Hwpoison allows to filter pages by memory cgroup ino.  Currently, it
calls try_get_mem_cgroup_from_page to obtain the cgroup from a page and
then its ino using cgroup_ino, but now we have a helper method for
that, page_cgroup_ino, so use it instead.

This patch also loosens the hwpoison memcg filter dependency rules - it
makes it depend on CONFIG_MEMCG instead of CONFIG_MEMCG_SWAP, because
hwpoison memcg filter does not require anything (nor it used to) from
CONFIG_MEMCG_SWAP side.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patchset introduces a new user API for tracking user memory pages
that have not been used for a given period of time.  The purpose of this
is to provide the userspace with the means of tracking a workload's
working set, i.e.  the set of pages that are actively used by the
workload.  Knowing the working set size can be useful for partitioning the
system more efficiently, e.g.  by tuning memory cgroup limits
appropriately, or for job placement within a compute cluster.

==== USE CASES ====

The unified cgroup hierarchy has memory.low and memory.high knobs, which
are defined as the low and high boundaries for the workload working set
size.  However, the working set size of a workload may be unknown or
change in time.  With this patch set, one can periodically estimate the
amount of memory unused by each cgroup and tune their memory.low and
memory.high parameters accordingly, therefore optimizing the overall
memory utilization.

Another use case is balancing workloads within a compute cluster.  Knowing
how much memory is not really used by a workload unit may help take a more
optimal decision when considering migrating the unit to another node
within the cluster.

Also, as noted by Minchan, this would be useful for per-process reclaim
(https://lwn.net/Articles/545668/). With idle tracking, we could reclaim idle
pages only by smart user memory manager.

==== USER API ====

The user API consists of two new files:

 * /sys/kernel/mm/page_idle/bitmap.  This file implements a bitmap where each
   bit corresponds to a page, indexed by PFN. When the bit is set, the
   corresponding page is idle. A page is considered idle if it has not been
   accessed since it was marked idle. To mark a page idle one should set the
   bit corresponding to the page by writing to the file. A value written to the
   file is OR-ed with the current bitmap value. Only user memory pages can be
   marked idle, for other page types input is silently ignored. Writing to this
   file beyond max PFN results in the ENXIO error. Only available when
   CONFIG_IDLE_PAGE_TRACKING is set.

   This file can be used to estimate the amount of pages that are not
   used by a particular workload as follows:

   1. mark all pages of interest idle by setting corresponding bits in the
      /sys/kernel/mm/page_idle/bitmap
   2. wait until the workload accesses its working set
   3. read /sys/kernel/mm/page_idle/bitmap and count the number of bits set

 * /proc/kpagecgroup.  This file contains a 64-bit inode number of the
   memory cgroup each page is charged to, indexed by PFN. Only available when
   CONFIG_MEMCG is set.

   This file can be used to find all pages (including unmapped file pages)
   accounted to a particular cgroup. Using /sys/kernel/mm/page_idle/bitmap, one
   can then estimate the cgroup working set size.

For an example of using these files for estimating the amount of unused
memory pages per each memory cgroup, please see the script attached
below.

==== REASONING ====

The reason to introduce the new user API instead of using
/proc/PID/{clear_refs,smaps} is that the latter has two serious
drawbacks:

 - it does not count unmapped file pages
 - it affects the reclaimer logic

The new API attempts to overcome them both. For more details on how it
is achieved, please see the comment to patch 6.

==== PATCHSET STRUCTURE ====

The patch set is organized as follows:

 - patch 1 adds page_cgroup_ino() helper for the sake of
   /proc/kpagecgroup and patches 2-3 do related cleanup
 - patch 4 adds /proc/kpagecgroup, which reports cgroup ino each page is
   charged to
 - patch 5 introduces a new mmu notifier callback, clear_young, which is
   a lightweight version of clear_flush_young; it is used in patch 6
 - patch 6 implements the idle page tracking feature, including the
   userspace API, /sys/kernel/mm/page_idle/bitmap
 - patch 7 exports idle flag via /proc/kpageflags

==== SIMILAR WORKS ====

Originally, the patch for tracking idle memory was proposed back in 2011
by Michel Lespinasse (see http://lwn.net/Articles/459269/).  The main
difference between Michel's patch and this one is that Michel implemented
a kernel space daemon for estimating idle memory size per cgroup while
this patch only provides the userspace with the minimal API for doing the
job, leaving the rest up to the userspace.  However, they both share the
same idea of Idle/Young page flags to avoid affecting the reclaimer logic.

==== PERFORMANCE EVALUATION ====

SPECjvm2008 (https://www.spec.org/jvm2008/) was used to evaluate the
performance impact introduced by this patch set.  Three runs were carried
out:

 - base: kernel without the patch
 - patched: patched kernel, the feature is not used
 - patched-active: patched kernel, 1 minute-period daemon is used for
   tracking idle memory

For tracking idle memory, idlememstat utility was used:
https://github.com/locker/idlememstat

testcase            base            patched        patched-active

compiler       537.40 ( 0.00)%   532.26 (-0.96)%   538.31 ( 0.17)%
compress       305.47 ( 0.00)%   301.08 (-1.44)%   300.71 (-1.56)%
crypto         284.32 ( 0.00)%   282.21 (-0.74)%   284.87 ( 0.19)%
derby          411.05 ( 0.00)%   413.44 ( 0.58)%   412.07 ( 0.25)%
mpegaudio      189.96 ( 0.00)%   190.87 ( 0.48)%   189.42 (-0.28)%
scimark.large   46.85 ( 0.00)%    46.41 (-0.94)%    47.83 ( 2.09)%
scimark.small  412.91 ( 0.00)%   415.41 ( 0.61)%   421.17 ( 2.00)%
serial         204.23 ( 0.00)%   213.46 ( 4.52)%   203.17 (-0.52)%
startup         36.76 ( 0.00)%    35.49 (-3.45)%    35.64 (-3.05)%
sunflow        115.34 ( 0.00)%   115.08 (-0.23)%   117.37 ( 1.76)%
xml            620.55 ( 0.00)%   619.95 (-0.10)%   620.39 (-0.03)%

composite      211.50 ( 0.00)%   211.15 (-0.17)%   211.67 ( 0.08)%

time idlememstat:

17.20user 65.16system 2:15:23elapsed 1%CPU (0avgtext+0avgdata 8476maxresident)k
448inputs+40outputs (1major+36052minor)pagefaults 0swaps

==== SCRIPT FOR COUNTING IDLE PAGES PER CGROUP ====
#! /usr/bin/python
#

import os
import stat
import errno
import struct

CGROUP_MOUNT = "/sys/fs/cgroup/memory"
BUFSIZE = 8 * 1024  # must be multiple of 8

def get_hugepage_size():
    with open("/proc/meminfo", "r") as f:
        for s in f:
            k, v = s.split(":")
            if k == "Hugepagesize":
                return int(v.split()[0]) * 1024

PAGE_SIZE = os.sysconf("SC_PAGE_SIZE")
HUGEPAGE_SIZE = get_hugepage_size()

def set_idle():
    f = open("/sys/kernel/mm/page_idle/bitmap", "wb", BUFSIZE)
    while True:
        try:
            f.write(struct.pack("Q", pow(2, 64) - 1))
        except IOError as err:
            if err.errno == errno.ENXIO:
                break
            raise
    f.close()

def count_idle():
    f_flags = open("/proc/kpageflags", "rb", BUFSIZE)
    f_cgroup = open("/proc/kpagecgroup", "rb", BUFSIZE)

    with open("/sys/kernel/mm/page_idle/bitmap", "rb", BUFSIZE) as f:
        while f.read(BUFSIZE): pass  # update idle flag

    idlememsz = {}
    while True:
        s1, s2 = f_flags.read(8), f_cgroup.read(8)
        if not s1 or not s2:
            break

        flags, = struct.unpack('Q', s1)
        cgino, = struct.unpack('Q', s2)

        unevictable = (flags >> 18) & 1
        huge = (flags >> 22) & 1
        idle = (flags >> 25) & 1

        if idle and not unevictable:
            idlememsz[cgino] = idlememsz.get(cgino, 0) + \
                (HUGEPAGE_SIZE if huge else PAGE_SIZE)

    f_flags.close()
    f_cgroup.close()
    return idlememsz

if __name__ == "__main__":
    print "Setting the idle flag for each page..."
    set_idle()

    raw_input("Wait until the workload accesses its working set, "
              "then press Enter")

    print "Counting idle pages..."
    idlememsz = count_idle()

    for dir, subdirs, files in os.walk(CGROUP_MOUNT):
        ino = os.stat(dir)[stat.ST_INO]
        print dir + ": " + str(idlememsz.get(ino, 0) / 1024) + " kB"
==== END SCRIPT ====

This patch (of 8):

Add page_cgroup_ino() helper to memcg.

This function returns the inode number of the closest online ancestor of
the memory cgroup a page is charged to.  It is required for exporting
information about which page is charged to which cgroup to userspace,
which will be introduced by a following patch.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Change the Documentation/vm/zswap.txt doc to indicate that the "zpool" and
"compressor" params are now changeable at runtime.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update the zpool and compressor parameters to be changeable at runtime.
When changed, a new pool is created with the requested zpool/compressor,
and added as the current pool at the front of the pool list.  Previous
pools remain in the list only to remove existing compressed pages from.
The old pool(s) are removed once they become empty.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Acked-by: Seth Jennings <sjennings@variantweb.net>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add dynamic creation of pools.  Move the static crypto compression per-cpu
transforms into each pool.  Add a pointer to zswap_entry to the pool it's
in.

This is required by the following patch which enables changing the zswap
zpool and compressor params at runtime.

[akpm@linux-foundation.org: fix merge snafus]
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Acked-by: Seth Jennings <sjennings@variantweb.net>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This series makes creation of the zpool and compressor dynamic, so that
they can be changed at runtime.  This makes using/configuring zswap
easier, as before this zswap had to be configured at boot time, using boot
params.

This uses a single list to track both the zpool and compressor together,
although Seth had mentioned an alternative which is to track the zpools
and compressors using separate lists.  In the most common case, only a
single zpool and single compressor, using one list is slightly simpler
than using two lists, and for the uncommon case of multiple zpools and/or
compressors, using one list is slightly less simple (and uses slightly
more memory, probably) than using two lists.

This patch (of 4):

Add zpool_has_pool() function, indicating if the specified type of zpool
is available (i.e.  zsmalloc or zbud).  This allows checking if a pool is
available, without actually trying to allocate it, similar to
crypto_has_alg().

This is used by a following patch to zswap that enables the dynamic
runtime creation of zswap zpools.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Acked-by: Seth Jennings <sjennings@variantweb.net>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull inifiniband/rdma updates from Doug Ledford:
 "This is a fairly sizeable set of changes.  I've put them through a
  decent amount of testing prior to sending the pull request due to
  that.

  There are still a few fixups that I know are coming, but I wanted to
  go ahead and get the big, sizable chunk into your hands sooner rather
  than waiting for those last few fixups.

