015c9cbc ("mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of
AER") added PCI_GLI_9750_CORRERR_MASK, the offset of the AER Capability in
config space, and PCI_GLI_9750_CORRERR_MASK_REPLAY_TIMER_TIMEOUT, the
Replay Timer Timeout bit in the AER Correctable Error Status register.

Use pci_find_ext_capability() to locate the AER Capability and use the
existing PCI_ERR_COR_REP_TIMER definition to mask the bit.

This removes a little bit of unnecessarily device-specific code and makes
AER-related things more greppable.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240327214831.1544595-2-helgaas@kernel.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Update my e-mail address to adureghello@baylibre.com.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://lore.kernel.org/r/20240326164733.15271-1-adureghello@baylibre.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

This is useful to check if a quirk has been applied for the connected
mmc card.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://lore.kernel.org/r/20240326094215.212930-2-r.czerwinski@pengutronix.deSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Convert the existing symbolic permissions to the octal presentation as
this is the preferred representation for debugfs permissions.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://lore.kernel.org/r/20240326094215.212930-1-r.czerwinski@pengutronix.deSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add a compatible string for the SDHC binding of NXP S32G3 platforms. Here
we use "nxp,s32g2-usdhc" as fallback since the s32g2-usdhc
driver works also on S32G3 platforms.
Signed-off-by: Wadim Mueller <wafgo01@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240324214329.29988-4-wafgo01@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Using __exit for the remove function results in the remove callback being
discarded with CONFIG_MMC_DAVINCI=y. When such a device gets unbound (e.g.
using sysfs or hotplug), the driver is just removed without the cleanup
being performed. This results in resource leaks. Fix it by compiling in the
remove callback unconditionally.

This also fixes a W=1 modpost warning:

WARNING: modpost: drivers/mmc/host/davinci_mmc: section mismatch in
reference: davinci_mmcsd_driver+0x10 (section: .data) ->
davinci_mmcsd_remove (section: .exit.text)

Fixes: b4cff454 ("DaVinci: MMC: MMC/SD controller driver for DaVinci family")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240324114017.231936-2-u.kleine-koenig@pengutronix.deSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

For enabling CQE support just set 'supports-cqe' in your DevTree file
for appropriate mmc node.
Signed-off-by: Sergey Khimich <serghox@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240319115932.4108904-3-serghox@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

There are could be specific limitations for some mmc
controllers for setting cqhci transfer descriptors.
So add callback to allow implement driver specific function.
Signed-off-by: Sergey Khimich <serghox@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240319115932.4108904-2-serghox@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The sdhci_am654_set_clock function is also used to enable
delay chain, therefore fix comments to be more generic in
case we are not enabling DLL.
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-6-jm@ti.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

While integer type works, the otap_del_sel and itap_del_sel
arrays are manipulated as u32, so change array types to u32.
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-5-jm@ti.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

While STRB is currently used for DATA and CRC responses, the CMD
responses from the device to the host still require ITAPDLY for
HS400 timing.

Currently what is stored for HS400 is the ITAPDLY from High Speed
mode which is incorrect. The ITAPDLY for HS400 speed mode should
be the same as ITAPDLY as HS200 timing after tuning is executed.
Add the functionality to save ITAPDLY from HS200 tuning and save
as HS400 ITAPDLY.

Fixes: a161c45f ("mmc: sdhci_am654: Enable DLL only for some speed modes")
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-8-jm@ti.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add ITAPDLYSEL to sdhci_j721e_4bit_set_clock function.
This allows to set the correct ITAPDLY for timings that
do not carry out tuning.

Fixes: 1accbced ("mmc: sdhci_am654: Add Support for 4 bit IP on J721E")
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-7-jm@ti.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Currently the OTAP/ITAP delay enable functionality is incorrect in
the am654_set_clock function. The OTAP delay is not enabled when
timing < SDR25 bus speed mode. The ITAP delay is not enabled for
timings that do not carry out tuning.

Add this OTAP/ITAP delay functionality according to the datasheet
[1] OTAPDLYENA and ITAPDLYENA for MMC0.

[1] https://www.ti.com/lit/ds/symlink/am62p.pdf

Fixes: 8ee5fc0e ("mmc: sdhci_am654: Update OTAPDLY writes")
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-4-jm@ti.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

For DDR52 timing, DLL is enabled but tuning is not carried
out, therefore the ITAPDLY value in PHY CTRL 4 register is
not correct. Fix this by writing ITAPDLY after enabling DLL.

Fixes: a161c45f ("mmc: sdhci_am654: Enable DLL only for some speed modes")
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-3-jm@ti.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Currently the sdhci_am654 driver only supports one tuning
algorithm which should be used only when DLL is enabled. The
ITAPDLY is selected from the largest passing window and the
buffer is viewed as a circular buffer.

