cppcheck reports a false positive:

sound/soc/codecs/da732x.c:1161:25: warning: Either the condition
'indiv<0' is redundant or there is division by zero at line
1161. [zerodivcond]
 fref = (da732x->sysclk / indiv);
                        ^
sound/soc/codecs/da732x.c:1158:12: note: Assuming that condition
'indiv<0' is not redundant
 if (indiv < 0)
           ^
sound/soc/codecs/da732x.c:1161:25: note: Division by zero
 fref = (da732x->sysclk / indiv);
                        ^

The code is awfully convoluted/confusing and can be simplified with a
single variable and the BIT macro.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210326221619.949961-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Cppcheck warning:

sound/soc/codecs/lm49453.c:1210:11: style: Variable 'pll_clk' is
assigned a value that is never used. [unreadVariable]

  pll_clk = BIT(4);
          ^

FIXME: What is the correct fix?
	/* fll clk slection */
	pll_clk = BIT(4);
	return 0;

is the assignment redundant or the 'return 0' a mistake?
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210326221619.949961-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'mute-led-rework' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.13

ALSA: control - add generic LED API

This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.

A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).

The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.

The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).

snd_ctl_led            24576  0

The sound driver implementation is really easy:

1) call snd_ctl_led_request() when control LED layer should be
   automatically activated
   / it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
        SNDRV_CTL_ELEM_ACCESS_SPK_LED or
        SNDRV_CTL_ELEM_ACCESS_MIC_LED

Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge series "ASoC: simple-card: cleanup and prepare for Multi CPU/Codec support" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

Hi Mark

I want to add new audio-graph-card2 driver which can support
not only DPCM, but also Multi-CPU/Codec, and Codec2Codec.
And it is also supporting user customization.

But before supporting such driver, we need to cleanup existing
simple-card / audio-graph, because these and new driver are
sharing code.

This patch-set are cleanup and prepare for Multi-CPU/Codec support.

Kuninori Morimoto (6):
  ASoC: simple-card-utils.c: remove old comment
  ASoC: simple-card-utils: alloc dai_link information for CPU/Codec/Platform
  ASoC: audio-graph: count DAI / link numbers as in order
  ASoC: audio-graph: cleanup graph_for_each_link()
  ASoC: simple-card: count DAI / link numbers as in order
  ASoC: simple-card: cleanup graph_for_each_link()

 include/sound/simple_card_utils.h     |   7 +-
 sound/soc/generic/audio-graph-card.c  | 112 +++++++++++++------------
 sound/soc/generic/simple-card-utils.c |  20 +++--
 sound/soc/generic/simple-card.c       | 115 +++++++++++++++-----------
 4 files changed, 143 insertions(+), 111 deletions(-)

--
2.25.1

Add address-cells and size-cells information to fix warnings
for rt1019.yaml.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20210331071046.12526-1-jack.yu@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The SoC sound core will generate a driver name by normalizing the card
name. However, most of the time that name does not tell anything about
the driver and is therefore useless for this purpose.

Make the driver name more useful by setting it explicitly during card
initialization.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210330180657.1867971-1-thierry.reding@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

s/struture/structure/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Link: https://lore.kernel.org/r/20210322064909.4189290-1-unixbhaskar@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add compatible string "asahi-kasei,ak5552" for ak5552
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1617176686-25528-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

AK5552 is a 32-bit 2ch ADC and has the same register
map as AK5558.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1617176686-25528-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

The Chuwi Hi8 tablet is using an analog mic on IN1 and has its
jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.

It also only has 1 speaker.

Add a quirk applying the correct settings for this configuration.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210325221054.22714-1-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

simple-card checks DT links 2 times. 1st is for counting DAIs / links
to allocating memory, 2nd is for detecting DAIs.
To detecting DAIs as CPU-dummy -> dummy-Codec order when DPCM case,
it uses  loops 2 times.
Because of this kind of complex background, it needs to use local
varuable for it, and each call-back functions need to care about it.