  Of note is the fact that this creates what is intended to be a
  temporary area in the drivers/staging tree specifically for some
  cleanups and additions that are coming for the RDMA stack.  We
  deprecated two drivers (ipath and amso1100) and are waiting to hear
  back if we can deprecate another one (ehca).  We also put Intel's new
  hfi1 driver into this area because it needs to be refactored and a
  transfer library created out of the factored out code, and then it and
  the qib driver and the soft-roce driver should all be modified to use
  that library.

  I expect drivers/staging/rdma to be around for three or four kernel
  releases and then to go away as all of the work is completed and final
  deletions of deprecated drivers are done.

  Summary of changes for 4.3:

   - Create drivers/staging/rdma
   - Move amso1100 driver to staging/rdma and schedule for deletion
   - Move ipath driver to staging/rdma and schedule for deletion
   - Add hfi1 driver to staging/rdma and set TODO for move to regular
     tree
   - Initial support for namespaces to be used on RDMA devices
   - Add RoCE GID table handling to the RDMA core caching code
   - Infrastructure to support handling of devices with differing read
     and write scatter gather capabilities
   - Various iSER updates
   - Kill off unsafe usage of global mr registrations
   - Update SRP driver
   - Misc  mlx4 driver updates
   - Support for the mr_alloc verb
   - Support for a netlink interface between kernel and user space cache
     daemon to speed path record queries and route resolution
   - Ininitial support for safe hot removal of verbs devices"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits)
  IB/ipoib: Suppress warning for send only join failures
  IB/ipoib: Clean up send-only multicast joins
  IB/srp: Fix possible protection fault
  IB/core: Move SM class defines from ib_mad.h to ib_smi.h
  IB/core: Remove unnecessary defines from ib_mad.h
  IB/hfi1: Add PSM2 user space header to header_install
  IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY
  mlx5: Fix incorrect wc pkey_index assignment for GSI messages
  IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow
  IB/uverbs: reject invalid or unknown opcodes
  IB/cxgb4: Fix if statement in pick_local_ip6adddrs
  IB/sa: Fix rdma netlink message flags
  IB/ucma: HW Device hot-removal support
  IB/mlx4_ib: Disassociate support
  IB/uverbs: Enable device removal when there are active user space applications
  IB/uverbs: Explicitly pass ib_dev to uverbs commands
  IB/uverbs: Fix race between ib_uverbs_open and remove_one
  IB/uverbs: Fix reference counting usage of event files
  IB/core: Make ib_dealloc_pd return void
  IB/srp: Create an insecure all physical rkey only if needed
  ...

Pull IPMI updates from Corey Minyard:
 "Most of these have been sitting in linux-next for more than a release,
  particularly commit 0fbcf4af ("ipmi: Convert the IPMI SI ACPI
  handling to a platform device") which is probably the most complex
  patch.

  That is also the one that changes drivers/acpi/acpi_pnp.c.  The change
  in that file is only removing IPMI from a "special platform devices"
  list, since I convert it to the standard PNP interface.  I posted this
  one to the ACPI list twice and got no response, and it seems to work
  well in my testing, so I'm hoping it's good.

  Hidehiro Kawai posted a set of changes that improves the panic time
  handling in the IPMI driver.

  The rest of the changes are minor bug fixes or cleanups and some
  documentation"

* tag 'for-linus-4.3' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi:ssif: Add a module parm to specify that SMBus alerts don't work
  ipmi: add of_device_id in MODULE_DEVICE_TABLE
  ipmi: Compensate for BMCs that wont set the irq enable bit
  ipmi: Don't call receive handler in the panic context
  ipmi: Avoid touching possible corrupted lists in the panic context
  ipmi: Don't flush messages in sender() in run-to-completion mode
  ipmi: Factor out message flushing procedure
  ipmi: Remove unneeded set_run_to_completion call
  ipmi: Make some data const that was only read
  ipmi: constify SSIF ACPI device ids
  ipmi: Delete an unnecessary check before the function call "cleanup_one_si"
  char:ipmi - Change 1 to true for bool type variables during initialization.
  impi:Remove unneeded setting of module owner to THIS_MODULE in the platform structure, powernv_ipmi_driver
  ipmi: Add a comment in how messages are delivered from the lower layer
  ipmi/powernv: Fix potential invalid pointer dereference
  ipmi: Convert the IPMI SI ACPI handling to a platform device
  ipmi: Add device tree bindings information

Merge second patch-bomb from Andrew Morton:
 "Almost all of the rest of MM.  There was an unusually large amount of
  MM material this time"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (141 commits)
  zpool: remove no-op module init/exit
  mm: zbud: constify the zbud_ops
  mm: zpool: constify the zpool_ops
  mm: swap: zswap: maybe_preload & refactoring
  zram: unify error reporting
  zsmalloc: remove null check from destroy_handle_cache()
  zsmalloc: do not take class lock in zs_shrinker_count()
  zsmalloc: use class->pages_per_zspage
  zsmalloc: consider ZS_ALMOST_FULL as migrate source
  zsmalloc: partial page ordering within a fullness_list
  zsmalloc: use shrinker to trigger auto-compaction
  zsmalloc: account the number of compacted pages
  zsmalloc/zram: introduce zs_pool_stats api
  zsmalloc: cosmetic compaction code adjustments
  zsmalloc: introduce zs_can_compact() function
  zsmalloc: always keep per-class stats
  zsmalloc: drop unused variable `nr_to_migrate'
  mm/memblock.c: fix comment in __next_mem_range()
  mm/page_alloc.c: fix type information of memoryless node
  memory-hotplug: fix comments in zone_spanned_pages_in_node() and zone_spanned_pages_in_node()
  ...

