amd_mp2_pci_probe':
drivers/hid/amd-sfh-hid/amd_sfh_pcie.c:413:21: error: 'boot_cpu_data'
undeclared (first use in this function); did you mean 'boot_cpu_hwid'?
  413 |                 if (boot_cpu_data.x86 >= 0x1A)
      |                     ^~~~~~~~~~~~~
      |                     boot_cpu_hwid

Fixes: 6296562f ("HID: amd_sfh: Extend MP2 register access to SFH")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240228145648.41c493ec@canb.auug.org.au/Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Internal touchscreen on Trogdor Pompom (AKA Dynabook Chromebook C1)
supports USI stylus. Unfortunately the HID descriptor for the stylus
interface does not contain "Stylus" physical collection, which makes
the kernel to try and pull battery information, resulting in errors.

Apply HID_BATTERY_QUIRK_AVOID_QUERY to the device.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Various MP2 register sets are supported by newer processors. Therefore,
extend MP2 register access to SFH.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

AMD SFH load takes longer time in initialization. Hence split and defer
initialization code to improve SFH module load time and boot time of the
system when SFH is available.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

HP ProBook x360 435 G7 using older version of firmware which doesn't
support disabling the interrupt for all commands. Hence avoid disabling
the interrupt for that particular model.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=218104
Fixes: b300667b ("HID: amd_sfh: Disable the interrupt for all command")
Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

HPD sensor data is not populating properly because of wrong order of HPD
sensor structure elements. So update the order of structure elements to
match the HPD sensor data received from the firmware.

Fixes: 24a31ea9 ("HID: amd_sfh: Add initial support for HPD sensor")
Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

During the initialization sensors may take some time to respond. Hence,
increase the sensor command timeouts in order to obtain status responses
within a maximum timeout.
Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Add device ID of Arrow Lake-S into ishtp support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Pull HID fixes from Jiri Kosina:

 - fix for 'MSC_SERIAL = 0' corner case handling in wacom driver (Jason
   Gerecke)

 - ACPI S3 suspend/resume fix for intel-ish-hid (Even Xu)

 - race condition fix preventing Wacom driver from losing events shortly
   after initialization (Jason Gerecke)

 - fix preventing certain Logitech HID++ devices from spamming kernel
   log (Oleksandr Natalenko)

* tag 'hid-for-linus-2024021501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: wacom: generic: Avoid reporting a serial of '0' to userspace
  HID: Intel-ish-hid: Ishtp: Fix sensor reads after ACPI S3 suspend
  HID: multitouch: Add required quirk for Synaptics 0xcddc device
  HID: wacom: Do not register input devices until after hid_hw_start
  HID: logitech-hidpp: Do not flood kernel log

Pull MIPS fixes from Thomas Bogendoerfer:

 - Fix for broken ipv6 checksums

 - Fix handling of exceptions in delay slots

* tag 'mips-fixes_6.8_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mm/memory: Use exception ip to search exception tables
  MIPS: Clear Cause.BD in instruction_pointer_set
  ptrace: Introduce exception_ip arch hook
  MIPS: Add 'memory' clobber to csum_ipv6_magic() inline assembler

Pull landlock test fixes from Mickaël Salaün:
 "Fix build issues for tests, and improve test compatibility"

* tag 'landlock-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  selftests/landlock: Fix capability for net_test
  selftests/landlock: Fix fs_test build with old libc
  selftests/landlock: Fix net_test build with old libc

Pull btrfs fixes from David Sterba:
 "A few regular fixes and one fix for space reservation regression since
  6.7 that users have been reporting:

   - fix over-reservation of metadata chunks due to not keeping proper
     balance between global block reserve and delayed refs reserve; in
     practice this leaves behind empty metadata block groups, the
     workaround is to reclaim them by using the '-musage=1' balance
     filter

   - other space reservation fixes:
      - do not delete unused block group if it may be used soon
      - do not reserve space for checksums for NOCOW files

