Pull gpio fixes from Bartosz Golaszewski:
 "Two OF lookup quirks and one fix for an issue in the generic gpio-mmio
  driver:

   - add two OF lookup quirks for TSC2005 and MIPS Lantiq

   - don't try to figure out bgpio_bits from the 'ngpios' property in
     gpio-mmio"

* tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: of: add polarity quirk for TSC2005
  gpio: mmio: do not calculate bgpio_bits via "ngpios"
  gpiolib: of: fix lookup quirk for MIPS Lantiq

Pull TPM fixes from Jarkko Sakkinen:
 "This contains the fixes for !chip->auth condition, preventing the
  breakage of:
   - tpm_ftpm_tee.c
   - tpm_i2c_nuvoton.c
   - tpm_ibmvtpm.c
   - tpm_tis_i2c_cr50.c
   - tpm_vtpm_proxy.c

  All drivers will continue to work as they did in 6.9, except a single
  warning (dev_warn() not WARN()) is printed to klog only to inform that
  authenticated sessions are not enabled"

* tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: Address !chip->auth in tpm_buf_append_hmac_session*()
  tpm: Address !chip->auth in tpm_buf_append_name()
  tpm: Address !chip->auth in tpm2_*_auth_session()

Pull kvm fix from Paolo Bonzini:

 - s390: fix support for z16 systems

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: fix LPSWEY handling

DTS for Nokia N900 incorrectly specifies "active high" polarity for
the reset line, while the chip documentation actually specifies it as
"active low".  In the past the driver fudged gpiod API and inverted
the logic internally, but it was changed in d0d89493.

Fixes: d0d89493 ("Input: tsc2004/5 - switch to using generic device properties")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZoWXwYtwgJIxi-hD@google.comSigned-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Merge tag 'kvm-s390-master-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fix z16 support

The z16 support might fail with the lpswey instruction. Provide a
handler.

Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_hmac_session*().  Thus, address
!chip->auth in tpm_buf_hmac_session*() and remove the fallback
implementation for !TCG_TPM2_HMAC.

Cc: stable@vger.kernel.org # v6.9+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: 1085b827 ("tpm: Add the rest of the session HMAC API")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_append_name().  Thus, address
!chip->auth in tpm_buf_append_name() and remove the fallback
implementation for !TCG_TPM2_HMAC.

Cc: stable@vger.kernel.org # v6.10+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: d0a25bb9 ("tpm: Add HMAC session name/handle append")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can cause
a null derefence in tpm2_*_auth_session(). Thus, address !chip->auth in
tpm2_*_auth_session().

Cc: stable@vger.kernel.org # v6.9+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: 699e3efd ("tpm: Add HMAC session start and end functions")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Pull btrfs fixes from David Sterba:

 - fix folio refcounting when releasing them (encoded write, dummy
   extent buffer)

 - fix out of bounds read when checking qgroup inherit data

 - fix how configurable chunk size is handled in zoned mode

 - in the ref-verify tool, fix uninitialized return value when checking
   extent owner ref and simple quota are not enabled

* tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix folio refcount in __alloc_dummy_extent_buffer()
  btrfs: fix folio refcount in btrfs_do_encoded_write()
  btrfs: fix uninitialized return value in the ref-verify tool
  btrfs: always do the basic checks for btrfs_qgroup_inherit structure
  btrfs: zoned: fix calc_available_free_space() for zoned mode

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, wireless and netfilter.

  There's one fix for power management with Intel's e1000e here,
  Thorsten tells us there's another problem that started in v6.9. We're
  trying to wrap that up but I don't think it's blocking.

  Current release - new code bugs:

   - wifi: mac80211: disable softirqs for queued frame handling

   - af_unix: fix uninit-value in __unix_walk_scc(), with the new
     garbage collection algo

  Previous releases - regressions:

   - Bluetooth:
      - qca: fix BT enable failure for QCA6390 after warm reboot
      - add quirk to ignore reserved PHY bits in LE Extended Adv Report,
        abused by some Broadcom controllers found on Apple machines

   - wifi: wilc1000: fix ies_len type in connect path

  Previous releases - always broken:

   - tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(),
     avoid premature timeouts

   - net: make sure skb_datagram_iter maps fragments page by page, in
     case we somehow get compound highmem mixed in

   - eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when more
     queues are used

  Misc:

   - MAINTAINERS: Remembering Larry Finger"

* tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
  bnxt_en: Fix the resource check condition for RSS contexts
  mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
  inet_diag: Initialize pad field in struct inet_diag_req_v2
  tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
  selftests: make order checking verbose in msg_zerocopy selftest
  selftests: fix OOM in msg_zerocopy selftest
  ice: use proper macro for testing bit
  ice: Reject pin requests with unsupported flags
  ice: Don't process extts if PTP is disabled
  ice: Fix improper extts handling
  selftest: af_unix: Add test case for backtrack after finalising SCC.
  af_unix: Fix uninit-value in __unix_walk_scc()
  bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
  net: rswitch: Avoid use-after-free in rswitch_poll()
  netfilter: nf_tables: unconditionally flush pending work before notifier
  wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
  wifi: iwlwifi: mvm: avoid link lookup in statistics
  wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
  wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
  wifi: wilc1000: fix ies_len type in connect path
  ...

Pull s390 fixes from Heiko Carstens:

 - Fix and add physical to virtual address translations in dasd and
   virtio_ccw drivers. For virtio_ccw this is just a minimal fix.
   More code cleanup will follow.

 - Small defconfig updates

* tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/dasd: Fix invalid dereferencing of indirect CCW data pointer
  s390/vfio_ccw: Fix target addresses of TIC CCWs
  s390: Update defconfigs

Merge tag 'platform-drivers-x86-v6.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fix from Hans de Goede:

 - Fix regression in toshiba_acpi introduced in 6.10-rc1

* tag 'platform-drivers-x86-v6.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: toshiba_acpi: Fix quickstart quirk handling

Pull Kselftest fix from Mickaël Salaün:
 "Fix Kselftests timeout.

  We can't use CLONE_VFORK, since that blocks the parent - and thus the
  timeout handling - until the child exits or execve's.

  Go back to using plain fork()"

* tag 'kselftest-fix-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  selftests/harness: Fix tests timeout and race condition

Merge tag 'mm-hotfixes-stable-2024-07-03-22-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from, Andrew Morton:
 "6 hotfies, all cc:stable. Some fixes for longstanding nilfs2 issues
  and three unrelated MM fixes"

* tag 'mm-hotfixes-stable-2024-07-03-22-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  nilfs2: fix incorrect inode allocation from reserved inodes
  nilfs2: add missing check for inode numbers on directory entries
  nilfs2: fix inode number range checks
  mm: avoid overflows in dirty throttling logic
  Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again"
  mm: optimize the redundant loop of mm_update_owner_next()

While creating a new RSS context, bnxt_rfs_capable() currently
makes a strict check to see if the required VNICs are already
available.  If the current VNICs are not what is required,
either too many or not enough, it will call the firmware to
reserve the exact number required.

There is a bug in the firmware when the driver tries to
relinquish some reserved VNICs and RSS contexts.  It will
cause the default VNIC to lose its RSS configuration and
cause receive packets to be placed incorrectly.

Workaround this problem by skipping the resource reduction.
The driver will not reduce the VNIC and RSS context reservations
when a context is deleted.  The resources will be available for
use when new contexts are created later.

Potentially, this workaround can cause us to run out of VNIC
and RSS contexts if there are a lot of VF functions creating
and deleting RSS contexts.  In the future, we will conditionally
disable this workaround when the firmware fix is available.

Fixes: 438ba39b ("bnxt_en: Improve RSS context reservation infrastructure")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/netdev/20240625010210.2002310-1-kuba@kernel.org/Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240703180112.78590-1-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In case of invalid INI file mlxsw_linecard_types_init() deallocates memory
but doesn't reset pointer to NULL and returns 0. In case of any error
occurred after mlxsw_linecard_types_init() call, mlxsw_linecards_init()
calls mlxsw_linecard_types_fini() which performs memory deallocation again.

Add pointer reset to NULL.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: b217127e ("mlxsw: core_linecards: Add line card objects and implement provisioning")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20240703203251.8871-1-amishin@t-argos.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kalle Valo says:

====================
wireless fixes for v6.10

Hopefully the last fixes for v6.10. Fix a regression in wilc1000
where bitrate Information Elements longer than 255 bytes were broken.
Few fixes also to mac80211 and iwlwifi.

* tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
  wifi: iwlwifi: mvm: avoid link lookup in statistics
  wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
  wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
  wifi: wilc1000: fix ies_len type in connect path
  wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP
====================

Link: https://patch.msgid.link/20240704111431.11DEDC3277B@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following batch contains a oneliner patch to inconditionally flush
workqueue containing stale objects to be released, syzbot managed to
trigger UaF. Patch from Florian Westphal.

netfilter pull request 24-07-04

* tag 'nf-24-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: unconditionally flush pending work before notifier
====================

Link: https://patch.msgid.link/20240703223304.1455-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw
sockets uses the pad field in struct inet_diag_req_v2 for the
underlying protocol. This field corresponds to the sdiag_raw_protocol
field in struct inet_diag_req_raw.

inet_diag_get_exact_compat() converts inet_diag_req to
inet_diag_req_v2, but leaves the pad field uninitialized. So the issue
occurs when raw_lookup() accesses the sdiag_raw_protocol field.

Fix this by initializing the pad field in
inet_diag_get_exact_compat(). Also, do the same fix in
inet_diag_dump_compat() to avoid the similar issue in the future.

[1]
BUG: KMSAN: uninit-value in raw_lookup net/ipv4/raw_diag.c:49 [inline]
BUG: KMSAN: uninit-value in raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71
 raw_lookup net/ipv4/raw_diag.c:49 [inline]
 raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71
 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99
 inet_diag_cmd_exact+0x7d9/0x980
 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline]
 inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426
 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282
 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564
 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297
 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
 netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361
 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg+0x332/0x3d0 net/socket.c:745
 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585
 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639
 __sys_sendmsg net/socket.c:2668 [inline]
 __do_sys_sendmsg net/socket.c:2677 [inline]
 __se_sys_sendmsg net/socket.c:2675 [inline]
 __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675
 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Uninit was stored to memory at:
 raw_sock_get+0x650/0x800 net/ipv4/raw_diag.c:71
 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99
 inet_diag_cmd_exact+0x7d9/0x980
 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline]
 inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426
 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282
 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564
 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297
 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
 netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361
 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg+0x332/0x3d0 net/socket.c:745
 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585
 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639
 __sys_sendmsg net/socket.c:2668 [inline]
 __do_sys_sendmsg net/socket.c:2677 [inline]
 __se_sys_sendmsg net/socket.c:2675 [inline]
 __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675
 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Local variable req.i created at:
 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1396 [inline]
 inet_diag_rcv_msg_compat+0x2a6/0x530 net/ipv4/inet_diag.c:1426
 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282

CPU: 1 PID: 8888 Comm: syz-executor.6 Not tainted 6.10.0-rc4-00217-g35bb670d #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014

Fixes: 432490f9 ("net: ip, diag -- Add diag interface for raw sockets")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240703091649.111773-1-syoshida@redhat.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When we process segments with TCP AO, we don't check it in
tcp_parse_options().  Thus, opt_rx->saw_unknown is set to 1,
which unconditionally triggers the BPF TCP option parser.

Let's avoid the unnecessary BPF invocation.

Fixes: 0a3a8090 ("net/tcp: Verify inbound TCP-AO signed segments")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240703033508.6321-1-kuniyu@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Zijian Zhang says:

====================
fix OOM and order check in msg_zerocopy selftest

In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit
dfa2f048 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.

Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.

And, we find that when lock debugging is on, notifications may not come in
order. Thus, we have order checking outputs managed by cfg_verbose, to
avoid too many outputs in this case.
====================

Link: https://patch.msgid.link/20240701225349.3395580-1-zijianzhang@bytedance.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We find that when lock debugging is on, notifications may not come in
order. Thus, we have order checking outputs managed by cfg_verbose, to
avoid too many outputs in this case.

Fixes: 07b65c5b ("test: add msg_zerocopy test")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240701225349.3395580-3-zijianzhang@bytedance.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit
dfa2f048 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.

Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.

Fixes: 07b65c5b ("test: add msg_zerocopy test")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240701225349.3395580-2-zijianzhang@bytedance.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-06-25 (ice)

This series contains updates to ice driver only.

Milena adds disabling of extts events when PTP is disabled.