Pull parisc updates from Helge Deller:
 "The most important changes in this patchset are:

   - re-enable 64bit PCI bus addresses which were temporarily disabled
     for PA-RISC in kernel 4.2

   - fix the 64bit CAS operation in the LWS path which now enables us to
     enable the 64bit gcc atomic builtins even on 32bit userspace with
     64bit kernel

   - fix a long-standing bug which sometimes crashed kernel at bootup
     while serial interrupt wasn't registered yet"

* 'parisc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Use platform_device_register_simple("rtc-generic")
  parisc: Drop CONFIG_SMP around update_cr16_clocksource()
  parisc: Use double word condition in 64bit CAS operation
  parisc: Filter out spurious interrupts in PA-RISC irq handler
  parisc: Additionally check for in_atomic() in page fault handler
  PCI,parisc: Enable 64-bit bus addresses on PA-RISC
  parisc: Define ioremap_uc and ioremap_wc

Merge tag 'linux-kselftest-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest update from Shuah Khan:
 "This update adds new zram test and fixes to problems found during
  testing this new zram test.  In addition, there are a few bug fixes
  and ksefltest improvement patches from Linaro developers.

  I will send another update later on this week to fix kselftest
  breakage due to commit 2bf9e0ab ("locking/static_keys: Provide a
  selftest") after the fix soaks in next for a couple of days"

* tag 'linux-kselftest-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/zram: Makefile fix
  selftests/zram: must be run as root
  selftests: breakpoints: fix installing error on the architecture except x86
  selftests: check before install
  selftests/zram: Adding zram tests

Pull iommu updates for from Joerg Roedel:
 "This time the IOMMU updates are mostly cleanups or fixes.  No big new
  features or drivers this time.  In particular the changes include:

   - Bigger cleanup of the Domain<->IOMMU data structures and the code
     that manages them in the Intel VT-d driver.  This makes the code
     easier to understand and maintain, and also easier to keep the data
     structures in sync.  It is also a preparation step to make use of
     default domains from the IOMMU core in the Intel VT-d driver.

   - Fixes for a couple of DMA-API misuses in ARM IOMMU drivers, namely
     in the ARM and Tegra SMMU drivers.

   - Fix for a potential buffer overflow in the OMAP iommu driver's
     debug code

   - A couple of smaller fixes and cleanups in various drivers

   - One small new feature: Report domain-id usage in the Intel VT-d
     driver to easier detect bugs where these are leaked"

* tag 'iommu-updates-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (83 commits)
  iommu/vt-d: Really use upper context table when necessary
  x86/vt-d: Fix documentation of DRHD
  iommu/fsl: Really fix init section(s) content
  iommu/io-pgtable-arm: Unmap and free table when overwriting with block
  iommu/io-pgtable-arm: Move init-fn declarations to io-pgtable.h
  iommu/msm: Use BUG_ON instead of if () BUG()
  iommu/vt-d: Access iomem correctly
  iommu/vt-d: Make two functions static
  iommu/vt-d: Use BUG_ON instead of if () BUG()
  iommu/vt-d: Return false instead of 0 in irq_remapping_cap()
  iommu/amd: Use BUG_ON instead of if () BUG()
  iommu/amd: Make a symbol static
  iommu/amd: Simplify allocation in irq_remapping_alloc()
  iommu/tegra-smmu: Parameterize number of TLB lines
  iommu/tegra-smmu: Factor out tegra_smmu_set_pde()
  iommu/tegra-smmu: Extract tegra_smmu_pte_get_use()
  iommu/tegra-smmu: Use __GFP_ZERO to allocate zeroed pages
  iommu/tegra-smmu: Remove PageReserved manipulation
  iommu/tegra-smmu: Convert to use DMA API
  iommu/tegra-smmu: smmu_flush_ptc() wants device addresses
  ...

Pull regmap updates from Mark Brown:
 "This has been a busy release for regmap.

  By far the biggest set of changes here are those from Markus Pargmann
  which implement support for block transfers in smbus devices.  This
  required quite a bit of refactoring but leaves us better able to
  handle odd restrictions that controllers may have and with better
  performance on smbus.

  Other new features include:

   - Fix interactions with lockdep for nested regmaps (eg, when a device
     using regmap is connected to a bus where the bus controller has a
     separate regmap).  Lockdep's default class identification is too
     crude to work without help.

   - Support for must write bitfield operations, useful for operations
     which require writing a bit to trigger them from Kuniori Morimoto.

   - Support for delaying during register patch application from Nariman
     Poushin.

   - Support for overriding cache state via the debugfs implementation
     from Richard Fitzgerald"

* tag 'regmap-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (25 commits)
  regmap: fix a NULL pointer dereference in __regmap_init
  regmap: Support bulk reads for devices without raw formatting
  regmap-i2c: Add smbus i2c block support
  regmap: Add raw_write/read checks for max_raw_write/read sizes
  regmap: regmap max_raw_read/write getter functions
  regmap: Introduce max_raw_read/write for regmap_bulk_read/write
  regmap: Add missing comments about struct regmap_bus
  regmap: No multi_write support if bus->write does not exist
  regmap: Split use_single_rw internally into use_single_read/write
  regmap: Fix regmap_bulk_write for bus writes
  regmap: regmap_raw_read return error on !bus->read
  regulator: core: Print at debug level on debugfs creation failure
  regmap: Fix regmap_can_raw_write check
  regmap: fix typos in regmap.c
  regmap: Fix integertypes for register address and value
  regmap: Move documentation to regmap.h
  regmap: Use different lockdep class for each regmap init call
  thermal: sti: Add parentheses around bridge->ops->regmap_init call
  mfd: vexpress: Add parentheses around bridge->ops->regmap_init call
  regmap: debugfs: Fix misuse of IS_ENABLED
  ...

