The commit 51361684 ("block: remove superfluous calls to
blkcg_bio_issue_init") has removed blkcg_bio_issue_init from
__bio_clone since submit_bio will override ->bi_issue.
However, __blk_queue_split is called after blkcg_bio_issue_init
(see blk_mq_submit_bio) in submit_bio. In this case, the
->bi_issue is 0. Fix it.

Fixes: 51361684 ("block: remove superfluous calls to blkcg_bio_issue_init")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Link: https://lore.kernel.org/r/20220713140226.68135-1-songmuchun@bytedance.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 5.19

 - fix a block device naming collision (Israel Rukshin)
 - fix freeze accounting for PCI error handling (Keith Busch)"

* tag 'nvme-5.19-2022-07-14' of git://git.infradead.org/nvme:
  nvme: fix block device naming collision
  nvme-pci: fix freeze accounting for error handling

The issue exists when multipath is enabled and the namespace is
shared, but all the other controller checks at nvme_is_unique_nsid()
are false. The reason for this issue is that nvme_is_unique_nsid()
returns false when is called from nvme_mpath_alloc_disk() due to an
uninitialized value of head->shared. The patch fixes it by setting
head->shared before nvme_mpath_alloc_disk() is called.

Fixes: 5974ea7c ("nvme: allow duplicate NSIDs for private namespaces")
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

A reset on a live device experiencing a link error still needs to have
the queue freeze state started for the subsequent reinitialization. Skip
only the register read if the device is not present instead of bypassing
the freeze checks.

Fixes: b98235d3 ("nvme-pci: harden drive presence detect in nvme_dev_disable()")
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 5.19

 - another bogus identifier quirk (Keith Busch)
 - use struct group in the tracer to avoid a gcc warning (Keith Busch)"

* tag 'nvme-5.19-2022-07-07' of git://git.infradead.org/nvme:
  nvme: use struct group for generic command dwords
  nvme-pci: phison e16 has bogus namespace ids

This will allow the trace event to know the full size of the data
intended to be copied and silence read overflow checks.
Reported-by: John Garry <john.garry@huawei.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add the quirk.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216049Reported-by: Chris Egolf <cegolf@ugholf.net>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 5.19

 - more quirks (Lamarque Vieira Souza, Pablo Greco)
 - fix a fabrics disconnect regression (Ruozhu Li)
 - fix a nvmet-tcp data_digest calculation regression (Sagi Grimberg)
 - fix nvme-tcp send failure handling (Sagi Grimberg)
 - fix a regression with nvmet-loop and passthrough controllers
   (Alan Adamson)"

* tag 'nvme-5.19-2022-06-30' of git://git.infradead.org/nvme:
  nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA IM2P33F8ABR1
  nvmet: add a clear_ids attribute for passthru targets
  nvme: fix regression when disconnect a recovering ctrl
  nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG SX6000LNP (AKA SPECTRIX S40G)
  nvme-tcp: always fail a request when sending it failed
  nvmet-tcp: fix regression in data_digest calculation

ADATA IM2P33F8ABR1 reports bogus eui64 values that appear to be the same
across all drives. Quirk them out so they are not marked as "non globally
unique" duplicates.
Co-developed-by: Felipe de Jesus Araujo da Conceição <felipe.conceicao@petrosoftdesign.com>
Signed-off-by: Felipe de Jesus Araujo da Conceição <felipe.conceicao@petrosoftdesign.com>
Signed-off-by: Lamarque V. Souza <lamarque.souza@petrosoftdesign.com>

Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>

If the clear_ids attribute is set to true, the EUI/GUID/UUID is cleared
for the passthru target.  By default, loop targets will set clear_ids to
true.

This resolves an issue where a connect to a passthru target fails when
using a trtype of 'loop' because EUI/GUID/UUID is not unique.

