Move client_type file from /proc/fs/lustre/llite/*
to /sys/fs/lustre/llite/*/
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move filestotal and filesfree files from /proc/fs/lustre/llite/*
to /sys/fs/lustre/llite/*/
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move kbytestotal, kbytesavail and kbytesfree files from
/proc/fs/lustre/llite/* to /sys/fs/lustre/llite/*/
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move blocksize file from /proc/fs/lustre/llite/*/ to
/sys/fs/lustre/llite/*/blocksize
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add necessary infrastructure, add support for mountpoint
registration in /proc/fs/lustre/llite
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

except devices, for now.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add generic helpers to allow displaying oof lustre-specific values
in /sys/fs/lustre
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Opening braces should never be in a new line.
Correct include indentation.
Signed-off-by: Pedro Marzo Perez <marzo.pedro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed comment spelling error.
Signed-off-by: Colin Cronin <colinpatrickcronin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The same area used for ioremap() is used for the MTRR area.
Convert the driver from using the x86 specific MTRR code to
the architecture agnostic arch_phys_wc_add(). arch_phys_wc_add()
will avoid MTRR if write-combining is available, in order to
take advantage of that also ensure the ioremap'd area is requested
as write-combining.

There are a few motivations for this:

a) Take advantage of PAT when available

b) Help bury MTRR code away, MTRR is architecture specific and on
   x86 its replaced by PAT

c) Help with the goal of eventually using _PAGE_CACHE_UC over
   _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit
   de33c442 titled "x86 PAT: fix performance drop for glx,
   use UC minus for ioremap(), ioremap_nocache() and
   pci_mmap_page_range()")

The conversion done is expressed by the following Coccinelle
SmPL patch, it additionally required manual intervention to
address all the #ifdery and removal of redundant things which
arch_phys_wc_add() already addresses such as verbose message
about when MTRR fails and doing nothing when we didn't get
an MTRR.

@ mtrr_found @
expression index, base, size;
@@

-index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1);
+index = arch_phys_wc_add(base, size);

@ mtrr_rm depends on mtrr_found @
expression mtrr_found.index, mtrr_found.base, mtrr_found.size;
@@

-mtrr_del(index, base, size);
+arch_phys_wc_del(index);

@ mtrr_rm_zero_arg depends on mtrr_found @
expression mtrr_found.index;
@@

-mtrr_del(index, 0, 0);
+arch_phys_wc_del(index);

@ mtrr_rm_fb_info depends on mtrr_found @
struct fb_info *info;
expression mtrr_found.index;
@@

-mtrr_del(index, info->fix.smem_start, info->fix.smem_len);
+arch_phys_wc_del(index);

@ ioremap_replace_nocache depends on mtrr_found @
struct fb_info *info;
expression base, size;
@@

-info->screen_base = ioremap_nocache(base, size);
+info->screen_base = ioremap_wc(base, size);

@ ioremap_replace_default depends on mtrr_found @
struct fb_info *info;
expression base, size;
@@

-info->screen_base = ioremap(base, size);
+info->screen_base = ioremap_wc(base, size);

Generated-by: Coccinelle SmPL
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Brian Vandre <bvandre@gmail.com>
Cc: Thomas Gummerer <t.gummerer@gmail.com>
Cc: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Vitor Braga <vitorpybraga@gmail.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Juergen Gross <jgross@suse.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: devel@driverdev.osuosl.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use kernel.h macro definition.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed spelling error in comment.
Signed-off-by: Colin Cronin <colinpatrickcronin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed a few spelling errors in comments.
Signed-off-by: Colin Cronin <colinpatrickcronin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch deletes all references to 'flipbuf'.Memory is allocated and
freed but never used anywhere in the driver.Also deleted an ununsed
Macro defined in the header file.
Signed-off-by: Gujulan Elango Hari Prasath <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes most of the lines over 80 characters long in
dgnc_sysfs.c. I couldn't find a way to break line 202-207 in a sensible
way. If there is a way, let me know.
Signed-off-by: Wim de With <nauxuron@wimdewith.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed coding style issue "warning line over 80 characters"
detected by checkpatch.pl in digi.h
Signed-off-by: Buţiu Alexandru Octavian <predator5047@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pcl812.c (resend of earlier patch)
    Fixed lines exceeding 80 columns, correcting some spelling in process
Signed-off-by: Matthew Needes <mneedes@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pcl812.c / pcl816.c (resend of earlier patch)
   Fixed indentation problems.
Signed-off-by: Matthew Needes <mneedes@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Changed "register 0x%x" to "register=0x%x" to keep the consistency
of this file.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed an error found by checkpatch.pl.
ERROR: space required after that ',' (ctx:VxV)
./drivers/ni_mio_common.c:3764
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Comedi "comedi_isadma.h" header is included by the source for the
"comedi_isadma" helper module and other modules that use it.  It does
not compile cleanly when it is the first header file included.  It uses
the `dma_addr_t` type, so include <linux/types.h> to declare it.  (Also,
that indirectly takes care of the use of `NULL`.)  It uses `struct
comedi_device *` in various function prototypes, so add an incomplete
declaration of `struct comedi_device`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Comedi "comedi_8254.h" header file is included by various Comedi
drivers with timer/counters based on the 8254 chip.  The drivers do not
compile cleanly if this header file is included first.  It uses pointers
to the `struct comedi_device`, `struct comedi_subdevice`, and `struct
comedi_insn` structures in various function prototypes, so declare those
as incomplete types.  It use the `bool` type, so include
<linux/types.h>.  It also uses the `__iomem` tag, but that seems to be
taken care of indirectly by including <linux/types.h>.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Comedi "addi_watchdog.h" header doesn't use anything form
"comedidev.h" apart from `struct comedi_subdevice`, which it only uses
to construct a corresponding pointer type within the parameter list of a
function prototype.  Just declare the structure type incompletely and
don't bother including the header file.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat the copyright comment at the top of the file to use the
preferred block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use braces when the single statement following an `if` (or `else`)
spans more than one line (including any preceding comments).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat the copyright comment at the top of the file to use the
preferred block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat the copyright comment at the top of the file to use the
preferred block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Comedi "amplc_dio200.h" header file included by drivers for Amplicon
DIO200 series cards does not compile cleanly when it is the first header
included by the ".c" file.  It uses `struct comedi_device *` in the
parameter lists of some function prototypes, so just declare `struct
comedi_device` as an incomplete type.  It also uses `bool`, so include
<linux/types.h> to declare it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat the copyright comment at the top of the file to use the
preferred block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Comedi "8255" module is both a standalone Comedi device driver
module for simple devices with one or more 8255 "Programmable Peripheral
Interface" chips at known I/O base addresses (configured at run-time),
and a helper module to configure a 8255-based digital I/O subdevice for
other Comedi drivers.