Pull fbdev updates from Tomi Valkeinen:
 "Minor fixes and cleanups"

* tag 'fbdev-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  video: fbdev: atmel_lcdfb: remove useless include
  video: fbdev: pxa168fb: Use devm_clk_get
  fbdev: ssd1307fb: fix error return code
  fbdev: fix snprintf() limit in show_bl_curve()
  video: fbdev: s3c-fb: Constify platform_device_id
  video: fbdev: atmel: fix warning for const return value
  video: fbdev: Drop owner assignment from platform_driver
  video: fbdev: Drop owner assignment from i2c_driver
  fbdev: remove unnecessary memset in vfb
  framebuffer: disable vgacon on microblaze arch
  fbdev: udlfb: remove unneeded initialization in few places
  fbdev: Allow compile test of GPIO consumers if !GPIOLIB
  fbdev: fix cea_modes array size

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Fix a race condition in the request handling
   - Skip trim commands for some buggy kingston eMMCs
   - An optimization and a correction for erase groups
   - Set CMD23 quirk for some Sandisk cards

  MMC host:
   - sdhci: Give GPIO CD higher precedence and don't poll when it's used
   - sdhci: Fix DMA memory leakage
   - sdhci: Some updates for clock management
   - sdhci-of-at91: introduce driver for the Atmel SDMMC
   - sdhci-of-arasan: Add support for sdhci-5.1
   - sdhci-esdhc-imx: Add support for imx7d which also supports HS400
   - sdhci: A collection of fixes and improvements for various sdhci hosts
   - omap_hsmmc: Modernization of the regulator code
   - dw_mmc: A couple of fixes for DMA and PIO mode
   - usdhi6rol0: A few fixes and support probe deferral for regulators
   - pxamci: Convert to use dmaengine
   - sh_mmcif: Fix the suspend process in a short term solution
   - tmio: Adjust timeout for commands
   - sunxi: Fix timeout while gating/ungating clock"

* tag 'mmc-v4.3' of git://git.linaro.org/people/ulf.hansson/mmc: (67 commits)
  mmc: android-goldfish: remove incorrect __iomem annotation
  mmc: core: fix race condition in mmc_wait_data_done
  mmc: host: omap_hsmmc: remove CONFIG_REGULATOR check
  mmc: host: omap_hsmmc: use ios->vdd for setting vmmc voltage
  mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status
  mmc: host: omap_hsmmc: enable/disable vmmc_aux regulator based on previous state
  mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator state
  mmc: host: omap_hsmmc: avoid pbias regulator enable on power off
  mmc: host: omap_hsmmc: add separate function to set pbias
  mmc: host: omap_hsmmc: add separate functions for enable/disable supply
  mmc: host: omap_hsmmc: return error if any of the regulator APIs fail
  mmc: host: omap_hsmmc: remove unnecessary pbias set_voltage
  mmc: host: omap_hsmmc: use mmc_host's vmmc and vqmmc
  mmc: host: omap_hsmmc: use the ocrmask provided by the vmmc regulator
  mmc: host: omap_hsmmc: cleanup omap_hsmmc_reg_get()
  mmc: host: omap_hsmmc: return on fatal errors from omap_hsmmc_reg_get
  mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc
  mmc: sdhci-of-at91: fix platform_no_drv_owner.cocci warnings
  mmc: sh_mmcif: Fix suspend process
  mmc: usdhi6rol0: fix error return code
  ...

Merge tag 'platform-drivers-x86-v4.3-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:
 "Significant work on toshiba_acpi, including new hardware support,
  refactoring, and cleanups.  Extend device support for asus, ideapad,
  and acer systems.  New surface pro 3 buttons driver.  Misc minor
  cleanups for thinkpad and hp-wireless.

  acer-wmi:
   - No rfkill on HP Omen 15 wifi

  thinkpad_acpi:
   - Remove side effects from vdbg_printk -> no_printk macro

  surface pro 3:
   - Add support driver for Surface Pro 3 buttons

  hp-wireless:
   - remove unneeded goto/label in hpwl_init

  ideapad-laptop:
   - add alternative representation for Yoga 2 to DMI table
   - Add Lenovo Yoga 3 14 to no_hw_rfkill dmi list

  asus-laptop:
   - Add key found on Asus F3M

  MAINTAINERS:
   - Remove Toshiba Linux mailing list address

  toshiba_acpi:
   - Bump driver version to 0.23
   - Remove unnecessary checks and returns in HCI/SCI functions
   - Refactor *{get, set} functions return value
   - Remove "*not supported" feature prints
   - Change *available functions return type
   - Add set_fan_status function
   - Change some variables to avoid warnings from ninja-check
   - Reorder toshiba_acpi_alt_keymap entries
   - Remove unused wireless defines
   - Transflective backlight updates
   - Avoid registering input device on WMI event laptops
   - Add /dev/toshiba_acpi device
   - Adapt /proc/acpi/toshiba/keys to TOS1900 devices"

* tag 'platform-drivers-x86-v4.3-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (21 commits)
  acer-wmi: No rfkill on HP Omen 15 wifi
  thinkpad_acpi: Remove side effects from vdbg_printk -> no_printk macro
  surface pro 3: Add support driver for Surface Pro 3 buttons
  hp-wireless: remove unneeded goto/label in hpwl_init
  ideapad-laptop: add alternative representation for Yoga 2 to DMI table
  asus-laptop: Add key found on Asus F3M
  MAINTAINERS: Remove Toshiba Linux mailing list address
  ideapad-laptop: Add Lenovo Yoga 3 14 to no_hw_rfkill dmi list
  toshiba_acpi: Bump driver version to 0.23
  toshiba_acpi: Remove unnecessary checks and returns in HCI/SCI functions
  toshiba_acpi: Refactor *{get, set} functions return value
  toshiba_acpi: Remove "*not supported" feature prints
  toshiba_acpi: Change *available functions return type
  toshiba_acpi: Add set_fan_status function
  toshiba_acpi: Change some variables to avoid warnings from ninja-check
  toshiba_acpi: Reorder toshiba_acpi_alt_keymap entries
  toshiba_acpi: Remove unused wireless defines
  toshiba_acpi: Transflective backlight updates
  toshiba_acpi: Avoid registering input device on WMI event laptops
  toshiba_acpi: Add /dev/toshiba_acpi device
  ...