   - fix extent map assertion failure when writing out free space inode

   - reject encoded write if inode has nodatasum flag set

   - fix chunk map leak when loading block group zone info"

* tag 'for-6.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: don't refill whole delayed refs block reserve when starting transaction
  btrfs: zoned: fix chunk map leak when loading block group zone info
  btrfs: reject encoded write if inode has nodatasum flag set
  btrfs: don't reserve space for checksums when writing to nocow files
  btrfs: add new unused block groups to the list of unused block groups
  btrfs: do not delete unused block group if it may be used soon
  btrfs: add and use helper to check if block group is used
  btrfs: don't drop extent_map for free space inode on write error

Merge tag 'linux_kselftest-kunit-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit fix from Shuah Khan:
 "One important fix to unregister kunit_bus when KUnit module is
  unloaded.

  Not doing so causes an error when KUnit module tries to re-register
  the bus when it gets reloaded"

* tag 'linux_kselftest-kunit-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: device: Unregister the kunit_bus on shutdown

Since commit 28270e25 ("btrfs: always reserve space for delayed refs
when starting transaction") we started not only to reserve metadata space
for the delayed refs a caller of btrfs_start_transaction() might generate
but also to try to fully refill the delayed refs block reserve, because
there are several case where we generate delayed refs and haven't reserved
space for them, relying on the global block reserve. Relying too much on
the global block reserve is not always safe, and can result in hitting
-ENOSPC during transaction commits or worst, in rare cases, being unable
to mount a filesystem that needs to do orphan cleanup or anything that
requires modifying the filesystem during mount, and has no more
unallocated space and the metadata space is nearly full. This was
explained in detail in that commit's change log.

However the gap between the reserved amount and the size of the delayed
refs block reserve can be huge, so attempting to reserve space for such
a gap can result in allocating many metadata block groups that end up
not being used. After a recent patch, with the subject:

  "btrfs: add new unused block groups to the list of unused block groups"

We started to add new block groups that are unused to the list of unused
block groups, to avoid having them around for a very long time in case
they are never used, because a block group is only added to the list of
unused block groups when we deallocate the last extent or when mounting
the filesystem and the block group has 0 bytes used. This is not a problem
introduced by the commit mentioned earlier, it always existed as our
metadata space reservations are, most of the time, pessimistic and end up
not using all the space they reserved, so we can occasionally end up with
one or two unused metadata block groups for a long period. However after
that commit mentioned earlier, we are just more pessimistic in the
metadata space reservations when starting a transaction and therefore the
issue is more likely to happen.

This however is not always enough because we might create unused metadata
block groups when reserving metadata space at a high rate if there's
always a gap in the delayed refs block reserve and the cleaner kthread
isn't triggered often enough or is busy with other work (running delayed
iputs, cleaning deleted roots, etc), not to mention the block group's
allocated space is only usable for a new block group after the transaction
used to remove it is committed.

A user reported that he's getting a lot of allocated metadata block groups
but the usage percentage of metadata space was very low compared to the
total allocated space, specially after running a series of block group
relocations.

So for now stop trying to refill the gap in the delayed refs block reserve
and reserve space only for the delayed refs we are expected to generate
when starting a transaction.

CC: stable@vger.kernel.org # 6.7+
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/9cdbf0ca9cdda1b4c84e15e548af7d7f9f926382.camel@intelfx.name/
Link: https://lore.kernel.org/linux-btrfs/CAL3q7H6802ayLHUJFztzZAVzBLJAGdFx=6FHNNy87+obZXXZpQ@mail.gmail.com/Tested-by: Ivan Shapovalov <intelfx@intelfx.name>
Reported-by: Heddxh <g311571057@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAE93xANEby6RezOD=zcofENYZOT-wpYygJyauyUAZkLv6XVFOA@mail.gmail.com/Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At btrfs_load_block_group_zone_info() we never drop a reference on the
chunk map we have looked up, therefore leaking a reference on it. So
add the missing btrfs_free_chunk_map() at the end of the function.