Now, 1st and 2nd DT link check are using same order,
thus we can share same code. This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875z1e1tov.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

simple-card checks DT links 2 times. 1st is for counting DAIs / links
to allocating memory, 2nd is for detecting DAIs.
To detecting DAIs as CPU-dummy -> dummy-Codec order when DPCM case,
it uses loops 2 times at 2nd DT link check.
But it doesn't do it at 1st DT link check.

	for (li.cpu = 1; li.cpu >= 0; li.cpu--) {
		/*
		 * Detect all CPU first, and Detect all Codec 2n
		 *
		 * In Normal sound case, all DAIs are detected
		 * as "CPU-Codec".
		 *
		 * In DPCM sound case,
		 * all CPUs   are detected as "CPU-dummy", and
		 * all Codecs are detected as "dummy-Codec".
		 * To avoid random sub-device numbering,
		 * detect "dummy-Codec" in last;
		 */
		ret = simple_for_each_link(...);
		...
	}

To prepare supporting multi-CPU/Codec, and code cleanup,
this patch use same loop for 1st DT link check, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877dlu1tp2.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

audio-graph checks DT links 2 times. 1st is for counting DAIs / links
to allocating memory, 2nd is for detecting DAIs.
To detecting DAIs as CPU-dummy -> dummy-Codec order when DPCM case,
it uses  loops 2 times.
Because of this kind of complex background, it needs to use local
varuable for it, and each call-back functions need to care about it.

Now, 1st and 2nd DT link check are using same order,
thus we can share same code. This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878s6a1tpf.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

audio-graph checks DT links 2 times. 1st is for counting DAIs / links
to allocating memory, 2nd is for detecting DAIs.
To detecting DAIs as CPU-dummy -> dummy-Codec order when DPCM case,
it uses loops 2 times at 2nd DT link check.
But it doesn't do it at 1st DT link check.

	for (li.cpu = 1; li.cpu >= 0; li.cpu--) {
		/*
		 * Detect all CPU first, and Detect all Codec 2n
		 *
		 * In Normal sound case, all DAIs are detected
		 * as "CPU-Codec".
		 *
		 * In DPCM sound case,
		 * all CPUs   are detected as "CPU-dummy", and
		 * all Codecs are detected as "dummy-Codec".
		 * To avoid random sub-device numbering,
		 * detect "dummy-Codec" in last;
		 */
		ret = graph_for_each_link(...);
		...
	}

To prepare supporting multi-CPU/Codec, and code cleanup,
this patch use same loop for 1st DT link check, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6qq1tpp.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

simple-card / audio-graph are assuming single CPU/Codec/Platform on
dai_link. Because of it, it is difficult to support Multi-CPU/Codec.

This patch allocs CPU/Codec/Platform dai_link imformation
instead of using existing props information. It can update to
multi-CPU/Codec, but is still assuming single-CPU/Codec for now.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blb61tpv.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

commit adb76b5b ("ASoC: soc-core: remove legacy style dai_link")
removed snd_soc_init_multicodec(). The comment on asoc_simple_init_priv()
is no longer needed. This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czvm1tq2.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

The nvidia,tegra210-ahub binding is missing schema for child nodes. This
results in warnings if 'additionalProperties: false' is set (or when the
tools implement 'unevaluatedProperties' support). Add the child nodes
and reference their schema if one exists.

Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Sameer Pujar <spujar@nvidia.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20210326195003.3756394-1-robh@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

We need to manage the kcontrol entries association for the LED trigger
from the user space. This patch adds a layer to the sysfs tree like:

/sys/devices/virtual/sound/ctl-led/mic
   + card0
   |  + attach
   |  + detach
   |  ...
   + card1
      + attach
      ...

Operations:

  attach and detach
    - amixer style ID is accepted and easy strings for numid and
      simple names
  reset
    - reset all associated kcontrol entries
  list
    - list associated kcontrol entries (numid values only)

Additional symlinks:

/sys/devices/virtual/sound/ctl-led/mic/card0/card ->
  /sys/class/sound/card0

/sys/class/sound/card0/controlC0/led-mic ->
  /sys/devices/virtual/sound/ctl-led/mic/card0
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-7-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

Create SYSFS/devices/virtual/sound/ctl-led tree
(with SYSFS/class/sound/ctl-led symlink).

  speaker/
    +-- mode
    +-- brightness
  mic/
    +-- mode
    +-- brightness

Copy the idea from the HDA driver and allow to set the audio
LEDs based on the various modes:

- follow mute
- follow moute (inverted to follow mute)
- off
- on

Also, the actual LED state is exposed.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-6-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

With the new snd-ctl-led module, we have a generic way
to trigger audio LEDs based on the sound control changes.

Remove the custom implementation from the HDA driver.