Fixes: 2079f41e ("nvme: check that EUI/GUID/UUID are globally unique")
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

We encountered a problem that the disconnect command hangs.
After analyzing the log and stack, we found that the triggering
process is as follows:
CPU0                          CPU1
                                nvme_rdma_error_recovery_work
                                  nvme_rdma_teardown_io_queues
nvme_do_delete_ctrl                 nvme_stop_queues
  nvme_remove_namespaces
  --clear ctrl->namespaces
                                    nvme_start_queues
                                    --no ns in ctrl->namespaces
    nvme_ns_remove                  return(because ctrl is deleting)
      blk_freeze_queue
        blk_mq_freeze_queue_wait
        --wait for ns to unquiesce to clean infligt IO, hang forever

This problem was not found in older kernels because we will flush
err work in nvme_stop_ctrl before nvme_remove_namespaces.It does not
seem to be modified for functional reasons, the patch can be revert
to solve the problem.

Revert commit 794a4cb3 ("nvme: remove the .stop_ctrl callout")
Signed-off-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

ADATA XPG SPECTRIX S40G drives report bogus eui64 values that appear to
be the same across drives in one system. Quirk them out so they are
not marked as "non globally unique" duplicates.

Before:
[    2.258919] nvme nvme1: pci function 0000:06:00.0
[    2.264898] nvme nvme2: pci function 0000:05:00.0
[    2.323235] nvme nvme1: failed to set APST feature (2)
[    2.326153] nvme nvme2: failed to set APST feature (2)
[    2.333935] nvme nvme1: allocated 64 MiB host memory buffer.
[    2.336492] nvme nvme2: allocated 64 MiB host memory buffer.
[    2.339611] nvme nvme1: 7/0/0 default/read/poll queues
[    2.341805] nvme nvme2: 7/0/0 default/read/poll queues
[    2.346114]  nvme1n1: p1
[    2.347197] nvme nvme2: globally duplicate IDs for nsid 1
After:
[    2.427715] nvme nvme1: pci function 0000:06:00.0
[    2.427771] nvme nvme2: pci function 0000:05:00.0
[    2.488154] nvme nvme2: failed to set APST feature (2)
[    2.489895] nvme nvme1: failed to set APST feature (2)
[    2.498773] nvme nvme2: allocated 64 MiB host memory buffer.
[    2.500587] nvme nvme1: allocated 64 MiB host memory buffer.
[    2.504113] nvme nvme2: 7/0/0 default/read/poll queues
[    2.507026] nvme nvme1: 7/0/0 default/read/poll queues
[    2.509467] nvme nvme2: Ignoring bogus Namespace Identifiers
[    2.512804] nvme nvme1: Ignoring bogus Namespace Identifiers
[    2.513698]  nvme1n1: p1
Signed-off-by: Pablo Greco <pgreco@centosproject.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

queue stoppage and inflight requests cancellation is fully fenced from
io_work and thus failing a request from this context. Hence we don't
need to try to guess from the socket retcode if this failure is because
the queue is about to be torn down or not.

We are perfectly safe to just fail it, the request will not be cancelled
later on.

This solves possible very long shutdown delays when the users issues a
'nvme disconnect-all'
Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Data digest calculation iterates over command mapped iovec. However
since commit bac04454 we unmap the iovec before we handle the data
digest, and since commit 69b85e1f we clear nr_mapped when we unmap
the iov.

Instead of open-coding the command iov traversal, simply call
crypto_ahash_digest with the command sg that is already allocated (we
already do that for the send path). Rename nvmet_tcp_send_ddgst to
nvmet_tcp_calc_ddgst and call it from send and recv paths.

Fixes: 69b85e1f ("nvmet-tcp: add an helper to free the cmd buffers")
Fixes: bac04454 ("nvmet-tcp: fix kmap leak when data digest in use")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

1. Getting next index before continue branch.
2. Checking free bits when setting the target bits. Otherwise,
it may reuse the busying bits.
Signed-off-by: wuchi <wuchi.zero@gmail.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Link: https://lore.kernel.org/r/20220605145835.26916-1-wuchi.zero@gmail.com
Fixes: 9672b0d4 ("sbitmap: add __sbitmap_queue_get_batch()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 5.19

 - fix the mixed up CRIMS/CRWMS constants (Joel Granados)
 - add another broken identifier quirk (Leo Savernik)
 - fix up a quirk because Samsung reuses PCI IDs over different products
   (Christoph Hellwig)"

