- 15 Feb, 2023 1 commit
-
-
Imre Deak authored
If fbdev is not initialized for some reason - in practice on platforms without display - suspending fbdev should be skipped during system suspend, fix this up. While at it add an assert that suspending fbdev only happens with the display present. This fixes the following: [ 91.227923] PM: suspend entry (s2idle) [ 91.254598] Filesystems sync: 0.025 seconds [ 91.270518] Freezing user space processes [ 91.272266] Freezing user space processes completed (elapsed 0.001 seconds) [ 91.272686] OOM killer disabled. [ 91.272872] Freezing remaining freezable tasks [ 91.274295] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 91.659622] BUG: kernel NULL pointer dereference, address: 00000000000001c8 [ 91.659981] #PF: supervisor write access in kernel mode [ 91.660252] #PF: error_code(0x0002) - not-present page [ 91.660511] PGD 0 P4D 0 [ 91.660647] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 91.660875] CPU: 4 PID: 917 Comm: bash Not tainted 6.2.0-rc7+ #54 [ 91.661185] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20221117gitfff6d81270b5-9.fc37 unknown [ 91.661680] RIP: 0010:mutex_lock+0x19/0x30 [ 91.661914] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 53 48 89 fb e8 62 d3 ff ff 31 c0 65 48 8b 14 25 00 15 03 00 <f0> 48 0f b1 13 75 06 5b c3 cc cc cc cc 48 89 df 5b eb b4 0f 1f 40 [ 91.662840] RSP: 0018:ffffa1e8011ffc08 EFLAGS: 00010246 [ 91.663087] RAX: 0000000000000000 RBX: 00000000000001c8 RCX: 0000000000000000 [ 91.663440] RDX: ffff8be455eb0000 RSI: 0000000000000001 RDI: 00000000000001c8 [ 91.663802] RBP: ffff8be459440000 R08: ffff8be459441f08 R09: ffffffff8e1432c0 [ 91.664167] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 91.664532] R13: 00000000000001c8 R14: 0000000000000000 R15: ffff8be442f4fb20 [ 91.664905] FS: 00007f28ffc16740(0000) GS:ffff8be4bb900000(0000) knlGS:0000000000000000 [ 91.665334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 91.665626] CR2: 00000000000001c8 CR3: 0000000114926006 CR4: 0000000000770ee0 [ 91.665988] PKRU: 55555554 [ 91.666131] Call Trace: [ 91.666265] <TASK> [ 91.666381] intel_fbdev_set_suspend+0x97/0x1b0 [i915] [ 91.666738] i915_drm_suspend+0xb9/0x100 [i915] [ 91.667029] pci_pm_suspend+0x78/0x170 [ 91.667234] ? __pfx_pci_pm_suspend+0x10/0x10 [ 91.667461] dpm_run_callback+0x47/0x150 [ 91.667673] __device_suspend+0x10a/0x4e0 [ 91.667880] dpm_suspend+0x134/0x270 [ 91.668069] dpm_suspend_start+0x79/0x80 [ 91.668272] suspend_devices_and_enter+0x11b/0x890 [ 91.668526] pm_suspend.cold+0x270/0x2fc [ 91.668737] state_store+0x46/0x90 [ 91.668916] kernfs_fop_write_iter+0x11b/0x200 [ 91.669153] vfs_write+0x1e1/0x3a0 [ 91.669336] ksys_write+0x53/0xd0 [ 91.669510] do_syscall_64+0x58/0xc0 [ 91.669699] ? syscall_exit_to_user_mode_prepare+0x18e/0x1c0 [ 91.669980] ? syscall_exit_to_user_mode_prepare+0x18e/0x1c0 [ 91.670278] ? syscall_exit_to_user_mode+0x17/0x40 [ 91.670524] ? do_syscall_64+0x67/0xc0 [ 91.670717] ? __irq_exit_rcu+0x3d/0x140 [ 91.670931] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 91.671202] RIP: 0033:0x7f28ffd14284 v2: CC stable. (Jani) Fixes: f8cc091e ("drm/i915/fbdev: suspend HPD before fbdev unregistration") References: https://gitlab.freedesktop.org/drm/intel/-/issues/8015Reported-and-tested-by:
iczero <iczero@hellomouse.net> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: iczero <iczero@hellomouse.net> Cc: <stable@vger.kernel.org> # v6.1+ Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208114300.3123934-2-imre.deak@intel.com
-
- 14 Feb, 2023 11 commits
-
-
Ville Syrjälä authored
Since we now populate encoder->devdata for all DP capable platforms we can consult it directly during the eDP connector init instead of taking a detour via some global list/array. Unfortunately we can't quite get rid of intel_dp_is_port_edp() since it's still used by the higher level ilk/vlv/chv output setup code. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-11-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
Instead of consulting vbt.ports[] lets just go through the whole child device list to check whether a specific port was declared by the VBT or not. Note that this doesn't change anything wrt. detecting duplicate child devices with the same port as vbt.ports[] would also always contain exactly one of the duplicates. v2: Include a is_port_valid() check to deal with some broken VBTs Mention something about duplicate port detection (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: -
