- 01 Oct, 2020 1 commit
-
-
Ville Syrjälä authored
The HDMI vs. not-HDMI check got inverted whem the bogus encoder->type checks were eliminated. So now we're using 0 as the link rate on DP and potentially non-zero on HDMI, which is exactly the opposite of what we want. The original bogus check actually worked more correctly by accident since if would always evaluate to true. Due to this we now always use the RBR/HBR1 vswing table and never ever the HBR2+ vswing table. That is probably not a good way to get a high quality signal at HBR2+ rates. Fix the check so we pick the right table. Cc: stable@vger.kernel.org Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Fixes: 94641eb6 ("drm/i915/display: Fix the encoder type check") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200930223642.28565-1-ville.syrjala@linux.intel.comReviewed-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Vandita Kulkarni <vandita.kulkarni@intel.com>
-
- 30 Sep, 2020 2 commits
-
-
Ville Syrjälä authored
Implement display w/a #1142. This supposedly fixes some underruns with FBC+VTd. Bspec says we should use the same programming regardless of circumstances. Apparently we should flip the magic bits before turning on any planes so let's put this into the early w/as. Cc: Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by:
-
Ville Syrjälä authored
CNL+ can report DIMM sizes in .5 GB units. In order to not trauncate away the .5 GB let's switch to storing the DIMM size in Gb units. Cc: Swati Sharma <swati2.sharma@intel.com> Signed-off-by:
-
- 28 Sep, 2020 24 commits
-
-
Vandita Kulkarni authored
In case of DSI cmd mode, we get hw vblank counter updated after the TE comes in, if we try to read the hw vblank counter in te handler we wouldnt have the udpated vblank counter yet. This will lead to a state where we would send the vblank event to the user space in the next te, though the frame update would have completed in the first TE duration itself. Hence switch to using software timestamp based vblank counter. v2: Use mode_flags from crtc_state (Ville) Acked-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200924124209.17916-6-vandita.kulkarni@intel.com
-
Vandita Kulkarni authored
In TE Gate mode or TE NO_GATE mode on every flip we need to set the frame update request bit. After this bit is set transcoder hardware will automatically send the frame data to the panel in case of TE NO_GATE mode, where it sends after it receives the TE event in case of TE_GATE mode. Once the frame data is sent to the panel, we see the frame counter updating. v2: Use intel_de_read/write v3: remove the usage of private_flags v4: Use icl_dsi in func names if non static, fix code formatting issues. (Jani) v5: Send frame update request at the beginning of pipe_update_end, use crtc_state mode_flags (Ville) v6: Add platform and dsi checks (Ville) Acked-by: -
Vandita Kulkarni authored
In case of dual link, we get the TE on slave. So clear the TE on slave DSI IIR. If we are operating in TE_GATE mode, after we do a frame update, the transcoder will send the frame data to the panel, after it receives a TE. Whereas if we are operating in NO_GATE mode then the transcoder will immediately send the frame data to the panel. We are not dealing with the periodic command mode here. v2: Pass only relevant masked bits to the handler (Jani) v3: Fix the check for cmd mode in TE handler function. v4: Use intel_handle_vblank instead of drm_handle_vblank (Jani) v3: Use static on handler func (Jani) Acked-by:
-
Vandita Kulkarni authored
Configure TE interrupt as part of the vblank enable call flow. v2: Hide the private flags check inside configure_te (Jani) v3: Fix the position of masking de_port_masked for DSI_TE. v4: Simplify the caller of configure_te (Jani) v5: Clear IIR, remove the usage of private_flags v6: including icl_dsi header is not needed Acked-by:
-
Vandita Kulkarni authored
We need details about enabling TE on which port before we enable TE through vblank enable path. This is based on the configuration that we receive from the VBT wrt ports, dual_link. Reviewed-by:
-
Ville Syrjälä authored