* tag 'nvme-5.19-2022-06-23' of git://git.infradead.org/nvme:
  nvme: move the Samsung X5 quirk entry to the core quirks
  nvme: fix the CRIMS and CRWMS definitions to match the spec
  nvme: add a bogus subsystem NQN quirk for Micron MTFDKBA2T0TFH

Since commit 83cbce95("block: add error handling for device_add_disk /
add_disk"), bdev->bd_holder_dir can not be empty now, so remove WARN_ON()
from bd_link_disk_holder.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074100.2251301-1-linan122@huawei.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This device shares the PCI ID with the Samsung 970 Evo Plus that
does not need or want the quirks.  Move the the quirk entry to the
core table based on the model number instead.

Fixes: bc360b0b ("nvme-pci: add quirks for Samsung X5 SSDs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>

Adjust the values of NVME_CAP_CRMS_CRIMS and NVME_CAP_CRMS_CRWMS masks as
they are different from the ones in TP4084 - Time-to-ready.

Fixes: 354201c5 ("nvme: add support for TP4084 - Time-to-Ready Enhancements").
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The Micron MTFDKBA2T0TFH device reports the same subsysem NQN for
all devices.  Add a quick to ignore it.
Signed-off-by: Leo Savernik <l.savernik@aon.at>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

If rq_qos_throttle() ends up blocking, then we will have invalidated and
flushed our current plug. Since blk_mq_get_cached_request() hasn't
popped the cached request off the plug list just yet, we end holding a
pointer to a request that is no longer valid. This insta-crashes with
rq->mq_hctx being NULL in the validity checks just after.

Pop the request off the cached list before doing rq_qos_throttle() to
avoid using a potentially stale request.

Fixes: 0a5aa8d1 ("block: fix blk_mq_attempt_bio_merge and rq_qos_throttle protection")
Reported-by: Dylan Yudaken <dylany@fb.com>
Tested-by: Dylan Yudaken <dylany@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The request queue pointer in struct blk_independent_access_range is
unused. Remove it.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Fixes: 41e46b3c ("block: Fix potential deadlock in blk_ia_range_sysfs_show()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220603053529.76405-1-damien.lemoal@opensource.wdc.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Freeze the queue earlier in del_gendisk so that the state does not
change while we remove debugfs and sysfs files.

Ming mentioned that being able to observer request in debugfs might
be useful while the queue is being frozen in del_gendisk, which is
made possible by this change.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220614074827.458955-5-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

The block debugfs files are created in blk_register_queue, which is
called by add_disk and use a naming scheme based on the disk_name.
After del_gendisk returns that name can be reused and thus we must not
leave these debugfs files around, otherwise the kernel is unhappy
and spews messages like:

	Directory XXXXX with parent 'block' already present!

and the newly created devices will not have working debugfs files.

Move the unregistration to blk_unregister_queue instead (which matches
the sysfs unregistration) to make sure the debugfs life time rules match
those of the disk name.

As part of the move also make sure the whole debugfs unregistration is
inside a single debugfs_mutex critical section.

Note that this breaks blktests block/002, which checks that the debugfs
directory has not been removed while blktests is running, but that
particular check should simply be removed from the test case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220614074827.458955-4-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Various places like I/O schedulers or the QOS infrastructure try to
register debugfs files on demans, which can race with creating and
removing the main queue debugfs directory.  Use the existing
debugfs_mutex to serialize all debugfs operations that rely on
q->debugfs_dir or the directories hanging off it.

To make the teardown code a little simpler declare all debugfs dentry
pointers and not just the main one uncoditionally in blkdev.h.

Move debugfs_mutex next to the dentries that it protects and document
what it is used for.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220614074827.458955-3-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

The elevator is only used for file system requests, which are stopped in
del_gendisk.  Move disabling the elevator and freeing the scheduler tags
to the end of del_gendisk instead of doing that work in disk_release and
blk_cleanup_queue to avoid a use after free on q->tag_set from
disk_release as the tag_set might not be alive at that point.

Move the blk_qos_exit call as well, as it just depends on the elevator
exit and would be the only reason to keep the not exactly cheap queue
freeze in disk_release.