Ville Syrjälä authored
Currently intel_bios_port_aux_ch() digs out the devdata (VBT child device info) from the vbt.ports[] array. We need to get rid of that, so just pass in the correct encoder->devdata (now that we have it also for g4x+ ports) directly. Signed-off-by:
-
Ville Syrjälä authored
Let's make encoder->devdata (the VBT information for the port) available on g4x+ platforms as well. Much easier when you can just grab it there instead of trying to find it from some global list array based on the port. Note that (unlike DDI platforms) we don't currently require that each DP/HDMI port is actually declared in VBT. Perhaps in the future we may want to rethink that, but for now just stick in a debug+FIXME as a reminder. Signed-off-by:
-
Ville Syrjälä authored
Display WA #1178 calls us to tweak some magic bits when doing AUX to an external combo PHY port. Instead of looking to see if the VBT has declared such a port (which could in theory even alias with a declared eDP port on the same PHY) just check the real situation based on the registered encoders. The only slight chicken vs. egg situation here is during output probing. But typically we'd register the eDP ports first and so once we get to probe anything external on the combo PHY we have already determined if it's eDP or not. Signed-off-by:
-
Ville Syrjälä authored
intel_bios_is_port_hpd_inverted() is only used on bxt/glk on which we always have encoder->devdata available. So consult that instead of digging around in vbt.ports[]. And rename the function to match the common pattern. Signed-off-by:
-
Ville Syrjälä authored
The sole user of intel_bios_is_lane_reversal_needed() has the devdata already located, so pass it in directly instead of digging it again from vbt.ports[]. And rename the function to follow the common pattern for these things. Signed-off-by:
-
Ville Syrjälä authored
We always have encoder->devdata available on the platforms that can have LSPCON. So let's start looking there instead of digging it out from vbt.ports[]. And let's rename the function to fit the common pattern for these things. Signed-off-by:
-
Ville Syrjälä authored
Lot of the loops over VBT child devices have variables declared outside the loop but only used inside the loop. Move the variables to a tighter scope. Signed-off-by:
-
Ville Syrjälä authored
bxt_hotplug_enables() needs to dig out not only the hpd_pin but also the VBT child device info, so let's just pass in the whole encoder to avoid having to look things up multiple times. Signed-off-by:
-
Suraj Kandpal authored
According VDSC spec 1.2a Section 3.8 Options for Slice implies that 108 lines is an optimal slice height, but any size can be used as long as vertical active integer multiple and maximum vertical slice count requirements are met. Bspec: 49259 --v3 -remove previous fallback code and return slice_height as 2 [Jani] Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Swati Sharma <swati2.sharma@intel.com> Signed-off-by:
Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by:
-
- 10 Feb, 2023 5 commits
-
-
Ville Syrjälä authored
It's hard to figure out whether the number is hex or decimal if doesn't have the 0x to indicate hex. Signed-off-by:
-
Ville Syrjälä authored
Dump the stepping information alongside all the other device info. Might avoid some guesswork when reading logs. Signed-off-by:
-
Nirmoy Das authored
For i915 functions pass struct drm_i915_private directly instead of struct drm_device. v2: Use to_i915(dev) directly without alias(Andrzej). Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Suggested-by:
Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by:
Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125095603.17845-1-nirmoy.das@intel.com
-
Ville Syrjälä authored
Replaces wm.max_level with wm.num_levels, since that generally results in nicer looking code (for-loops can be in standard form etc.). Also get rid of the two different wrappers we have for this (ilk_wm_max_level() and intel_wm_num_levels()). They don't really do anything for us other than potentially slow things down if the compiler actually emits the function calls every time (num_planes*num_wm_levels*higher_level_wm_function_calls could be a big number). The watermark code already shows up far too prominently in cpu profiles. Though I must admit that I didn't look at the generated code this time. v2: Fix the ilk_wm_merge() off-by-one (Jani) Signed-off-by:
-
Ville Syrjälä authored
Switch ilk+ and skl+ platforms to also setting up wm.max_level and remove a bunch of if ladders as a result. There will be a tiny change in the debugfs on CHV machines that have DVFS disabled in the BIOS. Presviously debugfs would show the latency for the DVFS level as well, but that will no longer be the case. Which is arguably better as that number is absolutely meaningless when DVFS can't be enabled anyway. Signed-off-by:
-
- 09 Feb, 2023 1 commit
-
-
Radhakrishna Sripada authored
Clock gating hooks to be initialized for MTL are yet to be implemented. Use a nop till we identify relevant WA's here. Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230111235531.3353815-3-radhakrishna.sripada@intel.com
-
- 08 Feb, 2023 8 commits
-
-
Matt Roper authored
The bspec was recently updated to remove PCI ID 0x5698; this ID is actually reserved for future use and should not be treated as DG2-G11. Bspec: 44477 Fixes: 8618b848 ("drm/i915: DG2 and ATS-M device ID updates") Signed-off-by:
Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208200905.680865-1-matthew.d.roper@intel.com
-
Ashutosh Dixit authored
This reverts commit 0349c41b. 0349c41b ("drm/i915/hwmon: Enable PL1 power limit") is incorrect and caused a major regression on ATSM. The change enabled the PL1 power limit but FW sets the default value of the PL1 limit to 0 which implies HW now works at minimum power and therefore the lowest effective frequency. This means all workloads now run slower resulting in even GuC FW load operations timing out, rendering ATSM unusable. A different solution to the original issue of the PL1 limit being disabled on ATSM is needed but till that is developed, revert 0349c41b. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8062Signed-off-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208190312.1611335-1-ashutosh.dixit@intel.com
-
Jani Nikula authored
With backlight controller set to -1 in intel_panel_init_alloc() to distinguish uninitialized values, and controller later being set only if it's present in VBT, we can end up with -1 for the controller: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 4294967295 There's no harm if it happens on platforms that ignore controller due to only one backlight controller being present, like on VLV above, but play it safe. Fixes: bf38bba3 ("drm/i915: Try to use the correct power sequencer intiially on bxt/glk") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: -
Jani Nikula authored
drmm_add_action_or_reset() is unaware of __iomem and the pointer needs to be a plain void *. Cast __iomem away and back while the pointer goes through drmm. drivers/gpu/drm/i915/intel_uncore.c:2463:17: warning: incorrect type in argument 1 (different address spaces) drivers/gpu/drm/i915/intel_uncore.c:2463:17: expected void volatile [noderef] __iomem *addr drivers/gpu/drm/i915/intel_uncore.c:2463:17: got void *regs drivers/gpu/drm/i915/intel_uncore.c:2494:16: warning: incorrect type in argument 3 (different address spaces) drivers/gpu/drm/i915/intel_uncore.c:2494:16: expected void *data drivers/gpu/drm/i915/intel_uncore.c:2494:16: got void [noderef] __iomem *regs Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Jani Nikula authored
The ucode part in the init, fini, suspend and resume function names is just unnecessary. Drop it. Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Use the second backlight controller on ICP+ if the VBT asks us to do so. On pre-MTP we also check the chicken bit to make sure the pins have been correctly muxed by the firmware. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8016Signed-off-by:
-
Ville Syrjälä authored
We now have some eDP+DSI dual panel systems floating around where the DSI panel is the secondary LFP and thus needs to consult "panel type 2" in VBT in order to locate all the other panel type dependant stuff correctly. To that end we need to pass in the devdata to intel_bios_init_panel_late(), otherwise it'll just assume we want the primary panel type. So let's try to just populate the vbt.ports[] stuff and encoder->devdata for icl+ DSI panels as well. We can't do this on older platforms as there we risk a DSI port aliasing with a HDMI/DP port, which is a totally legal thing as the DSI ports live in their own little parallel universe. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8016Signed-off-by:
-
Ville Syrjälä authored
Turns out modern (icl+) VBTs still declare their DSI ports as MIPI-A and MIPI-C despite the PHYs now being A and B. Remap appropriately to allow the panels declared as MIPI-C to work. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8016Signed-off-by:
-
- 06 Feb, 2023 3 commits
-
-
Matt Atwood authored
This patch fixes memory leaks on error escapes in i915_scatterlist.c Fixes: c3bfba9a ("drm/i915: Check for integer truncation on scatterlist creation") Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by:
Harish Chegondi <harish.chegondi@intel.com> Signed-off-by:
-
Jonathan Gray authored
described as "32 Execution Unit (EU) Super SKU" in: Intel Atom x6000E Series, and Intel Pentium and Celeron N and J Series Processors for IoT Applications Datasheet, Volume 1 Document Number: 636112-1.6 Signed-off-by:
Jonathan Gray <jsg@jsg.id.au> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Ashutosh Dixit authored
Previous documentation suggested that PL1 power limit is always enabled. However we now find this not to be the case on some platforms (such as ATSM). Therefore enable PL1 power limit during hwmon initialization. Bspec: 51864 v2: Add Bspec reference (Gwan-gyeong) v3: Add Fixes tag Fixes: 99f55efb ("drm/i915/hwmon: Power PL1 limit and TDP setting") Signed-off-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
-
- 03 Feb, 2023 4 commits
-
-
Ville Syrjälä authored
Introduce a function to emits whatever commands we need at the end of the DSB command buffer. For the moment we only do the tail cacheline alignment there, but eventually we might want to eg. emit an interrupt. Signed-off-by:
Animesh Manna <animesh.manna@intel.com>
-
Ville Syrjälä authored
Starting the DSB execution vs. waiting for it stop are two totally different things. Split intel_dsb_wait() from intel_dsb_commit() so that we can eventually allow the DSB to execute asynchronously. Signed-off-by:
-
Ville Syrjälä authored
Print the crtc/DSB id information to make it clear which DSB engine we're talking about. Signed-off-by:
-
Jouni Högander authored
After disconnecting damage worker from update logic it's left to fbdev emulation implementation to have fb_dirty function. Currently intel fbdev doesn't have it. This is causing problems to features (PSR, FBC, DRRS) relying on dirty callback. Implement simple fb_dirty callback to deliver notifications about updates in fb console. v4: Add proper Fixes tag and modify commit message v3: Check damage clip v2: Improved commit message and added Fixes tag Fixes: f231af49 ("drm/fb-helper: Disconnect damage worker from update logic") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Jouni Högander <jouni.hogander@intel.com> Signed-off-by:
-
- 02 Feb, 2023 5 commits
-
-
Jani Nikula authored
Add validity checks for the dmc ids computed from pipe parameters in intel_dmc_enable_pipe() and intel_dmc_disable_pipe(). It's slightly difficult for humans and static analyzers alike to ensure the resulting dmc ids are within bounds. Just check them and reject invalid ones. Signed-off-by:
-
Jani Nikula authored
Add a name to the dmc id validity check. Signed-off-by:
-
Jani Nikula authored
The dmc_id comes from for_each_dmc_id() in parse_dmc_fw() -> parse_dmc_fw_header() -> dmc_mmio_addr_sanity_check(). It's valid by definition. Signed-off-by:
-
Jani Nikula authored
The loop is duplicated many times, with slightly different ways. Unify. Signed-off-by:
-
Jani Nikula authored
Clarify DMC ID usage by adding enum intel_dmc_id name to the enum, and use dmc_id as the variable name for it throughout. Convert a switch-case to if-ladder to avoid warnings about not handling DMC_FW_MAX enumeration constant in the switch-case. Signed-off-by:
-
- 01 Feb, 2023 2 commits
-
-
Ville Syrjälä authored
Since SAGV is controlled via unidirectional pcode commands we have no way to query the current state. So instead let's expose the last programmed state via debugfs. This way we can at least know whether SAGV should be enabled or not (which can be important to know when dealing with underruns/etc.). Signed-off-by:
-
Ville Syrjälä authored
On icl+ SAGV is controlled by masking of the QGV points. Reduce the QGV point mask to the same kind of enabled vs. disable information that we had on previous platforms. Will be useful in answering the question whether SAGV is actually enabled or not. Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
