- 24 Apr, 2018 1 commit
-
-
Mauro Carvalho Chehab authored
commit 85ea29f1 upstream. At put_v4l2_window32(), it tries to access kp->clips. However, kp points to an userspace pointer. So, it should be obtained via get_user(), otherwise it can OOPS: vivid-000: ================== END STATUS ================== BUG: unable to handle kernel paging request at 00000000fffb18e0 IP: [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] PGD 3f5776067 PUD 3f576f067 PMD 3f5769067 PTE 800000042548f067 Oops: 0001 [#1] SMP Modules linked in: vivid videobuf2_vmalloc videobuf2_memops v4l2_dv_timings videobuf2_core v4l2_common videodev media xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill binfmt_misc snd_hda_codec_hdmi i915 snd_hda_intel snd_hda_controller snd_hda_codec intel_rapl x86_pkg_temp_thermal snd_hwdep intel_powerclamp snd_pcm coretemp snd_seq_midi kvm_intel kvm snd_seq_midi_event snd_rawmidi i2c_algo_bit drm_kms_helper snd_seq drm crct10dif_pclmul e1000e snd_seq_device crc32_pclmul snd_timer ghash_clmulni_intel snd mei_me mei ptp pps_core soundcore lpc_ich video crc32c_intel [last unloaded: media] CPU: 2 PID: 28332 Comm: v4l2-compliance Not tainted 3.18.102+ #107 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 task: ffff8804293f8000 ti: ffff8803f5640000 task.ti: ffff8803f5640000 RIP: 0010:[<ffffffffc05468d9>] [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] RSP: 0018:ffff8803f5643e28 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000fffb1ab4 RDX: 00000000fffb1a68 RSI: 00000000fffb18d8 RDI: 00000000fffb1aa8 RBP: ffff8803f5643e48 R08: 0000000000000001 R09: ffff8803f54b0378 R10: 0000000000000000 R11: 0000000000000168 R12: 00000000fffb18c0 R13: 00000000fffb1a94 R14: 00000000fffb18c8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880456d00000(0063) knlGS:00000000f7100980 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000fffb18e0 CR3: 00000003f552b000 CR4: 00000000003407e0 Stack: 00000000fffb1a94 00000000c0cc5640 0000000000000056 ffff8804274f3600 ffff8803f5643ed0 ffffffffc0547e16 0000000000000003 ffff8803f5643eb0 ffffffff81301460 ffff88009db44b01 ffff880441942520 ffff8800c0d05640 Call Trace: [<ffffffffc0547e16>] v4l2_compat_ioctl32+0x12d6/0x1b1d [videodev] [<ffffffff81301460>] ? file_has_perm+0x70/0xc0 [<ffffffff81252a2c>] compat_SyS_ioctl+0xec/0x1200 [<ffffffff8173241a>] sysenter_dispatch+0x7/0x21 Code: 00 00 48 8b 80 48 c0 ff ff 48 83 e8 38 49 39 c6 0f 87 2b ff ff ff 49 8d 45 1c e8 a3 ce e3 c0 85 c0 0f 85 1a ff ff ff 41 8d 40 ff <4d> 8b 64 24 20 41 89 d5 48 8d 44 40 03 4d 8d 34 c4 eb 15 0f 1f RIP [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] RSP <ffff8803f5643e28> CR2: 00000000fffb18e0 Tested with vivid driver on Kernel v3.18.102. Same bug happens upstream too: BUG: KASAN: user-memory-access in __put_v4l2_format32+0x98/0x4d0 [videodev] Read of size 8 at addr 00000000ffe48400 by task v4l2-compliance/8713 CPU: 0 PID: 8713 Comm: v4l2-compliance Not tainted 4.16.0-rc4+ #108 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 Call Trace: dump_stack+0x5c/0x7c kasan_report+0x164/0x380 ? __put_v4l2_format32+0x98/0x4d0 [videodev] __put_v4l2_format32+0x98/0x4d0 [videodev] v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev] ? __fsnotify_inode_delete+0x20/0x20 ? __put_v4l2_format32+0x4d0/0x4d0 [videodev] compat_SyS_ioctl+0x646/0x14d0 ? do_ioctl+0x30/0x30 do_fast_syscall_32+0x191/0x3f4 entry_SYSENTER_compat+0x6b/0x7a ================================================================== Disabling lock debugging due to kernel taint BUG: unable to handle kernel paging request at 00000000ffe48400 IP: __put_v4l2_format32+0x98/0x4d0 [videodev] PGD 3a22fb067 P4D 3a22fb067 PUD 39b6f0067 PMD 39b6f1067 PTE 80000003256af067 Oops: 0001 [#1] SMP KASAN Modules linked in: vivid videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops v4l2_tpg v4l2_dv_timings videobuf2_v4l2 videobuf2_common v4l2_common videodev xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill ecdh_generic binfmt_misc snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp i915 coretemp snd_hda_intel snd_hda_codec kvm_intel snd_hwdep snd_hda_core kvm snd_pcm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_midi