Fixes: e155b0c2 ("blk-mq: Use shared tags for shared sbitmap support")
Reported-by: syzbot+3e3f419f4a7816471838@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: syzbot+3e3f419f4a7816471838@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20220614074827.458955-2-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

BFQ uses io_start_time_ns. That member variable is only set if I/O
statistics are enabled. Hence this patch that enables I/O statistics
at the time BFQ is associated with a request queue.

Compile-tested only.
Reported-by: Cixi Geng <cixi.geng1@unisoc.com>
Cc: Cixi Geng <cixi.geng1@unisoc.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Paolo Valente <paolo.valente@unimore.it>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

commit 364b6181 ("blk-mq: clearing flush request reference in
tags->rqs[]") is added to clear the to-be-free flush request from
tags->rqs[] for avoiding use-after-free on the flush rq.

Yu Kuai reported that blk_mq_clear_flush_rq_mapping() slows down boot time
by ~8s because running scsi probe which may create and remove lots of
unpresent LUNs on megaraid-sas which uses BLK_MQ_F_TAG_HCTX_SHARED and
each request queue has lots of hw queues.

Improve the situation by not running blk_mq_clear_flush_rq_mapping if
disk isn't added when there can't be any flush request issued.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220616014401.817001-4-ming.lei@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

q->elevator is referred in blk_mq_has_sqsched() without any protection,
no .q_usage_counter is held, no queue srcu and rcu read lock is held,
so potential use-after-free may be triggered.

Fix the issue by adding one queue flag for checking if the elevator
uses single queue style dispatch. Meantime the elevator feature flag
of ELEVATOR_F_MQ_AWARE isn't needed any more.

Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220616014401.817001-3-ming.lei@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

elevator can be tore down by sysfs switch interface or disk release, so
hold ->sysfs_lock before referring to q->elevator, then potential
use-after-free can be avoided.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220616014401.817001-2-ming.lei@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This patch prevents that test nvme/004 triggers the following:

UBSAN: array-index-out-of-bounds in block/blk-mq.h:135:9
index 512 is out of range for type 'long unsigned int [512]'
Call Trace:
 show_stack+0x52/0x58
 dump_stack_lvl+0x49/0x5e
 dump_stack+0x10/0x12
 ubsan_epilogue+0x9/0x3b
 __ubsan_handle_out_of_bounds.cold+0x44/0x49
 blk_mq_alloc_request_hctx+0x304/0x310
 __nvme_submit_sync_cmd+0x70/0x200 [nvme_core]
 nvmf_connect_io_queue+0x23e/0x2a0 [nvme_fabrics]
 nvme_loop_connect_io_queues+0x8d/0xb0 [nvme_loop]
 nvme_loop_create_ctrl+0x58e/0x7d0 [nvme_loop]
 nvmf_create_ctrl+0x1d7/0x4d0 [nvme_fabrics]
 nvmf_dev_write+0xae/0x111 [nvme_fabrics]
 vfs_write+0x144/0x560
 ksys_write+0xb7/0x140
 __x64_sys_write+0x42/0x50
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Fixes: 20e4d813 ("blk-mq: simplify queue mapping & schedule with each possisble CPU")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220615210004.1031820-1-bvanassche@acm.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull MD fixes from Song.

* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md/raid5-ppl: Fix argument order in bio_alloc_bioset()
  Revert "md: don't unregister sync_thread with reconfig_mutex held"

bio_alloc_bioset() takes a block device, number of vectors, the
OP flags, the GFP mask and the bio set. However when the prototype
was changed, the callisite in ppl_do_flush() had the OP flags and
the GFP flags reversed. This introduced some sparse error:

  drivers/md/raid5-ppl.c:632:57: warning: incorrect type in argument 3
				    (different base types)
  drivers/md/raid5-ppl.c:632:57:    expected unsigned int opf
  drivers/md/raid5-ppl.c:632:57:    got restricted gfp_t [usertype]
  drivers/md/raid5-ppl.c:633:61: warning: incorrect type in argument 4
  				    (different base types)
  drivers/md/raid5-ppl.c:633:61:    expected restricted gfp_t [usertype]
				    gfp_mask
  drivers/md/raid5-ppl.c:633:61:    got unsigned long long

The sparse error introduction may not have been reported correctly by
0day due to other work that was cleaning up other sparse errors in this
area.

