This code is used at boot and machine checks, so it should be using
early_radix_enabled() (which is usable any time).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This allows MSR[EE]=0 lockups to be detected on an OPAL (bare metal)
system similarly to the hcall NMI IPI on pseries guests, when the
platform/firmware supports it.

This is an example of CPU10 spinning with interrupts hard disabled:

  Watchdog CPU:32 detected Hard LOCKUP other CPUS:10
  Watchdog CPU:10 Hard LOCKUP
  CPU: 10 PID: 4410 Comm: bash Not tainted 4.13.0-rc7-00074-ge89ce1f8-dirty #34
  task: c0000003a82b4400 task.stack: c0000003af55c000
  NIP: c0000000000a7b38 LR: c000000000659044 CTR: c0000000000a7b00
  REGS: c00000000fd23d80 TRAP: 0100   Not tainted  (4.13.0-rc7-00074-ge89ce1f8-dirty)
  MSR: 90000000000c1033 <SF,HV,ME,IR,DR,RI,LE>
  CR: 28422222  XER: 20000000
  CFAR: c0000000000a7b38 SOFTE: 0
  GPR00: c000000000659044 c0000003af55fbb0 c000000001072a00 0000000000000078
  GPR04: c0000003c81b5c80 c0000003c81cc7e8 9000000000009033 0000000000000000
  GPR08: 0000000000000000 c0000000000a7b00 0000000000000001 9000000000001003
  GPR12: c0000000000a7b00 c00000000fd83200 0000000010180df8 0000000010189e60
  GPR16: 0000000010189ed8 0000000010151270 000000001018bd88 000000001018de78
  GPR20: 00000000370a0668 0000000000000001 00000000101645e0 0000000010163c10
  GPR24: 00007fffd14d6294 00007fffd14d6290 c000000000fba6f0 0000000000000004
  GPR28: c000000000f351d8 0000000000000078 c000000000f4095c 0000000000000000
  NIP [c0000000000a7b38] sysrq_handle_xmon+0x38/0x40
  LR [c000000000659044] __handle_sysrq+0xe4/0x270
  Call Trace:
  [c0000003af55fbd0] [c000000000659044] __handle_sysrq+0xe4/0x270
  [c0000003af55fc70] [c000000000659810] write_sysrq_trigger+0x70/0xa0
  [c0000003af55fca0] [c0000000003da650] proc_reg_write+0xb0/0x110
  [c0000003af55fcf0] [c0000000003423bc] __vfs_write+0x6c/0x1b0
  [c0000003af55fd90] [c000000000344398] vfs_write+0xd8/0x240
  [c0000003af55fde0] [c00000000034632c] SyS_write+0x6c/0x110
  [c0000003af55fe30] [c00000000000b220] system_call+0x58/0x6c
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use kernel types for opal_signal_system_reset()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

It is possible to wake from idle due to a system reset exception, in
which case the CPU takes a system reset interrupt to wake from idle,
with system reset as the wakeup reason.

The regular (not idle wakeup) system reset interrupt handler must be
invoked in this case, otherwise the system reset interrupt is lost.

Handle the system reset interrupt immediately after CPU state has been
restored.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The SMP hardlockup watchdog cross-checks other CPUs for lockups, which
causes xmon headaches because it's assuming interrupts hard disabled
means no watchdog troubles. Try to improve that by calling
touch_nmi_watchdog() in obvious places where secondaries are spinning.

Also annotate these spin loops with spin_begin/end calls.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In xmon, touch_nmi_watchdog() is not expected to be checking that
other CPUs have not touched the watchdog, so the code will just call
touch_nmi_watchdog() once before re-enabling hard interrupts.

Just update our CPU's state, and ignore apparently stuck SMP threads.

