- 15 Mar, 2017 4 commits
-
-
Tomas Winkler authored
Fix compilation warning: drivers/scsi/ufs/ufshcd.c:7645:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if ((value < UFS_PM_LVL_0) || (value >= UFS_PM_LVL_MAX)) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Don Brace authored
Resets can take longer than DEFAULT_TIMEOUT. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Don Brace authored
Avoid rescan storms. No need to queue another if one is pending. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Don Brace authored
- Add in a new case for volume offline. Resolves internal testing bug for multilun array management. - Return correct status for failed TURs. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
- 14 Mar, 2017 4 commits
-
-
Shivasharan S authored
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Shivasharan S authored
Without this fix, raid6 performance will not be optimal. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Shivasharan S authored
Return value check of atomic_dec_if_positive is required as it returns old value minus one. Without this fix, driver will send small ios to firmware path and that will be a performance issue. Not critical, but good to have r1_ldio_hint as default value in sdev private. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Shivasharan S authored
Without this fix, driver will enable INTx Interrupt pin even though MSI-x vectors are enabled. See below lspci output. DisINTx is unset for MSIx setup. lspci -s 85:00.0 -vvv |grep INT |grep Control Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- After applying this fix, driver will enable INTx Interrupt pin only if Legacy interrupt method is required. See below lspci output. DisINTx is set for MSIx setup. lspci -s 85:00.0 -vvv |grep INT |grep Control Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
- 08 Mar, 2017 2 commits
-
-
Anton Blanchard authored
We see lpfc devices regularly fail during kexec. Fix this by adding a shutdown method which mirrors the remove method. Cc: <stable@vger.kernel.org> Signed-off-by: Anton Blanchard <anton@samba.org> Reviewed-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Tested-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Stephen Hemminger authored
Hyper-V host emulation of SCSI for virtual DVD device reports SCSI version 0 (UNKNOWN) but is still capable of supporting REPORTLUN. Without this patch, a GEN2 Linux guest on Hyper-V will not boot 4.11 successfully with virtual DVD ROM device. What happens is that the SCSI scan process falls back to doing sequential probing by INQUIRY. But the storvsc driver has a previous workaround that masks/blocks all errors reports from INQUIRY (or MODE_SENSE) commands. This workaround causes the scan to then populate a full set of bogus LUN's on the target and then sends kernel spinning off into a death spiral doing block reads on the non-existent LUNs. By setting the correct blacklist flags, the target with the DVD device is scanned with REPORTLUN and that works correctly. Patch needs to go in current 4.11, it is safe but not necessary in older kernels. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
- 07 Mar, 2017 27 commits
-
-
James Smart authored
Revise lpfc version number to 11.2.0.10 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
This patch addresses the smatch issues identified by Dan Carpenter in http://www.spinics.net/lists/linux-scsi/msg105665.html The issues are: drivers/scsi/lpfc/lpfc_ct.c:943 lpfc_cmpl_ct_cmd_gft_id() error: we previously assumed 'ndlp' could be null (see line 928) Action: moved under if check drivers/scsi/lpfc/lpfc_nvmet.c:1694 lpfc_nvmet_unsol_issue_abort() error: we previously assumed 'ndlp' could be null (see line 1690) Action: conditionalized arg in printf stmt drivers/scsi/lpfc/lpfc_nvmet.c:1792 lpfc_nvmet_sol_fcp_issue_abort() error: we previously assumed 'ndlp' could be null (see line 1788) Action: conditionalized arg in printf stmt Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
This patch addresses the smatch issues identified by Dan Carpenter in http://www.spinics.net/lists/linux-scsi/msg105663.html The issues are: drivers/scsi/lpfc/lpfc_hbadisc.c:316 lpfc_dev_loss_tmo_handler() warn: we tested 'vport->load_flag & 2' before and it was 'false' Action: removed item from test drivers/scsi/lpfc/lpfc_hbadisc.c:701 lpfc_work_done() warn: test_bit() takes a bit number Action: changed definition so bit number drivers/scsi/lpfc/lpfc_hbadisc.c:2206 lpfc_mbx_cmpl_fcf_scan_read_fcf_rec() error: uninitialized symbol 'vlan_id'. drivers/scsi/lpfc/lpfc_hbadisc.c:2582 lpfc_mbx_cmpl_fcf_rr_read_fcf_rec() error: uninitialized symbol 'vlan_id'. drivers/scsi/lpfc/lpfc_hbadisc.c:2683 lpfc_mbx_cmpl_read_fcf_rec() error: uninitialized symbol 'vlan_id'. Action: initilized value drivers/scsi/lpfc/lpfc_hbadisc.c:4025 lpfc_register_remote_port() error: we previously assumed 'rdata' could be null (see line 4023) Action: refactored check block drivers/scsi/lpfc/lpfc_hbadisc.c:4613 lpfc_sli4_dequeue_nport_iocbs() error: double unlock 'irq:' Action: removed inner irq reference Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
