- 23 Feb, 2017 17 commits
-
-
Majd Dibbiny authored
In the VF driver, module parameter mlx4_log_num_mgm_entry_size was mistakenly overwritten -- and in a manner which overrode the device-managed flow steering option encoded in the parameter. log_num_mgm_entry_size is a global module parameter which affects all ConnectX-3 PFs installed on that host. If a VF changes log_num_mgm_entry_size, this will affect all PFs which are probed subsequent to the change (by disabling DMFS for those PFs). Fixes: 3c439b55 ("mlx4_core: Allow choosing flow steering mode") Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Reviewed-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eugenia Emantayev authored
Spoofcheck can't be enabled if VF MAC is zero. Vice versa, can't zero MAC if spoofcheck is on. Fixes: 8f7ba3ca ('net/mlx4: Add set VF mac address support') Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
Or Gerlitz authored
As ENOTSUPP is specific to NFS, change the return error value to EOPNOTSUPP in various places in the mlx4 driver. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Suggested-by:
Yotam Gigi <yotamg@mellanox.com> Reviewed-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Dmitry V. Levin authored
Consistently use types from linux/types.h to fix the following linux/rds.h userspace compilation errors: /usr/include/linux/rds.h:198:2: error: unknown type name 'u8' u8 rx_traces; /usr/include/linux/rds.h:199:2: error: unknown type name 'u8' u8 rx_trace_pos[RDS_MSG_RX_DGRAM_TRACE_MAX]; /usr/include/linux/rds.h:203:2: error: unknown type name 'u8' u8 rx_traces; /usr/include/linux/rds.h:204:2: error: unknown type name 'u8' u8 rx_trace_pos[RDS_MSG_RX_DGRAM_TRACE_MAX]; /usr/include/linux/rds.h:205:2: error: unknown type name 'u64' u64 rx_trace[RDS_MSG_RX_DGRAM_TRACE_MAX]; Fixes: 3289025a ("RDS: add receive message trace used by application") Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Dmitry V. Levin authored
Include <linux/in6.h> in uapi/linux/seg6.h to fix the following linux/seg6.h userspace compilation error: /usr/include/linux/seg6.h:31:18: error: array type has incomplete element type 'struct in6_addr' struct in6_addr segments[0]; Include <linux/seg6.h> in uapi/linux/seg6_iptunnel.h to fix the following linux/seg6_iptunnel.h userspace compilation error: /usr/include/linux/seg6_iptunnel.h:26:21: error: array type has incomplete element type 'struct ipv6_sr_hdr' struct ipv6_sr_hdr srh[0]; Fixes: a50a05f4 ("ipv6: sr: add missing Kbuild export for header files") Signed-off-by:
-
Jiri Pirko authored
As reported by Geert, remove the string so the user does not see this config option. The option is explicitly selected only as a dependency of in-kernel users. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Fixes: 44091d29 ("lib: Introduce priority array area manager") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Tested-by:
-
Zhu Yanjun authored
In a void function, it is not necessary to append a return statement in it. Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by:
-
Colin Ian King authored
trivial fix to spelling mistake in verbose log message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Dmitry V. Levin authored
Include <linux/if.h> to fix the following linux/llc.h userspace compilation error: /usr/include/linux/llc.h:26:27: error: 'IFHWADDRLEN' undeclared here (not in a function) unsigned char sllc_mac[IFHWADDRLEN]; Signed-off-by:
-
Dmitry V. Levin authored
Include <linux/if.h> and <linux/in6.h> to fix the following linux/ip6_tunnel.h userspace compilation errors: /usr/include/linux/ip6_tunnel.h:23:12: error: 'IFNAMSIZ' undeclared here (not in a function) char name[IFNAMSIZ]; /* name of tunnel device */ /usr/include/linux/ip6_tunnel.h:30:18: error: field 'laddr' has incomplete type struct in6_addr laddr; /* local tunnel end-point address */ Signed-off-by:
-
David S. Miller authored
Saeed Mahameed says: ==================== Mellanox mlx5e fixes for 4.11-rc1 This series includes some important bug fixes for mlx5e driver. Three misc fixes: From Mohamad, compilation fix on s390 system From Me, A fix for driver unload when switchdev mode is on. From Tariq, HW LRO frag size optimization for when build_skb is not used (striding RQ mode). Three CQE compression related fixes: Two fixes from Tariq and I, to correctly setup CQE compression parameters on driver load and on arbitrary user modifications. Last patch, fixes a very critical issue that was originally reported by Tom, where the driver reported csum errors or even page ref issues for when cqe compression is enabled and rapidly active. For your convenience this series was generated on top of net-next branch: 005c3490 ('Revert "ath10k: Search SMBIOS for OEM board file extension"') for -stable: net/mlx5e: Register/unregister vport representors on interface (for kernel >= 4.9) net/mlx5e: Do not reduce LRO WQE size when not using build_skb (for kernel >= 4.9) net/mlx5e: Fix broken CQE compression initialization (for kernel >= 4.9) net/mlx5e: Update MPWQE stride size when modifying CQE compress state (for kernel >= 4.7) net/mlx5e: Fix wrong CQE decompression (for kernel >= 4.7) ==================== Signed-off-by:
-
Tariq Toukan authored
In cqe compression with striding RQ, the decompression of the CQE field wqe_counter was done with a wrong wraparound value. This caused handling cqes with a wrong pointer to wqe (rx descriptor) and creating SKBs with wrong data, pointing to wrong (and already consumed) strides/pages. The meaning of the CQE field wqe_counter in striding RQ holds the stride index instead of the WQE index. Hence, when decompressing a CQE, wqe_counter should have wrapped-around the number of strides in a single multi-packet WQE. We dropped this wrap-around mask at all in CQE decompression of striding RQ. It is not needed as in such cases the CQE compression session would break because of different value of wqe_id field, starting a new compression session. Tested: ethtool -K ethxx lro off/on ethtool --set-priv-flags ethxx rx_cqe_compress on super_netperf 16 {ipv4,ipv6} -t TCP_STREAM -m 50 -D verified no csum errors and no page refcount issues. Fixes: 7219ab34 ("net/mlx5e: CQE compression") Signed-off-by:Tom Herbert <tom@herbertland.com> Cc: kernel-team@fb.com Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
When the admin enables/disables cqe compression, updating mpwqe stride size is required: CQE compress ON ==> stride size = 256B CQE compress OFF ==> stride size = 64B This is already done on driver load via mlx5e_set_rq_type_params, all we need is just to call it on arbitrary admin changes of cqe compression state via priv flags or when changing timestamping state (as it is mutually exclusive with cqe compression). This bug introduces no functional damage, it only makes cqe compression occur less often, since in ConnectX4-LX CQE compression is performed only on packets smaller than stride size. Tested: ethtool --set-priv-flags ethxx rx_cqe_compress on pktgen with 64 < pkt size < 256 and netperf TCP_STREAM (IPv4/IPv6) verify `ethtool -S ethxx | grep compress` are advancing more often (rapidly) Fixes: 7219ab34 ("net/mlx5e: CQE compression") Signed-off-by: -
Tariq Toukan authored
Some of RQ type parameters are derived from CQE compression state flag, CQE compression flag was initialized only after RQ type parameters setup. This leads to load RQ with stride size smaller than what we want for when CQE compression is on. This bug introduces no functional damage, it only makes CQE compression occur less often, since in ConnectX4-LX CQE compression is performed only on packets smaller than stride size. Fix this by marking default status of CQE compression in PFLAG prior to calling mlx5e_set_rq_priv_params(), as it inits some fields based on it. Tested: load driver on systems where rx CQE compress will be on (MH) pktgen with 64 < pkt size < 256 and netperf TCP_STREAM (IPv4/IPv6) verify `ethtool -S ethxx | grep compress` are advancing more often (rapidly) Fixes: 2fc4bfb7 ("net/mlx5e: Dynamic RQ type infrastructure") Signed-off-by:
-
Tariq Toukan authored
When rq_type is Striding RQ, no room of SKB_RESERVE is needed as SKB allocation is not done via build_skb. Fixes: e4b85508 ("net/mlx5e: Slightly reduce hardware LRO size") Signed-off-by:
-
Saeed Mahameed authored
Currently vport representors are added only on driver load and removed on driver unload. Apparently we forgot to handle them when we added the seamless reset flow feature. This caused to leave the representors netdevs alive and active with open HW resources on pci shutdown and on error reset flows. To overcome this we move their handling to interface attach/detach, so they would be cleaned up on shutdown and recreated on reset flows. Fixes: 26e59d80 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks") Signed-off-by:
Hadar Hen Zion <hadarh@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
-
Mohamad Haj Yahia authored
Add necessary headers include for s390 arch compilation. Fixes: e586b3b0 ("net/mlx5: Ethernet Datapath files") Fixes: d605d668 ("net/mlx5e: Add support for ethtool self..") Signed-off-by:
Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by:
-
- 22 Feb, 2017 23 commits
-
-
Alexey Kodanev authored
We can get SYN with zero tsecr, don't apply offset in this case. Fixes: ee684b6f ("tcp: send packets with a socket timestamp") Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Alexey Kodanev authored
Found that when randomized tcp offsets are enabled (by default) TCP client can still start new connections without them. Later, if server does active close and re-uses sockets in TIME-WAIT state, new SYN from client can be rejected on PAWS check inside tcp_timewait_state_process(), because either tw_ts_recent or rcv_tsval doesn't really have an offset set. Here is how to reproduce it with LTP netstress tool: netstress -R 1 & netstress -H 127.0.0.1 -lr 1000000 -a1 [...] < S seq 1956977072 win 43690 TS val 295618 ecr 459956970 > . ack 1956911535 win 342 TS val 459967184 ecr 1547117608 < R seq 1956911535 win 0 length 0 +1. < S seq 1956977072 win 43690 TS val 296640 ecr 459956970 > S. seq 657450664 ack 1956977073 win 43690 TS val 459968205 ecr 296640 Fixes: 95a22cae ("tcp: randomize tcp timestamp offsets for each connection") Signed-off-by: -
Andrey Ryabinin authored
DCCP doesn't purge timewait sockets on network namespace shutdown. So, after net namespace destroyed we could still have an active timer which will trigger use after free in tw_timer_handler(): BUG: KASAN: use-after-free in tw_timer_handler+0x4a/0xa0 at addr ffff88010e0d1e10 Read of size 8 by task swapper/1/0 Call Trace: __asan_load8+0x54/0x90 tw_timer_handler+0x4a/0xa0 call_timer_fn+0x127/0x480 expire_timers+0x1db/0x2e0 run_timer_softirq+0x12f/0x2a0 __do_softirq+0x105/0x5b4 irq_exit+0xdd/0xf0 smp_apic_timer_interrupt+0x57/0x70 apic_timer_interrupt+0x90/0xa0 Object at ffff88010e0d1bc0, in cache net_namespace size: 6848 Allocated: save_stack_trace+0x1b/0x20 kasan_kmalloc+0xee/0x180 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0x134/0x310 copy_net_ns+0x8d/0x280 create_new_namespaces+0x23f/0x340 unshare_nsproxy_namespaces+0x75/0xf0 SyS_unshare+0x299/0x4f0 entry_SYSCALL_64_fastpath+0x18/0xad Freed: save_stack_trace+0x1b/0x20 kasan_slab_free+0xae/0x180 kmem_cache_free+0xb4/0x350 net_drop_ns+0x3f/0x50 cleanup_net+0x3df/0x450 process_one_work+0x419/0xbb0 worker_thread+0x92/0x850 kthread+0x192/0x1e0 ret_from_fork+0x2e/0x40 Add .exit_batch hook to dccp_v4_ops()/dccp_v6_ops() which will purge timewait sockets on net namespace destruction and prevent above issue. Fixes: f2bf415c ("mib: add net to NET_ADD_STATS_BH") Reported-by:Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Dmitry V. Levin authored
Include <sys/socket.h> (guarded by ifndef __KERNEL__) to fix the following linux/if.h userspace compilation errors: /usr/include/linux/if.h:234:19: error: field 'ifru_addr' has incomplete type struct sockaddr ifru_addr; /usr/include/linux/if.h:235:19: error: field 'ifru_dstaddr' has incomplete type struct sockaddr ifru_dstaddr; /usr/include/linux/if.h:236:19: error: field 'ifru_broadaddr' has incomplete type struct sockaddr ifru_broadaddr; /usr/include/linux/if.h:237:19: error: field 'ifru_netmask' has incomplete type struct sockaddr ifru_netmask; /usr/include/linux/if.h:238:20: error: field 'ifru_hwaddr' has incomplete type struct sockaddr ifru_hwaddr; This also fixes userspace compilation of the following uapi headers: linux/atmbr2684.h linux/gsmmux.h linux/if_arp.h linux/if_bonding.h linux/if_frad.h linux/if_pppox.h linux/if_tunnel.h linux/netdevice.h linux/route.h linux/wireless.h As no uapi header provides a definition of struct sockaddr, inclusion of <sys/socket.h> seems to be the most conservative and the only safe fix available. All current users of <linux/if.h> are very likely to be including <sys/socket.h> already because the latter is the sole provider of struct sockaddr definition in libc, so adding a uapi header with a definition of struct sockaddr would create a potential conflict with <sys/socket.h>. Replacing struct sockaddr in the definition of struct ifreq with a different type would create a potential incompatibility with current users of struct ifreq who might rely on ifru_addr et al members being of type struct sockaddr. Signed-off-by:
-
Ridge Kennedy authored
While destroying a network namespace that contains a L2TP tunnel a "BUG: scheduling while atomic" can be observed. Enabling lockdep shows that this is happening because l2tp_exit_net() is calling l2tp_tunnel_closeall() (via l2tp_tunnel_delete()) from within an RCU critical section. l2tp_exit_net() takes rcu_read_lock_bh() << list_for_each_entry_rcu() >> l2tp_tunnel_delete() l2tp_tunnel_closeall() __l2tp_session_unhash() synchronize_rcu() << Illegal inside RCU critical section >> BUG: sleeping function called from invalid context in_atomic(): 1, irqs_disabled(): 0, pid: 86, name: kworker/u16:2 INFO: lockdep is turned off. CPU: 2 PID: 86 Comm: kworker/u16:2 Tainted: G W O 4.4.6-at1 #2 Hardware name: Xen HVM domU, BIOS 4.6.1-xs125300 05/09/2016 Workqueue: netns cleanup_net 0000000000000000 ffff880202417b90 ffffffff812b0013 ffff880202410ac0 ffffffff81870de8 ffff880202417bb8 ffffffff8107aee8 ffffffff81870de8 0000000000000c51 0000000000000000 ffff880202417be0 ffffffff8107b024 Call Trace: [<ffffffff812b0013>] dump_stack+0x85/0xc2 [<ffffffff8107aee8>] ___might_sleep+0x148/0x240 [<ffffffff8107b024>] __might_sleep+0x44/0x80 [<ffffffff810b21bd>] synchronize_sched+0x2d/0xe0 [<ffffffff8109be6d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8105c7bb>] ? __local_bh_enable_ip+0x6b/0xc0 [<ffffffff816a1b00>] ? _raw_spin_unlock_bh+0x30/0x40 [<ffffffff81667482>] __l2tp_session_unhash+0x172/0x220 [<ffffffff81667397>] ? __l2tp_session_unhash+0x87/0x220 [<ffffffff8166888b>] l2tp_tunnel_closeall+0x9b/0x140 [<ffffffff81668c74>] l2tp_tunnel_delete+0x14/0x60 [<ffffffff81668dd0>] l2tp_exit_net+0x110/0x270 [<ffffffff81668d5c>] ? l2tp_exit_net+0x9c/0x270 [<ffffffff815001c3>] ops_exit_list.isra.6+0x33/0x60 [<ffffffff81501166>] cleanup_net+0x1b6/0x280 ... This bug can easily be reproduced with a few steps: $ sudo unshare -n bash # Create a shell in a new namespace # ip link set lo up # ip addr add 127.0.0.1 dev lo # ip l2tp add tunnel remote 127.0.0.1 local 127.0.0.1 tunnel_id 1 \ peer_tunnel_id 1 udp_sport 50000 udp_dport 50000 # ip l2tp add session name foo tunnel_id 1 session_id 1 \ peer_session_id 1 # ip link set foo up # exit # Exit the shell, in turn exiting the namespace $ dmesg ... [942121.089216] BUG: scheduling while atomic: kworker/u16:3/13872/0x00000200 ... To fix this, move the call to l2tp_tunnel_closeall() out of the RCU critical section, and instead call it from l2tp_tunnel_del_work(), which is running from the l2tp_wq workqueue. Fixes: 2b551c6e ("l2tp: close sessions before initiating tunnel delete") Signed-off-by:Ridge Kennedy <ridge.kennedy@alliedtelesis.co.nz> Acked-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Bhumika Goyal authored
Declare bin_attribute structures as const as they are only passed as an arguments to the functions device_remove_bin_file and device_create_bin_file. These function arguments are of type const, so bin_attribute structures having this property can be made const too. Done using Coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct bin_attribute i@p = {...}; @ok1@ identifier r1.i; position p,p1; @@ ( device_remove_bin_file(...,&i@p) | device_create_bin_file(..., &i@p1) ) @bad@ position p!={r1.p,ok1.p,ok1.p1}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct bin_attribute i; Signed-off-by:Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
Declare bin_attribute structures as const as they are only passed as an arguments to the functions device_remove_bin_file and device_create_bin_file. These function arguments are of type const, so bin_attribute structures having this property can be made const too. Done using Coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct bin_attribute i@p = {...}; @ok1@ identifier r1.i; position p,p1; @@ ( device_remove_bin_file(...,&i@p) | device_create_bin_file(..., &i@p1) ) @bad@ position p!={r1.p,ok1.p,ok1.p1}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct bin_attribute i; Signed-off-by: -
Christian Lamparter authored
This patch adds glue-code that allows the EMAC driver to interface with the existing dt-supported PHYs in drivers/net/phy. Because currently, the emac driver maintains a small library of supported phys for in a private phy.c file located in the drivers directory. The support is limited to mostly single ethernet transceiver like the: CIS8201, BCM5248, ET1011C, Marvell 88E1111 and 88E1112, AR8035. However, routers like the Netgear WNDR4700 and Cisco Meraki MX60(W) have a 5-port switch (AR8327N) attached to the EMAC. The switch chip is supported by the qca8k mdio driver, which uses the generic phy library. Another reason is that PHYLIB also supports the BCM54610, which was used for the Western Digital My Book Live. This will now also make EMAC select PHYLIB. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 updates from Will Deacon: - Errata workarounds for Qualcomm's Falkor CPU - Qualcomm L2 Cache PMU driver - Qualcomm SMCCC firmware quirk - Support for DEBUG_VIRTUAL - CPU feature detection for userspace via MRS emulation - Preliminary work for the Statistical Profiling Extension - Misc cleanups and non-critical fixes * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (74 commits) arm64/kprobes: consistently handle MRS/MSR with XZR arm64: cpufeature: correctly handle MRS to XZR arm64: traps: correctly handle MRS/MSR with XZR arm64: ptrace: add XZR-safe regs accessors arm64: include asm/assembler.h in entry-ftrace.S arm64: fix warning about swapper_pg_dir overflow arm64: Work around Falkor erratum 1003 arm64: head.S: Enable EL1 (host) access to SPE when entered at EL2 arm64: arch_timer: document Hisilicon erratum 161010101 arm64: use is_vmalloc_addr arm64: use linux/sizes.h for constants arm64: uaccess: consistently check object sizes perf: add qcom l2 cache perf events driver arm64: remove wrong CONFIG_PROC_SYSCTL ifdef ARM: smccc: Update HVC comment to describe new quirk parameter arm64: do not trace atomic operations ACPI/IORT: Fix the error return code in iort_add_smmu_platform_device() ACPI/IORT: Fix iort_node_get_id() mapping entries indexing arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA perf: xgene: Include module.h ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC updates from Vineet Gupta: - Intc imporvements [Yuriy] - VDK platform updates [Alexey] * tag 'arc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-*] ARC_HAS_COH_CACHES no longer relevant ARCv2: intc: Delete useless comments in Device Trees ARCv2: IDU-intc: Delete deprecated parameters in Device Trees ARCv2: IDU-intc: mask all common interrupts by default ARCv2: IDU-intc: Use build registers for getting numbers of interrupts ARCv2: intc: Set default priority for all core interrupts ARCv2: intc: Use runtime value of irq count for setting up intc ARCv2: intc: Rework the build time irq count information ARC: [intc-*]: confine NR_CPU_IRQS to intc code ARCv2: intc: Use ARC_REG_STATUS32 for addressing STATUS32 reg arc: vdk: Add support of UIO arc: vdk: Add support of MMC controller arc: vdk: Disable halt on reset
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for direct mapped LPC on POWER9, giving Linux direct access to devices that may be on there such as a UART. - Memory hotplug support for the Power9 Radix MMU. - Add new AUX vectors describing the processor's cache geometry, to be used by glibc. - The ability for a guest to ask the hypervisor to resize the guest's hash table, and in addition support for doing so automatically when memory is hotplugged into/out-of the guest. This allows the hash table to be sized based on the current memory usage of the guest, rather than the maximum possible memory usage. - Implementation of optprobes (kprobe optimisation) for powerpc. In addition there's the topic branch shared with the KVM tree, which includes support for guests to use the Radix MMU on Power9. Thanks to: Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T, Anton Blanchard, Benjamin Herrenschmidt, Chris Packham, Daniel Axtens, Daniel Borkmann, David Gibson, Finn Thain, Gautham R. Shenoy, Gavin Shan, Greg Kurz, Joel Stanley, John Allen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Ravi Bangoria, Reza Arbab, Shailendra Singh, Vaibhav Jain, Wei Yongjun" * tag 'powerpc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (129 commits) powerpc/mm/radix: Skip ptesync in pte update helpers powerpc/mm/radix: Use ptep_get_and_clear_full when clearing pte for full mm powerpc/mm/radix: Update pte update sequence for pte clear case powerpc/mm: Update PROTFAULT handling in the page fault path powerpc/xmon: Fix data-breakpoint powerpc/mm: Fix build break with BOOK3S_64=n and MEMORY_HOTPLUG=y powerpc/mm: Fix build break when CMA=n && SPAPR_TCE_IOMMU=y powerpc/mm: Fix build break with RADIX=y & HUGETLBFS=n powerpc/pseries: Fix typo in parameter description powerpc/kprobes: Remove kprobe_exceptions_notify() kprobes: Introduce weak variant of kprobe_exceptions_notify() powerpc/ftrace: Fix confusing help text for DISABLE_MPROFILE_KERNEL powerpc/powernv: Fix opal_exit tracepoint opcode powerpc: Add a prototype for mcount() so it can be versioned powerpc: Drop GPL from of_node_to_nid() export to match other arches powerpc/kprobes: Optimize kprobe in kretprobe_trampoline() powerpc/kprobes: Implement Optprobes powerpc/kprobes: Fixes for kprobe_lookup_name() on BE powerpc: Add helper to check if offset is within relative branch range powerpc/bpf: Introduce __PPC_SH64() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Martin Schwidefsky: - New entropy generation for the pseudo random number generator. - Early boot printk output via sclp to help debug crashes on boot. This needs to be enabled with a kernel parameter. - Add proper no-execute support with a bit in the page table entry. - Bug fixes and cleanups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (65 commits) s390/syscall: fix single stepped system calls s390/zcrypt: make ap_bus explicitly non-modular s390/zcrypt: Removed unneeded debug feature directory creation. s390: add missing "do {} while (0)" loop constructs to multiline macros s390/mm: add cond_resched call to kernel page table dumper s390: get rid of MACHINE_HAS_PFMF and MACHINE_HAS_HPAGE s390/mm: make memory_block_size_bytes available for !MEMORY_HOTPLUG s390: replace ACCESS_ONCE with READ_ONCE s390: Audit and remove any remaining unnecessary uses of module.h s390: mm: Audit and remove any unnecessary uses of module.h s390: kernel: Audit and remove any unnecessary uses of module.h s390/kdump: Use "LINUX" ELF note name instead of "CORE" s390: add no-execute support s390: report new vector facilities s390: use correct input data address for setup_randomness s390/sclp: get rid of common response code handling s390/sclp: don't add new lines to each printed string s390/sclp: make early sclp code readable s390/sclp: disable early sclp code as soon as the base sclp driver is active s390/sclp: move early printk code to drivers ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds authored
Pull networking updates from David Miller: "Highlights: 1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini Varadhan. 2) Simplify classifier state on sk_buff in order to shrink it a bit. From Willem de Bruijn. 3) Introduce SIPHASH and it's usage for secure sequence numbers and syncookies. From Jason A. Donenfeld. 4) Reduce CPU usage for ICMP replies we are going to limit or suppress, from Jesper Dangaard Brouer. 5) Introduce Shared Memory Communications socket layer, from Ursula Braun. 6) Add RACK loss detection and allow it to actually trigger fast recovery instead of just assisting after other algorithms have triggered it. From Yuchung Cheng. 7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot. 8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert. 9) Export MPLS packet stats via netlink, from Robert Shearman. 10) Significantly improve inet port bind conflict handling, especially when an application is restarted and changes it's setting of reuseport. From Josef Bacik. 11) Implement TX batching in vhost_net, from Jason Wang. 12) Extend the dummy device so that VF (virtual function) features, such as configuration, can be more easily tested. From Phil Sutter. 13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric Dumazet. 14) Add new bpf MAP, implementing a longest prefix match trie. From Daniel Mack. 15) Packet sample offloading support in mlxsw driver, from Yotam Gigi. 16) Add new aquantia driver, from David VomLehn. 17) Add bpf tracepoints, from Daniel Borkmann. 18) Add support for port mirroring to b53 and bcm_sf2 drivers, from Florian Fainelli. 19) Remove custom busy polling in many drivers, it is done in the core networking since 4.5 times. From Eric Dumazet. 20) Support XDP adjust_head in virtio_net, from John Fastabend. 21) Fix several major holes in neighbour entry confirmation, from Julian Anastasov. 22) Add XDP support to bnxt_en driver, from Michael Chan. 23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan. 24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi. 25) Support GRO in IPSEC protocols, from Steffen Klassert" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits) Revert "ath10k: Search SMBIOS for OEM board file extension" net: socket: fix recvmmsg not returning error from sock_error bnxt_en: use eth_hw_addr_random() bpf: fix unlocking of jited image when module ronx not set arch: add ARCH_HAS_SET_MEMORY config net: napi_watchdog() can use napi_schedule_irqoff() tcp: Revert "tcp: tcp_probe: use spin_lock_bh()" net/hsr: use eth_hw_addr_random() net: mvpp2: enable building on 64-bit platforms net: mvpp2: switch to build_skb() in the RX path net: mvpp2: simplify MVPP2_PRS_RI_* definitions net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT net: mvpp2: remove unused register definitions net: mvpp2: simplify mvpp2_bm_bufs_add() net: mvpp2: drop useless fields in mvpp2_bm_pool and related code net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue' net: mvpp2: release reference to txq_cpu[] entry after unmapping net: mvpp2: handle too large value in mvpp2_rx_time_coal_set() net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set() net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set ... -
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull gcc-plugins updates from Kees Cook: "This includes infrastructure updates and the structleak plugin, which performs forced initialization of certain structures to avoid possible information exposures to userspace. Summary: - infrastructure updates (gcc-common.h) - introduce structleak plugin for forced initialization of some structures" * tag 'gcc-plugins-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: Add structleak for more stack initialization gcc-plugins: consolidate on PASS_INFO macro gcc-plugins: add PASS_INFO and build_const_char_string() -
Kees Cook authored
-
Kees Cook authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull rodata updates from Kees Cook: "This renames the (now inaccurate) DEBUG_RODATA and related SET_MODULE_RONX configs to the more sensible STRICT_KERNEL_RWX and STRICT_MODULE_RWX" * tag 'rodata-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull usercopy test updates from Kees Cook: "This improves the usercopy tests: - check zeroing on failed copy_from_user()/get_user() (caught bug on ARM) - adjust tests for SMAP/PAN (can't zero userspace memory on failure)" * tag 'usercopy-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: usercopy: Add tests for all get_user() sizes usercopy: Adjust tests to deal with SMAP/PAN usercopy: add testcases to check zeroing on failure -
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore updates from Kees Cook: "Minor changes to pstore tree: - update MAINTAINERS with current git repo, add more files. - move prz allocation checks into the walker - initialize flags correctly (by accident spinlock was technically ok)" * tag 'pstore-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: MAINTAINERS: Adjust pstore git repo URI, add files pstore: Check for prz allocation in walker pstore: Correctly initialize spinlock and flags -
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fix from Jiri Kosina: "Regression fix for HID_RMI-driven synaptics touchpads in !CONFIG_HID_RMI cases" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: rmi: fallback to generic/multitouch if hid-rmi is not built
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata updates from Tejun Heo: - Bartlomiej added pata_falcon - Christoph is trying to remove use of static 4k buf. It's still WIP - config cleanup around HAS_DMA - other fixes and driver-specific changes * 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (29 commits) ata: pata_of_platform: using of_property_read_u32() helper pata_atiixp: Don't use unconnected secondary port on SB600/SB700 libata-sff: Don't scan disabled ports when checking for legacy mode. pata_octeon_cf: remove unused local variables from octeon_cf_set_piomode() ahci: qoriq: added ls2088a platforms support ahci: qoriq: report error when ecc register address is missing in dts ahci: qoriq: added a condition to enable dma coherence Revert "libata: switch to dynamic allocation instead of ata_scsi_rbuf" ahci: imx: fix building without hwmon or thermal ata: add Atari Falcon PATA controller driver ata: pass queued command to ->sff_data_xfer method ata: allow subsystem to be used on m68k arch libata: switch to dynamic allocation instead of ata_scsi_rbuf libata: don't call ata_scsi_rbuf_fill for command without a response buffer libata: call ->scsi_done from ata_scsi_simulate libata: remove the done callback from ata_scsi_args libata: move struct ata_scsi_args to libata-scsi.c libata: avoid global response buffer in atapi_qc_complete libata-eh: Use switch() instead of sparse array for protocol strings ata: sata_mv: Convert to devm_ioremap_resource() ...
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine updates from Vinod Koul: "This time we fairly boring and bit small update. - Support for Intel iDMA 32-bit hardware - deprecate broken support for channel switching in async_tx - bunch of updates on stm32-dma - Cyclic support for zx dma and making in generic zx dma driver - Small updates to bunch of other drivers" * tag 'dmaengine-4.11-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits) async_tx: deprecate broken support for channel switching dmaengine: rcar-dmac: Widen DMA mask to 40 bits dmaengine: sun6i: allow build on ARM64 platforms (sun50i) dmaengine: Provide a wrapper for memcpy operations dmaengine: zx: fix build warning dmaengine: dw: we do support Merrifield SoC in PCI mode dmaengine: dw: add support of iDMA 32-bit hardware dmaengine: dw: introduce register mappings for iDMA 32-bit dmaengine: dw: introduce block2bytes() and bytes2block() dmaengine: dw: extract dwc_chan_pause() for future use dmaengine: dw: replace convert_burst() with one liner dmaengine: dw: register IRQ and DMA pool with instance ID dmaengine: dw: Fix data corruption in large device to memory transfers dmaengine: ste_dma40: indicate granularity on channels dmaengine: ste_dma40: indicate directions on channels dmaengine: stm32-dma: Add error messages if xlate fails dmaengine: dw: pci: remove LPE Audio DMA ID dmaengine: stm32-dma: Add max_burst support dmaengine: stm32-dma: Add synchronization support dmaengine: stm32-dma: Fix residue computation issue in cyclic mode ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media updates from Mauro Carvalho Chehab: - new drivers: - i.MX6 Video Data Order Adapter's (VDOA) - Toshiba et8ek8 5MP sensor - STM DELTA multi-format video decoder V4L2 driver - SPI connected IR LED - Mediatek IR remote receiver - ZyDAS ZD1301 DVB USB interface driver - new RC keymaps - some very old LIRC drivers got removed from staging - RC core gained support encoding IR scan codes - DVB si2168 gained support for DVBv5 statistics - lirc_sir driver ported to rc-core and promoted from staging - other bug fixes, board additions and driver improvements * tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (230 commits) [media] mtk-vcodec: fix build warnings without DEBUG [media] zd1301: fix building interface driver without demodulator [media] usbtv: add sharpness control [media] cxusb: Use a dma capable buffer also for reading [media] ttpci: address stringop overflow warning [media] dvb-usb-v2: avoid use-after-free [media] add Hama Hybrid DVB-T Stick support [media] et8ek8: Fix compiler / Coccinelle warnings [media] media: fix semicolon.cocci warnings [media] media: exynos4-is: add flags to dummy Exynos IS i2c adapter [media] v4l: of: check for unique lanes in data-lanes and clock-lanes [media] coda/imx-vdoa: constify structs [media] st-delta: debug: trace stream/frame information & summary [media] st-delta: add mjpeg support [media] st-delta: EOS (End Of Stream) support [media] st-delta: rpmsg ipc support [media] st-delta: add memory allocator helper functions [media] st-delta: STiH4xx multi-format video decoder v4l2 driver [media] MAINTAINERS: add st-delta driver [media] ARM: multi_v7_defconfig: enable STMicroelectronics DELTA Support ...
-