The new algorithm should be used when the delay chain
is enabled. The ITAPDLY is selected from the largest passing
window and the buffer is not viewed as a circular buffer.

This implementation is based off of the following paper: [1].

Also add support for multiple failing windows.

[1] https://www.ti.com/lit/an/spract9/spract9.pdf

Fixes: 13ebeae6 ("mmc: sdhci_am654: Add support for software tuning")
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-2-jm@ti.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Per filesystems/sysfs.rst, show() should only use sysfs_emit()
or sysfs_emit_at() when formatting the value to be returned to user space.

coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().

sprintf() will be converted as weel if they have.

Generally, this patch is generated by
make coccicheck M=<path/to/file> MODE=patch \
COCCI=scripts/coccinelle/api/device_attr_show.cocci

No functional change intended
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240314091512.1323650-1-lizhijian@fujitsu.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The err is being set to 0 and replaced every time after this
assignment. Remove this assignment as it is extraneous.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240307145013.2721326-1-usama.anjum@collabora.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The err is being set to 0 and replaced every time after this
assignment. Remove this assignment as it is extraneous.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240307122129.2359553-1-usama.anjum@collabora.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240307114500.3643489-1-andriy.shevchenko@linux.intel.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

It seems the of_get_named_gpio() is solely used to check
if the GPIO is present in DT as the function can return 0
if and only if it's present and it becomes in the global
number space 0. But this quite likely shows that the code
wasn't ever been tested on the systems when no GPIO is provided.
In any case, the proper test is just to call of_property_present()
without any attempts in requesting GPIO (as we haven't saved the
number or descriptor anywhere in the code).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240307121912.3676850-1-andriy.shevchenko@linux.intel.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Axe Yang <axe.yang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240307114348.3643034-1-andriy.shevchenko@linux.intel.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240307114600.3643948-1-andriy.shevchenko@linux.intel.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Merge tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Deduplicate Kconfig entries for CONFIG_CXL_PMU

 - Fix unselectable choice entry in MIPS Kconfig, and forbid this
   structure

 - Remove unused include/asm-generic/export.h

 - Fix a NULL pointer dereference bug in modpost

 - Enable -Woverride-init warning consistently with W=1

 - Drop KCSAN flags from *.mod.c files

* tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: Fix typo HEIGTH to HEIGHT
  Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer
  kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries
  kbuild: make -Woverride-init warnings more consistent
  modpost: do not make find_tosym() return NULL
  export.h: remove include/asm-generic/export.h
  kconfig: do not reparent the menu inside a choice block
  MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice
  cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig

Pull EDAC fixes from Borislav Petkov:

 - Fix more issues in the AMD FMPM driver

* tag 'edac_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  RAS: Avoid build errors when CONFIG_DEBUG_FS=n
  RAS/AMD/FMPM: Safely handle saved records of various sizes
  RAS/AMD/FMPM: Avoid NULL ptr deref in get_saved_records()

Pull irq fixes from Borislav Petkov:

 - Fix an unused function warning on irqchip/irq-armada-370-xp

 - Fix the IRQ sharing with pinctrl-amd and ACPI OSL

* tag 'irq_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/armada-370-xp: Suppress unused-function warning
  genirq: Introduce IRQF_COND_ONESHOT and use it in pinctrl-amd

Pull x86 perf fixes from Borislav Petkov:

 - Define the correct set of default hw events on AMD Zen4

 - Use the correct stalled cycles PMCs on AMD Zen2 and newer

 - Fix detection of the LBR freeze feature on AMD

* tag 'perf_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/core: Define a proper ref-cycles event for Zen 4 and later
  perf/x86/amd/core: Update and fix stalled-cycles-* events for Zen 2 and later
  perf/x86/amd/lbr: Use freeze based on availability
  x86/cpufeatures: Add new word for scattered features

Pull timers update from Borislav Petkov:

 - Volunteer in Anna-Maria and Frederic as timers co-maintainers so that
   tglx can relax more :-P

* tag 'timers_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Add co-maintainers for time[rs]

Pull objtool fix from Borislav Petkov:

 - Fix a format specifier build error in objtool during an x32 build

* tag 'objtool_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix compile failure when using the x32 compiler

Pull x86 fixes from Borislav Petkov:

 - Make sure single object builds in arch/x86/virt/ ala
      make ... arch/x86/virt/vmx/tdx/seamcall.o
   work again

 - Do not do ROM range scans and memory validation when the kernel is
   running as a SEV-SNP guest as those can get problematic and, before
   that, are not really needed in such a guest

 - Exclude the build-time generated vdso-image-x32.o object from objtool
   validation and in particular the return sites in there due to a
   warning which fires when an unpatched return thunk is being used