Fixes: 7dc66abb ("btrfs: use a dedicated data structure for chunk maps")
Reported-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Currently we allow an encoded write against inodes that have the NODATASUM
flag set, either because they are NOCOW files or they were created while
the filesystem was mounted with "-o nodatasum". This results in having
compressed extents without corresponding checksums, which is a filesystem
inconsistency reported by 'btrfs check'.

For example, running btrfs/281 with MOUNT_OPTIONS="-o nodatacow" triggers
this and 'btrfs check' errors out with:

   [1/7] checking root items
   [2/7] checking extents
   [3/7] checking free space tree
   [4/7] checking fs roots
   root 256 inode 257 errors 1040, bad file extent, some csum missing
   root 256 inode 258 errors 1040, bad file extent, some csum missing
   ERROR: errors found in fs roots
   (...)

So reject encoded writes if the target inode has NODATASUM set.

CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Currently when doing a write to a file we always reserve metadata space
for inserting data checksums. However we don't need to do it if we have
a nodatacow file (-o nodatacow mount option or chattr +C) or if checksums
are disabled (-o nodatasum mount option), as in that case we are only
adding unnecessary pressure to metadata reservations.

For example on x86_64, with the default node size of 16K, a 4K buffered
write into a nodatacow file is reserving 655360 bytes of metadata space,
as it's accounting for checksums. After this change, which stops reserving
space for checksums if we have a nodatacow file or checksums are disabled,
we only need to reserve 393216 bytes of metadata.

CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pull tracing tooling fixes from Steven Rostedt:
 "RTLA:

   - rtla tools are exiting with a positive value when usage() is
     called. Make them return 0 if the usage was called via -h/--help

   - the -P priority sets the sched priority for rtla workload. When the
     SCHED_OTHER scheduler is selected, it sets the rt_priority instead
     of the nice parameter. Setting the nice value is the correct thing,
     so fix it

   - rtla is failing to compile with clang due to unsupported options
     from gcc. Adjusting the compiler/linker options makes clang work
     properly

   - Remove the sched_getattr() unused function on utils.c

   - Fixes for variable initialization and size, reported by clang

  Verification:

   - rv is failing to compile with clang due to unsupported options from
     gcc. Adjusting the compiler/linker options makes clang work
     properly

   - Fix an uninitialized variable on in_kernel.c reported by clang"

* tag 'trace-tools-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tools/rtla: Exit with EXIT_SUCCESS when help is invoked
  tools/rtla: Replace setting prio with nice for SCHED_OTHER
  tools/rv: Fix curr_reactor uninitialized variable
  tools/rv: Fix Makefile compiler options for clang
  tools/rtla: Remove unused sched_getattr() function
  tools/rtla: Fix clang warning about mount_point var size
  tools/rtla: Fix uninitialized bucket/data->bucket_size warning
  tools/rtla: Fix Makefile compiler options for clang

The xf86-input-wacom driver does not treat '0' as a valid serial
number and will drop any input report which contains an
MSC_SERIAL = 0 event. The kernel driver already takes care to
avoid sending any MSC_SERIAL event if the value of serial[0] == 0
(which is the case for devices that don't actually report a
serial number), but this is not quite sufficient.
Only the lower 32 bits of the serial get reported to userspace,
so if this portion of the serial is zero then there can still
be problems.

This commit allows the driver to report either the lower 32 bits
if they are non-zero or the upper 32 bits otherwise.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Fixes: f85c9dc6 ("HID: wacom: generic: Support tool ID and additional tool types")
CC: stable@vger.kernel.org # v4.10
Signed-off-by: Jiri Kosina <jkosina@suse.com>

After legacy suspend/resume via ACPI S3, sensor read operation fails
with timeout. Also, it will cause delay in resume operation as there
will be retries on failure.

