Currently, arch_stack_walk() can only get the full stack information
including NMI.  This is because the implementation of arch_stack_walk()
is forced to ignore the information passed by the regs parameter and use
the current stack information instead.

For some detection systems like KFENCE, only partial stack information
is needed.  In particular, the stack frame where the interrupt occurred.

To support KFENCE, this patch modifies the implementation of the
arch_stack_walk() function so that if this function is called with the
regs argument passed, it retains all the stack information in regs and
uses it to provide accurate information.

Before this patch:
[    1.531195 ] ==================================================================
[    1.531442 ] BUG: KFENCE: out-of-bounds read in stack_trace_save_regs+0x48/0x6c
[    1.531442 ]
[    1.531900 ] Out-of-bounds read at 0xffff800012267fff (1B left of kfence-#12):
[    1.532046 ]  stack_trace_save_regs+0x48/0x6c
[    1.532169 ]  kfence_report_error+0xa4/0x528
[    1.532276 ]  kfence_handle_page_fault+0x124/0x270
[    1.532388 ]  no_context+0x50/0x94
[    1.532453 ]  do_page_fault+0x1a8/0x36c
[    1.532524 ]  tlb_do_page_fault_0+0x118/0x1b4
[    1.532623 ]  test_out_of_bounds_read+0xa0/0x1d8
[    1.532745 ]  kunit_generic_run_threadfn_adapter+0x1c/0x28
[    1.532854 ]  kthread+0x124/0x130
[    1.532922 ]  ret_from_kernel_thread+0xc/0xa4
<snip>

After this patch:
[    1.320220 ] ==================================================================
[    1.320401 ] BUG: KFENCE: out-of-bounds read in test_out_of_bounds_read+0xa8/0x1d8
[    1.320401 ]
[    1.320898 ] Out-of-bounds read at 0xffff800012257fff (1B left of kfence-#10):
[    1.321134 ]  test_out_of_bounds_read+0xa8/0x1d8
[    1.321264 ]  kunit_generic_run_threadfn_adapter+0x1c/0x28
[    1.321392 ]  kthread+0x124/0x130
[    1.321459 ]  ret_from_kernel_thread+0xc/0xa4
<snip>
Suggested-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

According to LoongArch documentations, there are two types of address
translation modes: direct mapped address translation mode (DMW mode) and
page table mapped address translation mode (TLB mode).

Currently, virt_to_page() only supports direct mapped mode. This patch
determines which mode is used, and adds corresponding handling functions
for both modes.

For more details on the two modes, see [1].

[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#virtual-address-space-and-address-translation-modeSigned-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The LoongArch architecture is different from other architectures. It
needs to update __kfence_pool during arch_kfence_init_pool().

This patch modifies the assignment location of the local variable addr
in the kfence_init_pool() function to support the case of updating
__kfence_pool in arch_kfence_init_pool().
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add ARCH_HAS_KCOV and HAVE_GCC_PLUGINS to the LoongArch Kconfig. And
also disable instrumentation of vdso.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Provide kaslr_offset() to get the kernel offset when KASLR is enabled.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

KGDB is intended to be used as a source level debugger for the Linux
kernel. It is used along with gdb to debug a Linux kernel. GDB can be
used to "break in" to the kernel to inspect memory, variables and regs
similar to the way an application developer would use GDB to debug an
application. KDB is a frontend of KGDB which is similar to GDB.

By now, in addition to the generic KGDB features, the LoongArch KGDB
implements the following features:
- Hardware breakpoints/watchpoints;
- Software single-step support for KDB.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>   # Framework & CoreFeature
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> # BreakPoint & SingleStep
Signed-off-by: Hui Li <lihui@loongson.cn>           # Some Minor Improvements
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> # Some Build Error Fixes
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Loongson Binary Translation (LBT) is used to accelerate binary translation,
which contains 4 scratch registers (scr0 to scr3), x86/ARM eflags (eflags)
and x87 fpu stack pointer (ftop).