Arguably touch_nmi_watchdog should check for SMP lockups, and callers
should be fixed, but that's not trivial for the input code of xmon.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If sysctl_hardlockup_all_cpu_backtrace is enabled, there is no need to
IPI stuck CPUs for backtrace before trigger_allbutself_cpu_backtrace(),
which does the same thing again.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The SMP watchdog will detect locked CPUs and IPI them to print a
backtrace and registers. If panic on hard lockup is enabled, do not
panic from this handler, because that can cause recursion into the IPI
layer during the panic.

The caller already panics in this case.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Make sure to set the valid-bit in software-state field of the
populated PE. This was earlier missing for dedicated mode AFUs, hence
was causing a PSL freeze when the AFU was activated.
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The PSL and nMMU need to see all TLB invalidations for the memory
contexts used on the adapter. For the hash memory model, it is done by
making all TLBIs global as soon as the cxl driver is in use. For
radix, we need something similar, but we can refine and only convert
to global the invalidations for contexts actually used by the device.

The new mm_context_add_copro() API increments the 'active_cpus' count
for the contexts attached to the cxl adapter. As soon as there's more
than 1 active cpu, the TLBIs for the context become global. Active cpu
count must be decremented when detaching to restore locality if
possible and to avoid overflowing the counter.

The hash memory model support is somewhat limited, as we can't
decrement the active cpus count when mm_context_remove_copro() is
called, because we can't flush the TLB for a mm on hash. So TLBIs
remain global on hash.
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Fixes: f24be42a ("cxl: Add psl9 specific code")
Tested-by: Alistair Popple <alistair@popple.id.au>
[mpe: Fold in updated comment on the barrier from Fred]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

With the optimizations introduced by commit a46cc7a9
("powerpc/mm/radix: Improve TLB/PWC flushes"), flush_tlb_mm() no
longer flushes the page walk cache (PWC) with radix. This patch
introduces flush_all_mm(), which flushes everything, TLB and PWC, for
a given mm.
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-By: Alistair Popple <alistair@popple.id.au>
[mpe: Add a WARN_ON_ONCE() in the empty hash routines]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

POWER9 DD2.1 and earlier has an issue where some cache inhibited
vector load will return bad data. The workaround is two part, one
firmware/microcode part triggers HMI interrupts when hitting such
loads, the other part is this patch which then emulates the
instructions in Linux.

The affected instructions are limited to lxvd2x, lxvw4x, lxvb16x and
lxvh8x.

When an instruction triggers the HMI, all threads in the core will be
sent to the HMI handler, not just the one running the vector load.

In general, these spurious HMIs are detected by the emulation code and
we just return back to the running process. Unfortunately, if a
spurious interrupt occurs on a vector load that's to normal memory we
have no way to detect that it's spurious (unless we walk the page
tables, which is very expensive). In this case we emulate the load but
we need do so using a vector load itself to ensure 128bit atomicity is
preserved.

Some additional debugfs emulated instruction counters are added also.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Switch CONFIG_PPC_BOOK3S_64 to CONFIG_VSX to unbreak the build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Remove the post_init callback which is only used
by powernv, we can just call it explicitly from
the powernv code.

This partially kills the ability to "disable" eeh at
runtime via debugfs as this was calling that same
callback again, but this is both unused and broken
in several ways. If we want to revive it, we need
to create a dedicated enable/disable callback on the
backend that does the right thing.

Let the bulk of eeh initialize normally at
core_initcall() like it does on pseries by removing
the hack in eeh_init() that delays it.