Jake prevents possible NULL pointer by checking that timestamps are
ready before processing extts events and adds checks for unsupported
PTP pin configuration.

Petr Oros replaces _test_bit() with the correct test_bit() macro.
v1: https://lore.kernel.org/netdev/20240625170248.199162-1-anthony.l.nguyen@intel.com/
====================

Link: https://patch.msgid.link/20240702171459.2606611-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Do not use _test_bit() macro for testing bit. The proper macro for this
is one without underline.

_test_bit() is what test_bit() was prior to const-optimization. It
directly calls arch_test_bit(), i.e. the arch-specific implementation
(or the generic one). It's strictly _internal_ and shouldn't be used
anywhere outside the actual test_bit() macro.

test_bit() is a wrapper which checks whether the bitmap and the bit
number are compile-time constants and if so, it calls the optimized
function which evaluates this call to a compile-time constant as well.
If either of them is not a compile-time constant, it just calls _test_bit().
test_bit() is the actual function to use anywhere in the kernel.

IOW, calling _test_bit() avoids potential compile-time optimizations.

The sensors is not a compile-time constant, thus most probably there
are no object code changes before and after the patch.
But anyway, we shouldn't call internal wrappers instead of
the actual API.

Fixes: 4da71a77 ("ice: read internal temperature sensor")
Acked-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-5-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The driver receives requests for configuring pins via the .enable
callback of the PTP clock object. These requests come into the driver
with flags which modify the requested behavior from userspace. Current
implementation in ice does not reject flags that it doesn't support.
This causes the driver to incorrectly apply requests with such flags as
PTP_PEROUT_DUTY_CYCLE, or any future flags added by the kernel which it
is not yet aware of.

Fix this by properly validating flags in both ice_ptp_cfg_perout and
ice_ptp_cfg_extts. Ensure that we check by bit-wise negating supported
flags rather than just checking and rejecting known un-supported flags.
This is preferable, as it ensures better compatibility with future
kernels.

Fixes: 172db5f9 ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-4-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The ice_ptp_extts_event() function can race with ice_ptp_release() and
result in a NULL pointer dereference which leads to a kernel panic.

Panic occurs because the ice_ptp_extts_event() function calls
ptp_clock_event() with a NULL pointer. The ice driver has already
released the PTP clock by the time the interrupt for the next external
timestamp event occurs.

To fix this, modify the ice_ptp_extts_event() function to check the
PTP state and bail early if PTP is not ready.

Fixes: 172db5f9 ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-3-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Extts events are disabled and enabled by the application ts2phc.
However, in case where the driver is removed when the application is
running, a specific extts event remains enabled and can cause a kernel
crash.
As a side effect, when the driver is reloaded and application is started
again, remaining extts event for the channel from a previous run will
keep firing and the message "extts on unexpected channel" might be
printed to the user.

To avoid that, extts events shall be disabled when PTP is released.

Fixes: 172db5f9 ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-2-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzkaller reported a KMSAN splat in __unix_walk_scc() while backtracking
edge_stack after finalising SCC.

Let's add a test case exercising the path.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://patch.msgid.link/20240702160428.10153-2-syoshida@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

KMSAN reported uninit-value access in __unix_walk_scc() [1].

In the list_for_each_entry_reverse() loop, when the vertex's index
equals it's scc_index, the loop uses the variable vertex as a
temporary variable that points to a vertex in scc. And when the loop
is finished, the variable vertex points to the list head, in this case
scc, which is a local variable on the stack (more precisely, it's not
even scc and might underflow the call stack of __unix_walk_scc():
container_of(&scc, struct unix_vertex, scc_entry)).

However, the variable vertex is used under the label prev_vertex. So
if the edge_stack is not empty and the function jumps to the
prev_vertex label, the function will access invalid data on the
stack. This causes the uninit-value access issue.

Fix this by introducing a new temporary variable for the loop.