This patch support kernel to save/restore these registers, handle the LBT
exception and maintain sigcontext.
Signed-off-by: Qi Hu <huqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Similar to the syndrome calculation, the recovery algorithms also work
on 64 bytes at a time to align with the L1 cache line size of current
and future LoongArch cores (that we care about). Which means
unrolled-by-4 LSX and unrolled-by-2 LASX code.

The assembly is originally based on the x86 SSSE3/AVX2 ports, but
register allocation has been redone to take advantage of LSX/LASX's 32
vector registers, and instruction sequence has been optimized to suit
(e.g. LoongArch can perform per-byte srl and andi on vectors, but x86
cannot).

Performance numbers measured by instrumenting the raid6test code, on a
3A5000 system clocked at 2.5GHz:

> lasx  2data: 354.987 MiB/s
> lasx  datap: 350.430 MiB/s
> lsx   2data: 340.026 MiB/s
> lsx   datap: 337.318 MiB/s
> intx1 2data: 164.280 MiB/s
> intx1 datap: 187.966 MiB/s

Because recovery algorithms are chosen solely based on priority and
availability, lasx is marked as priority 2 and lsx priority 1. At least
for the current generation of LoongArch micro-architectures, LASX should
always be faster than LSX whenever supported, and have similar power
consumption characteristics (because the only known LASX-capable uarch,
the LA464, always compute the full 256-bit result for vector ops).
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The algorithms work on 64 bytes at a time, which is the L1 cache line
size of all current and future LoongArch cores (that we care about), as
confirmed by Huacai. The code is based on the generic int.uc algorithm,
unrolled 4 times for LSX and 2 times for LASX. Further unrolling does
not meaningfully improve the performance according to experiments.

Performance numbers measured during system boot on a 3A5000 @ 2.5GHz:

> raid6: lasx     gen() 12726 MB/s
> raid6: lsx      gen() 10001 MB/s
> raid6: int64x8  gen()  2876 MB/s
> raid6: int64x4  gen()  3867 MB/s
> raid6: int64x2  gen()  2531 MB/s
> raid6: int64x1  gen()  1945 MB/s

Comparison of xor() speeds (from different boots but meaningful anyway):

> lasx:    11226 MB/s
> lsx:     6395 MB/s
> int64x4: 2147 MB/s

Performance as measured by raid6test:

> raid6: lasx     gen() 25109 MB/s
> raid6: lsx      gen() 13233 MB/s
> raid6: int64x8  gen()  4164 MB/s
> raid6: int64x4  gen()  6005 MB/s
> raid6: int64x2  gen()  5781 MB/s
> raid6: int64x1  gen()  4119 MB/s
> raid6: using algorithm lasx gen() 25109 MB/s
> raid6: .... xor() 14439 MB/s, rmw enabled
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add LSX and LASX implementations of xor operations, operating on 64
bytes (one L1 cache line) at a time, for a balance between memory
utilization and instruction mix. Huacai confirmed that all future
LoongArch implementations by Loongson (that we care) will likely also
feature 64-byte cache lines, and experiments show no throughput
improvement with further unrolling.

Performance numbers measured during system boot on a 3A5000 @ 2.5GHz:

> 8regs           : 12702 MB/sec
> 8regs_prefetch  : 10920 MB/sec
> 32regs          : 12686 MB/sec
> 32regs_prefetch : 10918 MB/sec
> lsx             : 17589 MB/sec
> lasx            : 26116 MB/sec
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Allow usage of LSX/LASX in the kernel by extending kernel_fpu_begin()
and kernel_fpu_end().
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The initial aim is to silence the following objtool warnings:

  arch/loongarch/kernel/fpu.o: warning: objtool: _save_fp_context() falls through to next function fault()
  arch/loongarch/kernel/fpu.o: warning: objtool: _restore_fp_context() falls through to next function fault()
  arch/loongarch/kernel/fpu.o: warning: objtool: _save_lsx_context() falls through to next function fault()
  arch/loongarch/kernel/fpu.o: warning: objtool: _restore_lsx_context() falls through to next function fault()
  arch/loongarch/kernel/fpu.o: warning: objtool: _save_lasx_context() falls through to next function fault()
  arch/loongarch/kernel/fpu.o: warning: objtool: _restore_lasx_context() falls through to next function fault()