Instead we make sure our eeh->probe cleanly bails
out of the PEs haven't been created yet and we force
a re-probe where we used to call eeh_init() again.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull DeviceTree fixes from Rob Herring:

 - fix build for !OF providing empty of_find_device_by_node

 - fix Abracon vendor prefix

 - sync dtx_diff include paths (again)

 - a stm32h7 clock binding doc fix

* tag 'devicetree-fixes-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: clk: stm32h7: fix clock-cell size
  scripts/dtc: dtx_diff - 2nd update of include dts paths to match build
  dt-bindings: fix vendor prefix for Abracon
  of: provide inline helper for of_find_device_by_node

Pull x86 fixes from Ingo Molnar:
 "Another round of CR3/PCID related fixes (I think this addresses all
  but one of the known problems with PCID support), an objtool fix plus
  a Clang fix that (finally) solves all Clang quirks to build a bootable
  x86 kernel as-is"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm: Fix inline asm call constraints for Clang
  objtool: Handle another GCC stack pointer adjustment bug
  x86/mm/32: Load a sane CR3 before cpu_init() on secondary CPUs
  x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlier
  x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware code
  x86/mm: Factor out CR3-building code

Pull timer fix from Ingo Molnar:
 "A clocksource driver section mismatch fix"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/integrator: Fix section mismatch warning

Pull irq fixes from Ingo Molnar:
 "Three irqchip driver fixes, and an affinity mask helper function bug
  fix affecting x86"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "genirq: Restrict effective affinity to interrupts actually using it"
  irqchip.mips-gic: Fix shared interrupt mask writes
  irqchip/gic-v4: Fix building with ancient gcc
  irqchip/gic-v3: Iterate over possible CPUs by for_each_possible_cpu()

Pull address-limit checking fixes from Ingo Molnar:
 "This fixes a number of bugs in the address-limit (USER_DS) checks that
  got introduced in the merge window, (mostly) affecting the ARM and
  ARM64 platforms"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arm64/syscalls: Move address limit check in loop
  arm/syscalls: Optimize address limit check
  Revert "arm/syscalls: Check address limit on user-mode return"
  syscalls: Use CHECK_DATA_CORRUPTION for addr_limit_user_check

Pull misc security layer update from James Morris:
 "This is the remaining 'general' change in the security tree for v4.14,
  following the direct merging of SELinux (+ TOMOYO), AppArmor, and
  seccomp.

  That's everything now for the security tree except IMA, which will
  follow shortly (I've been traveling for the past week with patchy
  internet)"

* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: fix description of values returned by cap_inode_need_killpriv

Pull TPM updates from James Morris:
 "Here are the TPM updates from Jarkko for v4.14, which I've placed in
  their own branch (next-tpm). I ended up cherry-picking them as other
  changes had been made in Jarkko's branch after he sent me his original
  pull request.

  I plan on maintaining a separate branch for TPM (and other security
  subsystems) from now on.

  From Jarkko: 'Not much this time except a few fixes'"

* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  tpm: ibmvtpm: simplify crq initialization and document crq format
  tpm: replace msleep() with  usleep_range() in TPM 1.2/2.0 generic drivers
  Documentation: tpm: add powered-while-suspended binding documentation
  tpm: tpm_crb: constify acpi_device_id.
  tpm: vtpm: constify vio_device_id

The crq is passed in registers and is the same on BE and LE hosts.
However, current implementation allocates a structure on-stack to
represent the crq, initializes the members swapping them to BE, and
loads the structure swapping it from BE. This is pointless and causes
GCC warnings about ununitialized members. Get rid of the structure and
the warnings.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

The patch simply replaces all msleep function calls with usleep_range calls
in the generic drivers.

Tested with an Infineon TPM 1.2, using the generic tpm-tis module, for a
thousand PCR extends, we see results going from 1m57s unpatched to 40s
with the new patch. We obtain similar results when using the original and
patched tpm_infineon driver, which is also part of the patch.
Similarly with a STM TPM 2.0, using the CRB driver, it takes about 20ms per
extend unpatched and around 7ms with the new patch.

Note that the PCR consistency is untouched with this patch, each TPM has
been tested with 10 million extends and the aggregated PCR value is
continuously verified to be correct.

