- 08 May, 2015 40 commits
-
-
Edward Lipinsky authored
This patch fixes the checkpatch.pl error: ERROR: trailing whitespace Signed-off-by:
Edward Lipinsky <ellipinsky@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wei Yongjun authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Phong Tran authored
The driver has to unregister from platform device when it's unloaded Signed-off-by:
Phong Tran <tranmanphong@gmail.com> Signed-off-by:
-
Phong Tran authored
Add the remove() method for deregister from misc device when it's unloaded. Signed-off-by:
-
Mateusz Kulikowski authored
rtl8192_pci_findadapter() was looking for invalid DeviceID (0x8172), instead of proper for rtl8192e/se devices (0x8192) Signed-off-by:
Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Signed-off-by:
-
Mateusz Kulikowski authored
Separate parts of dm_TXPowerTrackingCallback_TSSI() into two new functions: - dm_tx_update_tssi_weak_signal() - dm_tx_update_tssi_strong_signal() Signed-off-by:
-
Mateusz Kulikowski authored
- Replace ?: with min_t - Remove condition that is always true Signed-off-by:
-
Mateusz Kulikowski authored
Trivial fix - add newline in dm_InitializeTXPowerTracking_TSSI() Signed-off-by:
-
Mateusz Kulikowski authored
r8192_priv structure had 2 big arrays with tx gain register values: - cck_txbbgain_table - cck_txbbgain_ch14_table - txbbgain_table This arrays were read-only - filled in driver init code and look like firmware/chip-specific. This patch removes them from r8192_priv and puts them in (global) variables. tx_bb_gain is also flattened - register values are stored in array; Amplification value can be calculated using dm_tx_bb_gain_idx_to_amplify(). Signed-off-by:
-
Mateusz Kulikowski authored
Fix several SPACING errors to make checkpatch happy. Signed-off-by:
-
Mateusz Kulikowski authored
This file is not used and its contents are duplicated in r8192E_phyreg.h. Signed-off-by:
-
Mateusz Kulikowski authored
Both files have the same contents (with the exception of comments). One of them will not survive future commits. Signed-off-by:
-
Mateusz Kulikowski authored
Reformat r8192E_phyreg.h to make checkpatch happy. Signed-off-by:
-
Nickolaus Woodruff authored
This patch fixes the following sparse warnings in r8192U_core.c: CHECK drivers/staging/rtl8192u/r8192U_core.c drivers/staging/rtl8192u/r8192U_core.c:3212:6: warning: symbol 'rtl819x_watchdog_wqcallback' was not declared. Should it be static? drivers/staging/rtl8192u/r8192U_core.c:3276:6: warning: symbol 'watch_dog_timer_callback' was not declared. Should it be static? drivers/staging/rtl8192u/r8192U_core.c:3282:5: warning: symbol '_rtl8192_up' was not declared. Should it be static? drivers/staging/rtl8192u/r8192U_core.c:3333:5: warning: symbol 'rtl8192_close' was not declared. Should it be static? drivers/staging/rtl8192u/r8192U_core.c:3406:6: warning: symbol 'rtl8192_restart' was not declared. Should it be static? drivers/staging/rtl8192u/r8192U_core.c:4618:6: warning: symbol 'rtl8192_irq_rx_tasklet' was not declared. Should it be static? drivers/staging/rtl8192u/r8192U_core.c:4736:6: warning: symbol 'rtl8192_cancel_deferred_work' was not declared. Should it be static? Signed-off-by:
Nickolaus Woodruff <nickolauswoodruff@gmail.com> Signed-off-by:
-
Ian Abbott authored
Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Reviewed-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
Ian Abbott authored
Reformat some function declarations to avoid bunching up near column 80. Also add a blank line after a `struct` definition. Signed-off-by:
-
Ian Abbott authored
Use the usual style for block comments. Squash double spaces after comment opening sequences. Signed-off-by:
-
Ian Abbott authored
Use the usual style for block comments. Squash double spaces after comment opening sequences. Signed-off-by:
-
Ian Abbott authored
"mite.h" relies on a lot of things declared including "../comedi_pci.h", but doesn't need anything in "../comedi_pci.h" itself. None of the Comedi modules that include "mite.h" rely on it to include "../comedi_pci.h" on their behalf. Remove the inclusion of "../comedi_pci.h" from "mite.h", and add enough other includes and (incomplete) `struct` declarations to make it compile without warnings or errors even when included first in a .c file. Signed-off-by:
-
Ian Abbott authored
The definition of the macro `USE_KMALLOC` is commented out, and nothing refers to it. Remove the commented out macro. Signed-off-by:
-
Ian Abbott authored
The macro `PCIMIO_COMPAT` is defined, but never used. Remove it. Signed-off-by:
-
Ian Abbott authored
The Comedi driver modules build fine if the inclusion of <linux/slab.h> is removed from "mite.h", so remove it. However, since "mite.c" calls `kzalloc()`, include <linux/slab.h> there. Signed-off-by:
-
Giedrius Statkevičius authored
count doesn't get changed in between identical checks in dgnc_tty_write() so remove the second check Signed-off-by:
Giedrius Statkevičius <giedrius.statkevicius@gmail.com> Signed-off-by:
-
Giedrius Statkevičius authored
Remove the dead code protected by in_user in dgnc_tty_write() because it is set to 0 and never changed to 1 thus the code in ifs never gets executed. Signed-off-by:
-
Mitchel Humpherys authored