ghash_clmulni_intel snd_seq_midi_event i2c_algo_bit intel_cstate snd_rawmidi intel_uncore snd_seq drm_kms_helper e1000e snd_seq_device snd_timer intel_rapl_perf drm ptp snd mei_me mei lpc_ich pps_core soundcore video crc32c_intel CPU: 0 PID: 8713 Comm: v4l2-compliance Tainted: G B 4.16.0-rc4+ #108 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 RIP: 0010:__put_v4l2_format32+0x98/0x4d0 [videodev] RSP: 0018:ffff8803b9be7d30 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8803ac983e80 RCX: ffffffff8cd929f2 RDX: 1ffffffff1d0a149 RSI: 0000000000000297 RDI: 0000000000000297 RBP: 00000000ffe485c0 R08: fffffbfff1cf5123 R09: ffffffff8e7a8948 R10: 0000000000000001 R11: fffffbfff1cf5122 R12: 00000000ffe483e0 R13: 00000000ffe485c4 R14: ffff8803ac985918 R15: 00000000ffe483e8 FS: 0000000000000000(0000) GS:ffff880407400000(0063) knlGS:00000000f7a46980 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000ffe48400 CR3: 00000003a83f2003 CR4: 00000000003606f0 Call Trace: v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev] ? __fsnotify_inode_delete+0x20/0x20 ? __put_v4l2_format32+0x4d0/0x4d0 [videodev] compat_SyS_ioctl+0x646/0x14d0 ? do_ioctl+0x30/0x30 do_fast_syscall_32+0x191/0x3f4 entry_SYSENTER_compat+0x6b/0x7a Code: 4c 89 f7 4d 8d 7c 24 08 e8 e6 a4 69 cb 48 8b 83 98 1a 00 00 48 83 e8 10 49 39 c7 0f 87 9d 01 00 00 49 8d 7c 24 20 e8 c8 a4 69 cb <4d> 8b 74 24 20 4c 89 ef 4c 89 fe ba 10 00 00 00 e8 23 d9 08 cc RIP: __put_v4l2_format32+0x98/0x4d0 [videodev] RSP: ffff8803b9be7d30 CR2: 00000000ffe48400 cc: stable@vger.kernel.org Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Reviewed-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 13 Apr, 2018 39 commits
-
-
Greg Kroah-Hartman authored
-
Greg Hackmann authored
Pixel 2 field testers reported that when they tried to reboot their phones with some USB devices plugged in, the reboot would get wedged and eventually trigger watchdog reset. Once the Pixel kernel team found a reliable repro case, they narrowed it down to this commit's 4.4.y backport. Reverting the change made the issue go away. This reverts commit b07c1251. Signed-off-by:
Greg Hackmann <ghackmann@google.com> Signed-off-by:
-
David Ahern authored
commit 82dd0d2a upstream. Miguel reported an skb use after free / double free in vrf_finish_output when neigh_output returns an error. The vrf driver should return after the call to neigh_output as it takes over the skb on error path as well. Patch is a simplified version of Miguel's patch which was written for 4.9, and updated to top of tree. Fixes: 8f58336d ("net: Add ethernet header for pass through VRF device") Signed-off-by:
Miguel Fadon Perlines <mfadon@teldat.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [ backport to 4.4 and 4.9 dropped the sock_confirm_neigh and changed neigh_output to dst_neigh_output ] Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 10b8a3de ] While building ipv6 datagram we currently allow arbitrary large extheaders, even beyond pmtu size. The syzbot has found a way to exploit the above to trigger the following splat: kernel BUG at ./include/linux/skbuff.h:2073! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 4230 Comm: syzkaller672661 Not tainted 4.16.0-rc2+ #326 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__skb_pull include/linux/skbuff.h:2073 [inline] RIP: 0010:__ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636 RSP: 0018:ffff8801bc18f0f0 EFLAGS: 00010293 RAX: ffff8801b17400c0 RBX: 0000000000000738 RCX: ffffffff84f01828 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8801b415ac18 RBP: ffff8801bc18f360 R08: ffff8801b4576844 R09: 0000000000000000 R10: ffff8801bc18f380 R11: ffffed00367aee4e R12: 00000000000000d6 R13: ffff8801b415a740 R14: dffffc0000000000 R15: ffff8801b45767c0 FS: 0000000001535880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000b000 CR3: 00000001b4123001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip6_finish_skb include/net/ipv6.h:969 [inline] udp_v6_push_pending_frames+0x269/0x3b0 net/ipv6/udp.c:1073 udpv6_sendmsg+0x2a96/0x3400 net/ipv6/udp.c:1343 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:764 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg+0xca/0x110 