This is caused by commit f645a90e ("HID: intel-ish-hid:
ishtp-hid-client: use helper functions for connection"), which used
helper functions to simplify connect, reset and disconnect process.
Also avoid freeing and allocating client buffers again during reconnect
process.

But there is a case, when ISH firmware resets after ACPI S3 suspend,
ishtp bus driver frees client buffers. Since there is no realloc again
during reconnect, there are no client buffers available to send connection
requests to the firmware. Without successful connection to the firmware,
subsequent sensor reads will timeout.

To address this issue, ishtp bus driver does not free client buffers on
warm reset after S3 resume. Simply add the buffers from the read list
to free list of buffers.

Fixes: f645a90e ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218442Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Add support for the pointing stick (Accupoint) and 2 mouse buttons.

Present on some Toshiba/dynabook Portege X30 and X40 laptops.

It should close https://bugzilla.kernel.org/show_bug.cgi?id=205817Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Pull documentation fix from Jonathan Corbet:
 "A single fix to the kernel_feat extension for a bug that will crash
  the docs build in some situations"

* tag 'docs-6.8-fixes2' of git://git.lwn.net/linux:
  docs: kernel_feat.py: fix build error for missing files

On architectures with delay slot, instruction_pointer() may differ
from where exception was triggered.

Use exception_ip we just introduced to search exception tables to
get rid of the problem.

Fixes: 4bce37a6 ("mips/mm: Convert to using lock_mm_and_find_vma()")
Reported-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/r/75e9fd7b08562ad9b456a5bdaacb7cc220311cc9.camel@xry111.site/Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Clear Cause.BD after we use instruction_pointer_set to override
EPC.

This can prevent exception_epc check against instruction code at
new return address.
It won't be considered as "in delay slot" after epc being overridden
anyway.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

On architectures with delay slot, architecture level instruction
pointer (or program counter) in pt_regs may differ from where
exception was triggered.

Introduce exception_ip hook to invoke architecture code and determine
actual instruction pointer to the exception.

Link: https://lore.kernel.org/lkml/00d1b813-c55f-4365-8d81-d70258e10b16@app.fastmail.com/Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

After 'lib: checksum: Use aligned accesses for ip_fast_csum and
csum_ipv6_magic tests' was applied, the test_csum_ipv6_magic unit test
started failing for all mips platforms, both little and bit endian.
Oddly enough, adding debug code into test_csum_ipv6_magic() made the
problem disappear.

The gcc manual says:

"The "memory" clobber tells the compiler that the assembly code performs
 memory reads or writes to items other than those listed in the input
 and output operands (for example, accessing the memory pointed to by one
 of the input parameters)
"

This is definitely the case for csum_ipv6_magic(). Indeed, adding the
'memory' clobber fixes the problem.

Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Pull vfs fixes from Christian Brauner:

 - Fix performance regression introduced by moving the security
   permission hook out of do_clone_file_range() and into its caller
   vfs_clone_file_range().

   This causes the security hook to be called in situation were it
   wasn't called before as the fast permission checks were left in
   do_clone_file_range().

   Fix this by merging the two implementations back together and
   restoring the old ordering: fast permission checks first, expensive
   ones later.

 - Tweak mount_setattr() permission checking so that mount properties on
   the real rootfs can be changed.

   When we added mount_setattr() we added additional checks compared to
   legacy mount(2). If the mount had a parent then verify that the
   caller and the mount namespace the mount is attached to match and if
   not make sure that it's an anonymous mount.

   But the real rootfs falls into neither category. It is neither an
   anoymous mount because it is obviously attached to the initial mount
   namespace but it also obviously doesn't have a parent mount. So that
   means legacy mount(2) allows changing mount properties on the real
   rootfs but mount_setattr(2) blocks this. This causes regressions (See
   the commit for details).