[1]
BUG: KMSAN: uninit-value in __unix_walk_scc net/unix/garbage.c:478 [inline]
BUG: KMSAN: uninit-value in unix_walk_scc net/unix/garbage.c:526 [inline]
BUG: KMSAN: uninit-value in __unix_gc+0x2589/0x3c20 net/unix/garbage.c:584
 __unix_walk_scc net/unix/garbage.c:478 [inline]
 unix_walk_scc net/unix/garbage.c:526 [inline]
 __unix_gc+0x2589/0x3c20 net/unix/garbage.c:584
 process_one_work kernel/workqueue.c:3231 [inline]
 process_scheduled_works+0xade/0x1bf0 kernel/workqueue.c:3312
 worker_thread+0xeb6/0x15b0 kernel/workqueue.c:3393
 kthread+0x3c4/0x530 kernel/kthread.c:389
 ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

Uninit was stored to memory at:
 unix_walk_scc net/unix/garbage.c:526 [inline]
 __unix_gc+0x2adf/0x3c20 net/unix/garbage.c:584
 process_one_work kernel/workqueue.c:3231 [inline]
 process_scheduled_works+0xade/0x1bf0 kernel/workqueue.c:3312
 worker_thread+0xeb6/0x15b0 kernel/workqueue.c:3393
 kthread+0x3c4/0x530 kernel/kthread.c:389
 ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

Local variable entries created at:
 ref_tracker_free+0x48/0xf30 lib/ref_tracker.c:222
 netdev_tracker_free include/linux/netdevice.h:4058 [inline]
 netdev_put include/linux/netdevice.h:4075 [inline]
 dev_put include/linux/netdevice.h:4101 [inline]
 update_gid_event_work_handler+0xaa/0x1b0 drivers/infiniband/core/roce_gid_mgmt.c:813

CPU: 1 PID: 12763 Comm: kworker/u8:31 Not tainted 6.10.0-rc4-00217-g35bb670d #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Workqueue: events_unbound __unix_gc

Fixes: 3484f063 ("af_unix: Detect Strongly Connected Components.")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240702160428.10153-1-syoshida@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In function bond_option_arp_ip_targets_set(), if newval->string is an
empty string, newval->string+1 will point to the byte after the
string, causing an out-of-bound read.

BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418
Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107
CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6.7.0-rc7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:364 [inline]
 print_report+0xc1/0x5e0 mm/kasan/report.c:475
 kasan_report+0xbe/0xf0 mm/kasan/report.c:588
 strlen+0x7d/0xa0 lib/string.c:418
 __fortify_strlen include/linux/fortify-string.h:210 [inline]
 in4_pton+0xa3/0x3f0 net/core/utils.c:130
 bond_option_arp_ip_targets_set+0xc2/0x910
drivers/net/bonding/bond_options.c:1201
 __bond_opt_set+0x2a4/0x1030 drivers/net/bonding/bond_options.c:767
 __bond_opt_set_notify+0x48/0x150 drivers/net/bonding/bond_options.c:792
 bond_opt_tryset_rtnl+0xda/0x160 drivers/net/bonding/bond_options.c:817
 bonding_sysfs_store_option+0xa1/0x120 drivers/net/bonding/bond_sysfs.c:156
 dev_attr_store+0x54/0x80 drivers/base/core.c:2366
 sysfs_kf_write+0x114/0x170 fs/sysfs/file.c:136
 kernfs_fop_write_iter+0x337/0x500 fs/kernfs/file.c:334
 call_write_iter include/linux/fs.h:2020 [inline]
 new_sync_write fs/read_write.c:491 [inline]
 vfs_write+0x96a/0xd80 fs/read_write.c:584
 ksys_write+0x122/0x250 fs/read_write.c:637
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b
---[ end trace ]---

Fix it by adding a check of string length before using it.

Fixes: f9de11a1 ("bonding: add ip checks when store ip target")
Signed-off-by: Yue Sun <samsun1006219@gmail.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240702-bond-oob-v6-1-2dfdba195c19@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The use-after-free is actually in rswitch_tx_free(), which is inlined in
rswitch_poll(). Since `skb` and `gq->skbs[gq->dirty]` are in fact the
same pointer, the skb is first freed using dev_kfree_skb_any(), then the
value in skb->len is used to update the interface statistics.

Let's move around the instructions to use skb->len before the skb is
freed.

This bug is trivial to reproduce using KFENCE. It will trigger a splat
every few packets. A simple ARP request or ICMP echo request is enough.

Fixes: 271e015b ("net: rswitch: Add unmap_addrs instead of dma address in each desc")
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20240702210838.2703228-1-rrendec@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Another improper use of __folio_put() in an error path after freshly
allocating pages/folios which returns them with the refcount initialized
to 1. The refactor from __free_pages() -> __folio_put() (instead of
folio_put) removed a refcount decrement found in __free_pages() and
folio_put but absent from __folio_put().