Since gamma_mode can have more than two values on ilk+ let's use switch statements when interpreting them. v2: Fix typo (Uma) Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Since bdw_read_lut_10() uses the auto-increment mode we must have an equal number of entries in the software LUT and the hardware LUT. WARN if that is not the case. Reviewed-by:
-
Ville Syrjälä authored
CGM_PIPE_GAMMA_RED_MASK & co. are misplaced. Move then below the relevant register. And while at it add the degamma counterparts. Reviewed-by:
-
Ville Syrjälä authored
Move chv_cgm_gamma_pack() next to the other CGM gamma functions. Right now it's stuck in the middle of the CGM degamma functions. Reviewed-by:
-
Ville Syrjälä authored
Just for some extra consistency let's reset the glk degamma LUT index back to 0 after we're dong trawling the LUT. Reviewed-by:
-
Ville Syrjälä authored
glk_read_lut_10() works just fine for all bdw+ platforms, so rename it. Reviewed-by:
-
Ville Syrjälä authored
Dump the sizes of the software LUTs in the state dump. Makes it a bit easier to see which is present without having to decode it from the gamma_mode and other bits of state. v2: Drop a spurious "is" in commit msg (Uma) Reviewed-by:
-
Ville Syrjälä authored
Move the MST master transcoder dump next to the other transcoder bits. Reviewed-by:
-
Ville Syrjälä authored
Previously intel_dump_pipe_config() used to dump the full crtc state whether or not the crtc was logically enabled or not. As that meant occasionally dumping confusing stale garbage I changed it to check whether the crtc is logically enabled or not. However I did not realize that the state checker readout code does not populate crtc_state.hw.{active,enabled}. Hence the state checker dump would only give us a full dump of the sw state but not the hw state. Fix that by populating those bits of the hw state as well. Reviewed-by: -
Ville Syrjälä authored
Move the intel_crtc_atomic_check() call out from the variable declarations to a place where we can actually see it. Signed-off-by:
-
Ville Syrjälä authored
intel_{enable,disable}_sagv() are no longer needed outside the compilation unit. Make them static. Signed-off-by: -
Karthik B S authored
Enable asynchronous flips in i915 for gen9+ platforms. v2: -Async flip enablement should be a stand alone patch (Paulo) v3: -Move the patch to the end of the series (Paulo) v4: -Rebased. v5: -Rebased. v6: -Rebased. v7: -Rebased. v8: -Rebased. v9: -Rebased. v10: -Rebased. Signed-off-by:
Karthik B S <karthik.b.s@intel.com> Signed-off-by:
-
Karthik B S authored
Add the details of the implementation of asynchronous flips for i915. v7: -Rebased. v8: -Rebased. v9: -Rebased. v10: Move all documentation changes to this patch. (Ville) Signed-off-by:
-
Karthik B S authored
In Gen 9 and Gen 10 platforms, async address update enable bit is double buffered. Due to this, during the transition from async flip to sync flip we have to wait until this bit is updated before continuing with the normal commit for sync flip. v9: -Rename skl_toggle_async_sync() to skl_disable_async_flip_wa(). (Ville) -Place the declarations appropriately as per need. (Ville) -Take the lock before the reg read. (Ville) -Fix comment and formatting. (Ville) -Use IS_GEN_RANGE() for gen check. (Ville) -Move skl_disable_async_flip_wa() to intel_pre_plane_update(). (Ville) v10: -Rebased. Signed-off-by: -
Karthik B S authored
This hook is added to avoid writing other plane registers in case of async flips, so that we do not write the double buffered registers during async surface address update. v7: -Plane ctl needs bits from skl_plane_ctl_crtc as well. (Ville) -Add a vfunc for skl_program_async_surface_address and call it from intel_update_plane. (Ville) v8: -Rebased. v9: -Use if-else instead of return in intel_update_plane(). (Ville) -Rename 'program_async_surface_address' to 'async_flip'. (Ville) v10: -Check if async_flip hook is present before calling it. Otherwise it will OOPS during legacy cursor updates. (Ville) v11: -Rename skl_program_async_surface_address(). (Ville) Signed-off-by: -
Karthik B S authored
