An error occurred fetching the project authors.
- 31 Jul, 2008 6 commits
-
-
Pavel Emelyanov authored
Deleting a timer with del_timer doesn't guarantee, that the timer function is not running at the moment of deletion. Thus in the xt_hashlimit case we can get into a ticklish situation when the htable_gc rearms the timer back and we'll actually delete an entry with a pending timer. Fix it with using del_timer_sync(). AFAIK del_timer_sync checks for the timer to be pending by itself, so I remove the check. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
The thing is that recent_mt_destroy first flushes the entries from table with the recent_table_flush and only *after* this removes the proc file, corresponding to that table. Thus, if we manage to write to this file the '+XXX' command we will leak some entries. If we manage to write there a 'clean' command we'll race in two recent_table_flush flows, since the recent_mt_destroy calls this outside the recent_lock. The proper solution as I see it is to remove the proc file first and then go on with flushing the table. This flushing becomes safe w/o the lock, since the table is already inaccessible from the outside. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
In order to time out dead connections quicker, keep track of outstanding data and cap the timeout. Suggested by Herbert Xu. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matthew Garrett authored
This is necessary to set the dongle type on the nsc driver in order to get it to work correctly. Thinkpads all appear to use dongle type 9. This patch defaults nsc devices with an IBM PnP descriptor to use type 9. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Ben Collins <ben.collins@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Michael Frey authored
Preface: The "Broadcom" device is on unreleased hardware, so I can't disclose the actual model. When the Dell 370 and 410 BT adapters are put into BT radio mode, they need to be prepared like many other Broadcom adapters. Also, add quirk Broadcom 2046 devices with HCI_RESET. Reference for this bug: https://launchpad.net/bugs/249448Signed-off-by: Michael Frey <michael.frey@canonical.com> Signed-off-by: Mario Limonciello <Mario_Limonciello@Dell.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Ben Collins <ben.collins@canonical.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Jul, 2008 21 commits
-
-
David Howells authored
Remove the packed attribute from PofTimStamp_tag in the hysdn driver as the thing being packed is just an array of chars and so is unpackable. This deals with a compiler warning: In file included from drivers/isdn/hysdn/hysdn_boot.c:19: drivers/isdn/hysdn/hysdn_pof.h:63: warning: 'packed' attribute ignored for field of type 'unsigned char[40]' Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Harvey Harrison authored
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rafael J. Wysocki authored
Adapt the tg3 driver to use the reworked PCI PM and make it use the exported PCI PM core functions instead of accessing the PCI PM registers directly by itself. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Howells authored
Fix direct casts of pointers to u32 in the InterPhase ATM driver. These are all arguments being passed to printk() calls. So drop the cast and change the %x to a %p. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Howells authored
Fix const assignment/discard warnings in the ATM networking driver. The lane2_assoc_ind() function needed its arguments changing to match changes in the lane2_ops struct (patch 61c33e01 "atm: use const where reasonable"). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Harvey Harrison authored
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
The rationale is: * use u32 consistently * no need to do LCG on values from (better) get_random_bytes * use more data from get_random_bytes for secondary seeding * don't reduce state space on srandom32() * enforce state variable initialization restrictions Note: the second paper has a version of random32() with even longer period and a version of random64() if needed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Simon Wunderlich authored
When bridging interfaces with different MTUs, the bridge correctly chooses the minimum of the MTUs of the physical devices as the bridges MTU. But when a frame is passed which fits through the incoming, but not through the outgoing interface, a "Fragmentation Needed" packet is generated. However, the propagated MTU is hardcoded to 1500, which is wrong in this situation. The sender will repeat the packet again with the same frame size, and the same problem will occur again. Instead of sending 1500, the (correct) MTU value of the bridge is now sent via PMTU. To achieve this, the corresponding rtable structure is stored in its net_bridge structure. Modified to get rid of fake_net_device as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
-
Julia Lawall authored
The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Nobuhiro Iwamatsu authored
SH7763 has Ethernet core same as SH7710/SH7712. Positions of some registry are different, but the basic part is the same. I add support of ethernet of sh7763 to sh_eth. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Mikael Pettersson authored
Trying to build with CONFIG_NE2000=m fails with: scripts/mod/modpost -o /tmp/tmp/linux-2.6.27-rc1/Module.symvers -S -s ERROR: "NS8390_init" [drivers/net/ne.ko] undefined! This is because the split of 8390 into pausing and non-pausing versions was incompletely propagated to ne.c. This fixes it. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Robert P. J. Day authored
Use a menuconfig directive to make all of networking support one-click deselectable from the top-level menu. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Lezcano authored