Fixes: 13df3775 ("btrfs: cleanup metadata page pointer usage")
CC: stable@vger.kernel.org # 6.8+
Tested-by: Ed Tomlinson <edtoml@gmail.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The conversion to folios switched __free_page() to __folio_put() in the
error path in btrfs_do_encoded_write().

However, this gets the page refcounting wrong. If we do hit that error
path (I reproduced by modifying btrfs_do_encoded_write to pretend to
always fail in a way that jumps to out_folios and running the fstests
case btrfs/281), then we always hit the following BUG freeing the folio:

  BUG: Bad page state in process btrfs  pfn:40ab0b
  page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x61be5 pfn:0x40ab0b
   flags: 0x5ffff0000000000(node=0|zone=2|lastcpupid=0x1ffff)
  raw: 05ffff0000000000 0000000000000000 dead000000000122 0000000000000000
  raw: 0000000000061be5 0000000000000000 00000001ffffffff 0000000000000000
  page dumped because: nonzero _refcount
  Call Trace:
  <TASK>
  dump_stack_lvl+0x3d/0xe0
  bad_page+0xea/0xf0
  free_unref_page+0x8e1/0x900
  ? __mem_cgroup_uncharge+0x69/0x90
  __folio_put+0xe6/0x190
  btrfs_do_encoded_write+0x445/0x780
  ? current_time+0x25/0xd0
  btrfs_do_write_iter+0x2cc/0x4b0
  btrfs_ioctl_encoded_write+0x2b6/0x340

It turns out __free_page() decreases the page reference count while
__folio_put() does not. Switch __folio_put() to folio_put() which
decreases the folio reference count first.

Fixes: 400b172b ("btrfs: compression: migrate compression/decompression paths to folios")
Tested-by: Ed Tomlinson <edtoml@gmail.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

syzbot reports:

KASAN: slab-uaf in nft_ctx_update include/net/netfilter/nf_tables.h:1831
KASAN: slab-uaf in nft_commit_release net/netfilter/nf_tables_api.c:9530
KASAN: slab-uaf int nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597
Read of size 2 at addr ffff88802b0051c4 by task kworker/1:1/45
[..]
Workqueue: events nf_tables_trans_destroy_work
Call Trace:
 nft_ctx_update include/net/netfilter/nf_tables.h:1831 [inline]
 nft_commit_release net/netfilter/nf_tables_api.c:9530 [inline]
 nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597

Problem is that the notifier does a conditional flush, but its possible
that the table-to-be-removed is still referenced by transactions being
processed by the worker, so we need to flush unconditionally.

We could make the flush_work depend on whether we found a table to delete
in nf-next to avoid the flush for most cases.

AFAICS this problem is only exposed in nf-next, with
commit e169285f ("netfilter: nf_tables: do not store nft_ctx in transaction objects"),
with this commit applied there is an unconditional fetch of
table->family which is whats triggering the above splat.

Fixes: 2c9f0293 ("netfilter: nf_tables: flush pending destroy work before netlink notifier")
Reported-and-tested-by: syzbot+4fd66a69358fc15ae2ad@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4fd66a69358fc15ae2adSigned-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Pull tracing fix from Steven Rostedt:
 "Fix ioctl conflict with memmapped ring buffer ioctl

  It was reported that the ioctl() number used to update the ring buffer
  memory mapping conflicted with the TCGETS ioctl causing strace to
  report:

    $ strace -e ioctl stty
    ioctl(0, TCGETS or TRACE_MMAP_IOCTL_GET_READER, {c_iflag=ICRNL|IXON, c_oflag=NL0|CR0|TAB0|BS0|VT0|FF0|OPOST|ONLCR, c_cflag=B38400|CS8|CREAD, c_lflag=ISIG|ICANON|ECHO|ECHOE|ECHOK|IEXTEN|ECHOCTL|ECHOKE, ...}) = 0

  Since this ioctl hasn't been in a full release yet, change it from
  "T", 0x1 to "R" 0x20, and also reserve 0x20-0x2F for future ioctl
  commands, as some more are being worked on for the future"

* tag 'trace-v6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Have memmapped ring buffer use ioctl of "R" range 0x20-2F

To prevent conflicts with other ioctl numbers to allow strace to have an
idea of what is happening, add the range of ioctls for the trace buffer
mapping from _IO("T", 0x1) to the range of "R" 0x20 - 0x2F.