Move the LED initialization before snd_hda_gen_parse_auto_config()
call in all drivers to create marked controls there.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-5-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

The recent laptops have usually two LEDs assigned to reflect
the speaker and microphone mute state. This implementation
adds a tiny layer on top of the control API which calculates
the state for those LEDs using the driver callbacks.

Two new access flags are introduced to describe the controls
which affects the audio path settings (an easy code change
for drivers).

The LED resource can be shared with multiple sound cards with
this code. The user space controls may be added to the state
chain on demand, too.

This code should replace the LED code in the HDA driver and
add a possibility to easy extend the other drivers (ASoC
codecs etc.).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-4-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

The layer registration allows to handle an extra functionality
on top of the control API. It can be used for the audio
LED control for example.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-3-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

This helper is required for the following generic LED mute
patch. The helper also simplifies some other functions.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-2-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

Q6afe-clocks driver can get reprobed. For example if the APR services
are restarted after the firmware crash. However currently Q6afe-clocks
driver will oops because hw.init will get cleared during first _probe
call. Rewrite the driver to fill the clock data at runtime rather than
using big static array of clocks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Fixes: 520a1c39 ("ASoC: q6afe-clocks: add q6afe clock controller")
Link: https://lore.kernel.org/r/20210327092857.3073879-1-dmitry.baryshkov@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

load new topology file with speaker capture pipeline.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1616757689-22014-1-git-send-email-mac.chiang@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

There is a spelling mistake in a dev_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210330084710.997731-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

All of 3-pole and 4-pole jack are supported.

change since v2:
  - fixs missing blank at Kconfig.
  - fixs comment format and spelling mistake.
  - changes private structure mt6359_accdet to mt6359-accdet.h and uses this
    data as function parameter.
  - removes compatible string declaration.
  - uses regmap_read_poll_timeout as polling timer.
  - simplify jack detection and key detection report function.
  - adds mt6359_accdet_enable_jack_detect for sound card jack initialization.

change since v1:
  - adds mt6359 accdet binding document
  - adds mt6359 accdet driver

*** BLURB HERE ***

Argus Lin (2):
  dt-bindings: mediatek: mt6359: add ASoC mt6359 ASoC accdet jack
    document
  ASoC: mediatek: mt6359: add MT6359 accdet jack driver

 .../bindings/sound/mt6359-accdet.yaml         |  164 ++
 sound/soc/codecs/Kconfig                      |    8 +
 sound/soc/codecs/Makefile                     |    2 +
 sound/soc/codecs/mt6359-accdet.c              | 1080 ++++++++++
 sound/soc/codecs/mt6359-accdet.h              |  128 ++
 sound/soc/codecs/mt6359.h                     | 1864 ++++++++++++++++-
 6 files changed, 3139 insertions(+), 107 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/mt6359-accdet.yaml
 create mode 100644 sound/soc/codecs/mt6359-accdet.c
 create mode 100644 sound/soc/codecs/mt6359-accdet.h

--
2.18.0

This patch adds a function to find a match between pcm hw params and SSP
DAI config. Config is matched against sample rate and if match is found
current config is set. If match isn't found last matched config is left
as current i.e. current config is not touched. Functionality for SSP
DAIs with 1 config remains the same as before.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210326165150.255533-3-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Currently SSP DAIs don't have hw params callback function as there
wasn't anything to setup after initial topology loading. After enabling
multiple DAI configs the current config can be sent in the callback.

This patch changes the way SSP config ipc is sent to the dsp. Before it
was only sent once in topology loading, but now it will be additionally
sent always when stream is opened. Mechanism is similar as with HDA
DAIs.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210326165150.255533-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

ASoC parses multiple hw_configs defined in topology. However currently
in SOF only the first config is used and others are discarded. First
change SOF driver to parse and save possible multiple configs in ssp
case. Also save the default config value provided by ASoC. Functionality
with only one defined config stays the same.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210326165150.255533-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This fixes the following sparse warnings:

sound/soc/fsl/fsl_rpmsg.c:45:45: sparse: sparse: Using plain integer as NULL pointer
sound/soc/fsl/fsl_rpmsg.c:45:56: sparse: sparse: Using plain integer as NULL pointer

Fixes: b73d9e62 ("ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/1616988868-971-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix ACPI dependency kernel warning produced by powerpc
allyesconfig.