net/socket.c:640 ___sys_sendmsg+0x320/0x8b0 net/socket.c:2046 __sys_sendmmsg+0x1ee/0x620 net/socket.c:2136 SYSC_sendmmsg net/socket.c:2167 [inline] SyS_sendmmsg+0x35/0x60 net/socket.c:2162 do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x4404c9 RSP: 002b:00007ffdce35f948 EFLAGS: 00000217 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004404c9 RDX: 0000000000000003 RSI: 0000000020001f00 RDI: 0000000000000003 RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 0000000020000080 R11: 0000000000000217 R12: 0000000000401df0 R13: 0000000000401e80 R14: 0000000000000000 R15: 0000000000000000 Code: ff e8 1d 5e b9 fc e9 15 e9 ff ff e8 13 5e b9 fc e9 44 e8 ff ff e8 29 5e b9 fc e9 c0 e6 ff ff e8 3f f3 80 fc 0f 0b e8 38 f3 80 fc <0f> 0b 49 8d 87 80 00 00 00 4d 8d 87 84 00 00 00 48 89 85 20 fe RIP: __skb_pull include/linux/skbuff.h:2073 [inline] RSP: ffff8801bc18f0f0 RIP: __ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636 RSP: ffff8801bc18f0f0 As stated by RFC 7112 section 5: When a host fragments an IPv6 datagram, it MUST include the entire IPv6 Header Chain in the First Fragment. So this patch addresses the issue dropping datagrams with excessive extheader length. It also updates the error path to report to the calling socket nonnegative pmtu values. The issue apparently predates git history. v1 -> v2: cleanup error path, as per Eric's suggestion Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+91e6f9932ff122fa4410@syzkaller.appspotmail.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jeff Barnhill authored
[ Upstream commit 71a1c915 ] At the end of ip6_forward(), IPSTATS_MIB_OUTFORWDATAGRAMS and IPSTATS_MIB_OUTOCTETS are incremented immediately before the NF_HOOK call for NFPROTO_IPV6 / NF_INET_FORWARD. As a result, these counters get incremented regardless of whether or not the netfilter hook allows the packet to continue being processed. This change increments the counters in ip6_forward_finish() so that it will not happen if the netfilter hook chooses to terminate the packet, which is similar to how IPv4 works. Signed-off-by:
Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by:
-
Craig Dillabaugh authored
[ Upstream commit 734549eb ] Fixes a bug in the tcf_dump_walker function that can cause some actions to not be reported when dumping a large number of actions. This issue became more aggrevated when cookies feature was added. In particular this issue is manifest when large cookie values are assigned to the actions and when enough actions are created that the resulting table must be dumped in multiple batches. The number of actions returned in each batch is limited by the total number of actions and the memory buffer size. With small cookies the numeric limit is reached before the buffer size limit, which avoids the code path triggering this bug. When large cookies are used buffer fills before the numeric limit, and the erroneous code path is hit. For example after creating 32 csum actions with the cookie aaaabbbbccccdddd $ tc actions ls action csum total acts 26 action order 0: csum (tcp) action continue index 1 ref 1 bind 0 cookie aaaabbbbccccdddd ..... action order 25: csum (tcp) action continue index 26 ref 1 bind 0 cookie aaaabbbbccccdddd total acts 6 action order 0: csum (tcp) action continue index 28 ref 1 bind 0 cookie aaaabbbbccccdddd ...... action order 5: csum (tcp) action continue index 32 ref 1 bind 0 cookie aaaabbbbccccdddd Note that the action with index 27 is omitted from the report. Fixes: 4b3550ef ("[NET_SCHED]: Use nla_nest_start/nla_nest_end")" Signed-off-by:
Craig Dillabaugh <cdillaba@mojatatu.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 19c9ea36 ] pci_set_drvdata() is called only after registering the net_device, therefore we could run into a NPE if one of the functions using driver_data is called before it's set. Fix this by calling pci_set_drvdata() before registering the net_device. This fix is a candidate for stable. As far as I can see the bug has been there in kernel version 3.2 already, therefore I can't provide a reference which commit is fixed by it. The fix may need small adjustments per kernel version because due to other changes the label which is jumped to if register_netdev() fails has changed over time. Reported-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 537b361f ] Use valid_name() to make sure user does not provide illegal device name. Fixes: ed1efb2a ("ipv6: Add support for IPsec virtual tunnel interfaces") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit db7a65e3 ] Use valid_name() to make sure user does not provide illegal device name. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 5f42df01 ] Use dev_valid_name() to make sure user does not provide illegal device name. syzbot caught the following bug : BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline] BUG: KASAN: stack-out-of-bounds in ip6gre_tunnel_locate+0x334/0x860 net/ipv6/ip6_gre.c:339 Write of size 20 at addr ffff8801afb9f7b8 by task syzkaller851048/4466 CPU: 1 PID: 4466 Comm: syzkaller851048 Not tainted 4.16.0+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x1b9/0x29f lib/dump_stack.c:53 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 strlcpy include/linux/string.h:300 [inline] ip6gre_tunnel_locate+0x334/0x860 net/ipv6/ip6_gre.c:339 ip6gre_tunnel_ioctl+0x69d/0x12e0 net/ipv6/ip6_gre.c:1195 dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334 dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525 sock_ioctl+0x47e/0x680 net/socket.c:1015 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 SYSC_ioctl fs/ioctl.c:708 [inline] SyS_ioctl+0x24/0x30 fs/ioctl.c:706 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit b95211e0 ] Use dev_valid_name() to make sure user does not provide illegal device name. syzbot caught the following bug : BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline] BUG: KASAN: stack-out-of-bounds in ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254 Write of size 33 at addr ffff8801b64076d8 by task syzkaller932654/4453 CPU: 0 PID: 4453 Comm: syzkaller932654 Not tainted 4.16.0+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x1b9/0x29f lib/dump_stack.c:53 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 strlcpy include/linux/string.h:300 [inline] ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254 ipip6_tunnel_ioctl+0xe71/0x241b net/ipv6/sit.c:1221 dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334 dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525 sock_ioctl+0x47e/0x680 net/socket.c:1015 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 SYSC_ioctl fs/ioctl.c:708 [inline] SyS_ioctl+0x24/0x30 fs/ioctl.c:706 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9cb726a2 ] Use dev_valid_name() to make sure user does not provide illegal device name. syzbot caught the following bug : BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline] BUG: KASAN: stack-out-of-bounds in __ip_tunnel_create+0xca/0x6b0 net/ipv4/ip_tunnel.c:257 Write of size 20 at addr ffff8801ac79f810 by task syzkaller268107/4482 CPU: 0 PID: 4482 Comm: syzkaller268107 Not tainted 4.16.0+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x1b9/0x29f lib/dump_stack.c:53 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 strlcpy include/linux/string.h:300 [inline] __ip_tunnel_create+0xca/0x6b0 net/ipv4/ip_tunnel.c:257 ip_tunnel_create net/ipv4/ip_tunnel.c:352 [inline] ip_tunnel_ioctl+0x818/0xd40 net/ipv4/ip_tunnel.c:861 ipip_tunnel_ioctl+0x1c5/0x420 net/ipv4/ipip.c:350 dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334 dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525 sock_ioctl+0x47e/0x680 net/socket.c:1015 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 SYSC_ioctl fs/ioctl.c:708 [inline] SyS_ioctl+0x24/0x30 fs/ioctl.c:706 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: c5441932 ("GRE: Refactor GRE tunneling code.") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit a9d48205 ] We want to use dev_valid_name() to validate tunnel names, so better use strnlen(name, IFNAMSIZ) than strlen(name) to make sure to not upset KASAN. Signed-off-by:
-
Xin Long authored
[ Upstream commit 9f5a90c1 ] When dev_set_promiscuity(1) succeeds but dev_set_allmulti(1) fails, dev_set_promiscuity(-1) should be done before going to the err path. Otherwise, dev->promiscuity will leak. Fixes: 7e1a1ac1 ("bonding: Check return of dev_set_promiscuity/allmulti") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Xin Long authored