Fixes: 609be106 ("block: pass a block_device and opf to bio_alloc_bioset")
Cc: stable@vger.kernel.org # 5.18+
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>

The 07reshape5intr test is broke because of below path.

    md_reap_sync_thread
            -> mddev_unlock
            -> md_unregister_thread(&mddev->sync_thread)

And md_check_recovery is triggered by,

mddev_unlock -> md_wakeup_thread(mddev->thread)

then mddev->reshape_position is set to MaxSector in raid5_finish_reshape
since MD_RECOVERY_INTR is cleared in md_check_recovery, which means
feature_map is not set with MD_FEATURE_RESHAPE_ACTIVE and superblock's
reshape_position can't be updated accordingly.

Fixes: 8b48ec23 ("md: don't unregister sync_thread with reconfig_mutex held")
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 5.19

 - quirks, quirks, quirks to work around buggy consumer grade devices
   (Keith Bush, Ning Wang, Stefan Reiter, Rasheed Hsueh)
 - better kernel messages for devices that need quirking (Keith Bush)
 - make a kernel message more useful (Thomas Weißschuh)"

* tag 'nvme-5.19-2022-06-15' of git://git.infradead.org/nvme:
  nvme-pci: disable write zeros support on UMIC and Samsung SSDs
  nvme-pci: avoid the deepest sleep state on ZHITAI TiPro7000 SSDs
  nvme-pci: sk hynix p31 has bogus namespace ids
  nvme-pci: smi has bogus namespace ids
  nvme-pci: phison e12 has bogus namespace ids
  nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S50
  nvme-pci: add trouble shooting steps for timeouts
  nvme: add bug report info for global duplicate id
  nvme: add device name to warning in uuid_show()

Like commit 5611ec2b ("nvme-pci: prevent SK hynix PC400 from using
Write Zeroes command"), UMIS and Samsung has the same issue:
[ 6305.633887] blk_update_request: operation not supported error,
dev nvme0n1, sector 340812032 op 0x9:(WRITE_ZEROES) flags 0x0
phys_seg 0 prio class 0

So also disable Write Zeroes command on UMIS and Samsung.
Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

When ZHITAI TiPro7000 SSDs entered deepest power state(ps4)
it has the same APST sleep problem as Kingston A2000.
by chance the system crashes and displays the same dmesg info:

https://bugzilla.kernel.org/show_bug.cgi?id=195039#c65

As the Archlinux wiki suggest (enlat + exlat) < 25000 is fine
and my testing shows no system crashes ever since.
Therefore disabling the deepest power state will fix the APST sleep issue.

https://wiki.archlinux.org/title/Solid_state_drive/NVMe

This is the APST data from 'nvme id-ctrl /dev/nvme1'

NVME Identify Controller:
vid       : 0x1e49
ssvid     : 0x1e49
sn        : [...]
mn        : ZHITAI TiPro7000 1TB
fr        : ZTA32F3Y
[...]
ps    0 : mp:3.50W operational enlat:5 exlat:5 rrt:0 rrl:0
          rwt:0 rwl:0 idle_power:- active_power:-
ps    1 : mp:3.30W operational enlat:50 exlat:100 rrt:1 rrl:1
          rwt:1 rwl:1 idle_power:- active_power:-
ps    2 : mp:2.80W operational enlat:50 exlat:200 rrt:2 rrl:2
          rwt:2 rwl:2 idle_power:- active_power:-
ps    3 : mp:0.1500W non-operational enlat:500 exlat:5000 rrt:3 rrl:3
          rwt:3 rwl:3 idle_power:- active_power:-
ps    4 : mp:0.0200W non-operational enlat:2000 exlat:60000 rrt:4 rrl:4
          rwt:4 rwl:4 idle_power:- active_power:-
Signed-off-by: Ning Wang <ningwang35@outlook.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add the quirk.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216049Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add the quirk.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216096Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Add the quirk.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216049Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>