Currently, SYM_FUNC_START()/SYM_FUNC_END() defines the symbol 'fault' as
SYM_T_FUNC which is STT_FUNC, the objtool warnings are generated through
the following code:

tools/objtool/include/objtool/check.h:

static inline struct symbol *insn_func(struct instruction *insn)
{
	struct symbol *sym = insn->sym;

	if (sym && sym->type != STT_FUNC)
		sym = NULL;

	return sym;
}

tools/objtool/check.c:

static int validate_branch(struct objtool_file *file, struct symbol *func,
			   struct instruction *insn, struct insn_state state)
{
	...
		if (func && insn_func(insn) && func != insn_func(insn)->pfunc) {
	...
			WARN("%s() falls through to next function %s()",
			     func->name, insn_func(insn)->name);
			return 1;
		}
	...
}

We can see that the fixup can be a local label in the following code:

arch/loongarch/include/asm/asm-extable.h:
	.pushsection	__ex_table, "a";		\
	.balign		4;				\
	.long		((insn) - .);			\
	.long		((fixup) - .);			\
	.short		(type);				\
	.short		(data);				\
	.popsection;

	.macro		_asm_extable, insn, fixup
	__ASM_EXTABLE_RAW(\insn, \fixup, EX_TYPE_FIXUP, 0)
	.endm

Like arch/loongarch/lib/*.S, just define the symbol 'fault' as a local
label in fpu.S.

Before:

$ readelf -s arch/loongarch/kernel/fpu.o | awk -F: /fault/'{print $2}'
 000000000000053c     8 FUNC    GLOBAL DEFAULT    1 fault

After:

$ readelf -s arch/loongarch/kernel/fpu.o | awk -F: /fault/'{print $2}'
 000000000000053c     0 NOTYPE  LOCAL  DEFAULT    1 .L_fpu_fault
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The {copy, clear}_user function should returns number of bytes that
could not be {copied, cleared}. So, try to {copy, clear} byte by byte
when ld.{d,w,h} and st.{d,w,h} trapped into an exception.
Reviewed-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Weihao Li <liweihao@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

On LoongArch system, there is only one page needed for zero page (no
cache synonyms), and there is no COLOR_ZERO_PAGE, so zero_page_mask is
useless and the macro __HAVE_COLOR_ZERO_PAGE is not necessary.

Like other popular architectures, It is simpler to define the zero page
in kernel BSS code segment rather than dynamically allocate.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Function pcpu_populate_pte() and fixmap_pte() are similar, they populate
one page from kernel address space. And there is confusion between pgd
and p4d in the function fixmap_pte(), such as pgd_none() always returns
zero. This patch introduces a unified function populate_kernel_pte() and
then replaces pcpu_populate_pte() and fixmap_pte().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Do some code improvements in function pcpu_populate_pte():
1. Add memory allocation failure handling;
2. Replace pgd_populate() with p4d_populate(), it will be useful if
   there are four-level page tables.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Both shm_align_mask and SHMLBA want to avoid cache alias. But they are
inconsistent: shm_align_mask is (PAGE_SIZE - 1) while SHMLBA is SZ_64K,
but PAGE_SIZE is not always equal to SZ_64K.

This may cause problems when shmat() twice. Fix this problem by removing
shm_align_mask and using SHMLBA (strictly SHMLBA - 1) instead.
Reported-by: Jiantao Shan <shanjiantao@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

When I do LTP test, LTP test case ksm06 caused panic at
	break_ksm_pmd_entry
	  -> pmd_leaf (Huge page table but False)
	  -> pte_present (panic)

The reason is pmd_leaf() is not defined, So like commit 501b8104
("mips: mm: add p?d_leaf() definitions") add p?d_leaf() definition for
LoongArch.