NVME merge reverted diag port names to the physical port. They should be the vport. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Remove nvme teardown calls that should not be there on sli3 devices Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Correct a merge error that had debug data printed twice for the same element Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Without apriori understanding of what the define is, the name gives a very different impression of what it is (a max delay value for an EQ). Rename the define so it reflects what it is: the number of EQ IDs that can be set in one instance of the MODIFY_EQ_DELAY mbx command. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Reworked Kconfig so that lfpc only requires the scsi stack. NVME Initiator and NVME Target support can be enabled if the other NVMe subsystems have been enabled. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Christoph's prior patch missed the template for the sli3 adapters, which is now the "no host reset" template. Add the transport eh_timed_out handler to the no host reset template Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
A previous change unilaterally removed the hba reset entry point from the sli3 host template. This was done to allow tape devices being used for back up from being removed. Why was this done ? When there was non-responding device on the fabric, the error escalation policy would escalate to the reset handler. When the reset handler was called, it would reset the adapter, dropping link, thus logging out and terminating all i/o's - on any target. If there was a tape device on the same adapter that wasn't in error, it would kill the tape i/o's, effectively killing the tape device state. With the reset point removed, the adapter reset avoided the fabric logout, allowing the other devices to continue to operate unaffected. A hack - yes. Hint: we really need a transport I_T nexus reset callback added to the eh process (in between the SCSI target reset and hba reset points), so a fc logout could occur to the one bad target only and stop the error escalation process. This patch commonizes the approach so it can be used for sli3 and sli4 adapters, but mandates the admin, via module parameter, specifically identify which adapters the resets are to be removed for. Additionally, bus_reset, which sends Target Reset TMFs to all targets, is also removed from the template as it too has the same effect as the adapter reset. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
previous code did little more than log a message. This patch adds abort path support, modeled after the SCSI code paths. Currently addresses only the initiator path. Target path under development, but stubbed out. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
nvme bufs get allocated even when the registration fails. Move allocation into the rsgistration success path. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
For both initiator and target: if WQ is full, return -EBUSY. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Word 1 in NVME CMD IU appears byte swapped from value placed in WQE Should be Big Endian value in WQE word 16 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
NVME LS requests and responses had wrong R_CTL values. Use the FC4 ELS Request and Response defines (defines badly named, they are FC4 LS's) instead of the base ELS values. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
if REG_VPI fails, the driver was incorrectly issuing INIT_VFI (a SLI4 command) on a SLI3 adapter. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
From: Colin Ian King <colin.king@canonical.com> In the case where sglq is null, the current code just returns without unlocking the spinlock sql_list_lock. Fix this by breaking out of the while loop and the exit path will then unlock and return NULL as was the original intention. Detected by CoverityScan, CID#1411635 ("Missing unlock") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
From: Colin Ian King <colin.king@canonical.com> dma_buf->iocbq is being dereferenced immediately before it is being null checked, so we have a potential null pointer dereference bug. Fix this by only dereferencing it only once we have passed a null check on the pointer. Detected by CoverityScan, CID#1411652 ("Dereference before null check") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
From: Colin Ian King <colin.king@canonical.com> The sanity check for hrq should be moved to before the deference of hrq to ensure we don't perform a null pointer deference. Detected by CoverityScan, CID#1411650 ("Dereference before null check") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
From: Colin Ian King <colin.king@canonical.com> In the NVMET_FCOP_RSP case, sgel is assigned but never used and hence is redundant and can be removed. Detected by CoverityScan, CID#1411658 ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Tomas Jasek authored
This patch shortens every init_timer in lpfc module followed by function and data assignment using setup_timer. This is purely cleanup patch, it does not add new functionality nor remove any existing functionality. An init_timer call in this form: init_timer(&vport->fc_disctmo); vport->fc_disctmo.function = lpfc_disc_timeout; vport->fc_disctmo.data = vport; is shortened to: setup_timer(&vport->fc_disctmo, lpfc_disc_timeout, vport); It increases readability and reduces chances of mistakes done by developers. Signed-off-by: Tomas Jasek <tomsik68@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: <linux-scsi@vger.kernel.org> Acked-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Joe Perches authored