As an extension of this work, this could potentially and easily be applied
to other vendor's drivers. Still, these changes are not included in the
proposed patch as they are untested.
Signed-off-by: Hamza Attak <hamza@hpe.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

Add a new powered-while-suspended property to control the behavior of the
TPM suspend/resume.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

acpi_device_id are not supposed to change at runtime. All functions
working with acpi_device_id provided by <acpi/acpi_bus.h> work with
const acpi_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   4198	    608	      0	   4806	   12c6	drivers/char/tpm/tpm_crb.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   4262	    520	      0	   4782	   12ae	drivers/char/tpm/tpm_crb.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

vio_device_id are not supposed to change at runtime. All functions
working with vio_device_id provided by <asm/vio.h> work with
const vio_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

cap_inode_need_killpriv returns 1 if security.capability exists and
has a value and inode_killpriv() is required, 0 otherwise. Fix the
description of the return value to reflect this.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

Pull parisc fixes from Helge Deller:

 - Unbreak parisc bootloader by avoiding a gcc-7 optimization to convert
   multiple byte-accesses into one word-access.

 - Add missing HWPOISON page fault handler code. I completely missed
   that when I added HWPOISON support during this merge window and it
   only showed up now with the madvise07 LTP test case.

 - Fix backtrace unwinding to stop when stack start has been reached.

 - Issue warning if initrd has been loaded into memory regions with
   broken RAM modules.

 - Fix HPMC handler (parisc hardware fault handler) to comply with
   architecture specification.

 - Avoid compiler warnings about too large frame sizes.

 - Minor init-section fixes.

* 'parisc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Unbreak bootloader due to gcc-7 optimizations
  parisc: Reintroduce option to gzip-compress the kernel
  parisc: Add HWPOISON page fault handler code
  parisc: Move init_per_cpu() into init section
  parisc: Check if initrd was loaded into broken RAM
  parisc: Add PDCE_CHECK instruction to HPMC handler
  parisc: Add wrapper for pdc_instr() firmware function
  parisc: Move start_parisc() into init section
  parisc: Stop unwinding at start of stack
  parisc: Fix too large frame size warnings

Pull rdma fixes from Doug Ledford:

 - Smattering of miscellanous fixes

 - A five patch series for i40iw that had a patch (5/5) that was larger
   than I would like, but I took it because it's needed for large scale
   users

 - An 8 patch series for bnxt_re that landed right as I was leaving on
   PTO and so had to wait until now...they are all appropriate fixes for
   -rc IMO

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (22 commits)
  bnxt_re: Don't issue cmd to delete GID for QP1 GID entry before the QP is destroyed
  bnxt_re: Fix memory leak in FRMR path
  bnxt_re: Remove RTNL lock dependency in bnxt_re_query_port
  bnxt_re: Fix race between the netdev register and unregister events
  bnxt_re: Free up devices in module_exit path
  bnxt_re: Fix compare and swap atomic operands
  bnxt_re: Stop issuing further cmds to FW once a cmd times out
  bnxt_re: Fix update of qplib_qp.mtu when modified
  i40iw: Add support for port reuse on active side connections
  i40iw: Add missing VLAN priority
  i40iw: Call i40iw_cm_disconn on modify QP to disconnect
  i40iw: Prevent multiple netdev event notifier registrations
  i40iw: Fail open if there are no available MSI-X vectors
  RDMA/vmw_pvrdma: Fix reporting correct opcodes for completion
  IB/bnxt_re: Fix frame stack compilation warning
  IB/mlx5: fix debugfs cleanup
  IB/ocrdma: fix incorrect fall-through on switch statement
  IB/ipoib: Suppress the retry related completion errors
  iw_cxgb4: remove the stid on listen create failure
  iw_cxgb4: drop listen destroy replies if no ep found
  ...

Pull networking fixes from David Miller:

 1) Fix NAPI poll list corruption in enic driver, from Christian
    Lamparter.

 2) Fix route use after free, from Eric Dumazet.

 3) Fix regression in reuseaddr handling, from Josef Bacik.

 4) Assert the size of control messages in compat handling since we copy
    it in from userspace twice. From Meng Xu.

