- 05 Sep, 2019 22 commits
-
-
Gao Xiang authored
As Christoph pointed out [1], " Why is there __submit_bio which really just obsfucates what is going on? Also why is __submit_bio using bio_set_op_attrs instead of opencode it as the comment right next to it asks you to? " Let's use submit_bio directly instead. [1] https://lore.kernel.org/r/20190830162812.GA10694@infradead.org/Reported-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Link: https://lore.kernel.org/r/20190904020912.63925-18-gaoxiang25@huawei.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gao Xiang authored
As Christoph pointed out [1], "Why is there __erofs_get_meta_page with the two weird booleans instead of a single erofs_get_meta_page that gets and gfp_t for additional flags and an unsigned int for additional bio op flags." And since all callers can handle errors, let's kill prio and nofail and erofs_get_inline_page() now. [1] https://lore.kernel.org/r/20190830162812.GA10694@infradead.org/Reported-by:
-
Gao Xiang authored
As Christoph pointed out [1], "erofs_grab_bio tries to handle a bio_alloc failure, except that the function will not actually fail due the mempool backing it." Sorry about useless code, fix it now and localize erofs_grab_bio [2]. [1] https://lore.kernel.org/r/20190830162812.GA10694@infradead.org/ [2] https://lore.kernel.org/r/20190902122016.GL15931@infradead.org/Reported-by:
-
Gao Xiang authored
As Christoph said [1], "That is some very verbose debug info. We usually don't add that and let people trace the function instead. " [1] https://lore.kernel.org/r/20190829101545.GC20598@infradead.org/Reported-by:
-
Gao Xiang authored
As Christoph pointed out [1], "Why is the variable name for the on-disk subperblock layout? We usually still calls this something with sb in the name, e.g. dsb. for disksuper block. " Let's fix it. [1] https://lore.kernel.org/r/20190829101545.GC20598@infradead.org/Signed-off-by:
-
Gao Xiang authored
Fix as Christoph suggested [1] [2], "remove is_inode_fast_symlink and just opencode it in the few places using it" and "Please just set the ops directly instead of obsfucating that in a single caller, single line inline function. And please set it instead of the normal symlink iops in the same place where you also set those." [1] https://lore.kernel.org/r/20190830163910.GB29603@infradead.org/ [2] https://lore.kernel.org/r/20190829102426.GE20598@infradead.org/Reported-by:
-
Gao Xiang authored
As Christoph suggested [1], update them all. [1] https://lore.kernel.org/r/20190829102426.GE20598@infradead.org/Reported-by:
-
Gao Xiang authored
As Christoph said [1] [2], update it now. [1] https://lore.kernel.org/r/20190902124521.GA22153@infradead.org/ [2] https://lore.kernel.org/r/20190902120548.GB15931@infradead.org/Reported-by:
-
Gao Xiang authored
As Christoph suggested [1], "Why is this called vnode instead of inode? That seems like a rather odd naming for a Linux file system." [1] https://lore.kernel.org/r/20190829101545.GC20598@infradead.org/Reported-by:
-
Gao Xiang authored
As Christoph said [1] "having this function seems entirely pointless", let's kill those. filesystem function name ext2,f2fs,ext4,isofs,squashfs,cifs,... init_inodecache In addition, add a necessary "rcu_barrier()" on exit_fs(); [1] https://lore.kernel.org/r/20190829101545.GC20598@infradead.org/Reported-by:
-
Gao Xiang authored
updates inode naming - kill is_inode_layout_compression [1] - kill magic underscores [2] [3] - better naming for datamode & data_mapping_mode [3] - better naming erofs_inode_{compact, extended} [4] [1] https://lore.kernel.org/r/20190829102426.GE20598@infradead.org/ [2] https://lore.kernel.org/r/20190829102426.GE20598@infradead.org/ [3] https://lore.kernel.org/r/20190902122627.GN15931@infradead.org/ [4] https://lore.kernel.org/r/20190902125438.GA17750@infradead.org/Reported-by: -
Gao Xiang authored
As Christoph said [1], "This is only cosmetic, why not stick to feature_compat and feature_incompat?" In my thought, requirements means "incompatible" instead of "feature" though. [1] https://lore.kernel.org/r/20190902125109.GA9826@infradead.org/Reported-by:
-
Gao Xiang authored
As Christoph said, "This looks like a really obsfucated way to write: return datamode == EROFS_INODE_FLAT_COMPRESSION || datamode == EROFS_INODE_FLAT_COMPRESSION_LEGACY; " Although I had my own consideration, it's the right way for now. [1] https://lore.kernel.org/r/20190829095954.GB20598@infradead.org/Reported-by:
-
Gao Xiang authored
As Christoph suggested "Please don't add __packed" [1], remove all __packed except struct erofs_dirent here. Note that all on-disk fields except struct erofs_dirent (12 bytes with a 8-byte nid) in EROFS are naturally aligned. [1] https://lore.kernel.org/r/20190829095954.GB20598@infradead.org/Reported-by:
-
Gao Xiang authored
As Christoph suggested [1], these macros are much more readable as a function. [1] https://lore.kernel.org/r/20190829095954.GB20598@infradead.org/Reported-by:
-
Gao Xiang authored
As Christoph suggested [1], on-disk format should have explicitly assigned numbers. [1] https://lore.kernel.org/r/20190829095954.GB20598@infradead.org/Reported-by:
-
Gao Xiang authored
As Christoph suggested [1], "Please remove all the byte offset comments. that is something that can easily be checked with gdb or pahole." [1] https://lore.kernel.org/r/20190829095954.GB20598@infradead.org/Reported-by:
-
Leandro Ribeiro authored
Fix the following checkpatch warning: "WARNING: void function return statements are not generally useful" Signed-off-by:
Leandro Ribeiro <leandrohr@riseup.net> Link: https://lore.kernel.org/r/20190904210631.13599-1-leandrohr@riseup.netSigned-off-by:
-
Beatriz Martins de Carvalho authored
Fix checkpath error "CHECK: Blank lines aren't necessary after an open brace '{'" in rtllib.h:482. Signed-off-by:Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com> Link: https://lore.kernel.org/r/20190904210326.17983-1-martinsdecarvalhobeatriz@gmail.comSigned-off-by:
-
YueHaibing authored
Use kmemdup rather than duplicating its implementation Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190905030047.88401-1-yuehaibing@huawei.comSigned-off-by:
-
YueHaibing authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
-
YueHaibing authored
Remove duplicated include. Signed-off-by:
-
- 04 Sep, 2019 5 commits
-
-
zhong jiang authored
kfree has taken the null check in account. hence it is unnecessary to add the null check before kfree the object. Just remove it. Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Link: https://lore.kernel.org/r/1567591408-24268-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
-
Dan Carpenter authored
These two error paths need to unlock before we can return. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20190904095908.GA7007@mwandaSigned-off-by:
-
Pratik Shinde authored
while filling the linux inode, using switch-case statement to check the type of inode. switch-case statement looks more clean here. Signed-off-by:
Pratik Shinde <pratikshinde320@gmail.com> Reviewed-by:
-
Valentin Vidic authored
Fixes checkpatch.pl warnings: CHECK: Comparison to NULL could be written "expr" CHECK: Comparison to NULL could be written "!expr" Signed-off-by:
Valentin Vidic <vvidic@valentin-vidic.from.hr> Link: https://lore.kernel.org/r/20190903205659.18856-1-vvidic@valentin-vidic.from.hrSigned-off-by:
-
zhong jiang authored
Use kzfree instead of memset() + kfree(). Signed-off-by:
-
- 03 Sep, 2019 13 commits
-
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-5.4b-take3' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new device support, cleanups and features for IIO in the 5.4 cycle Revised pull request to fix up a missing Signed-off-by and roll in a fix in the lsm9ds1 support after I broke it when applying. Revised again because the fix changed a hash meaning a fix that previously followed it now had the wrong fixes tag. A few fixes in here that could have gone a faster path but aren't quite worth the rush for 5.3. New device support * ad7606 - Support the ad7606b which adds a software controlled mode alongside the pin controlled only approach of the ad7606. Including dt-bindings. * lsm6dsx - Add support for the gyro and accelerometer part of the lsm9ds1 which is a compound device also including a magnetometer (st_sensors driver). Includes bindings and precursor rework of the driver. Features * ad7192 - Add support for low pass filter control. - DT binding docs. Cleanups and minor fixes * MAINTAINERS - Fix a typo in a path. - Add entry for ad7606 * ad5380 - Fix a failure to dereference a pointer before atempting to assign the value. * ad7192 - Drop platform data as not used in mainline and we now have full DT bindings. * ad7606 - YAML conversion for dt-bindings. * adis16240 - Rework write_raw to make it more readable using GENMASK. * adis16460 - Fix and issue with an unsigned variable holding potential negatives. * cros_ec - Fix missing default of calibration vector so that we get 'something' before calibration is complete on a given axis. * hid-sensors - Use int_pow instead of opencoding. * isl29501 - rename dt-binding docs to include renesas inline with other renesas parts and general current convention. * kxcjk1013 - Improve comments on the 'unusual' ACPI ids used to identify which sensor is which in certain laptops. * lsm6dsx - Add one bit to the fifo status masks for a number of parts. - Drop a reserved entry from the sensitivity values to tidy up interface. - Use core conversion macro from G to m/s^2 for lsm9ds1 to make it easier to relate to the datasheet and consistent with other parts supported. * max1027 - Use device managed APIs to avoid manual error handling and cleanup. * rfd77402 - Typo in Kconfig help. * sc27xx - Switch to polling mode from interrupts as interrupt handling typically to slow for very short sleeps. * st-sensors - Fix some missing selects for regmap. * tools - Add a .gitignore containing the binary outputs. * tag 'iio-for-5.4b-take3' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (27 commits) iio: imu: st_lsm6dsx: rely on IIO_G_TO_M_S_2 for gain definition for LSM9DS1 iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1 iio: cros_ec: set calibscale for 3d MEMS to unit vector iio: dac: ad5380: fix incorrect assignment to val iio: imu: st_lsm6dsx: Fix FIFO diff mask for tagged fifo dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1 iio: imu: st_lsm6dsx: move register definitions to sensor_settings struct iio: imu: st_lsm6dsx: introduce update_fifo function pointer dt-bindings: iio: light: isl29501: Rename bindings documentation file Kconfig: Fix the reference to the RFD77402 ToF sensor in the 'help' section iio: st_sensors: Fix build error dt-bindings: iio: adc: Add AD7606B ADC documentation dt-bindings: iio: adc: Migrate AD7606 documentation to yaml MAINTAINERS: Add Beniamin Bia for AD7606 driver iio: adc: ad7606: Add support for AD7606B ADC tools: iio: add .gitignore iio: adc: sc27xx: Change to polling mode to read data iio: hid-sensor-attributes: Convert to use int_pow() iio: adc: max1027: Use device-managed APIs ...
