If userspace requests a feature which is not available the original set
definition, then bail out with EOPNOTSUPP. If userspace sends
unsupported dynset flags (new feature not supported by this kernel),
then report EOPNOTSUPP to userspace. EINVAL should be only used to
report malformed netlink messages from userspace.

Fixes: 22fe54d5 ("netfilter: nf_tables: add support for dynamic set updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

syzbot reports:
detected buffer overflow in strlen
[..]
Call Trace:
 strlen include/linux/string.h:325 [inline]
 strlcpy include/linux/string.h:348 [inline]
 xt_rateest_tg_checkentry+0x2a5/0x6b0 net/netfilter/xt_RATEEST.c:143

strlcpy assumes src is a c-string. Check info->name before its used.

Reported-by: syzbot+e86f7c428c8c50db65b4@syzkaller.appspotmail.com
Fixes: 5859034d ("[NETFILTER]: x_tables: add RATEEST target")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Commit f9c6cea0 ("ibmvnic: Skip fatal error reset after passive init")
says "If the passive
CRQ initialization occurs before the FATAL reset task is processed,
the FATAL error reset task would try to access a CRQ message queue
that was freed, causing an oops. The problem may be most likely to
occur during DLPAR add vNIC with a non-default MTU, because the DLPAR
process will automatically issue a change MTU request.
Fix this by not processing fatal error reset if CRQ is passively
initialized after client-driven CRQ initialization fails."

The original commit skips a specific reset condition, but that does
not fix the problem it claims to fix, and misses a reset condition.
The effective fix is commit 0e435bef ("ibmvnic: fix NULL pointer
dereference in ibmvic_reset_crq") and commit a0faaa27 ("ibmvnic:
fix NULL pointer dereference in reset_sub_crq_queues"). With above
two fixes, there are no more crashes seen as described even without
the original commit, so I would like to revert the original commit.

Fixes: f9c6cea0 ("ibmvnic: Skip fatal error reset after passive init")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20201223204904.12677-1-ljp@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When mdiobus_register() fails, priv->mdio allocated
by mdiobus_alloc() has not been freed, which leads
to memleak.

Fixes: e7f4dc35 ("mdio: Move allocation of interrupts into core")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201223110615.31389-1-dinghao.liu@zju.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When aggregating ncsi interfaces and dedicated interfaces to bond
interfaces, the ncsi response handler will use the wrong net device to
find ncsi_dev, so that the ncsi interface will not work properly.
Here, we use the original net device to fix it.

Fixes: 138635cc ("net/ncsi: NCSI response packet handler")
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Link: https://lore.kernel.org/r/20201223055523.2069-1-wangzhiqiang.bj@bytedance.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

DCB uses the same handler function for both RTM_GETDCB and RTM_SETDCB
messages. dcb_doit() bounces RTM_SETDCB mesasges if the user does not have
the CAP_NET_ADMIN capability.

However, the operation to be performed is not decided from the DCB message
type, but from the DCB command. Thus DCB_CMD_*_GET commands are used for
reading DCB objects, the corresponding SET and DEL commands are used for
manipulation.

The assumption is that set-like commands will be sent via an RTM_SETDCB
message, and get-like ones via RTM_GETDCB. However, this assumption is not
enforced.

It is therefore possible to manipulate DCB objects without CAP_NET_ADMIN
capability by sending the corresponding command in an RTM_GETDCB message.
That is a bug. Fix it by validating the type of the request message against
the type used for the response.

Fixes: 2f90b865 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver")
Signed-off-by: Petr Machata <me@pmachata.org>
Link: https://lore.kernel.org/r/a2a9b88418f3a58ef211b718f2970128ef9e3793.1608673640.git.me@pmachata.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alex Elder says:

====================
net: ipa: GSI interrupt handling fixes

This series implements fixes for some issues related to handling
interrupts when GSI channel and event ring commands complete.

The first issue is that the completion condition for an event ring
or channel command could occur while the associated interrupt is
disabled.  This would cause the interrupt to fire when it is
subsequently enabled, even if the condition it signals had already
been handled.  The fix is to clear any pending interrupt conditions
before re-enabling the interrupt.

The second and third patches change how the success of an event ring
or channel command is determined.  These commands change the state
of an event ring or channel.  Previously the receipt of a completion
interrupt was required to consider a command successful.  Instead, a
command is successful if it changes the state of the target event
ring or channel in the way expected.  This way the command can
succeed even if the completion interrupt did not arrive while it was
enabled.
====================

Link: https://lore.kernel.org/r/20201222180012.22489-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch implements the same basic fix for event rings as the
previous one does for channels.

The result of issuing an event ring control command should be that
the event ring changes state.  If enabled, a completion interrupt
signals that the event ring state has changed.  This interrupt is
enabled by gsi_evt_ring_command() and disabled again after the
command has completed (or we time out).

There is a window of time during which the command could complete
successfully without interrupting.  This would cause the event ring
to transition to the desired new state.

So whether a event ring command ends via completion interrupt or
timeout, we can consider the command successful if the event ring
has entered the desired state (and a failure if it has not,
regardless of the cause).

Fixes: b4175f87 ("net: ipa: only enable GSI event control IRQs when needed")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The result of issuing a channel control command should be that the
channel changes state.  If enabled, a completion interrupt signals
that the channel state has changed.  This interrupt is enabled by
gsi_channel_command() and disabled again after the command has
completed (or we time out).

There is a window of time--after the completion interrupt is disabled
but before the channel state is read--during which the command could
complete successfully without interrupting.  This would cause the
channel to transition to the desired new state.

So whether a channel command ends via completion interrupt or
timeout, we can consider the command successful if the channel
has entered the desired state (and a failure if it has not,
regardless of the cause).

Fixes: d6c9e3f5 ("net: ipa: only enable generic command completion IRQ when needed");
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We enable the completion interrupt for channel or event ring
commands only when we issue them.  The interrupt is disabled after
the interrupt has fired, or after we have timed out waiting for it.

If we time out, the command could complete after the interrupt has
been disabled, causing a state change in the channel or event ring.
The interrupt associated with that state change would be delivered
the next time the completion interrupt is enabled.

To avoid previous command completions interfering with new commands,
clear all pending completion interrupts before re-enabling them for
a new command.

Fixes: b4175f87 ("net: ipa: only enable GSI event control IRQs when needed")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add TGL-H PCI info and PCI IDs for the new TSN Controller to the list
of supported devices.
Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Link: https://lore.kernel.org/r/20201222160337.30870-1-muhammad.husaini.zulkifli@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When the core clock rate and interconnect bandwidth specifications
were moved into configuration data, a copy/paste bug was introduced,
causing the memory interconnect bandwidth to be set three times
rather than enabling the three different interconnects.

Fix this bug.

Fixes: 91d02f95 ("net: ipa: use config data for clocking")
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Link: https://lore.kernel.org/r/20201222151613.5730-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

virtnet_set_channels can recursively call cpus_read_lock if CONFIG_XPS
and CONFIG_HOTPLUG are enabled.

The path is:
    virtnet_set_channels - calls get_online_cpus(), which is a trivial
wrapper around cpus_read_lock()
    netif_set_real_num_tx_queues
    netif_reset_xps_queues_gt
    netif_reset_xps_queues - calls cpus_read_lock()

This call chain and potential deadlock happens when the number of TX
queues is reduced.

This commit the removes netif_set_real_num_[tr]x_queues calls from
inside the get/put_online_cpus section, as they don't require that it
be held.

Fixes: 47be2479 ("virtio-net: fix the set affinity bug when CPU IDs are not consecutive")
Signed-off-by: Jeff Dike <jdike@akamai.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20201223025421.671-1-jdike@akamai.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-drivers-2020-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.11

First set of fixes for v5.11, more fixes than usual this time. For
ath11k we have several fixes for QCA6390 PCI support and mt76 has
several. Also one build fix for mt76.

mt76
 * fix two NULL pointer dereference
 * fix build error when CONFIG_MAC80211_MESH is disabled

rtlwifi
 * fix use-after-free in firmware handling code

ath11k
 * error handling fixes
 * fix crash found during connect and disconnect test
 * handle HT disable better
 * avoid printing qmi memory failure during firmware bootup
 * disable ASPM during firmware bootup

* tag 'wireless-drivers-2020-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers:
  MAINTAINERS: switch to different email address
  mt76: mt7915: fix MESH ifdef block
  mt76: mt76s: fix NULL pointer dereference in mt76s_process_tx_queue
  mt76: sdio: remove wake logic in mt76s_process_tx_queue
  mt76: usb: remove wake logic in mt76u_status_worker
  ath11k: pci: disable ASPM L0sLs before downloading firmware
  ath11k: qmi: try to allocate a big block of DMA memory first
  rtlwifi: rise completion at the last step of firmware callback
  mt76: mt76u: fix NULL pointer dereference in mt76u_status_worker
  ath11k: Fix ath11k_pci_fix_l1ss()
  ath11k: Fix error code in ath11k_core_suspend()
  ath11k: start vdev if a bss peer is already created
  ath11k: fix crash caused by NULL rx_channel
  ath11k: add missing null check on allocated skb
====================

Link: https://lore.kernel.org/r/20201222163727.D4336C433C6@smtp.codeaurora.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

IPIP tunnels packets are unknown to device,
hence these packets are incorrectly parsed and
caused the packet corruption, so disable offlods
for such packets at run time.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20201221145530.7771-1-manishc@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Join adjacent questions to a single question line. This fixes the
formatting of questions that were not part of the heading.

Also, drop Q: and A: prefixes. We don't need them now that questions and
answers are visually separated.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/f76078ba5547744f2ec178984c32fbc7dcd29a2b.1608454187.git.baruch@tkos.co.ilSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When mvneta_port_power_up() fails, we should execute
cleanup functions after label err_netdev to avoid memleak.

Fixes: 41c2b6b4 ("net: ethernet: mvneta: Add back interface mode validation")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20201220082930.21623-1-dinghao.liu@zju.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 34f0f4e3 ("ibmvnic: Fix login buffer memory leaks") frees
login_rsp_buffer in release_resources() and send_login()
because handle_login_rsp() does not free it.
Commit f3ae59c0 ("ibmvnic: store RX and TX subCRQ handle array in
ibmvnic_adapter struct") frees login_rsp_buffer in handle_login_rsp().
It seems unnecessary to free it in release_resources() and send_login().
There are chances that handle_login_rsp returns earlier without freeing
buffers. Double-checking the buffer is harmless since
release_login_buffer and release_login_rsp_buffer will
do nothing if buffer is already freed.

Fixes: f3ae59c0 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct")
Fixes: 34f0f4e3 ("ibmvnic: Fix login buffer memory leaks")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20201219213919.21045-1-ljp@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When searching for inactive maintainers it's useful to filter
out mailing list addresses. Such "maintainers" will obviously
never feature in a "From:" line of an email or a review tag.

Since "L:" entries only provide the address of a mailing list
without a fancy name extend this pattern to "M:" entries.

Alternatively we could reserve M: entries for humans only
and move the fake "maintainers" to L:. While I'd personally
prefer to reserve M: for humans only, I'm not 100% that's
a great choice either, given most L: entries are in fact
open mailing lists with public archives.

Link: https://lore.kernel.org/r/20201219185538.750076-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The dwmac glue registers on Amlogic Meson8b and newer SoCs has two clock
inputs:
- Meson8b and Meson8m2: MPLL2 and MPLL2 (the same parent is wired to
  both inputs)
- GXBB, GXL, GXM, AXG, G12A, G12B, SM1: FCLK_DIV2 and MPLL2

All known vendor kernels and u-boots are using the first input only. We
let the common clock framework automatically choose the "right" parent.
For some boards this causes a problem though, specificially with G12A and
newer SoCs. The clock input is used for generating the 125MHz RGMII TX
clock. For the two input clocks this means on G12A:
- FCLK_DIV2: 999999985Hz / 8 = 124999998.125Hz
- MPLL2: 499999993Hz / 4 = 124999998.25Hz

In theory MPLL2 is the "better" clock input because it's gets us 0.125Hz
closer to the requested frequency than FCLK_DIV2. In reality however
there is a resource conflict because MPLL2 is needed to generate some of
the audio clocks. dwmac-meson8b probes first and sets up the clock tree
with MPLL2. This works fine until the audio driver comes and "steals"
the MPLL2 clocks and configures it with it's own rate (294909637Hz). The
common clock framework happily changes the MPLL2 rate but does not
reconfigure our RGMII TX clock tree, which then ends up at 73727409Hz,
which is more than 40% off the requested 125MHz.

Don't use the second clock input for now to force the common clock
framework to always select the first parent. This mimics the behavior
from the vendor driver and fixes the clock resource conflict with the
audio driver on G12A boards. Once the common clock framework can handle
this situation this change can be reverted again.

Fixes: 566e8251 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: thomas graichen <thomas.graichen@gmail.com>
Link: https://lore.kernel.org/r/20201219135036.3216017-1-martin.blumenstingl@googlemail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

During GoP port 2 Networking Complex Control mode of operation configurations,
also GoP port 3 mode of operation was wrongly set.
Patch removes these configurations.

Fixes: f84bf386 ("net: mvpp2: initialize the GoP")
Acked-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1608462149-1702-1-git-send-email-stefanc@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

PPPIOCGL2TPSTATS already uses 54. This shouldn't be a problem in
practice, but let's keep the logical decreasing assignment scheme.

Fixes: 4cf476ce ("ppp: add PPPIOCBRIDGECHAN and PPPIOCUNBRIDGECHAN ioctls")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/e3a4c355e3820331d8e1fffef8522739aae58b57.1608380117.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This error path needs to disable the pci device before returning.

Fixes: ede58ef2 ("atm: remove deprecated use of pci api")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X93dmC4NX0vbTpGp@mwandaSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Let the FW know we have enough receive buffer space for the
vlan tag if it isn't stripped.

Fixes: 0f3154e6 ("ionic: Add Tx and Rx handling")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/20201218215001.64696-1-snelson@pensando.ioSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rasmus Villemoes says:

====================
ucc_geth fixes

This is three bug fixes that fell out of a series of cleanups of the
ucc_geth driver.
====================

Link: https://lore.kernel.org/r/20201218105538.30563-1-rasmus.villemoes@prevas.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ugeth is the netdiv_priv() part of the netdevice. Accessing the memory
pointed to by ugeth (such as done by ucc_geth_memclean() and the two
of_node_puts) after free_netdev() is thus use-after-free.

Fixes: 80a9fad8 ("ucc_geth: fix module removal")
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Table 8-53 in the QUICC Engine Reference manual shows definitions of
fields up to a size of 192 bytes, not just 128. But in table 8-111,
one does find the text

  Base Address of the Global Transmitter Parameter RAM Page. [...]
  The user needs to allocate 128 bytes for this page. The address must
  be aligned to the page size.

I've checked both rev. 7 (11/2015) and rev. 9 (05/2018) of the manual;
they both have this inconsistency (and the table numbers are the
same).

Adding a bit of debug printing, on my board the struct
ucc_geth_tx_global_pram is allocated at offset 0x880, while
the (opaque) ucc_geth_thread_data_tx gets allocated immediately
afterwards, at 0x900. So whatever the engine writes into the thread
data overlaps with the tail of the global tx pram (and devmem says
that something does get written during a simple ping).

I haven't observed any failure that could be attributed to this, but
it seems to be the kind of thing that would be extremely hard to
debug. So extend the struct definition so that we do allocate 192
bytes.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

All the buffers and registers are already set up appropriately for an
MTU slightly above 1500, so we just need to expose this to the
networking stack. AFAICT, there's no need to implement .ndo_change_mtu
when the receive buffers are always set up to support the max_mtu.

This fixes several warnings during boot on our mpc8309-board with an
embedded mv88e6250 switch:

mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 0
...
mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 4
ucc_geth e0102000.ethernet eth1: error -22 setting MTU to 1504 to include DSA overhead

The last line explains what the DSA stack tries to do: achieving an MTU
of 1500 on-the-wire requires that the master netdevice connected to
the CPU port supports an MTU of 1500+the tagging overhead.

Fixes: bfcb8132 ("net: dsa: configure the MTU for switch ports")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The driver is already allocating receive buffers of 2KiB and the
Ethernet MAC is configured to accept frames up to UMAC_MAX_MTU_SIZE.

Fixes: bfcb8132 ("net: dsa: configure the MTU for switch ports")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20201218173843.141046-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Switching to private mail account as work email is polluted with a legal
disclaimer. Just making it extra clear by changing the email address in
the MAINTAINERS file as well.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <aspriel@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201220141807.17278-1-aspriel@gmail.com

Fix a build error when CONFIG_MAC80211_MESH is not enabled:

../drivers/net/wireless/mediatek/mt76/mt7915/init.c:47:2: error: expected expression before '}' token
  }, {
  ^

Fixes: af901eb4 ("mt76: mt7915: get rid of dbdc debugfs knob")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Shayne Chen <shayne.chen@mediatek.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: linux-wireless@vger.kernel.org
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201218173202.23159-1-rdunlap@infradead.org

Fix a possible NULL pointer dereference in mt76s_process_tx_queue that
can occur if status thread runs before allocating tx queues

Fixes: 6a618acb ("mt76: sdio: convert {status/net}_work to mt76_worker")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/b49c1b4edacd87b2241a9fd0431dd4864c8963f6.1607418933.git.lorenzo@kernel.org

Similar to mmio/usb code path, remove wake logic in mt76s_process_tx_queue
routine. Starting from commit 90d494c9 ("mt76: improve tx queue
stop/wake"), the wake queue logic on the sdio status path is no longer
necessary since the hw queues are no longer stopped on the mt76 tx path.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/d2d7d9d437f4dec2ef1df0ed070b9cf299f021ad.1607164041.git.lorenzo@kernel.org

Similar to mmio code path, remove wake logic in mt76u_status_worker handler.
Starting from commit 90d494c9 ("mt76: improve tx queue stop/wake")', the
wake queue logic on the usb status path is no longer necessary since the hw
queues are no longer stopped on the mt76 tx path.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/00009bf0cfdc9565e4432cad3ed51888c667c25d.1607164041.git.lorenzo@kernel.org

ath.git fixes for 5.11. Major changes:

ath11k

* add null check for skb allocation

* fix crash found during connect/disconnect stress testing

* fix for HT disabled case

* brown paperbag fixes for my bugs in suspend code

* fix an unnecessary qmi allocation during firmware bootup

* disable ASPM during firmware bootup to avoid issues

Current PPPoE+IPv6 entry is jumping to 'next-hdr'
field and not to 'DIP' field as done for IPv4.

Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit")
Reported-by: Liron Himi <lironh@marvell.com>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1608230266-22111-1-git-send-email-stefanc@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Issue:
Flow control frame used to pause GoP(MAC) was delivered to the CPU
and created a load on the CPU. Since XOFF/XON frames are used only
by MAC, these frames should be dropped inside MAC.

Fix:
According to 802.3-2012 - IEEE Standard for Ethernet pause frame
has unique destination MAC address 01-80-C2-00-00-01.
Add TCAM parser entry to track and drop pause frames by destination MAC.

Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1608229817-21951-1-git-send-email-stefanc@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Force link UP can be enabled by bootloader during tftpboot
and breaks NFS support.
Force link UP disabled during port init procedure.

Fixes: f84bf386 ("net: mvpp2: initialize the GoP")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/1608216735-14501-1-git-send-email-stefanc@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Incorrect loop in error path of nft_set_elem_expr_clone(),
   from Colin Ian King.

2) Missing xt_table_get_private_protected() to access table
   private data in x_tables, from Subash Abhinov Kasiviswanathan.

3) Possible oops in ipset hash type resize, from Vasily Averin.

4) Fix shift-out-of-bounds in ipset hash type, also from Vasily.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: ipset: fix shift-out-of-bounds in htable_bits()
  netfilter: ipset: fixes possible oops in mtype_resize
  netfilter: x_tables: Update remaining dereference to RCU
  netfilter: nftables: fix incorrect increment of loop counter
====================

Link: https://lore.kernel.org/r/20201218120409.3659-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

taprio_graft() can insert a NULL element in the array of child qdiscs. As
a consquence, taprio_reset() might not reset child qdiscs completely, and
taprio_destroy() might leak resources. Fix it by ensuring that loops that
iterate over q->qdiscs[] don't end when they find the first NULL item.

Fixes: 44d4775c ("net/sched: sch_taprio: reset child qdiscs before freeing them")
Fixes: 5a781ccb ("tc: Add support for configuring the taprio scheduler")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/13edef6778fef03adc751582562fba4a13e06d6a.1608240532.git.dcaratti@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>