Fixes: 09cfefb7 ("LoongArch: Add memory management")
Cc: stable@vger.kernel.org
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

When building with CONFIG_LTO_CLANG_FULL, there are several errors due
to the way that parse_r is defined with an __asm__ statement in a
header:

  ld.lld: error: ld-temp.o <inline asm>:105:1: macro 'parse_r' is already defined
  .macro  parse_r var r
  ^

This was an issue for arch/mips as well, which was resolved by commit
67512a8c ("MIPS: Avoid macro redefinitions").

However, parse_r is unused in arch/loongarch after commit 83d8b389
("LoongArch: Simplify the invtlb wrappers"), so doing the same change
does not make much sense now. Just remove parse_r (and parse_v, which
is also unused) to resolve the redefinition error. If it needs to be
brought back due to an actual use, it should be brought back with the
same changes as the aforementioned arch/mips commit.

Closes: https://github.com/ClangBuiltLinux/linux/issues/1924Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch architecture changes for 6.5 (raid5/6 optimization) depend on
the md changes to fix build and work, so merge them to create a base.

Pull SCSI fixes from James Bottomley:
 "Three small driver fixes and one larger unused function set removal in
  the raid class (so no external impact)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: snic: Fix double free in snic_tgt_create()
  scsi: core: raid_class: Remove raid_component_add()
  scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW major version > 5
  scsi: ufs: mcq: Fix the search/wrap around logic

Pull x86 fixes from Ingo Molnar:
 "Fix an FPU invalidation bug on exec(), and fix a performance
  regression due to a missing setting of X86_FEATURE_OSXSAVE"

* tag 'x86-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Set X86_FEATURE_OSXSAVE feature after enabling OSXSAVE in CR4
  x86/fpu: Invalidate FPU state correctly on exec()

Pull irq fix from Thomas Gleixner:
 "A last minute fix for a regression introduced in the v6.5 merge
  window.

  The conversion of the software based interrupt resend mechanism to
  hlist missed to add a check whether the descriptor is already enqueued
  and dropped the interrupt descriptor lookup for nested interrupts.

  The missing check whether the descriptor is already queued causes
  hlist corruption and can be observed in the wild. The dropped parent
  descriptor lookup has not yet caused problems, but it would result in
  stale interrupt line in the worst case.

  Add the missing enqueued check and bring the descriptor lookup back to
  cure this"

* tag 'irq-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Fix software resend lockup and nested resend

Merge tag 'loongarch-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Fix a ptrace bug, a hw_breakpoint bug, some build errors/warnings and
  some trivial cleanups"

* tag 'loongarch-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Fix hw_breakpoint_control() for watchpoints
  LoongArch: Ensure FP/SIMD registers in the core dump file is up to date
  LoongArch: Put the body of play_dead() into arch_cpu_idle_dead()
  LoongArch: Add identifier names to arguments of die() declaration
  LoongArch: Return earlier in die() if notify_die() returns NOTIFY_STOP
  LoongArch: Do not kill the task in die() if notify_die() returns NOTIFY_STOP
  LoongArch: Remove <asm/export.h>
  LoongArch: Replace #include <asm/export.h> with #include <linux/export.h>
  LoongArch: Remove unneeded #include <asm/export.h>
  LoongArch: Replace -ffreestanding with finer-grained -fno-builtin's
  LoongArch: Remove redundant "source drivers/firmware/Kconfig"

The switch to using hlist for managing software resend of interrupts
broke resend in at least two ways:

First, unconditionally adding interrupt descriptors to the resend list can
corrupt the list when the descriptor in question has already been
added. This causes the resend tasklet to loop indefinitely with interrupts
disabled as was recently reported with the Lenovo ThinkPad X13s after
threaded NAPI was disabled in the ath11k WiFi driver.

This bug is easily fixed by restoring the old semantics of irq_sw_resend()
so that it can be called also for descriptors that have already been marked
for resend.