   Fix this by relaxing the check. If the mount has a parent or if it
   isn't a detached mount, verify that the mount namespaces of the
   caller and the mount are the same. Technically, we could probably
   write this even simpler and check that the mount namespaces match if
   it isn't a detached mount. But the slightly longer check makes it
   clearer what conditions one needs to think about.

* tag 'vfs-6.8-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs: relax mount_setattr() permission checks
  remap_range: merge do_clone_file_range() into vfs_clone_file_range()

Fix rtla so that the following commands exit with 0 when help is invoked

rtla osnoise top -h
rtla osnoise hist -h
rtla timerlat top -h
rtla timerlat hist -h

Link: https://lore.kernel.org/linux-trace-devel/20240203001607.69703-1-jkacur@redhat.com

Cc: stable@vger.kernel.org
Fixes: 1eeb6328 ("rtla/timerlat: Add timerlat hist mode")
Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>

Since the sched_priority for SCHED_OTHER is always 0, it makes no
sence to set it.
Setting nice for SCHED_OTHER seems more meaningful.

Link: https://lkml.kernel.org/r/20240207065142.1753909-1-limingming3@lixiang.com

Cc: stable@vger.kernel.org
Fixes: b1696371 ("rtla: Helper functions for rtla")
Signed-off-by: limingming3 <limingming3@lixiang.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>

clang is reporting:

$ make HOSTCC=clang CC=clang LLVM_IAS=1

clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions
	-fstack-protector-strong -fasynchronous-unwind-tables
	-fstack-clash-protection  -Wall -Werror=format-security
	-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
	$(pkg-config --cflags libtracefs)  -I include
	-c -o src/in_kernel.o src/in_kernel.c
[...]

src/in_kernel.c:227:6: warning: variable 'curr_reactor' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
  227 |         if (!end)
      |             ^~~~
src/in_kernel.c:242:9: note: uninitialized use occurs here
  242 |         return curr_reactor;
      |                ^~~~~~~~~~~~
src/in_kernel.c:227:2: note: remove the 'if' if its condition is always false
  227 |         if (!end)
      |         ^~~~~~~~~
  228 |                 goto out_free;
      |                 ~~~~~~~~~~~~~
src/in_kernel.c:221:6: warning: variable 'curr_reactor' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
  221 |         if (!start)
      |             ^~~~~~
src/in_kernel.c:242:9: note: uninitialized use occurs here
  242 |         return curr_reactor;
      |                ^~~~~~~~~~~~
src/in_kernel.c:221:2: note: remove the 'if' if its condition is always false
  221 |         if (!start)
      |         ^~~~~~~~~~~
  222 |                 goto out_free;
      |                 ~~~~~~~~~~~~~
src/in_kernel.c:215:20: note: initialize the variable 'curr_reactor' to silence this warning
  215 |         char *curr_reactor;
      |                           ^
      |                            = NULL
2 warnings generated.

Which is correct. Setting curr_reactor to NULL avoids the problem.

Link: https://lkml.kernel.org/r/3a35551149e5ee0cb0950035afcb8082c3b5d05b.1707217097.git.bristot@kernel.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Donald Zickus <dzickus@redhat.com>
Fixes: 6d60f896 ("tools/rv: Add in-kernel monitor interface")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>

The following errors are showing up when compiling rv with clang:

 $ make HOSTCC=clang CC=clang LLVM_IAS=1
 [...]
  clang -O -g -DVERSION=\"6.8.0-rc1\" -flto=auto -ffat-lto-objects
  -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables
  -fstack-clash-protection  -Wall -Werror=format-security
  -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
  -Wno-maybe-uninitialized $(pkg-config --cflags libtracefs)
  -I include   -c -o src/utils.o src/utils.c
  clang: warning: optimization flag '-ffat-lto-objects' is not supported [-Wignored-optimization-argument]
  warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
  1 warning generated.

