Skip to content

L
linux
Switch branch/tag
  1. 10 Apr, 2024 8 commits
  3. 09 Apr, 2024 24 commits
  5. 08 Apr, 2024 8 commits
    • Bjorn Helgaas's avatar
      igc: Remove redundant runtime resume for ethtool ops · 75f16e06
      Bjorn Helgaas authored 
      8c5ad0da ("igc: Add ethtool support") added ethtool_ops.begin() and
.complete(), which used pm_runtime_get_sync() to resume suspended devices
before any ethtool_ops callback and allow suspend after it completed.

Subsequently, f32a2137 ("ethtool: runtime-resume netdev parent before
ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
so the device is resumed before any ethtool_ops callback even if the driver
didn't supply a .begin() callback.

Remove the .begin() and .complete() callbacks, which are now redundant
because dev_ethtool() already resumes the device.
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: default avatarSimon Horman <horms@kernel.org>
Tested-by: default avatarNaama Meir <naamax.meir@linux.intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      75f16e06
    • Bjorn Helgaas's avatar
      igb: Remove redundant runtime resume for ethtool_ops · 461359c4
      Bjorn Helgaas authored 
      749ab2cd ("igb: add basic runtime PM support") added
ethtool_ops.begin() and .complete(), which used pm_runtime_get_sync() to
resume suspended devices before any ethtool_ops callback and allow suspend
after it completed.

Subsequently, f32a2137 ("ethtool: runtime-resume netdev parent before
ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
so the device is resumed before any ethtool_ops callback even if the driver
didn't supply a .begin() callback.

Remove the .begin() and .complete() callbacks, which are now redundant
because dev_ethtool() already resumes the device.
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: default avatarSimon Horman <horms@kernel.org>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      461359c4
    • Bjorn Helgaas's avatar
      e1000e: Remove redundant runtime resume for ethtool_ops · b2c28941
      Bjorn Helgaas authored 
      e60b22c5 ("e1000e: fix accessing to suspended device") added
ethtool_ops.begin() and .complete(), which used pm_runtime_get_sync() to
resume suspended devices before any ethtool_ops callback and allow suspend
after it completed.

3ef672ab ("e1000e: ethtool unnecessarily takes device out of RPM
suspend") removed ethtool_ops.begin() and .complete() and instead did
pm_runtime_get_sync() only in the individual ethtool_ops callbacks that
access device registers.

Subsequently, f32a2137 ("ethtool: runtime-resume netdev parent before
ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
so the device is resumed before *any* ethtool_ops callback, as it was
before 3ef672ab.

Remove most runtime resumes from ethtool_ops, which are now redundant
because the resume has already been done by dev_ethtool().  This is
essentially a revert of 3ef672ab ("e1000e: ethtool unnecessarily takes
device out of RPM suspend").

There are a couple subtleties:

  - Prior to 3ef672ab, the device was resumed only for the duration of
    a single ethtool callback.  3ef672ab changed e1000_set_phys_id() so
    the device was resumed for ETHTOOL_ID_ACTIVE and remained resumed until
    a subsequent callback for ETHTOOL_ID_INACTIVE.  Preserve that part of
    3ef672ab so the device will not be runtime suspended while in the
    ETHTOOL_ID_ACTIVE state.

  - 3ef672ab added "if (!pm_runtime_suspended())" in before reading the
    STATUS register in e1000_get_settings().  This was racy and is now
    unnecessary because dev_ethtool() has resumed the device already, so
    revert that.
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: default avatarSimon Horman <horms@kernel.org>
Tested-by: default avatarNaama Meir <naamax.meir@linux.intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      b2c28941
    • Heiner Kallweit's avatar
      r8169: add support for RTL8168M · 39f59c72
      Heiner Kallweit authored 
      A user reported an unknown chip version. According to the r8168 vendor
driver it's called RTL8168M, but handling is identical to RTL8168H.
So let's simply treat it as RTL8168H.
Tested-by: default avatarЕвгений <octobergun@gmail.com>
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      39f59c72
    • David S. Miller's avatar
      Merge branch 'devlink-io-eqs' · 358961f5
      David S. Miller authored 
      Parav Pandit says:

====================
devlink: Add port function attribute for IO EQs

Currently, PCI SFs and VFs use IO event queues to deliver netdev per
channel events. The number of netdev channels is a function of IO
event queues. In the second scenario of an RDMA device, the
completion vectors are also a function of IO event queues. Currently, an
administrator on the hypervisor has no means to provision the number
of IO event queues for the SF device or the VF device. Device/firmware
determines some arbitrary value for these IO event queues. Due to this,
the SF netdev channels are unpredictable, and consequently, the
performance is too.