Second, the offending commit also broke software resend of nested
interrupts by simply discarding the code that made sure that such
interrupts are retriggered using the parent interrupt.

Add back the corresponding code that adds the parent descriptor to the
resend list.

Fixes: bc06a9e0 ("genirq: Use hlist for managing resend handlers")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/lkml/20230809073432.4193-1-johan+linaro@kernel.org/
Link: https://lore.kernel.org/r/20230826154004.1417-1-johan+linaro@kernel.org

In hw_breakpoint_control(), encode_ctrl_reg() has already encoded the
MWPnCFG3_LoadEn/MWPnCFG3_StoreEn bits in info->ctrl. We don't need to
add (1 << MWPnCFG3_LoadEn | 1 << MWPnCFG3_StoreEn) unconditionally.

Otherwise we can't set read watchpoint and write watchpoint separately.

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

This is a port of commit 379eb01c ("riscv: Ensure the value
of FP registers in the core dump file is up to date").

The values of FP/SIMD registers in the core dump file come from the
thread.fpu. However, kernel saves the FP/SIMD registers only before
scheduling out the process. If no process switch happens during the
exception handling, kernel will not have a chance to save the latest
values of FP/SIMD registers. So it may cause their values in the core
dump file incorrect. To solve this problem, force fpr_get()/simd_get()
to save the FP/SIMD registers into the thread.fpu if the target task
equals the current task.

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Pull clk fixes from Stephen Boyd:
 "One clk driver fix and two clk framework fixes:

   - Fix an OOB access when devm_get_clk_from_child() is used and
     devm_clk_release() casts the void pointer to the wrong type

   - Move clk_rate_exclusive_{get,put}() within the correct ifdefs in
     clk.h so that the stubs are used when CONFIG_COMMON_CLK=n

   - Register the proper clk provider function depending on the value of
     #clock-cells in the TI keystone driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: Fix slab-out-of-bounds error in devm_clk_release()
  clk: Fix undefined reference to `clk_rate_exclusive_{get,put}'
  clk: keystone: syscon-clk: Fix audio refclk

The gcc compiler translates on some architectures the 64-bit
__builtin_clzll() function to a call to the libgcc function __clzdi2(),
which should take a 64-bit parameter on 32- and 64-bit platforms.

But in the current kernel code, the built-in __clzdi2() function is
defined to operate (wrongly) on 32-bit parameters if BITS_PER_LONG ==
32, thus the return values on 32-bit kernels are in the range from
[0..31] instead of the expected [0..63] range.

This patch fixes the in-kernel functions __clzdi2() and __ctzdi2() to
take a 64-bit parameter on 32-bit kernels as well, thus it makes the
functions identical for 32- and 64-bit kernels.

This bug went unnoticed since kernel 3.11 for over 10 years, and here
are some possible reasons for that:

 a) Some architectures have assembly instructions to count the bits and
    which are used instead of calling __clzdi2(), e.g. on x86 the bsr
    instruction and on ppc cntlz is used. On such architectures the
    wrong __clzdi2() implementation isn't used and as such the bug has
    no effect and won't be noticed.

 b) Some architectures link to libgcc.a, and the in-kernel weak
    functions get replaced by the correct 64-bit variants from libgcc.a.

 c) __builtin_clzll() and __clzdi2() doesn't seem to be used in many
    places in the kernel, and most likely only in uncritical functions,
    e.g. when printing hex values via seq_put_hex_ll(). The wrong return
    value will still print the correct number, but just in a wrong
    formatting (e.g. with too many leading zeroes).

 d) 32-bit kernels aren't used that much any longer, so they are less
    tested.