  clang -o rv -ggdb  src/in_kernel.o src/rv.o src/trace.o src/utils.o $(pkg-config --libs libtracefs)
  src/in_kernel.o: file not recognized: file format not recognized
  clang: error: linker command failed with exit code 1 (use -v to see invocation)
  make: *** [Makefile:110: rv] Error 1

Solve these issues by:
  - removing -ffat-lto-objects and -Wno-maybe-uninitialized if using clang
  - informing the linker about -flto=auto

Link: https://lkml.kernel.org/r/ed94a8ddc2ca8c8ef663cfb7ae9dd196c4a66b33.1707217097.git.bristot@kernel.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Fixes: 4bc4b131 ("rv: Add rv tool")
Suggested-by: Donald Zickus <dzickus@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>

Clang is reporting:

$ make HOSTCC=clang CC=clang LLVM_IAS=1
[...]
clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection  -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs)    -c -o src/utils.o src/utils.c
src/utils.c:241:19: warning: unused function 'sched_getattr' [-Wunused-function]
  241 | static inline int sched_getattr(pid_t pid, struct sched_attr *attr,
      |                   ^~~~~~~~~~~~~
1 warning generated.

Which is correct, so remove the unused function.

Link: https://lkml.kernel.org/r/eaed7ba122c4ae88ce71277c824ef41cbf789385.1707217097.git.bristot@kernel.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Donald Zickus <dzickus@redhat.com>
Fixes: b1696371 ("rtla: Helper functions for rtla")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>

clang is reporting this warning:

$ make HOSTCC=clang CC=clang LLVM_IAS=1
[...]
clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions
	-fstack-protector-strong -fasynchronous-unwind-tables
	-fstack-clash-protection  -Wall -Werror=format-security
	-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
	$(pkg-config --cflags libtracefs)    -c -o src/utils.o src/utils.c

src/utils.c:548:66: warning: 'fscanf' may overflow; destination buffer in argument 3 has size 1024, but the corresponding specifier may require size 1025 [-Wfortify-source]
  548 |         while (fscanf(fp, "%*s %" STR(MAX_PATH) "s %99s %*s %*d %*d\n", mount_point, type) == 2) {
      |                                                                         ^

Increase mount_point variable size to MAX_PATH+1 to avoid the overflow.

Link: https://lkml.kernel.org/r/1b46712e93a2f4153909514a36016959dcc4021c.1707217097.git.bristot@kernel.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Donald Zickus <dzickus@redhat.com>
Fixes: a957cbc0 ("rtla: Add -C cgroup support")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>

When compiling rtla with clang, I am getting the following warnings:

$ make HOSTCC=clang CC=clang LLVM_IAS=1

[..]
clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions
	-fstack-protector-strong -fasynchronous-unwind-tables
	-fstack-clash-protection  -Wall -Werror=format-security
	-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
	$(pkg-config --cflags libtracefs)
	-c -o src/osnoise_hist.o src/osnoise_hist.c
src/osnoise_hist.c:138:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
  138 |         if (data->bucket_size)
      |             ^~~~~~~~~~~~~~~~~
src/osnoise_hist.c:149:6: note: uninitialized use occurs here
  149 |         if (bucket < entries)
      |             ^~~~~~
src/osnoise_hist.c:138:2: note: remove the 'if' if its condition is always true
  138 |         if (data->bucket_size)
      |         ^~~~~~~~~~~~~~~~~~~~~~
  139 |                 bucket = duration / data->bucket_size;
src/osnoise_hist.c:132:12: note: initialize the variable 'bucket' to silence this warning
  132 |         int bucket;
      |                   ^
      |                    = 0
1 warning generated.