Pull i2c updates from Wolfram Sang:
 "Features:

   - new drivers: Renesas EMEV2, register based MUX, NXP LPC2xxx
   - core: scans DT and assigns wakeup interrupts.  no driver changes needed.
   - core: some refcouting issues fixed and better API for that
   - core: new helper function for best effort block read emulation
   - slave framework: proper DT bindings and userspace instantiation
   - some bigger work for xiic, pxa, omap drivers

  .. and quite a number of smaller driver fixes, cleanups, improvements"

* 'i2c/for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (65 commits)
  i2c: mux: reg Change ioread endianness for readback
  i2c: mux: reg: fix compilation warnings
  i2c: mux: reg: simplify register size checking
  i2c: muxes: fix leaked i2c adapter device node references
  i2c: allow specifying separate wakeup interrupt in device tree
  of/irq: export of_get_irq_byname()
  i2c: xgene-slimpro: dma_mapping_error() doesn't return an error code
  i2c: Replace I2C_CROS_EC_TUNNEL dependency
  eeprom: at24: use i2c_smbus_read_i2c_block_data_or_emulated
  i2c: core: Add support for best effort block read emulation
  i2c: lpc2k: add driver
  i2c: mux: Add register-based mux i2c-mux-reg
  i2c: dt: describe generic bindings
  i2c: slave: print warning if slave flag not set
  i2c: support 10 bit and slave addresses in sysfs 'new_device'
  i2c: take address space into account when checking for used addresses
  i2c: apply DT flags when probing
  i2c: make address check indpendent from client struct
  i2c: rename address check functions
  i2c: apply address offset for slaves, too
  ...

Pull RTC updates from Alexandre Belloni:
 "Core:
   - use is_visible() to control sysfs attributes
   - switch wakealarm attribute to DEVICE_ATTR_RW
   - make rtc_does_wakealarm() return boolean
   - properly manage lifetime of dev and cdev in rtc device
   - remove unnecessary device_get() in rtc_device_unregister
   - fix double free in rtc_register_device() error path

  New drivers:
   - NXP LPC24xx
   - Xilinx Zynq MP
   - Dialog DA9062

  Subsystem wide cleanups:
   - fix drivers that consider 0 as a valid IRQ in client->irq
   - Drop (un)likely before IS_ERR(_OR_NULL)
   - drop the remaining owner assignment for i2c_driver and
     platform_driver
   - module autoload fixes

  Drivers:
   - 88pm80x: add device tree support
   - abx80x: fix RTC write bit
   - ab8500: Add a sentinel to ab85xx_rtc_ids[]
   - armada38x: Align RTC set time procedure with the official errata
   - as3722: correct month value
   - at91sam9: cleanups
   - at91rm9200: get and use slow clock and cleanups
   - bq32k: remove redundant check
   - cmos: century support, proper fix for the spurious wakeup
   - ds1307: cleanups and wakeup irq support
   - ds1374: Remove unused variable
   - ds1685: Use module_platform_driver
   - ds3232: fix WARNING trace in resume function
   - gemini: fix ptr_ret.cocci warnings
   - mt6397: implement suspend/resume
   - omap: support internal and external clock enabling
   - opal: Enable alarms only when opal supports tpo
   - pcf2127: use OFS flag to detect unreliable date and warn the user
   - pl031: fix typo for author email
   - rx8025: huge cleanup and fixes
   - sa1100/pxa: share common code
   - s5m: fix to update ctrl register
   - s3c: fix clocks and wakeup, cleanup
   - sirfsoc: use regmap
   - nvram_read()/nvram_write() functions for cmos, ds1305, ds1307,
     ds1343, ds1511, ds1553, ds1742, m48t59, rp5c01, stk17ta8, tx4939
   - use rtc_valid_tm() error code when reading date/time instead of 0
     for isl12022, pcf2123, pcf2127"

* tag 'rtc-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (90 commits)
  rtc: abx80x: fix RTC write bit
  rtc: ab8500: Add a sentinel to ab85xx_rtc_ids[]
  rtc: ds1374: Remove unused variable
  rtc: Fix module autoload for OF platform drivers
  rtc: Fix module autoload for rtc-{ab8500,max8997,s5m} drivers
  rtc: omap: Add external clock enabling support
  rtc: omap: Add internal clock enabling support
  ARM: dts: AM437x: Add the internal and external clock nodes for rtc
  rtc: s5m: fix to update ctrl register
  rtc: add xilinx zynqmp rtc driver
  devicetree: bindings: rtc: add bindings for xilinx zynqmp rtc
  rtc: as3722: correct month value
  ARM: config: Switch PXA27x platforms to use PXA RTC driver
  ARM: mmp: remove unused RTC register definitions
  ARM: sa1100: remove unused RTC register definitions
  rtc: sa1100/pxa: convert to run-time register mapping
  ARM: pxa: add memory resource to SA1100 RTC device
  rtc: pxa: convert to use shared sa1100 functions
  rtc: sa1100: prepare to share sa1100_rtc_ops
  rtc: ds3232: fix WARNING trace in resume function
  ...