We're currently printing to the kernel log at `info' level when we successfully create the chunk heap, but success messages should be done at `debug' level. Fix this. Signed-off-by:
Mitchel Humpherys <mitchelh@codeaurora.org> Signed-off-by:
-
Giedrius Statkevičius authored
Remove checks that are redundant since we don't have boards with partially initialized ->channels[i]. Signed-off-by:
-
Giedrius Statkevičius authored
Add a check if ->channels[i] is NULL because a NULL pointer may be dereferenced in case one of the allocations failed Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Giedrius Statkevičius authored
Check if kzalloc fails in dgnc_tty_init() and if it does then free all previously allocated ->channels[i] and set them to NULL. This makes the code less error/bug prone because instead of needing programmers attention to add checks everywhere we do that in one place. Also, remove a bogus comment and check in the same loop because ->channels[i] isn't allocated anywhere else. Finally, remove a unnecessary check if ->channels[i] is NULL in the next loop because it can't be. Signed-off-by:
-
Robin Karlsson authored
Fixed spelling error in TODO. Signed-off-by:
Robin Karlsson <s.r.karlsson@gmail.com> Signed-off-by:
-
Amitoj Kaur Chawla authored
Fixed error by removing space after open parenthesis '(' Problem found using checkpatch.pl ERROR: space prohibited after that open parenthesis '(' Signed-off-by:Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by:
-
Giedrius Statkevičius authored
Remove some dead code that will never be executed or which serves no purpose Signed-off-by:
-
Carlos E. Garcia authored
Fixed multiple spelling errors. Signed-off-by:
Carlos E. Garcia <carlos@cgarcia.org> Signed-off-by:
-
Tolga Ceylan authored
To fix sparse warning of incorrect type in assignment (different address space), added annotation __iomem to vmem8 and modified direct reads with ioread8(). Signed-off-by:
Tolga Ceylan <tolga.ceylan@gmail.com> Signed-off-by:
-
Julia Lawall authored
Replace OBD_CPT_ALLOC, OBD_CPT_ALLOC_PTR, and OBD_CPT_ALLOC_GFP by corresponding calls to kzalloc_node. The semantic patch for the OBD_CPT_ALLOC case is as follows: (http://coccinelle.lip6.fr/). // <smpl> @@ expression ptr,cptab,cpt,size; @@ - OBD_CPT_ALLOC(ptr, cptab, cpt, size) + ptr = kzalloc_node(size, GFP_NOFS, cfs_cpt_spread_node(cptab, cpt)) // </smpl> Note that the original OBD macros would check if the cptab argument was NULL and fall back on kzalloc in that case. Oleg Drokin argues that this test is not needed because the code containing these calls is only invoked after initialization has been completed, in which case the possible cptab arguments are not NULL. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
Replace OBD_CPT_ALLOC, OBD_CPT_ALLOC_PTR, and OBD_CPT_ALLOC_GFP by corresponding calls to kzalloc_node. The semantic patch for the OBD_CPT_ALLOC case is as follows: (http://coccinelle.lip6.fr/). // <smpl> @@ expression ptr,cptab,cpt,size; @@ - OBD_CPT_ALLOC(ptr, cptab, cpt, size) + ptr = kzalloc_node(size, GFP_NOFS, cfs_cpt_spread_node(cptab, cpt)) // </smpl> Note that the original OBD macros would check if the cptab argument was NULL and fall back on kzalloc in that case. Oleg Drokin argues that this test is not needed because the code containing these calls is only invoked after initialization has been completed, in which case the possible cptab arguments are not NULL. Signed-off-by:
-
Julia Lawall authored
Replace OBD_CPT_ALLOC, OBD_CPT_ALLOC_PTR, and OBD_CPT_ALLOC_GFP by corresponding calls to kzalloc_node. The semantic patch for the OBD_CPT_ALLOC case is as follows: (http://coccinelle.lip6.fr/). // <smpl> @@ expression ptr,cptab,cpt,size; @@ - OBD_CPT_ALLOC(ptr, cptab, cpt, size) + ptr = kzalloc_node(size, GFP_NOFS, cfs_cpt_spread_node(cptab, cpt)) // </smpl> Note that the original OBD macros would check if the cptab argument was NULL and fall back on kzalloc in that case. Oleg Drokin argues that this test is not needed because the code containing these calls is only invoked after initialization has been completed, in which case the possible cptab arguments are not NULL. Signed-off-by:
-
Julia Lawall authored
Kfree can cope with a null argument, so drop null tests. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression ptr; @@ - if (ptr != NULL) kfree(ptr); @@ expression ptr; @@ - if (ptr != NULL) { kfree(ptr); ptr = NULL; - } // </smpl> In the first case, specific labels are introduced to free only what is needed. Signed-off-by:
-
Julia Lawall authored
Kfree can cope with a null argument, so drop null tests. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression ptr; @@ - if (ptr != NULL) kfree(ptr); // </smpl> Signed-off-by:
-
Julia Lawall authored
Kfree can cope with a null argument, so drop null tests. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression ptr; @@ - if (ptr != NULL) kfree(ptr); // </smpl> In the first case, the only cleanup needed is the unlock, so jump to that directly. Likewise, in the first two failure cases of ptlrpc_lprocfs_nrs_seq_write, no cleanup is needed, so just drop the goto and return directly. Signed-off-by:
-
Julia Lawall authored
Kfree can cope with a null argument, so drop null tests. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression ptr; @@ - if (ptr != NULL) kfree(ptr); // </smpl> Signed-off-by:
-