A trivial testcase to verify if the currently running 32-bit kernel is
affected by the bug is to look at the output of /proc/self/maps:

Here the kernel uses a correct implementation of __clzdi2():

  root@debian:~# cat /proc/self/maps
  00010000-00019000 r-xp 00000000 08:05 787324     /usr/bin/cat
  00019000-0001a000 rwxp 00009000 08:05 787324     /usr/bin/cat
  0001a000-0003b000 rwxp 00000000 00:00 0          [heap]
  f7551000-f770d000 r-xp 00000000 08:05 794765     /usr/lib/hppa-linux-gnu/libc.so.6
  ...

and this kernel uses the broken implementation of __clzdi2():

  root@debian:~# cat /proc/self/maps
  0000000010000-0000000019000 r-xp 00000000 000000008:000000005 787324  /usr/bin/cat
  0000000019000-000000001a000 rwxp 000000009000 000000008:000000005 787324  /usr/bin/cat
  000000001a000-000000003b000 rwxp 00000000 00:00 0  [heap]
  00000000f73d1000-00000000f758d000 r-xp 00000000 000000008:000000005 794765  /usr/lib/hppa-linux-gnu/libc.so.6
  ...
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 4df87bb7 ("lib: add weak clz/ctz functions")
Cc: Chanho Min <chanho.min@lge.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mm-hotfixes-stable-2023-08-25-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "18 hotfixes. 13 are cc:stable and the remainder pertain to post-6.4
  issues or aren't considered suitable for a -stable backport"

* tag 'mm-hotfixes-stable-2023-08-25-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  shmem: fix smaps BUG sleeping while atomic
  selftests: cachestat: catch failing fsync test on tmpfs
  selftests: cachestat: test for cachestat availability
  maple_tree: disable mas_wr_append() when other readers are possible
  madvise:madvise_free_pte_range(): don't use mapcount() against large folio for sharing check
  madvise:madvise_free_huge_pmd(): don't use mapcount() against large folio for sharing check
  madvise:madvise_cold_or_pageout_pte_range(): don't use mapcount() against large folio for sharing check
  mm: multi-gen LRU: don't spin during memcg release
  mm: memory-failure: fix unexpected return value in soft_offline_page()
  radix tree: remove unused variable
  mm: add a call to flush_cache_vmap() in vmap_pfn()
  selftests/mm: FOLL_LONGTERM need to be updated to 0x100
  nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers()
  mm/gup: handle cont-PTE hugetlb pages correctly in gup_must_unshare() via GUP-fast
  selftests: cgroup: fix test_kmem_basic less than error
  mm: enable page walking API to lock vmas during the walk
  smaps: use vm_normal_page_pmd() instead of follow_trans_huge_pmd()
  mm/gup: reintroduce FOLL_NUMA as FOLL_HONOR_NUMA_FAULT

Pull RISC-V fixes from Palmer Dabbelt:
 "This is obviously not ideal, particularly for something this late in
  the cycle.

  Unfortunately we found some uABI issues in the vector support while
  reviewing the GDB port, which has triggered a revert -- probably a
  good sign we should have reviewed GDB before merging this, I guess I
  just dropped the ball because I was so worried about the context
  extension and libc suff I forgot. Hence the late revert.

  There's some risk here as we're still exposing the vector context for
  signal handlers, but changing that would have meant reverting all of
  the vector support. The issues we've found so far have been fixed
  already and they weren't absolute showstoppers, so we're essentially
  just playing it safe by holding ptrace support for another release (or
  until we get through a proper userspace code review).

  Summary:

   - The vector ucontext extension has been extended with vlenb

   - The vector registers ELF core dump note type has been changed to
     avoid aliasing with the CSR type used in embedded systems

   - Support for accessing vector registers via ptrace() has been
     reverted

   - Another build fix for the ISA spec changes around Zifencei/Zicsr
     that manifests on some systems built with binutils-2.37 and
     gcc-11.2"

* tag 'riscv-for-linus-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix build errors using binutils2.37 toolchains
  RISC-V: vector: export VLENB csr in __sc_riscv_v_state
  RISC-V: Remove ptrace support for vectors

Pull gpio fixes from Bartosz Golaszewski:

 - fix an irq mapping leak in gpio-sim

 - associate the GPIO device's software node with the irq domain in
   gpio-sim

* tag 'gpio-fixes-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: sim: pass the GPIO device's software node to irq domain
  gpio: sim: dispose of irq mappings before destroying the irq_sim domain

Pull pin control fixes from Linus Walleij:
 "Here are some Renesas and AMD driver fixes, the AMD fix affects
  important laptops in the wild so this one is pretty important. It
  seems a bit tough to get this right.

   - Fix DT parsing and related locking in the Renesas driver.

   - Fix wakeup IRQs in the AMD driver once again. Really tricky this
     one"

* tag 'pinctrl-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: amd: Mask wake bits on probe again
  pinctrl: renesas: rza2: Add lock around pinctrl_generic{{add,remove}_group,{add,remove}_function}
  pinctrl: renesas: rzv2m: Fix NULL pointer dereference in rzv2m_dt_subnode_to_map()
  pinctrl: renesas: rzg2l: Fix NULL pointer dereference in rzg2l_dt_subnode_to_map()

Pull sound fixes from Takashi Iwai:
 "Hopefully the last bits for 6.5. It's slightly higher LOCs than
  wished, but it doesn't look scary.

  The biggest change is MAINTAINERS update for TI; it's good to have the
  update before the final release, so that people can contact to the
  right persons for bug reports (which shouldn't happen of course!)

  The rest are all device-specific fixes and quirks, most for various
  ASoC platforms"

* tag 'sound-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: amd: yc: Fix a non-functional mic on Lenovo 82SJ
  ALSA: ymfpci: Fix the missing snd_card_free() call at probe error
  ASoC: cs35l41: Correct amp_gain_tlv values
  ASoC: amd: yc: Add VivoBook Pro 15 to quirks list for acp6x
  ASoC: tas2781: fixed register access error when switching to other chips
  ASoC: cs35l56: Add an ACPI match table
  ASoC: cs35l56: Read firmware uuid from a device property instead of _SUB
  ASoC: SOF: ipc4-pcm: fix possible null pointer deference
  MAINTAINERS: Add entries for TEXAS INSTRUMENTS ASoC DRIVERS

The initial aim is to silence the following objtool warning:

arch/loongarch/kernel/process.o: warning: objtool: arch_cpu_idle_dead() falls through to next function start_thread()

According to tools/objtool/Documentation/objtool.txt, this is because
the last instruction of arch_cpu_idle_dead() is a call to a noreturn
function play_dead(). In order to silence the warning, one simple way
is to add the noreturn function play_dead() to objtool's hard-coded
global_noreturns array, that is to say, just put "NORETURN(play_dead)"
into tools/objtool/noreturns.h, it works well.

But I noticed that play_dead() is only defined once and only called by
arch_cpu_idle_dead(), so put the body of play_dead() into the caller
arch_cpu_idle_dead(), then remove the noreturn function play_dead() is
an alternative way which can reduce the overhead of the function call
at the same time.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add identifier names to arguments of die() declaration in ptrace.h
to fix the following checkpatch warnings:

  WARNING: function definition argument 'const char *' should also have an identifier name
  WARNING: function definition argument 'struct pt_regs *' should also have an identifier name
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

After the call to oops_exit(), it should not panic or execute
the crash kernel if the oops is to be suppressed.
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

If notify_die() returns NOTIFY_STOP, honor the return value from the
handler chain invocation in die() and return without killing the task
as, through a debugger, the fault may have been fixed. It makes sense
even if ignoring the event will make the system unstable: by allowing
access through a debugger it has been compromised already anyway. It
makes our port consistent with x86, arm64, riscv and csky.

Commit 20c0d2d4 ("[PATCH] i386: pass proper trap numbers to die
chain handlers") may be the earliest of similar changes.

Link: https://lore.kernel.org/r/43DDF02E.76F0.0078.0@novell.com/Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

All *.S files under arch/loongarch/ have been converted to include
<linux/export.h> instead of <asm/export.h>.

Remove <asm/export.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>