Remove zpool_init() and zpool_exit(); they do nothing other than print
"loaded" and "unloaded".
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The structure zbud_ops is not modified so make the pointer to it a
pointer to const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The structure zpool_ops is not modified so make the pointer to it a
pointer to const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zswap_get_swap_cache_page and read_swap_cache_async have pretty much the
same code with only significant difference in return value and usage of
swap_readpage.

I a helper __read_swap_cache_async() with the common code.  Behavior
change: now zswap_get_swap_cache_page will use radix_tree_maybe_preload
instead radix_tree_preload.  Looks like, this wasn't changed only by the
reason of code duplication.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make zram syslog error reporting more consistent. We have random
error levels in some places. For example, critical errors like
  "Error allocating memory for compressed page"
and
  "Unable to allocate temp memory"
are reported as KERN_INFO messages.

a) Reassign error levels

Error messages that directly affect zram
functionality -- pr_err():

 Error allocating zram address table
 Error creating memory pool
 Decompression failed! err=%d, page=%u
 Unable to allocate temp memory
 Compression failed! err=%d
 Error allocating memory for compressed page: %u, size=%zu
 Cannot initialise %s compressing backend
 Error allocating disk queue for device %d
 Error allocating disk structure for device %d
 Error creating sysfs group for device %d
 Unable to register zram-control class
 Unable to get major number

Messages that do not affect functionality, but user
must be warned (because sysfs attrs will be removed in
this particular case) -- pr_warn():

 %d (%s) Attribute %s (and others) will be removed. %s

Messages that do not affect functionality and mostly are
informative -- pr_info():

 Cannot change max compression streams
 Can't change algorithm for initialized device
 Cannot change disksize for initialized device
 Added device: %s
 Removed device: %s

b) Update sysfs_create_group() error message

First, it lacks a trailing new line; add it.  Second, every error message
in zram_add() has a "for device %d" part, which makes errors more
informative.  Add missing part to "Error creating sysfs group" message.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We can pass a NULL cache pointer to kmem_cache_destroy(), because it
NULL-checks its argument now.  Remove redundant test from
destroy_handle_cache().
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We can avoid taking class ->lock around zs_can_compact() in
zs_shrinker_count(), because the number that we return back is outdated
in general case, by design.  We have different sources that are able to
change class's state right after we return from zs_can_compact() --
ongoing I/O operations, manually triggered compaction, or two of them
happening simultaneously.

We re-do this calculations during compaction on a per class basis
anyway.

zs_unregister_shrinker() will not return until we have an active
shrinker, so classes won't unexpectedly disappear while
zs_shrinker_count() iterates them.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is no need to recalcurate pages_per_zspage in runtime.  Just use
class->pages_per_zspage to avoid unnecessary runtime overhead.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is no reason to prevent select ZS_ALMOST_FULL as migration source
if we cannot find source from ZS_ALMOST_EMPTY.

With this patch, zs_can_compact will return more exact result.
Signed-off-by: Minchan Kim <minchan.kim@lge.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We want to see more ZS_FULL pages and less ZS_ALMOST_{FULL, EMPTY}
pages.  Put a page with higher ->inuse count first within its
->fullness_list, which will give us better chances to fill up this page
with new objects (find_get_zspage() return ->fullness_list head for new
object allocation), so some zspages will become ZS_ALMOST_FULL/ZS_FULL
quicker.

It performs a trivial and cheap ->inuse compare which does not slow down
zsmalloc and in the worst case keeps the list pages in no particular
order.

A more expensive solution could sort fullness_list by ->inuse count.

[minchan@kernel.org: code adjustments]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Perform automatic pool compaction by a shrinker when system is getting
tight on memory.

User-space has a very little knowledge regarding zsmalloc fragmentation
and basically has no mechanism to tell whether compaction will result in
any memory gain.  Another issue is that user space is not always aware
of the fact that system is getting tight on memory.  Which leads to very
uncomfortable scenarios when user space may start issuing compaction
'randomly' or from crontab (for example).  Fragmentation is not always
necessarily bad, allocated and unused objects, after all, may be filled
with the data later, w/o the need of allocating a new zspage.  On the
other hand, we obviously don't want to waste memory when the system
needs it.

Compaction now has a relatively quick pool scan so we are able to
estimate the number of pages that will be freed easily, which makes it
possible to call this function from a shrinker->count_objects()
callback.  We also abort compaction as soon as we detect that we can't
free any pages any more, preventing wasteful objects migrations.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Suggested-by: Minchan Kim <minchan@kernel.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Compaction returns back to zram the number of migrated objects, which is
quite uninformative -- we have objects of different sizes so user space
cannot obtain any valuable data from that number.  Change compaction to
operate in terms of pages and return back to compaction issuer the
number of pages that were freed during compaction.  So from now on we
will export more meaningful value in zram<id>/mm_stat -- the number of
freed (compacted) pages.

This requires:
 (a) a rename of `num_migrated' to 'pages_compacted'
 (b) a internal API change -- return first_page's fullness_group from
     putback_zspage(), so we know when putback_zspage() did
     free_zspage().  It helps us to account compaction stats correctly.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

`zs_compact_control' accounts the number of migrated objects but it has
a limited lifespan -- we lose it as soon as zs_compaction() returns back
to zram.  It worked fine, because (a) zram had it's own counter of
migrated objects and (b) only zram could trigger compaction.  However,
this does not work for automatic pool compaction (not issued by zram).
To account objects migrated during auto-compaction (issued by the
shrinker) we need to store this number in zs_pool.

Define a new `struct zs_pool_stats' structure to keep zs_pool's stats
there.  It provides only `num_migrated', as of this writing, but it
surely can be extended.