Split the "8255 subdevice helper" functionality into a new module:
"comedi_8255", leaving the standalone 8255 Comedi driver in the "8255"
module.

The Comedi "detach" routine of the standalone "8255" driver needs to
retrieve the I/O base address passed to the "comedi_8255" module to set
up each subdevice in order to release the I/O port regions it requested
in its "attach" routine.  The "comedi_8255" module stores it in a
"subdevice private" data structure that is no longer known to the "8255"
module, so add a new, exported function `subdev_8255_regbase()` to
retrieve it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Several Comedi driver modules call `subdev_8255_init()` or
`subdev_8255_mm_init()` to set up a digital I/O subdevice based on the
"8255" chip.  One of the parameters to these functions is an optional
pointer to an I/O callback function to perform the actual register
accesses (an internal default callback function is used if NULL).

The kerneldoc for `subdev_8255_init()` and `subdev_8255_mm_init()`
describe the prototype of the optional I/O callback function
incorrectly (my fault), adding a non-existent parameter of type `struct
comedi_subdevice *`.  Fix the kerneldoc.  Also add parameter names to
the callback function pointer type wherever it occurs to make the usage
clearer.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Comedi "8255.h" header doesn't use anything from "comedidev.h" apart
from `struct comedi_device` and `struct comedi_subdevice`, which are
only used to construct corresponding pointer types within the parameter
lists of function prototypes.  Just declare those structure types
incompletely and don't bother including "comedidev.h".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Comedi "8255" driver does not clean up properly on failure.  It can
leave requested I/O port regions unreleased.  Specifically, the Comedi
"attach" handler (`dev_8255_attach()`) requests a specified I/O port
region before calling `subdev_8255_init()` to set up the subdevice.  If
that fails, the "attach" handler returns an error and the Comedi core
will call the "detach" handler (`dev_8255_detach()`) to clean up.  The
"detach" handler is responsible for releasing the I/O port regions
successfully requested by the "attach" handler.  Unfortunately, it is
unable to obtain the base address of the region if the call to
`subdev_8255_init()` failed.

Fix the I/O region leak by releasing the region in the "attach" handler
directly if the call to `subdev_8255_init()` fails.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clean up checkpatch.pl in prism2sta.c
 WARNING : line over 80 characters
Signed-off-by: chaehyun lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

check return value of kmalloc before accessing the memory pointer and
return -ENOMEM if allocation fails.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A recent patch to simplify the lustre large memory allocation
causes new warnings as an unintended side-effect:

lustre/lov/lov_request.c: In function 'lov_finish_set':
lustre/lov/lov_request.c:78:7: warning: unused variable 'len' [-Wunused-variable]
   int len = set->set_oabufs * sizeof(*set->set_pga);
       ^
lustre/obdclass/acl.c: In function 'lustre_ext_acl_xattr_reduce_space':
lustre/obdclass/acl.c:123:6: warning: unused variable 'old_size' [-Wunused-variable]
  int old_size = CFS_ACL_XATTR_SIZE(old_count, ext_acl_xattr);
      ^

The reason is that the 'size' argument to OBD_FREE_LARGE()
is never needed, which was previously hidden by the extra
abstractions.

This avoids the warnings by adding a cast to void, to tell
the compiler that the argument is intentionally unused.
A better fix is probably to remove the entire set of allocation
macros and open-code the normal kernel interface calls.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 99d56ff7 ("staging/lustre: Always try kmalloc first for OBD_ALLOC_LARGE")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LNET_MUTEX_LOCK and LNET_MUTEX_UNLOCK are verbose wrappers to mutex_lock and
mutex_unlock.  Get rid of these.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Unify spacing in variable declarations, and align indentation in headers.
General whitespace cleanups.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Unify variable declarations to use a single space.  Also include several
miscellaneous whitespace cleanups, particularly in socklnd.h.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Unify variable declarations to use a single whitespace.  Also line up
declarations and comments in o2iblnd.h.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>