sound/soc/amd/acp-da7219-max98357a.c:684:28: warning:
'cz_rt5682_card' defined but not used [-Wunused-variable]

sound/soc/amd/acp-da7219-max98357a.c:671:28: warning: 'cz_card'
defined but not used [-Wunused-variable]
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/1616777074-5151-2-git-send-email-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

update SPDX license for acp machine driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/1616777074-5151-1-git-send-email-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

while CONFIG_SND_DESIGNWARE_PCM is not set, building with W=1 shows this:

sound/soc/dwc/local.h:127:6: warning: no previous prototype for ‘dw_pcm_push_tx’ [-Wmissing-prototypes]
 void dw_pcm_push_tx(struct dw_i2s_dev *dev) { }
      ^~~~~~~~~~~~~~
sound/soc/dwc/local.h:128:6: warning: no previous prototype for ‘dw_pcm_pop_rx’ [-Wmissing-prototypes]
 void dw_pcm_pop_rx(struct dw_i2s_dev *dev) { }
      ^~~~~~~~~~~~~
sound/soc/dwc/local.h:129:5: warning: no previous prototype for ‘dw_pcm_register’ [-Wmissing-prototypes]
 int dw_pcm_register(struct platform_device *pdev)
     ^~~~~~~~~~~~~~~

Change these to inline functions to fix the warnings.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210329150524.18184-1-yuehaibing@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'perf-tools-fixes-for-v5.12-2020-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tooling fixes from Arnaldo Carvalho de Melo:

 - Avoid write of uninitialized memory when generating PERF_RECORD_MMAP*
   records.

 - Fix 'perf top' BPF support related crash with perf_event_paranoid=3 +
   kptr_restrict.

 - Validate raw event with sysfs exported format bits.

 - Fix waipid on SIGCHLD delivery bugs in 'perf daemon'.

 - Change to use bash for daemon test on Debian, where the default is
   dash and thus fails for use of bashisms in this test.

 - Fix memory leak in vDSO found using ASAN.

 - Remove now useless (due to the fact that BPF now supports static
   vars) failing sub test "BPF relocation checker".

 - Fix auxtrace queue conflict.

 - Sync linux/kvm.h with the kernel sources.

* tag 'perf-tools-fixes-for-v5.12-2020-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf test: Change to use bash for daemon test
  perf record: Fix memory leak in vDSO found using ASAN
  perf test: Remove now useless failing sub test "BPF relocation checker"
  perf daemon: Return from kill functions
  perf daemon: Force waipid for all session on SIGCHLD delivery
  perf top: Fix BPF support related crash with perf_event_paranoid=3 + kptr_restrict
  perf pmu: Validate raw event with sysfs exported format bits
  perf synthetic events: Avoid write of uninitialized memory when generating PERF_RECORD_MMAP* records
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  perf synthetic-events: Fix uninitialized 'kernel_thread' variable
  perf auxtrace: Fix auxtrace queue conflict

Pull auxdisplay fix from Miguel Ojeda:
 "Remove in_interrupt() usage (Sebastian Andrzej Siewior)"

* tag 'auxdisplay-for-linus-v5.12-rc6' of git://github.com/ojeda/linux:
  auxdisplay: Remove in_interrupt() usage.

Pull x86 fixes from Ingo Molnar:
 "Two fixes:

   - Fix build failure on Ubuntu with new GCC packages that turn
     on -fcf-protection

   - Fix SME memory encryption PTE encoding bug - AFAICT the code
     worked on 4K page sizes (level 1) but had the wrong shift at
     higher page level orders (level 2 and higher)"

* tag 'x86-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Turn off -fcf-protection for realmode targets
  x86/mem_encrypt: Correct physical address calculation in __set_clr_pte_enc()

Pull locking fix from Ingo Molnar:
 "Fix the non-debug mutex_lock_io_nested() method to map to
  mutex_lock_io() instead of mutex_lock().

  Right now nothing uses this API explicitly, but this is an
  accident waiting to happen"

* tag 'locking-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/mutex: Fix non debug version of mutex_lock_io_nested()

Pull cifs fixes from Steve French:
 "Five cifs/smb3 fixes, two for stable.

  Includes an important fix for encryption and an ACL fix, as well as a
  fix for possible reflink data corruption"

* tag '5.12-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: fix cached file size problems in duplicate extents (reflink)
  cifs: Silently ignore unknown oplock break handle
  cifs: revalidate mapping when we open files for SMB1 POSIX
  cifs: Fix chmod with modefromsid when an older ACE already exists.
  cifs: Adjust key sizes and key generation routines for AES256 encryption