Add more sanity checks to the API handling, we shouldn't
be able to create a station without links, nor should we
be able to add a link to a station that wasn't created as
an MLD with links in the first place.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

There are two issues here: we unhash the link stations only
directly before freeing the station they belong to, and we
also don't unhash all the links correctly in all cases. Fix
these issues.

Fixes: ba6ddab9 ("wifi: mac80211: maintain link-sta hash table")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When modifying a link station, validate that the link address
doesn't change, except the first time the link is created.

Fixes: b95eb7f0 ("wifi: cfg80211/mac80211: separate link params from station params")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

At this point, we've already changed link_id to be zero for
a non-MLO connection, so use the 'mlo' variable rather than
link ID to determine the MLO status of the station.

Fixes: bd363ee5 ("wifi: mac80211: mlme: set sta.mlo correctly")
Fixes: 81151ce4 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

If there's a non-MLO client, the A2 must be set to the BSSID
of the link since no translation will happen in lower layers
and it's needed that way for encryption.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

There are two issues here: we need to do the translation
even in case mac80211 selected a link, and we should only
translate the A3 if it's the BSSID. Fix both.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

We should only translate addr3 here if it's the BSSID.

Fixes: 42fb9148 ("wifi: mac80211: do link->MLD address translation on RX")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

If we have a non-MLD STA on an AP MLD, we crash while
adding the station. Fix that, in this case we need to
use the STA's address also on the link data structure.

Fixes: f36fe0a2 ("wifi: mac80211: fix up link station creation/insertion")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In my previous changes here, I neglected to take the old
conn_flags into account that might still be present from
the authentication, and thus ieee80211_setup_assoc_link()
can misbehave, as well as the override calculation being
wrong. Fix that by ORing in the old flags.

Fixes: 1845c1d4 ("wifi: mac80211: mlme: refactor assoc link setup")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In a few places we need to use the AP (MLD) address, not the
deflink BSSID, the link address translation will happen later.

To make that work properly for fast-xmit, set up the ap_addr
in the vif.cfg earlier.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Delete the redundant word 'the'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220710043405.38304-1-yuanjilin@cdjrlc.com

Delete the redundant word 'the'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220710043007.33288-1-yuanjilin@cdjrlc.com

Delete the redundant word 'not'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220710042546.28504-1-yuanjilin@cdjrlc.com

Delete the redundant words 'in' and 'scan'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220710042040.22456-1-yuanjilin@cdjrlc.com

Delete the redundant words 'is' and 'with'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220710041442.16177-1-yuanjilin@cdjrlc.com

Delete the redundant word 'the'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220710041005.10950-1-yuanjilin@cdjrlc.com

Delete the redundant words 'to' and 'if'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220709135316.41425-1-yuanjilin@cdjrlc.com

Delete the redundant word 'the'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220709134701.36081-1-yuanjilin@cdjrlc.com

Delete the redundant word 'the'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220709134207.30856-1-yuanjilin@cdjrlc.com

Delete the redundant words 'this' and 'and'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220709133618.25958-1-yuanjilin@cdjrlc.com

Delete the redundant word 'early'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220709133119.21076-1-yuanjilin@cdjrlc.com

Delete the redundant word 'long'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220709132637.16717-1-yuanjilin@cdjrlc.com

lockdep complains use of uninitialized spinlock at ieee80211_do_stop() [1],
for commit f856373e ("wifi: mac80211: do not wake queues on a vif
that is being stopped") guards clear_bit() using fq.lock even before
fq_init() from ieee80211_txq_setup_flows() initializes this spinlock.

According to discussion [2], Toke was not happy with expanding usage of
fq.lock. Since __ieee80211_wake_txqs() is called under RCU read lock, we
can instead use synchronize_rcu() for flushing ieee80211_wake_txqs().

Link: https://syzkaller.appspot.com/bug?extid=eceab52db7c4b961e9d6 [1]
Link: https://lkml.kernel.org/r/874k0zowh2.fsf@toke.dk [2]
Reported-by: syzbot <syzbot+eceab52db7c4b961e9d6@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: f856373e ("wifi: mac80211: do not wake queues on a vif that is being stopped")
Tested-by: syzbot <syzbot+eceab52db7c4b961e9d6@syzkaller.appspotmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/9cc9b81d-75a3-3925-b612-9d0ad3cab82b@I-love.SAKURA.ne.jp

The assignment of the value to the variable total in the loop
condition must be enclosed in additional parentheses, since otherwise,
in accordance with the precedence of the operators, the conjunction
will be performed first, and only then the assignment.

Due to this error, a warning later in the function after the loop may
not occur in the situation when it should.

Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: 0d4171e2 ("p54: implement flush callback")
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220714134831.106004-1-subkhankulov@ispras.ru

When building with Clang we encounter this warning:
| drivers/net/wireless/mediatek/mt7601u/debugfs.c:92:6: error: format
| specifies type 'unsigned char' but the argument has type 'int'
| [-Werror,-Wformat] dev->ee->reg.start + dev->ee->reg.num - 1);

The format specifier used is `%hhu` which describes a u8. Both
`dev->ee->reg.start` and `.num` are u8 as well. However, the expression
as a whole is promoted to an int as you cannot get smaller-than-int from
addition. Therefore, to fix the warning, use the promoted-to-type's
format specifier -- in this case `%d`.

example:
```
uint8_t a = 4, b = 7;
int size = sizeof(a + b - 1);
printf("%d\n", size);
// output: 4
```

See more:
(https://wiki.sei.cmu.edu/confluence/display/c/INT02-C.+Understand+integer+conversion+rules)
"Integer types smaller than int are promoted when an operation is
performed on them. If all values of the original type can be represented
as an int, the value of the smaller type is converted to an int;
otherwise, it is converted to an unsigned int."
Signed-off-by: Justin Stitt <justinstitt@google.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220711212932.1501592-1-justinstitt@google.com

When building with Clang we encounter the following warning:
| drivers/net/wireless/mediatek/mt7601u/eeprom.c:193:5: error: format
| specifies type 'char' but the argument has type 'int' [-Werror,-Wformat]
| chan_bounds[idx].start + chan_bounds[idx].num - 1);

Variadic functions (printf-like) undergo default argument promotion.
Documentation/core-api/printk-formats.rst specifically recommends using
the promoted-to-type's format flag.

Moreover, C11 6.3.1.1 states:
(https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1548.pdf) `If an int
can represent all values of the original type ..., the value is
converted to an int; otherwise, it is converted to an unsigned int.
These are called the integer promotions.`

With this information in hand, we really should stop using `%hh[dxu]` or
`%h[dxu]` as they usually prompt Clang -Wformat warnings as well as go
against documented standard recommendations.

Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220709001527.618593-1-justinstitt@google.com

Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.

It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/2755b8b7d85a2db0663d39ea6df823f94f3401b3.1656939750.git.christophe.jaillet@wanadoo.fr

If an error occurs after a successful call to p54spi_request_firmware(), it
must be undone by a corresponding release_firmware() as already done in
the error handling path of p54spi_request_firmware() and in the .remove()
function.

Add the missing call in the error handling path and remove it from
p54spi_request_firmware() now that it is the responsibility of the caller
to release the firmware

Fixes: cd8d3d32 ("p54spi: p54spi driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/297d2547ff2ee627731662abceeab9dbdaf23231.1655068321.git.christophe.jaillet@wanadoo.fr

mt76 patches for 5.20

- preparation for new chipset support
- fixes
- VHT/HE related improvements
- ACPI SAR support

[kvalo@kernel.org: fix mac80211 API changes in start_ap() and stop_ap()]

Due to some changes and rebasing between different patches
this fell through the cracks; we need to set sta.mlo if the
connection is using MLO.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Unfortunately, a printk snuck into a previous patch,
remove it.

Fixes: 81151ce4 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

It might seem a bit pointless to do a multi-link operation
connection with just a single link, but this is already a
big change, so for now, limit MLO connections to a single
link.

Extending that to multiple links will require
 * work on parsing the multi-link element with STA profile
   properly, including element fragmentation;
 * checking the per-link status in the multi-link element
 * implementing logic to have active/inactive links to let
   drivers decide which links should be active;
 * implementing multicast RX deduplication;
 * and likely more.

For now this is still useful since it lets us do multi-link
connections for the purposes of testing APIs and the higher
layers such as wpa_supplicant.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Add the necessary API to parse the multi-link element in
the future. For now, link only to the element when found
so we can use it in the client-side code later.

Later, we'll need to fill this in to deal with element
fragmentation, parse the STA profile, etc.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Now that we have a pointer to the TX STA even when it's
not authenticated/... yet, fix the TX link selection in
hwsim to select only among the valid links for the STA,
requiring a STA pointer here. Also implement a simple
round-robin between links to make life more interesting.

While at it, also consider A3 when translating to link
addresses.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Use the link ID provided in TX frame metadata to select the correct
channel. For now, always select the link with the lowest link ID and
do some address translation.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Make mac80211_hwsim_sta_rc_update() iterate over all the STA links.

This is somewhat temporary, we really should add the link to the
API, but then hwsim still calls it internally and would need this.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In some cases, e.g. with Qualcomm devices and management
frames, or in hwsim, frames may be reported from the driver
with link addresses, but for decryption and matching needs
we really want to have them with MLD addresses. Support the
translation on RX.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When an MLO AP is transmitting to a non-MLO station, addr2 should be set
to a link address. This should be done before the frame is encrypted as
otherwise aad verification would fail. In case of software encryption
this can't be left for the device to handle, and should be done by
mac80211 when building the frame hdr.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When we create a station with a non-default link, then
we should have a link address, and we definitely need
to insert it into the link hash table on insertion.

Split the API into with and without link creation and
if it has a link, insert the link into the link hash
table on sta_info_insert().

Fixes: ba6ddab9 ("wifi: mac80211: maintain link-sta hash table")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In MLO, we need to transmit to another MLD and select
the link to it, which requires knowing the station.
But in TX, mac80211 will not give us a station that's
not added to the driver, which in the older add/remove
API is only done later.

Implement the new API in MLO so we know about the STA
at all times and get a pointer during TX as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>