 5) SMC layer bug fixes (missing RCU locking, bad refcounting, etc.)
    from Ursula Braun.

 6) Fix races in AF_PACKET fanout handling, from Willem de Bruijn.

 7) Don't use ARRAY_SIZE on spinlock array which might have zero
    entries, from Geert Uytterhoeven.

 8) Fix miscomputation of checksum in ipv6 udp code, from Subash Abhinov
    Kasiviswanathan.

 9) Push the ipv6 header properly in ipv6 GRE tunnel driver, from Xin
    Long.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
  inet: fix improper empty comparison
  net: use inet6_rcv_saddr to compare sockets
  net: set tb->fast_sk_family
  net: orphan frags on stand-alone ptype in dev_queue_xmit_nit
  MAINTAINERS: update git tree locations for ieee802154 subsystem
  net: prevent dst uses after free
  net: phy: Fix truncation of large IRQ numbers in phy_attached_print()
  net/smc: no close wait in case of process shut down
  net/smc: introduce a delay
  net/smc: terminate link group if out-of-sync is received
  net/smc: longer delay for client link group removal
  net/smc: adapt send request completion notification
  net/smc: adjust net_device refcount
  net/smc: take RCU read lock for routing cache lookup
  net/smc: add receive timeout check
  net/smc: add missing dev_put
  net: stmmac: Cocci spatch "of_table"
  lan78xx: Use default values loaded from EEPROM/OTP after reset
  lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE
  lan78xx: Fix for eeprom read/write when device auto suspend
  ...

Merge tag 'apparmor-pr-2017-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor updates from John Johansen:
 "This is the apparmor pull request, similar to SELinux and seccomp.

  It's the same series that I was sent to James' security tree + one
  regression fix that was found after the series was sent to James and
  would have been sent for v4.14-rc2.

  Features:
  - in preparation for secid mapping add support for absolute root view
    based labels
  - add base infastructure for socket mediation
  - add mount mediation
  - add signal mediation

  minor cleanups and changes:
  - be defensive, ensure unconfined profiles have dfas initialized
  - add more debug asserts to apparmorfs
  - enable policy unpacking to audit different reasons for failure
  - cleanup conditional check for label in label_print
  - Redundant condition: prev_ns. in [label.c:1498]

  Bug Fixes:
  - fix regression in apparmorfs DAC access permissions
  - fix build failure on sparc caused by undeclared signals
  - fix sparse report of incorrect type assignment when freeing label proxies
  - fix race condition in null profile creation
  - Fix an error code in aafs_create()
  - Fix logical error in verify_header()
  - Fix shadowed local variable in unpack_trans_table()"

* tag 'apparmor-pr-2017-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: fix apparmorfs DAC access permissions
  apparmor: fix build failure on sparc caused by undeclared signals
  apparmor: fix incorrect type assignment when freeing proxies
  apparmor: ensure unconfined profiles have dfas initialized
  apparmor: fix race condition in null profile creation
  apparmor: move new_null_profile to after profile lookup fns()
  apparmor: add base infastructure for socket mediation
  apparmor: add more debug asserts to apparmorfs
  apparmor: make policy_unpack able to audit different info messages
  apparmor: add support for absolute root view based labels
  apparmor: cleanup conditional check for label in label_print
  apparmor: add mount mediation
  apparmor: add the ability to mediate signals
  apparmor: Redundant condition: prev_ns. in [label.c:1498]
  apparmor: Fix an error code in aafs_create()
  apparmor: Fix logical error in verify_header()
  apparmor: Fix shadowed local variable in unpack_trans_table()

For inline asm statements which have a CALL instruction, we list the
stack pointer as a constraint to convince GCC to ensure the frame
pointer is set up first:

  static inline void foo()
  {
	register void *__sp asm(_ASM_SP);
	asm("call bar" : "+r" (__sp))
  }

Unfortunately, that pattern causes Clang to corrupt the stack pointer.