Link: https://lore.kernel.org/linux-trace-kernel/20240630105322.GA17573@altlinux.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240630213626.GA23566@altlinux.org/

Cc: Jonathan Corbet <corbet@lwn.net>
Fixes: cf9f0f7c ("tracing: Allow user-space mapping of the ring-buffer")
Link: https://lore.kernel.org/20240702153354.367861db@rorschach.local.homeReported-by: "Dmitry V. Levin" <ldv@strace.io>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

If the bitmap block that manages the inode allocation status is corrupted,
nilfs_ifile_create_inode() may allocate a new inode from the reserved
inode area where it should not be allocated.

Previous fix commit d325dc6e ("nilfs2: fix use-after-free bug of
struct nilfs_root"), fixed the problem that reserved inodes with inode
numbers less than NILFS_USER_INO (=11) were incorrectly reallocated due to
bitmap corruption, but since the start number of non-reserved inodes is
read from the super block and may change, in which case inode allocation
may occur from the extended reserved inode area.

If that happens, access to that inode will cause an IO error, causing the
file system to degrade to an error state.

Fix this potential issue by adding a wraparound option to the common
metadata object allocation routine and by modifying
nilfs_ifile_create_inode() to disable the option so that it only allocates
inodes with inode numbers greater than or equal to the inode number read
in "nilfs->ns_first_ino", regardless of the bitmap status of reserved
inodes.

Link: https://lkml.kernel.org/r/20240623051135.4180-4-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Syzbot reported that mounting and unmounting a specific pattern of
corrupted nilfs2 filesystem images causes a use-after-free of metadata
file inodes, which triggers a kernel bug in lru_add_fn().

As Jan Kara pointed out, this is because the link count of a metadata file
gets corrupted to 0, and nilfs_evict_inode(), which is called from iput(),
tries to delete that inode (ifile inode in this case).

The inconsistency occurs because directories containing the inode numbers
of these metadata files that should not be visible in the namespace are
read without checking.

Fix this issue by treating the inode numbers of these internal files as
errors in the sanity check helper when reading directory folios/pages.

Also thanks to Hillf Danton and Matthew Wilcox for their initial mm-layer
analysis.

Link: https://lkml.kernel.org/r/20240623051135.4180-3-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+d79afb004be235636ee8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d79afb004be235636ee8Reported-by: Jan Kara <jack@suse.cz>
Closes: https://lkml.kernel.org/r/20240617075758.wewhukbrjod5fp5o@quack3Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "nilfs2: fix potential issues related to reserved inodes".

This series fixes one use-after-free issue reported by syzbot, caused by
nilfs2's internal inode being exposed in the namespace on a corrupted
filesystem, and a couple of flaws that cause problems if the starting
number of non-reserved inodes written in the on-disk super block is
intentionally (or corruptly) changed from its default value.  


This patch (of 3):

In the current implementation of nilfs2, "nilfs->ns_first_ino", which
gives the first non-reserved inode number, is read from the superblock,
but its lower limit is not checked.

As a result, if a number that overlaps with the inode number range of
reserved inodes such as the root directory or metadata files is set in the
super block parameter, the inode number test macros (NILFS_MDT_INODE and
NILFS_VALID_INODE) will not function properly.

In addition, these test macros use left bit-shift calculations using with
the inode number as the shift count via the BIT macro, but the result of a
shift calculation that exceeds the bit width of an integer is undefined in
the C specification, so if "ns_first_ino" is set to a large value other
than the default value NILFS_USER_INO (=11), the macros may potentially
malfunction depending on the environment.

Fix these issues by checking the lower bound of "nilfs->ns_first_ino" and
by preventing bit shifts equal to or greater than the NILFS_USER_INO
constant in the inode number test macros.

Also, change the type of "ns_first_ino" from signed integer to unsigned
integer to avoid the need for type casting in comparisons such as the
lower bound check introduced this time.

Link: https://lkml.kernel.org/r/20240623051135.4180-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20240623051135.4180-2-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>