This short series introduces a new port function attribute: max_io_eqs.
The goal is to provide administrators at the hypervisor level with the
ability to provision the maximum number of IO event queues for a
function. This gives the control to the administrator to provision
right number of IO event queues and have predictable performance.

Examples of when an administrator provisions (set) maximum number of
IO event queues when using switchdev mode:

  $ devlink port show pci/0000:06:00.0/1
      pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
          function:
          hw_addr 00:00:00:00:00:00 roce enable max_io_eqs 10

  $ devlink port function set pci/0000:06:00.0/1 max_io_eqs 20

  $ devlink port show pci/0000:06:00.0/1
      pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
          function:
          hw_addr 00:00:00:00:00:00 roce enable max_io_eqs 20

This sets the corresponding maximum IO event queues of the function
before it is enumerated. Thus, when the VF/SF driver reads the
capability from the device, it sees the value provisioned by the
hypervisor. The driver is then able to configure the number of channels
for the net device, as well as the number of completion vectors
for the RDMA device. The device/firmware also honors the provisioned
value, hence any VF/SF driver attempting to create IO EQs
beyond provisioned value results in an error.

With above setting now, the administrator is able to achieve the 2x
performance on SFs with 20 channels. In second example when SF was
provisioned for a container with 2 cpus, the administrator provisioned only
2 IO event queues, thereby saving device resources.

With the above settings now in place, the administrator achieved 2x
performance with the SF device with 20 channels. In the second example,
when the SF was provisioned for a container with 2 CPUs, the administrator
provisioned only 2 IO event queues, thereby saving device resources.

changelog:
v2->v3:
- limited to 80 chars per line in devlink
- fixed comments from Jakub in mlx5 driver to fix missing mutex unlock
  on error path
v1->v2:
- limited comment to 80 chars per line in header file
- fixed set function variables for reverse christmas tree
- fixed comments from Kalesh
- fixed missing kfree in get call
- returning error code for get cmd failure
- fixed error msg copy paste error in set on cmd failure
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      358961f5
    • Parav Pandit's avatar
      mlx5/core: Support max_io_eqs for a function · 93197c7c
      Parav Pandit authored 
      Implement get and set for the maximum IO event queues for SF and VF.
This enables administrator on the hypervisor to control the maximum
IO event queues which are typically used to derive the maximum and
default number of net device channels or rdma device completion vectors.
Reviewed-by: default avatarShay Drory <shayd@nvidia.com>
Signed-off-by: default avatarParav Pandit <parav@nvidia.com>
Reviewed-by: default avatarJiri Pirko <jiri@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      93197c7c
    • Parav Pandit's avatar
      devlink: Support setting max_io_eqs · 5af3e387
      Parav Pandit authored 
      Many devices send event notifications for the IO queues,
such as tx and rx queues, through event queues.

Enable a privileged owner, such as a hypervisor PF, to set the number
of IO event queues for the VF and SF during the provisioning stage.

example:
Get maximum IO event queues of the VF device::

  $ devlink port show pci/0000:06:00.0/2
  pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
      function:
          hw_addr 00:00:00:00:00:00 ipsec_packet disabled max_io_eqs 10

Set maximum IO event queues of the VF device::

  $ devlink port function set pci/0000:06:00.0/2 max_io_eqs 32

  $ devlink port show pci/0000:06:00.0/2
  pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
      function:
          hw_addr 00:00:00:00:00:00 ipsec_packet disabled max_io_eqs 32
Reviewed-by: default avatarJiri Pirko <jiri@nvidia.com>
Reviewed-by: default avatarShay Drory <shayd@nvidia.com>
Signed-off-by: default avatarParav Pandit <parav@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5af3e387
    • Eric Dumazet's avatar
      net: display more skb fields in skb_dump() · 4308811b
      Eric Dumazet authored 
      Print these additional fields in skb_dump() to ease debugging.

- mac_len
- csum_start (in v2, at Willem suggestion)
- csum_offset (in v2, at Willem suggestion)
- priority
- mark
- alloc_cpu
- vlan_all
- encapsulation
- inner_protocol
- inner_mac_header
- inner_network_header
- inner_transport_header
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Reviewed-by: default avatarWillem de Bruijn <willemb@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4308811b
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7