This call is no longer needed, sockstat6 is per namespace so it is removed at the namespace subsystem destruction. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
From a report by Matti Aarnio, and preliminary patch by Adam Langley. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Bug report from Steven Jan Springl: Issuing the following command causes a kernel oops: tc qdisc add dev eth0 handle ffff: ingress The problem mostly stems from all of the special case handling of ingress qdiscs. So, to fix this, do the grafting operation the same way we do for TX qdiscs. Which means that dev_activate() and dev_deactivate() now do the "qdisc_sleeping <--> qdisc" transitions on dev->rx_queue too. Future simplifications are possible now, mainly because it is impossible for dev_queue->{qdisc,qdisc_sleeping} to be NULL. There are NULL checks all over to handle the ingress qdisc special case that used to exist before this commit. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alan Cox authored
From: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Peter Korsgaard authored
dm_{read,write}() were doing USB transfers of data on stack, which isn't allowed. Fix it by kmalloc'ing a temporary buffer. Clean up the error handling for short transfers while we're at it. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Andreas Schwab authored
The callers of niu_ethflow_to_class expect zero as error, but it returns -1 instead. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Miao Xie authored
When an error occured, datagram_send_ctl() should exit immediately rather than continue to run the for loop. Otherwise, the variable err might be changed and the error might be hidden. Fix this bug by using "goto" instead of "break". Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 29 Jul, 2008 13 commits
-
-
Breno Leitao authored
On s2io driver, when you change the interface MTU, it invokes a card reset, which flush some statistics. This patch solves this problem, and also set the net_device->stats as the default statistics structure, instead of s2io_nic->stats. To do that, s2io_nic->stats turned into a staging area, where is saved statistics of the last hardware statistics query. So, the difference between the current hardware statistics and s2io_nic->stats, is the value that should be summed up, in order to get the correct statistics value, even after a reset. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
David Brownell authored
Recent changes to the IRQ framework have made passing the wrong trigger type to request_irq() become a fatal error. In the case of the enc28j60 driver, it stopped working in my test harness. (Specifically: the signal detects "pin change" events, both edges, not just falling edges. Similarly, other boards might route it through an inverter. Trigger type are board-specific.) This fixes that problem by the usual fix of expecting board setup code to have set up the correct IRQ trigger type. The best known example of that being x86 setup. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Stephen Hemminger authored
skb->dev is set by eth_type_trans already. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
-
Steve Wise authored
Starting with FW version 7.0, the driver needs to allow larger images. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Michael Hennerich authored
Reprogram MAC address after resume from Suspend Mem (Blackfin Hibernate looses all CORE and SYSTEM register content) Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Bryan Wu authored
Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Mike Frysinger authored
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Ayaz Abdulla authored
This patch adds support for the realtek 8211c phy. The driver must perform a hardware reset of the phy due to an errata where the phy could not detect the link. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Luis Carlos Cobo authored
This patch fixes mesh beaconing, which was broken by "mac80211: revamp beacon configuration". Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vegard Nossum authored
The semantic patch I used was this: @@ expression lock; identifier flags; expression subclass; @@ - unsigned int flags; + unsigned long flags; ... <+... ( spin_lock_irqsave(lock, flags) | _spin_lock_irqsave(lock) | spin_unlock_irqrestore(lock, flags) | _spin_unlock_irqrestore(lock, flags) | read_lock_irqsave(lock, flags) | _read_lock_irqsave(lock) | read_unlock_irqrestore(lock, flags) | _read_unlock_irqrestore(lock, flags) | write_lock_irqsave(lock, flags) | _write_lock_irqsave(lock) | write_unlock_irqrestore(lock, flags) | _write_unlock_irqrestore(lock, flags) | spin_lock_irqsave_nested(lock, flags, subclass) | _spin_lock_irqsave_nested(lock, subclass) | spin_unlock_irqrestore(lock, flags) | _spin_unlock_irqrestore(lock, flags) | _raw_spin_lock_flags(lock, flags) | __raw_spin_lock_flags(lock, flags) ) ...+> This patch was generated using the Coccinelle framework. Cc: Masakazu Mokuno <mokuno@sm.sony.co.jp> Cc: Julia Lawall <julia@diku.dk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
The master interface is a virtual interface that is registered to mac80211, changing that does not seem like a good idea at the moment. However, since it has no sdata, we cannot accept any configuration for it. This patch makes the cfg80211 hooks reject any such attempt. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Julius Volz pointed out that the dump callbacks in nl80211 were broken and fixed one of them. This patch fixes the other three and also addresses the TODOs there. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Julius Volz <juliusv@google.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-