[ Upstream commit ae42cc62 ] Beniamino found a crash when adding vlan as slave of bond which is also the parent link: ip link add bond1 type bond ip link set bond1 up ip link add link bond1 vlan1 type vlan id 80 ip link set vlan1 master bond1 The call trace is as below: [<ffffffffa850842a>] queued_spin_lock_slowpath+0xb/0xf [<ffffffffa8515680>] _raw_spin_lock+0x20/0x30 [<ffffffffa83f6f07>] dev_mc_sync+0x37/0x80 [<ffffffffc08687dc>] vlan_dev_set_rx_mode+0x1c/0x30 [8021q] [<ffffffffa83efd2a>] __dev_set_rx_mode+0x5a/0xa0 [<ffffffffa83f7138>] dev_mc_sync_multiple+0x78/0x80 [<ffffffffc084127c>] bond_enslave+0x67c/0x1190 [bonding] [<ffffffffa8401909>] do_setlink+0x9c9/0xe50 [<ffffffffa8403bf2>] rtnl_newlink+0x522/0x880 [<ffffffffa8403ff7>] rtnetlink_rcv_msg+0xa7/0x260 [<ffffffffa8424ecb>] netlink_rcv_skb+0xab/0xc0 [<ffffffffa83fe498>] rtnetlink_rcv+0x28/0x30 [<ffffffffa8424850>] netlink_unicast+0x170/0x210 [<ffffffffa8424bf8>] netlink_sendmsg+0x308/0x420 [<ffffffffa83cc396>] sock_sendmsg+0xb6/0xf0 This is actually a dead lock caused by sync slave hwaddr from master when the master is the slave's 'slave'. This dead loop check is actually done by netdev_master_upper_dev_link. However, Commit 1f718f0f ("bonding: populate neighbour's private on enslave") moved it after dev_mc_sync. This patch is to fix it by moving dev_mc_sync after master_upper_dev_link, so that this loop check would be earlier than dev_mc_sync. It also moves if (mode == BOND_MODE_8023AD) into if (!bond_uses_primary) clause as an improvement. Note team driver also has this issue, I will fix it in another patch. Fixes: 1f718f0f ("bonding: populate neighbour's private on enslave") Reported-by:
Beniamino Galvani <bgalvani@redhat.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 5c78f6bf ] vlan_vids_add_by_dev is called right after dev hwaddr sync, so on the err path it should unsync dev hwaddr. Otherwise, the slave dev's hwaddr will never be unsync when this err happens. Fixes: 1ff412ad ("bonding: change the bond's vlan syncing functions with the standard ones") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
-
Hangbin Liu authored
[ Upstream commit ec1d8ccb ] Just like function ethtool_get_ts_info(), we should also consider the phy_driver ts_info call back. For example, driver dp83640. Fixes: 37dd9255 ("vlan: Pass ethtool get_ts_info queries to real device.") Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit dc6455a7 ] We tried to remove vq poll from wait queue, but do not check whether or not it was in a list before. This will lead double free. Fixing this by switching to use vhost_poll_stop() which zeros poll->wqh after removing poll from waitqueue to make sure it won't be freed twice. Cc: Darren Kenny <darren.kenny@oracle.com> Reported-by: syzbot+c0272972b01b872e604a@syzkaller.appspotmail.com Fixes: 2b8b328b ("vhost_net: handle polling errors when setting backend") Signed-off-by:
Jason Wang <jasowang@redhat.com> Reviewed-by:
Darren Kenny <darren.kenny@oracle.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit afb13363 ] The sky2 ethernet stops working after system resume from suspend: [ 582.852065] sky2 0000:04:00.0: Refused to change power state, currently in D3 The current 150ms delay is not enough, change it to 200ms can solve the issue. BugLink: https://bugs.launchpad.net/bugs/1758507 Cc: Stable <stable@vger.kernel.org> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 81e98370 ] Check must happen before call to ipv6_addr_v4mapped() syzbot report was : BUG: KMSAN: uninit-value in sctp_sockaddr_af net/sctp/socket.c:359 [inline] BUG: KMSAN: uninit-value in sctp_do_bind+0x60f/0xdc0 net/sctp/socket.c:384 CPU: 0 PID: 3576 Comm: syzkaller968804 Not tainted 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 sctp_sockaddr_af net/sctp/socket.c:359 [inline] sctp_do_bind+0x60f/0xdc0 net/sctp/socket.c:384 sctp_bind+0x149/0x190 net/sctp/socket.c:332 inet6_bind+0x1fd/0x1820 net/ipv6/af_inet6.c:293 SYSC_bind+0x3f2/0x4b0 net/socket.c:1474 SyS_bind+0x54/0x80 net/socket.c:1460 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x43fd49 RSP: 