Since the flip done event will be sent in the flip_done_handler, no need to add the event to the list and delay it for later. v2: -Moved the async check above vblank_get as it was causing issues for PSR. v3: -No need to wait for vblank to pass, as this wait was causing a 16ms delay once every few flips. v4: -Rebased. v5: -Rebased. v6: -Rebased. v7: -No need of irq disable if we are not doing vblank evade. (Ville) v8: -Rebased. v9: -Move the return in intel_pipe_update_end before tracepoint. (Ville) v10: Rebased. Signed-off-by: -
Karthik B S authored
If flip is requested on any other plane, reject it. Make sure there is no change in fbc, offset and framebuffer modifiers when async flip is requested. If any of these are modified, reject async flip. v2: -Replace DRM_ERROR (Paulo) -Add check for changes in OFFSET, FBC, RC(Paulo) v3: -Removed TODO as benchmarking tests have been run now. v4: -Added more state checks for async flip (Ville) -Moved intel_atomic_check_async to the end of intel_atomic_check as the plane checks needs to pass before this. (Ville) -Removed crtc_state->enable_fbc check. (Ville) -Set the I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP flag for async flip case as scanline counter is not reliable here. v5: -Fix typo and other check patch errors seen in CI in 'intel_atomic_check_async' function. v6: -Don't call intel_atomic_check_async multiple times. (Ville) -Remove the check for n_planes in intel_atomic_check_async -Added documentation for async flips. (Paulo) v7: -Replace 'intel_plane' with 'plane'. (Ville) -Replace all uapi.foo as hw.foo. (Ville) -Do not use intel_wm_need_update function. (Ville) -Add destination coordinate check. (Ville) -Do not allow async flip with linear buffer on older hw as it has issues with this. (Ville) -Remove break after intel_atomic_check_async. (Ville) v8: -Rebased. v9: -Replace DRM_DEBUG_KMS with drm_dbg_kms(). (Ville) -Fix comment formatting. (Ville) -Remove gen specific checks. (Ville) -Remove irrelevant FB size check. (Ville) -Add missing stride check. (Ville) -Use drm_rect_equals() instead of individual checks. (Ville) -Call intel_atomic_check_async before state dump. (Ville) v10: -Fix the checkpatch errors seen on CI. v11: -Use const for all plane/crtc states. (Ville) -Use 'switch' instead of 'if' for modifier check. (Ville) -Move documentation changes to a single patch. (Ville) Signed-off-by: -
Karthik B S authored
Set the Async Address Update Enable bit in plane ctl when async flip is requested. v2: -Move the Async flip enablement to individual patch (Paulo) v3: -Rebased. v4: -Add separate plane hook for async flip case (Ville) v5: -Rebased. v6: -Move the plane hook to separate patch. (Paulo) -Remove the early return in skl_plane_ctl. (Paulo) v7: -Move async address update enable to skl_plane_ctl_crtc() (Ville) v8: -Rebased. v9: -Rebased. v10: -Rebased. Signed-off-by: -
Karthik B S authored
Add enable/disable flip done functions and the flip done handler function which handles the flip done interrupt. Enable the flip done interrupt in IER. Enable flip done function is called before writing the surface address register as the write to this register triggers the flip done interrupt Flip done handler is used to send the page flip event as soon as the surface address is written as per the requirement of async flips. The interrupt is disabled after the event is sent. v2: -Change function name from icl_* to skl_* (Paulo) -Move flip handler to this patch (Paulo) -Remove vblank_put() (Paulo) -Enable flip done interrupt for gen9+ only (Paulo) -Enable flip done interrupt in power_well_post_enable hook (Paulo) -Removed the event check in flip done handler to handle async flips without pageflip events. v3: -Move skl_disable_flip_done out of interrupt handler (Paulo) -Make the pending vblank event NULL in the beginning of flip_done_handler to remove sporadic WARN_ON that is seen. v4: -Calculate timestamps using flip done time stamp and current timestamp for async flips (Ville) v5: -Fix the sparse warning by making the function 'g4x_get_flip_counter' static.(Reported-by: kernel test robot <lkp@intel.com>) -Fix the typo in commit message. v6: -Revert back to old time stamping code. -Remove the break while calling skl_enable_flip_done. (Paulo) v7: -Rebased. v8: -Rebased. v9: -Use struct drm_i915_private *i915 in new code. (Ville) -Use intel_crtc instead of drm_crtc. (Ville) -Do not mix the flip done and vblank hooks. (Ville) v10: -Rebased. Signed-off-by:
-