A new zsmalloc zs_pool_stats() symbol exports zs_pool's stats back to
caller.

Use zs_pool_stats() in zram and remove `num_migrated' from zram_stats.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Suggested-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Change zs_object_copy() argument order to be (DST, SRC) rather than
(SRC, DST).  copy/move functions usually have (to, from) arguments
order.

Rename alloc_target_page() to isolate_target_page().  This function
doesn't allocate anything, it isolates target page, pretty much like
isolate_source_page().

Tweak __zs_compact() comment.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This function checks if class compaction will free any pages.
Rephrasing -- do we have enough unused objects to form at least one
ZS_EMPTY page and free it.  It aborts compaction if class compaction
will not result in any (further) savings.

EXAMPLE (this debug output is not part of this patch set):

 - class size
 - number of allocated objects
 - number of used objects
 - max objects per zspage
 - pages per zspage
 - estimated number of pages that will be freed

[..]
class-512 objs:544 inuse:540 maxobj-per-zspage:8  pages-per-zspage:1 zspages-to-free:0
 ... class-512 compaction is useless. break
class-496 objs:660 inuse:570 maxobj-per-zspage:33 pages-per-zspage:4 zspages-to-free:2
class-496 objs:627 inuse:570 maxobj-per-zspage:33 pages-per-zspage:4 zspages-to-free:1
class-496 objs:594 inuse:570 maxobj-per-zspage:33 pages-per-zspage:4 zspages-to-free:0
 ... class-496 compaction is useless. break
class-448 objs:657 inuse:617 maxobj-per-zspage:9  pages-per-zspage:1 zspages-to-free:4
class-448 objs:648 inuse:617 maxobj-per-zspage:9  pages-per-zspage:1 zspages-to-free:3
class-448 objs:639 inuse:617 maxobj-per-zspage:9  pages-per-zspage:1 zspages-to-free:2
class-448 objs:630 inuse:617 maxobj-per-zspage:9  pages-per-zspage:1 zspages-to-free:1
class-448 objs:621 inuse:617 maxobj-per-zspage:9  pages-per-zspage:1 zspages-to-free:0
 ... class-448 compaction is useless. break
class-432 objs:728 inuse:685 maxobj-per-zspage:28 pages-per-zspage:3 zspages-to-free:1
class-432 objs:700 inuse:685 maxobj-per-zspage:28 pages-per-zspage:3 zspages-to-free:0
 ... class-432 compaction is useless. break
class-416 objs:819 inuse:705 maxobj-per-zspage:39 pages-per-zspage:4 zspages-to-free:2
class-416 objs:780 inuse:705 maxobj-per-zspage:39 pages-per-zspage:4 zspages-to-free:1
class-416 objs:741 inuse:705 maxobj-per-zspage:39 pages-per-zspage:4 zspages-to-free:0
 ... class-416 compaction is useless. break
class-400 objs:690 inuse:674 maxobj-per-zspage:10 pages-per-zspage:1 zspages-to-free:1
class-400 objs:680 inuse:674 maxobj-per-zspage:10 pages-per-zspage:1 zspages-to-free:0
 ... class-400 compaction is useless. break
class-384 objs:736 inuse:709 maxobj-per-zspage:32 pages-per-zspage:3 zspages-to-free:0
 ... class-384 compaction is useless. break
[..]

Every "compaction is useless" indicates that we saved CPU cycles.

class-512 has
	544	object allocated
	540	objects used
	8	objects per-page

Even if we have a ALMOST_EMPTY zspage, we still don't have enough room to
migrate all of its objects and free this zspage; so compaction will not
make a lot of sense, it's better to just leave it as is.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Always account per-class `zs_size_stat' stats.  This data will help us
make better decisions during compaction.  We are especially interested
in OBJ_ALLOCATED and OBJ_USED, which can tell us if class compaction
will result in any memory gain.

For instance, we know the number of allocated objects in the class, the
number of objects being used (so we also know how many objects are not
used) and the number of objects per-page.  So we can ensure if we have
enough unused objects to form at least one ZS_EMPTY zspage during
compaction.

We calculate this value on per-class basis so we can calculate a total
number of zspages that can be released.  Which is exactly what a
shrinker wants to know.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patchset tweaks compaction and makes it possible to trigger pool
compaction automatically when system is getting low on memory.

zsmalloc in some cases can suffer from a notable fragmentation and
compaction can release some considerable amount of memory.  The problem
here is that currently we fully rely on user space to perform compaction
when needed.  However, performing zsmalloc compaction is not always an
obvious thing to do.  For example, suppose we have a `idle' fragmented
(compaction was never performed) zram device and system is getting low
on memory due to some 3rd party user processes (gcc LTO, or firefox,
etc.).  It's quite unlikely that user space will issue zpool compaction
in this case.  Besides, user space cannot tell for sure how badly pool
is fragmented; however, this info is known to zsmalloc and, hence, to a
shrinker.

This patch (of 7):

__zs_compact() does not use `nr_to_migrate', drop it.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For a memoryless node, the output of get_pfn_range_for_nid are all zero.
It will display mem from 0 to -1.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When hot adding a node from add_memory(), we will add memblock first, so
the node is not empty.  But when called from cpu_up(), the node should
be empty.
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>\
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We use sysctl_lowmem_reserve_ratio rather than
sysctl_lower_zone_reserve_ratio to determine how aggressive the kernel
is in defending lowmem from the possibility of being captured into
pinned user memory.  To avoid misleading, correct it in some comments.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The comment says that the per-cpu batchsize and zone watermarks are
determined by present_pages which is definitely wrong, they are both
calculated from managed_pages.  Fix it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>