 - Improve the NMI CPUs stall message to show additional information
   about the state of each CPU wrt the NMI handler

 - Enable gcc named address spaces support only on !KCSAN configs due to
   compiler options incompatibility

 - Revert a change which was trying to use GB pages for mapping regions
   only when the regions would be large enough but that change lead to
   kexec failing

 - A documentation fixlet

* tag 'x86_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Use obj-y to descend into arch/x86/virt/
  x86/sev: Skip ROM range scans and validation for SEV-SNP guests
  x86/vdso: Fix rethunk patching for vdso-image-x32.o too
  x86/nmi: Upgrade NMI backtrace stall checks & messages
  x86/percpu: Disable named address spaces for KCSAN
  Revert "x86/mm/ident_map: Use gbpages only where full GB page should be mapped."
  Documentation/x86: Fix title underline length

Fixed a typo in some variables where height was misspelled as heigth.
Signed-off-by: Isak Ellmer <isak01@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

As of the first s390 pull request during the 6.9 merge window,
commit 691632f0 ("Merge tag 's390-6.9-1' of
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux"), s390 can be
built with LLVM=1 when using LLVM 18.1.0, which is the first version
that has SystemZ support implemented in ld.lld and llvm-objcopy.

Update the supported architectures table in the Kbuild LLVM
documentation to note this explicitly to make it more discoverable by
users and other developers. Additionally, this brings s390 in line with
the rest of the architectures in the table, which all support LLVM=1.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When KCSAN and CONSTRUCTORS are enabled, one can trigger the

  "Unpatched return thunk in use. This should not happen!"

catch-all warning.

Usually, when objtool runs on the .o objects, it does generate a section
.return_sites which contains all offsets in the objects to the return
thunks of the functions present there. Those return thunks then get
patched at runtime by the alternatives.

KCSAN and CONSTRUCTORS add this to the object file's .text.startup
section:

  -------------------
  Disassembly of section .text.startup:

  ...

  0000000000000010 <_sub_I_00099_0>:
    10:   f3 0f 1e fa             endbr64
    14:   e8 00 00 00 00          call   19 <_sub_I_00099_0+0x9>
                          15: R_X86_64_PLT32      __tsan_init-0x4
    19:   e9 00 00 00 00          jmp    1e <__UNIQUE_ID___addressable_cryptd_alloc_aead349+0x6>
                          1a: R_X86_64_PLT32      __x86_return_thunk-0x4
  -------------------

which, if it is built as a module goes through the intermediary stage of
creating a <module>.mod.c file which, when translated, receives a second
constructor:

  -------------------
  Disassembly of section .text.startup:

  0000000000000010 <_sub_I_00099_0>:
    10:   f3 0f 1e fa             endbr64
    14:   e8 00 00 00 00          call   19 <_sub_I_00099_0+0x9>
                          15: R_X86_64_PLT32      __tsan_init-0x4
    19:   e9 00 00 00 00          jmp    1e <_sub_I_00099_0+0xe>
                          1a: R_X86_64_PLT32      __x86_return_thunk-0x4

  ...

  0000000000000030 <_sub_I_00099_0>:
    30:   f3 0f 1e fa             endbr64
    34:   e8 00 00 00 00          call   39 <_sub_I_00099_0+0x9>
                          35: R_X86_64_PLT32      __tsan_init-0x4
    39:   e9 00 00 00 00          jmp    3e <__ksymtab_cryptd_alloc_ahash+0x2>
                          3a: R_X86_64_PLT32      __x86_return_thunk-0x4
  -------------------

in the .ko file.

Objtool has run already so that second constructor's return thunk cannot
be added to the .return_sites section and thus the return thunk remains
unpatched and the warning rightfully fires.

Drop KCSAN flags from the mod.c generation stage as those constructors
do not contain data races one would be interested about.

Debugged together with David Kaplan <David.Kaplan@amd.com> and Nikolay
Borisov <nik.borisov@suse.com>.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/0851a207-7143-417e-be31-8bf2b3afb57d@molgen.mpg.deSigned-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.

Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.

There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.

Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.

Fixes: 2cd3271b ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When compiling the v6.9-rc1 kernel with the x32 compiler, the following
errors are reported. The reason is that we take an "unsigned long"
variable and print it using "PRIx64" format string.