- 24 Sep, 2020 5 commits
-
-
Ville Syrjälä authored
When validating a "YCbCr 4:2:0 only" mode we must take into account the fact that we're going to be outputting YCbCr 4:2:0 or 4:4:4 (when a DP->HDMI protocol converter is doing the 4:2:0 downsampling). For YCbCr 4:4:4 the minimum output bpc is 8, for YCbCr 4:2:0 it'll be half that. The currently hardcoded 6bpc is only correct for RGB 4:4:4, which we will never use with these kinds of modes. Figure out what we're going to output and use the correct min bpp value to validate whether the link has sufficient bandwidth. Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
-
Ville Syrjälä authored
Pass the output_format directly to intel_dp_{min,output}_bpp() rather than passing in the crtc_state and digging out the output_format inside the functions. This will allow us to reuse the functions for mode validation purposes. Signed-off-by: -
Ville Syrjälä authored
Refactor the output_format calculation into a helper so that we can reuse it for mode validation as well. Signed-off-by:
-
Ramalingam C authored
When roll over detected for seq_num_m, we shouldn't continue with stream management with rolled over value. So we are terminating the stream management retry, on roll over of the seq_num_m. v2: using drm_dbg_kms instead of DRM_DEBUG_KMS [Anshuman] v3: dev_priv is used as i915 [JaniN] v4: roll over is detected at the start of the stream management. Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> [v3] Tested-by:
Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200923132435.17039-3-anshuman.gupta@intel.com
-
Ramalingam C authored
As per the HDCP2.2 compliance test 1B-10 expectation, when stream management for a repeater fails, we retry thrice and when it fails in all retries, HDCP2.2 reauthentication aborted at kernel. v2: seq_num_m++ is extended for steam management failures too.[Anshuman] v3: use drm_dbg_kms instead of DRM_DEBUG_KMS [Anshuman] v4: dev_priv is used as i915 [JaniN] v5: Few improvisements are done [Sean] Signed-off-by:
-
- 22 Sep, 2020 2 commits
-
-
Mauro Carvalho Chehab authored
The name of the argument is different, causing those warnings: ./drivers/gpu/drm/drm_edid.c:3754: warning: Function parameter or member 'video_code' not described in 'drm_display_mode_from_cea_vic' ./drivers/gpu/drm/drm_edid.c:3754: warning: Excess function parameter 'vic' description in 'drm_display_mode_from_cea_vic' Fixes: 7af655bc ("drm/dp: Add drm_dp_downstream_mode()") Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200922175357.42998-3-lyude@redhat.com
-
Mauro Carvalho Chehab authored
As warned by kernel-doc: ./drivers/gpu/drm/drm_dp_helper.c:385: warning: Function parameter or member 'type' not described in 'drm_dp_downstream_is_type' ./drivers/gpu/drm/drm_dp_helper.c:886: warning: Function parameter or member 'dev' not described in 'drm_dp_downstream_mode' Some function parameters weren't documented. Fixes: 38784f6f ("drm/dp: Add helpers to identify downstream facing port types") Signed-off-by:
-
- 17 Sep, 2020 6 commits
-
-
Rodrigo Vivi authored
Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Swathi Dhanavanthri authored
This workaround applies to all TGL and RKL steppings. Signed-off-by:
Swathi Dhanavanthri <swathi.dhanavanthri@intel.com> Reviewed-by:
-
Ville Syrjälä authored
Since we now have proper old and new cdclk state we no longer need to keep this flag to indicate that the force min cdclk has changed. Instead just check if the old vs. new value are different. Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Ville Syrjälä authored
With the dbuf code mostly converted over to the new global state handling we can remove the leftovers of the old global state stuff. Signed-off-by:
-
Ville Syrjälä authored
For platforms that can't do native 4:2:0 outout we may still be able to do it by getting the DP->HDMI protocol converter to perform the 4:4:4->4:2:0 downsamling for us. In this case we have to configure our hardware to output YCbCr 4:4:4, which we've already hooked up so all we need to do is flip the switch. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Add helpers to determine whether the DFP supports YCbCr 4:2:0 passthrough or YCbCr 4:4:4->4:2:0 conversion. v2: Add kdocs (Lyude) Signed-off-by:
-