-
Lorenzo Bianconi authored
Rely on IIO_G_TO_M_S_2 macro for LSM9DS1 accelerometer gain definitions Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Lorenzo Bianconi authored
Get rid of invalid sensitivity value for LSM9DS1 gyro sensor Fixes: 52f4b1f1 ("iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1") Signed-off-by:
-
Valentin Vidic authored
Replace with bool where it makes sense. Also drop unused local variable lossy in fat_find_dir_entry. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Valentin Vidic authored
Fixes checkpatch.pl warnings: CHECK: 'consistancy' may be misspelled - perhaps 'consistency'? CHECK: 'stuct' may be misspelled - perhaps 'struct'? Signed-off-by:
-
Valentin Vidic authored
Fixes checkpatch.pl warnings: CHECK: Unbalanced braces around else statement CHECK: braces {} should be used on all arms of this statement Signed-off-by: -
Gwendal Grignou authored
By default, set the calibscale vector to unit vector. When calibrating one axis, the other axis calibrations are sent as well. If left to 0, sensor data from uncalibrated axis are zero'ed out until all axis are calibrated. Fixes: ed1f2e85 ("iio: cros_ec: Add calibscale for 3d MEMS ") Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Signed-off-by:
-
Colin Ian King authored
Currently the pointer val is being incorrectly incremented instead of the value pointed to by val. Fix this by adding in the missing * indirection operator. Addresses-Coverity: ("Unused value") Fixes: c03f2c53 ("staging:iio:dac: Add AD5380 driver") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
mario tesi authored
According to the latest version of datasheet the mask for number of unread sensor data in FIFO_STATUS registers has been extended to 10 bits The devices involved are: - LSM6DSO - LSM6DSOX - ASM330LHH - LSM6DSR - ISM330DHCX Signed-off-by:
mario tesi <mario.tesi@st.com> Acked-by:
-
Martin Kepplinger authored
Note the binding is st,lsm9ds1-imu. This device is effectively two separate devices in the same package. (separate addreses, chip selects etc) The magnetometer is already supported as lsm9ds1-mag. imu may not be the best name but it's the best that anyone has yet come up with for a gyro and accel part. Signed-off-by:
Martin Kepplinger <martin.kepplinger@puri.sm> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Martin Kepplinger authored
The LSM9DS1's accelerometer / gyroscope unit and it's magnetometer (separately supported in iio/magnetometer/st_magn*) are located on a separate i2c addresses on the bus. For the datasheet, see https://www.st.com/resource/en/datasheet/lsm9ds1.pdf Treat it just like the LSM6* devices and, despite it's name, hook it up to the st_lsm6dsx driver, using it's basic functionality. accelerometer and gyroscope are not independently clocked. It runs at the gyro frequencies if both are enabled, see chapter 7.12 of the datasheet. We could have handled this as a single IIO device but we have split it up to be more consistent with the other more flexible devices. Despite supporting and testing the LSM9DS1, we call the gyro channels iio_chan_spec struct "st_lsm6ds0_gyro_channels" because the register description is equal. This suggests that supporting LSM6DS0 should be trivial to do. Signed-off-by:
-
Rasmus Villemoes authored
Currently, __inline is #defined as inline in compiler_types.h, so this should not change functionality. It is preparation for removing said #define. While at it, change some "inline static" to the customary "static inline" order. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20190830231527.22304-2-linux@rasmusvillemoes.dkSigned-off-by:
-
Ivan Safonov authored
skb_put_data is shorter and clear. Signed-off-by:
Ivan Safonov <insafonov@gmail.com> Link: https://lore.kernel.org/r/20190901195301.GA16043@alphaSigned-off-by:
-