Using %llx for a dma_addr_t can lead to format/argument mismatches. Use %pad and the address of the dma_addr_t instead. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Joe Perches authored
Add __printf compiler verification of format and arguments. Fix fallout. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Christoph Hellwig authored
It returns the number of vectors allocated when successful, so check for a negative error only. Fixes: 2e48e349 ("scsi: vmw_pvscsi: switch to pci_alloc_irq_vectors") Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Loïc Yhuel <loic.yhuel@gmail.com> Tested-by: Loïc Yhuel <loic.yhuel@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Joe Perches authored
Recent printk changes for KERN_CONT cause this logging to be defectively emitted on multiple lines. Fix it. Also reduces object size a trivial amount. $ size drivers/scsi/qla2xxx/qla_dbg.o* text data bss dec hex filename 39125 0 0 39125 98d5 drivers/scsi/qla2xxx/qla_dbg.o.new 39164 0 0 39164 98fc drivers/scsi/qla2xxx/qla_dbg.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
The return status of the adapter check on KERNEL_PANIC is supposed to be the upper 16 bits of the OMR status register. Fixes: c421530b (scsi: aacraid: Reorder Adpater status check) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Arnd Bergmann authored
Without CONFIG_DEBUG_FS, we run into a link error: drivers/scsi/qedi/qedi_iscsi.o: In function `qedi_ep_poll': qedi_iscsi.c:(.text.qedi_ep_poll+0x134): undefined reference to `do_not_recover' drivers/scsi/qedi/qedi_iscsi.o: In function `qedi_ep_disconnect': qedi_iscsi.c:(.text.qedi_ep_disconnect+0x36c): undefined reference to `do_not_recover' drivers/scsi/qedi/qedi_iscsi.o: In function `qedi_ep_connect': qedi_iscsi.c:(.text.qedi_ep_connect+0x350): undefined reference to `do_not_recover' drivers/scsi/qedi/qedi_fw.o: In function `qedi_tmf_work': qedi_fw.c:(.text.qedi_tmf_work+0x3b4): undefined reference to `do_not_recover' This defines the symbol as a constant in this case, as there is no way to set it to anything other than zero without DEBUG_FS. In addition, I'm renaming it to qedi_do_not_recover in order to put it into a driver specific namespace, as "do_not_recover" is a really bad name for a kernel-wide global identifier when it is used only in one driver. Fixes: ace7f46b ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
- 02 Mar, 2017 3 commits
-
-
Bart Van Assche authored
Commit 669f0441 ("scsi: srp_transport: Move queuecommand() wait code to SCSI core") can make scsi_internal_device_block() sleep. However, the mpt3sas driver can call this function from an interrupt handler. Hence add a second argument to scsi_internal_device_block() that restores the old behavior of this function for the mpt3sas handler. The call chain that triggered an "IRQ handler enabled interrupts" complaint is as follows: _base_interrupt() -> _base_async_event() -> mpt3sas_scsih_event_callback() -> _scsih_check_topo_delete_events() -> _scsih_block_io_to_children_attached_directly() -> _scsih_block_io_device() -> _scsih_internal_device_block() -> scsi_internal_device_block() Reported-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Omar Sandoval <osandov@osandov.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Christoph Hellwig <hch@lst.de> Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Chaitra P B <chaitra.basappa@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Cc: <stable@vger.kernel.org> # v4.10+ Tested-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Damien Le Moal authored
Commit <f2e767bb> ("mpt3sas: Force request partial completion alignment") was not considering the case of commands not operating on logical block size units (e.g. REQ_OP_ZONE_REPORT and its 64B aligned partial replies). In this case, forcing alignment of resid to the device logical block size can break the command result, e.g. in the case of REQ_OP_ZONE_REPORT, the exact number of zone reported by the device. Move the partial completion alignement check of mpt3sas to a generic implementation in sd_done(). The check is added within the default section of the initial req_op() switch case so that the report and reset zone commands are ignored. In addition, as sd_done() is not called for passthrough requests, resid corrections are not done as intended by the initial mpt3sas patch. Fixes: f2e767bb ("mpt3sas: Force request partial completion alignment") Cc: <stable@vger.kernel.org> # v4.10 Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Potomski, MichalX authored
Since in UFS 2.1 specification some of the descriptor lengths differs from 2.0 specification and some devices, which are reporting spec version 2.0 have different descriptor lengths we can not rely on hardcoded values taken from 2.0 specification. This patch introduces reading these lengths per each device from descriptor headers at probe time to ensure their correctness. Signed-off-by: Michal' Potomski <michalx.potomski@intel.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-