[...]

clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions
	-fstack-protector-strong -fasynchronous-unwind-tables
	-fstack-clash-protection  -Wall -Werror=format-security
	-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
	$(pkg-config --cflags libtracefs)
	-c -o src/timerlat_hist.o src/timerlat_hist.c
src/timerlat_hist.c:181:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
  181 |         if (data->bucket_size)
      |             ^~~~~~~~~~~~~~~~~
src/timerlat_hist.c:204:6: note: uninitialized use occurs here
  204 |         if (bucket < entries)
      |             ^~~~~~
src/timerlat_hist.c:181:2: note: remove the 'if' if its condition is always true
  181 |         if (data->bucket_size)
      |         ^~~~~~~~~~~~~~~~~~~~~~
  182 |                 bucket = latency / data->bucket_size;
src/timerlat_hist.c:175:12: note: initialize the variable 'bucket' to silence this warning
  175 |         int bucket;
      |                   ^
      |                    = 0
1 warning generated.

This is a legit warning, but data->bucket_size is always > 0 (see
timerlat_hist_parse_args()), so the if is not necessary.

Remove the unneeded if (data->bucket_size) to avoid the warning.

Link: https://lkml.kernel.org/r/6e1b1665cd99042ae705b3e0fc410858c4c42346.1707217097.git.bristot@kernel.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Donald Zickus <dzickus@redhat.com>
Fixes: 1eeb6328 ("rtla/timerlat: Add timerlat hist mode")
Fixes: 829a6c0b ("rtla/osnoise: Add the hist mode")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>

The following errors are showing up when compiling rtla with clang:

 $ make HOSTCC=clang CC=clang LLVM_IAS=1
 [...]

  clang -O -g -DVERSION=\"6.8.0-rc1\" -flto=auto -ffat-lto-objects
	-fexceptions -fstack-protector-strong
	-fasynchronous-unwind-tables -fstack-clash-protection  -Wall
	-Werror=format-security -Wp,-D_FORTIFY_SOURCE=2
	-Wp,-D_GLIBCXX_ASSERTIONS -Wno-maybe-uninitialized
	$(pkg-config --cflags libtracefs)    -c -o src/utils.o src/utils.c

  clang: warning: optimization flag '-ffat-lto-objects' is not supported [-Wignored-optimization-argument]
  warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
  1 warning generated.

  clang -o rtla -ggdb  src/osnoise.o src/osnoise_hist.o src/osnoise_top.o
  src/rtla.o src/timerlat_aa.o src/timerlat.o src/timerlat_hist.o
  src/timerlat_top.o src/timerlat_u.o src/trace.o src/utils.o $(pkg-config --libs libtracefs)

  src/osnoise.o: file not recognized: file format not recognized
  clang: error: linker command failed with exit code 1 (use -v to see invocation)
  make: *** [Makefile:110: rtla] Error 1

Solve these issues by:
  - removing -ffat-lto-objects and -Wno-maybe-uninitialized if using clang
  - informing the linker about -flto=auto

Link: https://lore.kernel.org/linux-trace-kernel/567ac1b94effc228ce9a0225b9df7232a9b35b55.1707217097.git.bristot@kernel.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Fixes: 1a7b22ab ("tools/rtla: Build with EXTRA_{C,LD}FLAGS")
Suggested-by: Donald Zickus <dzickus@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>

Pull timer fix from Borislav Petkov:

 - Make sure a warning is issued when a hrtimer gets queued after the
   timers have been migrated on the CPU down path and thus said timer
   will get ignored

* tag 'timers_urgent_for_v6.8_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimer: Report offline hrtimer enqueue

Pull x86 fixes from Borislav Petkov:

 - Correct the minimum CPU family for Transmeta Crusoe in Kconfig so
   that such hw can boot again

 - Do not take into accout XSTATE buffer size info supplied by userspace
   when constructing a sigreturn frame

 - Switch get_/put_user* to EX_TYPE_UACCESS exception handling when an
   MCE is encountered so that it can be properly recovered from instead
   of simply panicking

* tag 'x86_urgent_for_v6.8_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/Kconfig: Transmeta Crusoe is CPU family 5, not 6
  x86/fpu: Stop relying on userspace for info to fault in xsave buffer
  x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups