- 02 Jul, 2020 32 commits
-
-
Edward Cree authored
_down() merely removes all our filters and VLANs, it doesn't free efx->filter_state itself. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
EF100 doesn't need to split up large DMAs. Signed-off-by:
-
Edward Cree authored
Since we only allocate VIs for the number of TXQs we actually need, we cannot naively use "channel * TXQ_TYPES + txq" for the TXQ number, as this has gaps (when efx->tx_queues_per_channel < EFX_TXQ_TYPES) and thus overruns the driver's VI allocations, causing the firmware to reject the MC_CMD_INIT_TXQ based on INSTANCE. Thus, we distinguish INSTANCE (stored in tx_queue->queue) from LABEL (tx_queue->label); the former is allocated starting from 0 in efx_set_channels(), while the latter is simply the txq type (index in channel->tx_queue array). To simplify things, rather than changing tx_queues_per_channel after setting up TXQs, make Siena always probe its HIGHPRI queues at start of day, rather than deferring it until tc mqprio enables them. Signed-off-by:
-
Edward Cree authored
While we're at it, also check them for failure. Signed-off-by:
-
Edward Cree authored
Siena needs four TX queues (csum * highpri), EF10 needs two (csum), and EF100 only needs one (as checksumming is controlled entirely by the transmit descriptor). Rather than having various bits of ad-hoc code to decide which queues to set up etc., put the knowledge of how many TXQs a channel has in one place. Signed-off-by:
-
Edward Cree authored
Instead of exposing this old module parameter on the new driver (thus having to keep it forever after for compatibility), let's confine it to the old one; if we find later that we need the feature, we ought to support it properly, with ethtool set-channels. Signed-off-by:
-
Edward Cree authored
EF100 only supports MSI-X, so there's no need for the new driver to expose this old module parameter. Since it's now visible to the linker, we have to rename it internally to efx_interrupt_mode to avoid symbol collisions in non-modular builds. Signed-off-by:
-
Edward Cree authored
All NICs supported by this driver are capable of MSI-X interrupts (only Falcon A1 wasn't, and that's now hived off into its own driver), so no need for a nic-type parameter. Besides, the code that checked it was buggy anyway (the following assignment that checked min_interrupt_mode overrode it). Signed-off-by:
-
Edward Cree authored
Unprivileged functions (such as VFs) may set their MTU by use of the 'control' field of MC_CMD_SET_MAC_EXT, as used in efx_mcdi_set_mtu(). If calling efx_ef10_mac_reconfigure() from efx_change_mtu(), and the NIC supports the above (SET_MAC_ENHANCED capability), use it rather than efx_mcdi_set_mac(). Signed-off-by:
-
Colin Ian King authored
The variable act is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: simplify endpoint programming Add tests to functions so they don't update undefined endpoint registers, rather than requiring the caller to avoid calling them. Move the call to a workaround function required when suspending inside the function that puts an endpoint into suspend mode. This requires moving a few functions (which are otherwise unchanged). Then simplify ipa_endpoint_program() to call essentially all endpoint register update functions unconditionally. ==================== Signed-off-by: -
Alex Elder authored
Have functions that write endpoint configuration registers return immediately if they are not valid for the direction of transfer for the endpoint. This allows most of the calls in ipa_endpoint_program() to be made unconditionally. Reorder the register writes to match the order of their definition (based on offset). Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
IPA version 4.0+ does not support endpoint suspend. Put a test at the top of ipa_endpoint_program_suspend() that returns immediately if suspend is not supported rather than making that check in the caller. Signed-off-by:
-
Alex Elder authored
IPA version 3.5.1 has a hardware quirk that requires special handling if an RX endpoint is suspended while aggregation is active. This handling is implemented by ipa_endpoint_suspend_aggr(). Have ipa_endpoint_program_suspend() be responsible for calling ipa_endpoint_suspend_aggr() if suspend mode is being enabled on an endpoint. If the endpoint does not support aggregation, or if aggregation isn't active, this call will continue to have no effect. Move the definition of ipa_endpoint_suspend_aggr() up in the file so its definition precedes the new earlier reference to it. This requires ipa_endpoint_aggr_active() and ipa_endpoint_force_close() to be moved as well. Signed-off-by:
-
Alex Elder authored
IPA version 4.2 has a hardware quirk that affects endpoint delay mode, so it isn't used there. Isolate the test that avoids using delay mode for that version inside ipa_endpoint_program_delay(), rather than making that check in the caller. Signed-off-by:
-
Wei Yongjun authored
In certain configurations without power management support, the following warnings happen: drivers/net/ethernet/mellanox/mlx4/main.c:4388:12: warning: 'mlx4_resume' defined but not used [-Wunused-function] 4388 | static int mlx4_resume(struct device *dev_d) | ^~~~~~~~~~~ drivers/net/ethernet/mellanox/mlx4/main.c:4373:12: warning: 'mlx4_suspend' defined but not used [-Wunused-function] 4373 | static int mlx4_suspend(struct device *dev_d) | ^~~~~~~~~~~~ Mark these functions as __maybe_unused to make it clear to the compiler that this is going to happen based on the configuration, which is the standard for these types of functions. Fixes: 0e3e206a ("mlx4: use generic power management") Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Wei Yongjun authored
In certain configurations without power management support, gcc report the following warning: drivers/net/ethernet/micrel/ksz884x.c:7182:12: warning: 'pcidev_suspend' defined but not used [-Wunused-function] 7182 | static int pcidev_suspend(struct device *dev_d) | ^~~~~~~~~~~~~~ Mark pcidev_suspend() as __maybe_unused to make it clear. Fixes: 64120615 ("ksz884x: use generic power management") Reported-by: -
David S. Miller authored
Claudiu Beznea says: ==================== net: macb: few code cleanups Patches in this series cleanup a bit macb code. Changes in v2: - in patch 2/4 use hweight32() instead of hweight_long() ==================== Signed-off-by: -
Claudiu Beznea authored
Remove is_udp variable that is used in only one place and use ip_hdr(skb)->protocol == IPPROTO_UDP check instead. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
-
Claudiu Beznea authored
Do not initialize queue variable. It is already initialized in for loops. Signed-off-by:
-
Claudiu Beznea authored
Use hweight32() to count set bits in queue_mask. Signed-off-by:
-
Claudiu Beznea authored
Bit 0 of queue_mask is set at the beginning of macb_probe_queues() function. Do not set it again after reading DGFG6 but instead use "|=" operator. Signed-off-by:
-
David S. Miller authored
Horatiu Vultur says: ==================== bridge: mrp: Add support for getting the status This patch series extends the MRP netlink interface to allow the userspace daemon to get the status of the MRP instances in the kernel. v3: - remove misleading comment - fix to use correctly the RCU v2: - fix sparse warnings ==================== Signed-off-by: -
Horatiu Vultur authored
This patch extends the function br_fill_ifinfo to return also the MRP status for each instance on a bridge. It also adds a new filter RTEXT_FILTER_MRP to return the MRP status only when this is set, not to interfer with the vlans. The MRP status is return only on the bridge interfaces. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Horatiu Vultur authored
Add the function br_mrp_fill_info which populates the MRP attributes regarding the status of each MRP instance. Signed-off-by:
-
Horatiu Vultur authored
Add MRP attribute IFLA_BRIDGE_MRP_INFO to allow the userspace to get the current state of the MRP instances. This is a nested attribute that contains other attributes like, ring id, index of primary and secondary port, priority, ring state, ring role. Signed-off-by:
-
David S. Miller authored
Florian Westphal says: ==================== mptcp: add receive buffer auto-tuning First patch extends the test script to allow for reproducible results. Second patch adds receive auto-tuning. Its based on what TCP is doing, only difference is that we use the largest RTT of any of the subflows and that we will update all subflows with the new value. Else, we get spurious packet drops because the mptcp work queue might not be able to move packets from subflow socket to master socket fast enough. Without the adjustment, TCP may drop the packets because the subflow socket is over its rcvbuffer limit. ==================== Signed-off-by: -
Florian Westphal authored
When mptcp is used, userspace doesn't read from the tcp (subflow) socket but from the parent (mptcp) socket receive queue. skbs are moved from the subflow socket to the mptcp rx queue either from 'data_ready' callback (if mptcp socket can be locked), a work queue, or the socket receive function. This means tcp_rcv_space_adjust() is never called and thus no receive buffer size auto-tuning is done. An earlier (not merged) patch added tcp_rcv_space_adjust() calls to the function that moves skbs from subflow to mptcp socket. While this enabled autotuning, it also meant tuning was done even if userspace was reading the mptcp socket very slowly. This adds mptcp_rcv_space_adjust() and calls it after userspace has read data from the mptcp socket rx queue. Its very similar to tcp_rcv_space_adjust, with two differences: 1. The rtt estimate is the largest one observed on a subflow 2. The rcvbuf size and window clamp of all subflows is adjusted to the mptcp-level rcvbuf. Otherwise, we get spurious drops at tcp (subflow) socket level if the skbs are not moved to the mptcp socket fast enough. Before: time mptcp_connect.sh -t -f $((4*1024*1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap [..] ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 40823ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 23119ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5421ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 41446ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 23427ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5426ms) [ OK ] Time: 1396 seconds After: ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 5417ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 5427ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5422ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 5415ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 5422ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5423ms) [ OK ] Time: 296 seconds Signed-off-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Florian Westphal authored
The script generates two random files that are then sent via tcp and mptcp connections. In order to compare throughput over consecutive runs add an option to provide the file size on the command line: "-f 128000". Also add an option, -t, to enable tcp tests. This is useful to compare throughput of mptcp connections and tcp connections. Example: run tests with a 4mb file size, 300ms delay 0.01% loss, default gso/tso/gro settings and with large write/blocking io: mptcp_connect.sh -t -f $((4 * 1024 * 1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap Signed-off-by:
-
Danny Lin authored
Similar to fq_codel and the other qdiscs that can set as default, fq_pie is also suitable for general use without explicit configuration, which makes it a valid choice for this. This is useful in situations where a painless out-of-the-box solution for reducing bufferbloat is desired but fq_codel is not necessarily the best choice. For example, fq_pie can be better for DASH streaming, but there could be more cases where it's the better choice of the two simple AQMs available in the kernel. Signed-off-by:
Danny Lin <danny@kdrag0n.dev> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-07-01 This series contains updates to all Intel drivers, but a majority of the changes are to the i40e driver. Jeff converts 'fall through' comments to the 'fallthrough;' keyword for all Intel drivers. Removed unnecessary delay in the ixgbe ethtool diagnostics test. Arkadiusz implements Total Port Shutdown for i40e. This is the revised patch based on Jakub's feedback from an earlier submission of this patch, where additional code comments and description was needed to describe the functionality. Wei Yongjun fixes return error code for iavf_init_get_resources(). Magnus optimizes XDP code in i40e; starting with AF_XDP zero-copy transmit completion path. Then by only executing a division when necessary in the napi_poll data path. Move the check for transmit ring full outside the send loop to increase performance. Ciara add XDP ring statistics to i40e and the ability to dump these statistics and descriptors. Tony fixes reporting iavf statistics. Radoslaw adds support for 2.5 and 5 Gbps by implementing the newer ethtool ksettings API in ixgbe. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2020-07-01 This series contains updates to the ice driver only. Jacob implements a devlink region for device capabilities. Bruce removes structs containing only one-element arrays that are either unused or only used for indexing. Instead, use pointer arithmetic or other indexing to access the elements. Converts "C struct hack" variable-length types to the preferred C99 flexible array member. ==================== Signed-off-by:
-
- 01 Jul, 2020 8 commits
-
-
Bruce Allan authored
Convert the pre-C90-extension "C struct hack" method (using a single- element array at the end of a structure for implementing variable-length types) to the preferred use of C99 flexible array member. Additional code cleanups were done near areas affected by this change. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Bruce Allan authored
There are a number of structures that consist of a one-element array as the only struct member. Some of those are unused so remove them. Others are used to index into a buffer/array consisting of a variable number of a different data or structure type. Those are unnecessary since we can use simple pointer arithmetic or index directly into the buffer to access individual elements of the buffer/array. Additional code cleanups were done near areas affected by this change. Signed-off-by:
-
Jarod Wilson authored
At the moment, bonding xfrm crypto offload can only be set up if the bonding module is loaded with active-backup mode already set. We need to be able to make this work with bonds set to AB after the bonding driver has already been loaded. So what's done here is: 1) move #define BOND_XFRM_FEATURES to net/bonding.h so it can be used by both bond_main.c and bond_options.c 2) set BOND_XFRM_FEATURES in bond_dev->hw_features universally, rather than only when loading in AB mode 3) wire up xfrmdev_ops universally too 4) disable BOND_XFRM_FEATURES in bond_dev->features if not AB 5) exit early (non-AB case) from bond_ipsec_offload_ok, to prevent a performance hit from traversing into the underlying drivers 5) toggle BOND_XFRM_FEATURES in bond_dev->wanted_features and call netdev_change_features() from bond_option_mode_set() In my local testing, I can change bonding modes back and forth on the fly, have hardware offload work when I'm in AB, and see no performance penalty to non-AB software encryption, despite having xfrm bits all wired up for all modes now. Fixes: 18cb261a ("bonding: support hardware encryption offload to slaves") Reported-by:
Huy Nguyen <huyn@mellanox.com> CC: Saeed Mahameed <saeedm@mellanox.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jakub Kicinski <kuba@kernel.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: netdev@vger.kernel.org CC: intel-wired-lan@lists.osuosl.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Jacob Keller authored
Add a new devlink region used for capturing a snapshot of the device capabilities buffer which is reported by the firmware over the AdminQ. This information can useful in debugging driver and firmware interactions. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: endpoint configuration updates This series updates code that configures IPA endpoints. The changes made mainly affect access to registers that are valid only for RX, or only for TX endpoints. The first three patches avoid writing endpoint registers if they are not defined to be valid. The fourth patch slightly modifies the parameters for the offset macros used for these endpoint registers, to make it explicit when only some endpoints are valid. The last patch just tweaks one line of code so it uses a convention used everywhere else in the driver. Version 2 of this series eliminates some of the "assert()" comments that Jakub inquired about. The ones removed will actually go away in an upcoming (not-yet-posted) patch series anyway. ==================== Signed-off-by: -
Alex Elder authored
The convention throughout the IPA driver is to directly use single-bit field mask values, rather than using (for example) u32_encode_bits() to set or clear them. Fix the one place that doesn't follow that convention, which sets HOL_BLOCK_EN_FMASK in ipa_endpoint_init_hol_block_enable(). Signed-off-by:
-
Alex Elder authored
A handful of registers are valid only for RX endpoints, and some others are valid only for TX endpoints. For these endpoints, add a comment above their defined offset macro that indicates the endpoints to which they apply. Extend the endpoint parameter naming convention as well, to make these constraints more explicit. Signed-off-by:
-
Alex Elder authored
The INIT_MODE endpoint configuration register is only valid for TX endpoints. Rather than writing a zero to that register for RX endpoints, avoid writing the register at all. Signed-off-by:
-
