- 28 Mar, 2013 10 commits
-
-
Lars Ellenberg authored
We forgot to free the disk_conf, so for each attach/detach cycle we leaked 336 bytes. Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Lars Ellenberg authored
We completed empty flushes (blkdev_issue_flush()) with IO error if we lost the local disk, even if we still have an established replication link to a healthy remote disk. Fix this to only report errors to upper layers, if neither local nor remote data is reachable. Signed-off-by:
-
Philipp Reisner authored
The issue was that if the connection broke while we did the gracefull state change to C_DISCONNECTING (C_TEARDOWN), then we returned a success code from the state engine. (SS_CW_NO_NEED) The result of that is that we missed to call the fence-peer script in such a case. Fixed that by introducing a new error code (SS_OUTDATE_WO_CONN). This one should never reach back into user space. Signed-off-by:
-
Philipp Reisner authored
Introduced in drbd: always write bitmap on detach, the bitmap bulk writeout on detach was indicating it expected exclusive bitmap access. Where I meant to say: expect no more modifications, but testing/counting is still allowed. Signed-off-by:
-
Philipp Reisner authored
Patch best viewed with git diff --ignore-space-change. Now that we attempt the fallback to local bitmap operation only when disconnected, we can safely drop the extra "silent" state request from both invalidate and invalidate-remote. Signed-off-by:
-
Philipp Reisner authored
Since commit drbd: Disallow the peer_disk_state to be D_OUTDATED while connected trying to invalidate a disconnected Primary returned an error code that did not really match the situation: "Refusing to be Outdated while Connected" Insert two more specific conditions into is_valid_state(), changing that to "Need access to UpToDate data", respectively "Need a connection to start verify or resync". Signed-off-by:
-
Philipp Reisner authored
To avoid other state change requests, after passing through sanitize_state(), to be mistaken for an invalidate, move the "set all bits as out-of-sync" into the invalidate path. Make invalidate and invalidate-remote behave consistently wrt. current connection state (need either an established replication link, or really be disconnected). Also mention that in the documentation. Signed-off-by:
-
Philipp Reisner authored
We've seen a spurious full resync, because a connection breakage raced with drbd_start_resync(, C_SYNC_TARGET), and the resulting state change request intended to start the resync ended up looking like a local invalidate. Fix: Double check the state inside the lock, and don't even request that state change, if we had connection or IO problems. Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
George Spelvin authored
And some manual common subexpression elimination which may help the compiler produce smaller code. Signed-off-by:
George Spelvin <linux@horizon.com> Signed-off-by:
-
- 26 Mar, 2013 1 commit
-
-
Kent Overstreet authored
Commit 82a84eaf7e51ba3da0c36cbc401034a4e943492d left a return 0 in closure_debug_init(). Whoops. Signed-off-by:
Kent Overstreet <koverstreet@google.com> Signed-off-by:
-
- 25 Mar, 2013 4 commits
-
-
Jens Axboe authored
Less error prone if we just kill it, it's only used once anyway. Signed-off-by: -
Kent Overstreet authored
Took out some nested functions, and fixed some more checkpatch complaints. Signed-off-by:
-
Kent Overstreet authored
config: make ARCH=i386 allmodconfig All error/warnings: drivers/md/bcache/bset.c: In function 'bch_ptr_bad': >> drivers/md/bcache/bset.c:164:2: warning: format '%li' expects argument of type 'long int', but argument 4 has type 'size_t' [-Wformat] -- drivers/md/bcache/debug.c: In function 'bch_pbtree': >> drivers/md/bcache/debug.c:86:4: warning: format '%li' expects argument of type 'long int', but argument 4 has type 'size_t' [-Wformat] -- drivers/md/bcache/btree.c: In function 'bch_btree_read_done': >> drivers/md/bcache/btree.c:245:8: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' [-Wformat] -- drivers/md/bcache/closure.o: In function `closure_debug_init': >> (.init.text+0x0): multiple definition of `init_module' >> drivers/md/bcache/super.o:super.c:(.init.text+0x0): first defined here Signed-off-by:
-
Jens Axboe authored
Merge branch 'bcache-for-upstream' of http://evilpiepirate.org/git/linux-bcache into for-3.10/drivers
-
- 23 Mar, 2013 23 commits
-
-
Kent Overstreet authored
Does writethrough and writeback caching, handles unclean shutdown, and has a bunch of other nifty features motivated by real world usage. See the wiki at http://bcache.evilpiepirate.org for more. Signed-off-by:
-
Kent Overstreet authored
Hack, but bcache needs a way around lockdep for locking during garbage collection - we need to keep multiple btree nodes locked for coalescing and rw_lock_nested() isn't really sufficient or appropriate here. Signed-off-by: -
Kent Overstreet authored
Exported so it can be used by bcache's tracepoints Signed-off-by: -
Kent Overstreet authored
Needed for bcache - need a cheap source of random numbers for perturbing IO sizes, for rate limiting IO to the SSD. Signed-off-by: -
Kent Overstreet authored
This reverts commit 11b80f45. Bcache needs rw semaphores for cache coherency in writeback mode - writes have to take a read lock on a per cache device rw sem, and release it when the bio completes. But since this is for bios it's naturally not in the context of the process that originally took the lock. Signed-off-by:
-
Lars Ellenberg authored