The fix is easy: convert the stack pointer register variable to a global
variable.

It should be noted that the end result is different based on the GCC
version.  With GCC 6.4, this patch has exactly the same result as
before:

	defconfig	defconfig-nofp	distro		distro-nofp
 before	9820389		9491555		8816046		8516940
 after	9820389		9491555		8816046		8516940

With GCC 7.2, however, GCC's behavior has changed.  It now changes its
behavior based on the conversion of the register variable to a global.
That somehow convinces it to *always* set up the frame pointer before
inserting *any* inline asm.  (Therefore, listing the variable as an
output constraint is a no-op and is no longer necessary.)  It's a bit
overkill, but the performance impact should be negligible.  And in fact,
there's a nice improvement with frame pointers disabled:

	defconfig	defconfig-nofp	distro		distro-nofp
 before	9796316		9468236		9076191		8790305
 after	9796957		9464267		9076381		8785949

So in summary, while listing the stack pointer as an output constraint
is no longer necessary for newer versions of GCC, it's still needed for
older versions.
Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/3db862e970c432ae823cf515c52b54fec8270e0e.1505942196.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

The kbuild bot reported the following warning with GCC 4.4 and a
randconfig:

  net/socket.o: warning: objtool: compat_sock_ioctl()+0x1083: stack state mismatch: cfa1=7+160 cfa2=-1+0

This is caused by another GCC non-optimization, where it backs up and
restores the stack pointer for no apparent reason:

    2f91:       48 89 e0                mov    %rsp,%rax
    2f94:       4c 89 e7                mov    %r12,%rdi
    2f97:       4c 89 f6                mov    %r14,%rsi
    2f9a:       ba 20 00 00 00          mov    $0x20,%edx
    2f9f:       48 89 c4                mov    %rax,%rsp

This issue would have been happily ignored before the following commit:

  dd88a0a0 ("objtool: Handle GCC stack pointer adjustment bug")

But now that objtool is paying attention to such stack pointer writes
to/from a register, it needs to understand them properly.  In this case
that means recognizing that the "mov %rsp, %rax" instruction is
potentially a backup of the stack pointer.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: dd88a0a0 ("objtool: Handle GCC stack pointer adjustment bug")
Link: http://lkml.kernel.org/r/8c7aa8e9a36fbbb6655d9d8e7cea58958c912da8.1505942196.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull ACPI fixes from Rafael Wysocki:
 "These fix the initialization of resources in the ACPI WDAT watchdog
  driver, a recent regression in the ACPI device properties handling, a
  recent change in behavior causing the ACPI_HANDLE() macro to only work
  for GPL code and create a MAINTAINERS entry for ACPI PMIC drivers in
  order to specify the official reviewers for that code.

  Specifics:

   - Fix the initialization of resources in the ACPI WDAT watchdog
     driver that uses unititialized memory which causes compiler
     warnings to be triggered (Arnd Bergmann).

   - Fix a recent regression in the ACPI device properties handling that
     causes some device properties data to be skipped during enumeration
     (Sakari Ailus).

   - Fix a recent change in behavior that caused the ACPI_HANDLE() macro
     to stop working for non-GPL code which is a problem for the NVidia
     binary graphics driver, for example (John Hubbard).

   - Add a MAINTAINERS entry for the ACPI PMIC drivers to specify the
     official reviewers for that code (Rafael Wysocki)"

* tag 'acpi-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: properties: Return _DSD hierarchical extension (data) sub-nodes correctly
  ACPI / bus: Make ACPI_HANDLE() work for non-GPL code again
  ACPI / watchdog: properly initialize resources
  ACPI / PMIC: Add code reviewers to MAINTAINERS

Josef Bacik says:

====================
net: fix reuseaddr regression

I introduced a regression when reworking the fastreuse port stuff that allows
bind conflicts to occur once a reuseaddr successfully opens on an existing tb.
The root cause is I reversed an if statement which caused us to set the tb as if
there were no owners on the socket if there were, which obviously is not
correct.