	In file included from check.c:16:
	check.c: In function ‘add_dead_ends’:
	/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:46:17: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘long unsigned int’ [-Werror=format=]
	   46 |                 "%s: warning: objtool: " format "\n",   \
	      |                 ^~~~~~~~~~~~~~~~~~~~~~~~
	check.c:613:33: note: in expansion of macro ‘WARN’
	  613 |                                 WARN("can't find unreachable insn at %s+0x%" PRIx64,
	      |                                 ^~~~
	...
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-kernel@vger.kernel.org

Pull xfs fixes from Chandan Babu:

 - Allow stripe unit/width value passed via mount option to be written
   over existing values in the super block

 - Do not set current->journal_info to avoid its value from being miused
   by another filesystem context

* tag 'xfs-6.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: don't use current->journal_info
  xfs: allow sunit mount option to repair bad primary sb stripe values

Pull SCSI fixes and updates from James Bottomley:
 "Fully half this pull is updates to lpfc and qla2xxx which got
  committed just as the merge window opened. A sizeable fraction of the
  driver updates are simple bug fixes (and lock reworks for bug fixes in
  the case of lpfc), so rather than splitting the few actual
  enhancements out, we're just adding the drivers to the -rc1 pull.

  The enhancements for lpfc are log message removals, copyright updates
  and three patches redefining types. For qla2xxx it's just removing a
  debug message on module removal and the manufacturer detail update.

  The two major fixes are the sg teardown race and a core error leg
  problem with the procfs directory not being removed if we destroy a
  created host that never got to the running state. The rest are minor
  fixes and constifications"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (41 commits)
  scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload
  scsi: core: Fix unremoved procfs host directory regression
  scsi: mpi3mr: Avoid memcpy field-spanning write WARNING
  scsi: sd: Fix TCG OPAL unlock on system resume
  scsi: sg: Avoid sg device teardown race
  scsi: lpfc: Copyright updates for 14.4.0.1 patches
  scsi: lpfc: Update lpfc version to 14.4.0.1
  scsi: lpfc: Define types in a union for generic void *context3 ptr
  scsi: lpfc: Define lpfc_dmabuf type for ctx_buf ptr
  scsi: lpfc: Define lpfc_nodelist type for ctx_ndlp ptr
  scsi: lpfc: Use a dedicated lock for ras_fwlog state
  scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up()
  scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()
  scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic
  scsi: lpfc: Remove IRQF_ONESHOT flag from threaded IRQ handling
  scsi: lpfc: Move NPIV's transport unregistration to after resource clean up
  scsi: lpfc: Remove unnecessary log message in queuecommand path
  scsi: qla2xxx: Update version to 10.02.09.200-k
  scsi: qla2xxx: Delay I/O Abort on PCI error
  scsi: qla2xxx: Change debug message during driver unload
  ...

Pull i2c fix from Wolfram Sang:
 "A fix from Andi for I2C host drivers"

* tag 'i2c-for-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i801: Fix a refactoring that broke a touchpad on Lenovo P1

Pull USB fixes from Greg KH:
 "Here are a bunch of small USB fixes for reported problems and
  regressions for 6.9-rc2. Included in here are:

   - deadlock fixes for long-suffering issues

   - USB phy driver revert for reported problem

   - typec fixes for reported problems

   - duplicate id in dwc3 dropped

   - dwc2 driver fixes

   - udc driver warning fix

   - cdc-wdm race bugfix

   - other tiny USB bugfixes

  All of these have been in linux-next this past week with no reported
  issues"

* tag 'usb-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  USB: core: Fix deadlock in port "disable" sysfs attribute
  USB: core: Add hub_get() and hub_put() routines
  usb: typec: ucsi: Check capabilities before cable and identity discovery
  usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset
  usb: typec: ucsi_acpi: Refactor and fix DELL quirk
  usb: typec: ucsi: Ack unsupported commands
  usb: typec: ucsi: Check for notifications after init
  usb: typec: ucsi: Clear EVENT_PENDING under PPM lock
  usb: typec: Return size of buffer if pd_set operation succeeds
  usb: udc: remove warning when queue disabled ep
  usb: dwc3: pci: Drop duplicate ID
  usb: dwc3: Properly set system wakeup
  Revert "usb: phy: generic: Get the vbus supply"
  usb: cdc-wdm: close race between read and workqueue
  usb: dwc2: gadget: LPM flow fix
  usb: dwc2: gadget: Fix exiting from clock gating
  usb: dwc2: host: Fix ISOC flow in DDMA mode
  usb: dwc2: host: Fix remote wakeup from hibernation
  usb: dwc2: host: Fix hibernation flow
  USB: core: Fix deadlock in usb_deauthorize_interface()
  ...

Pull staging driver fixes from Greg KH:
 "Here are two small staging driver fixes for the vc04_services driver
  that resolve reported problems:

   - strncpy fix for information leak

   - another information leak discovered by the previous strncpy fix

  Both of these have been in linux-next all this past week with no
  reported issues"

* tag 'staging-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vc04_services: fix information leak in create_component()
  staging: vc04_services: changen strncpy() to strscpy_pad()