Now that the on-disk activity-log ring buffer size is adjustable, the maximum active set can become larger, and is now limited by the use of 16bit "labels". This increases the maximum working set from 6433 to 65534 extents, each of which covers an area of 4MiB. Which means that if you use the maximum, you'd have to resync more than 250 GiB after an unclean Primary shutdown. With capable backend storage and replication links, this is entirely feasible. Signed-off-by:
-
Lars Ellenberg authored
There may have been more incoming requests while we where preparing the current transaction. Try to consolidate more updates into this transaction until we make no more progres. Signed-off-by:
-
Lars Ellenberg authored
The IO accounting of the drbd "queue depth" was misleading. We only started IO accounting once we already wrote the activity log. Signed-off-by:
-
Lars Ellenberg authored
Depending on current IO depth, try to consolidate as many updates as possible into one activity log transaction. Signed-off-by:
-
Lars Ellenberg authored
New helper to be able to consolidate more updates into a single transaction. Without this, we can only grab a single refcount on an updated element while preparing a transaction. lc_get_cumulative - like lc_get; also finds to-be-changed elements @lc: the lru cache to operate on @enr: the label to look up Unlike lc_get this also returns the element for @enr, if it is belonging to a pending transaction, so the return values are like for lc_get(), plus: pointer to an element already on the "to_be_changed" list. In this case, the cache was already marked %LC_DIRTY. Caller needs to make sure that the pending transaction is completed, before proceeding to actually use this element. Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
To make the code easier to follow, use an explicit find_active_resync_extent(), and add a "nonblock" parameter to _al_get(). Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
This is in preparation to be able to defer requests that need to wait for an activity log transaction to a submitter workqueue. Signed-off-by:
-
Lars Ellenberg authored
A request hitting an already "hot" extent should proceed right away, even if some other requests need to wait for pending transactions. Without that short-circuit, several simultaneous make_request contexts race for committing the transaction, possibly penalizing the innocent. Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
We used to calculate all on-disk meta data offsets, and then compare the stored offsets, basically treating them as magic numbers. Now with the activity log striping, the activity log size is no longer fixed. We need to first read the super block, then base the activity log and bitmap offsets on the stored offsets/al stripe settings. Signed-off-by:
-
Lars Ellenberg authored
Make it obvious that this value is in units of 512 Byte sectors. Signed-off-by:
-
Lars Ellenberg authored
Now we have the cached meta_dev_idx member, we can get rid of a few rcu_read_lock() sections and rcu_dereference(). Signed-off-by:
-
Lars Ellenberg authored
Introduce two new on-disk meta data fields: al_stripes and al_stripe_size_4k The intended use case is activity log on RAID 0 or similar. Logically consecutive transactions will advance their on-disk position by al_stripe_size_4k 4kB (transaction sized) blocks. Right now, these are still asserted to be the backward compatible values al_stripes = 1, al_stripe_size_4k = 8 (which amounts to 32kB). Also introduce a caching member for meta_dev_idx in the in-core structure: even though it is initially passed in in the rcu-protected disk_conf structure, it cannot change without a detach/attach cycle. Signed-off-by:
-
Lars Ellenberg authored
Add a comment about our meta data layout variants, and rename a few defines (e.g. MD_RESERVED_SECT -> MD_128MB_SECT) to make it clear that they are short hand for fixed constants, and not arbitrarily to be redefined as one may see fit. Properly pad struct meta_data_on_disk to 4kB, and initialize to zero not only the first 512 Byte, but all of it in drbd_md_sync(). Signed-off-by:
-
Lars Ellenberg authored
This fixes ASSERT( mdev->state.disk == D_FAILED ) in drivers/block/drbd/drbd_main.c When we detach from local disk, we let the local refcount hit zero twice. First, we transition to D_FAILED, so we won't give out new references to incoming requests; we still may give out *internal* references, though. Once the refcount hits zero [1] while in D_FAILED, we queue a transition to D_DISKLESS to our worker. We need to queue it, because we may be in atomic context when putting the reference. Once the transition to D_DISKLESS actually happened [2] from worker context, we don't give out new internal references either. Between hitting zero the first time [1] and actually transition to D_DISKLESS [2], there may be a few very short lived internal get/put, so we may hit zero more than once while being in D_FAILED, or even see a race where a an internal get_ldev() happened while D_FAILED, but the corresponding put_ldev() happens just after the transition to D_DISKLESS. That's why we have the additional test_and_set_bit(GO_DISKLESS,); and that's why the assert was placed wrong. Since there was exactly one code path left to drbd_go_diskless(), and that checks already for D_FAILED, drop that assert, and fold in the drbd_queue_work(). Signed-off-by:
-
- 17 Mar, 2013 2 commits
-
-
Linus Torvalds authored
-
David Rientjes authored
Commit 1d9d8639 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") introduces a link failure since perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL: arch/x86/power/built-in.o: In function `restore_processor_state': (.text+0x45c): undefined reference to `perf_restore_debug_store' Fix it by defining the dummy function appropriately. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