Dave could you please queue these changes up for -stable, I've run them through
the net tests and added another test to check for this problem specifically.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When doing my reuseport rework I screwed up and changed a

if (hlist_empty(&tb->owners))

to

if (!hlist_empty(&tb->owners))

This is obviously bad as all of the reuseport/reuse logic was reversed,
which caused weird problems like allowing an ipv4 bind conflict if we
opened an ipv4 only socket on a port followed by an ipv6 only socket on
the same port.

Fixes: b9470c27 ("inet: kill smallest_size and smallest_port")
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In ipv6_rcv_saddr_equal() we need to use inet6_rcv_saddr(sk) for the
ipv6 compare with the fast socket information to make sure we're doing
the proper comparisons.

Fixes: 637bc8bb ("inet: reset tb->fastreuseport when adding a reuseport sk")
Reported-and-tested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to set the tb->fast_sk_family properly so we can use the proper
comparison function for all subsequent reuseport bind requests.

Fixes: 637bc8bb ("inet: reset tb->fastreuseport when adding a reuseport sk")
Reported-and-tested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Zerocopy skbs frags are copied when the skb is looped to a local sock.
Commit 1080e512 ("net: orphan frags on receive") introduced calls
to skb_orphan_frags to deliver_skb and __netif_receive_skb for this.

With msg_zerocopy, these skbs can also exist in the tx path and thus
loop from dev_queue_xmit_nit. This already calls deliver_skb in its
loop. But it does not orphan before a separate pt_prev->func().

Add the missing skb_orphan_frags_rx.

Changes
  v1->v2: handle skb_orphan_frags_rx failure

Fixes: 1f8b977a ("sock: enable MSG_ZEROCOPY")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull power management fixes from Rafael Wysocki:
 "These fix a cpufreq regression introduced by recent changes related to
  the generic DT driver, an initialization time memory leak in cpuidle
  on ARM, a PM core bug that may cause system suspend/resume to fail on
  some systems, a request type validation issue in the PM QoS framework
  and two documentation-related issues.

  Specifics:

   - Fix a regression in cpufreq on systems using DT as the source of
     CPU configuration information where two different code paths
     attempt to create the cpufreq-dt device object (there can be only
     one) and fix up the "compatible" matching for some TI platforms on
     top of that (Viresh Kumar, Dave Gerlach).

   - Fix an initialization time memory leak in cpuidle on ARM which
     occurs if the cpuidle driver initialization fails (Stefan Wahren).

   - Fix a PM core function that checks whether or not there are any
     system suspend/resume callbacks for a device, but forgets to check
     legacy callbacks which then may be skipped incorrectly and the
     system may crash and/or the device may become unusable after a
     suspend-resume cycle (Rafael Wysocki).

   - Fix request type validation for latency tolerance PM QoS requests
     which may lead to unexpected behavior (Jan Schönherr).

   - Fix a broken link to PM documentation from a header file and a typo
     in a PM document (Geert Uytterhoeven, Rafael Wysocki)"

* tag 'pm-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: ti-cpufreq: Support additional am43xx platforms
  ARM: cpuidle: Avoid memleak if init fail
  cpufreq: dt-platdev: Add some missing platforms to the blacklist
  PM: core: Fix device_pm_check_callbacks()
  PM: docs: Drop an excess character from devices.rst
  PM / QoS: Use the correct variable to check the QoS request type
  driver core: Fix link to device power management documentation

Pull input fixes from Dmitry Torokhov:

 - fixes for two long standing issues (lock up and a crash) in force
   feedback handling in uinput driver

 - tweak to firmware update timing in Elan I2C touchpad driver.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - extend Flash-Write delay
  Input: uinput - avoid crash when sending FF request to device going away
  Input: uinput - avoid FF flush when destroying device