002b:00007ffe99df3d28 EFLAGS: 00000213 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fd49 RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000213 R12: 0000000000401670 R13: 0000000000401700 R14: 0000000000000000 R15: 0000000000000000 Local variable description: ----address@SYSC_bind Variable was created at: SYSC_bind+0x6f/0x4b0 net/socket.c:1461 SyS_bind+0x54/0x80 net/socket.c:1460 Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 6780db24 ] syzbot produced a nice report [1] Issue here is that a recvmmsg() managed to leak 8 bytes of kernel memory to user space, because sin_zero (padding field) was not properly cleared. [1] BUG: KMSAN: uninit-value in copy_to_user include/linux/uaccess.h:184 [inline] BUG: KMSAN: uninit-value in move_addr_to_user+0x32e/0x530 net/socket.c:227 CPU: 1 PID: 3586 Comm: syzkaller481044 Not tainted 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 kmsan_internal_check_memory+0x164/0x1d0 mm/kmsan/kmsan.c:1176 kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199 copy_to_user include/linux/uaccess.h:184 [inline] move_addr_to_user+0x32e/0x530 net/socket.c:227 ___sys_recvmsg+0x4e2/0x810 net/socket.c:2211 __sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313 SYSC_recvmmsg+0x29b/0x3e0 net/socket.c:2394 SyS_recvmmsg+0x76/0xa0 net/socket.c:2378 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x4401c9 RSP: 002b:00007ffc56f73098 EFLAGS: 00000217 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401c9 RDX: 0000000000000001 RSI: 0000000020003ac0 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000020003bc0 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000401af0 R13: 0000000000401b80 R14: 0000000000000000 R15: 0000000000000000 Local variable description: ----addr@___sys_recvmsg Variable was created at: ___sys_recvmsg+0xd5/0x810 net/socket.c:2172 __sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313 Bytes 8-15 of 16 are uninitialized ================================================================== Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 3586 Comm: syzkaller481044 Tainted: G B 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 panic+0x39d/0x940 kernel/panic.c:183 kmsan_report+0x238/0x240 mm/kmsan/kmsan.c:1083 kmsan_internal_check_memory+0x164/0x1d0 mm/kmsan/kmsan.c:1176 kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199 copy_to_user include/linux/uaccess.h:184 [inline] move_addr_to_user+0x32e/0x530 net/socket.c:227 ___sys_recvmsg+0x4e2/0x810 net/socket.c:2211 __sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313 SYSC_recvmmsg+0x29b/0x3e0 net/socket.c:2394 SyS_recvmmsg+0x76/0xa0 net/socket.c:2378 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit bfacfb45 ] Once dst has been cached in socket via sk_setup_caps(), it is illegal to call ip_rt_put() (or dst_release()), since sk_setup_caps() did not change dst refcount. We can still dereference it since we hold socket lock. Caugth by syzbot : BUG: KASAN: use-after-free in atomic_dec_return include/asm-generic/atomic-instrumented.h:198 [inline] BUG: KASAN: use-after-free in dst_release+0x27/0xa0 net/core/dst.c:185 Write of size 4 at addr ffff8801c54dc040 by task syz-executor4/20088 CPU: 1 PID: 20088 Comm: syz-executor4 Not tainted 4.16.0+ #376 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x1a7/0x27d lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x23c/0x360 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x137/0x190 mm/kasan/kasan.c:267 kasan_check_write+0x14/0x20 mm/kasan/kasan.c:278 atomic_dec_return include/asm-generic/atomic-instrumented.h:198 [inline] dst_release+0x27/0xa0 net/core/dst.c:185 sk_dst_set include/net/sock.h:1812 [inline] sk_dst_reset include/net/sock.h:1824 [inline] sock_setbindtodevice net/core/sock.c:610 [inline] sock_setsockopt+0x431/0x1b20 net/core/sock.c:707 SYSC_setsockopt net/socket.c:1845 [inline] SyS_setsockopt+0x2ff/0x360 net/socket.c:1828 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x4552d9 RSP: 002b:00007f4878126c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00007f48781276d4 RCX: 00000000004552d9 RDX: 0000000000000019 RSI: 0000000000000001 RDI: 0000000000000013 RBP: 000000000072bea0 R08: 0000000000000010 R09: 0000000000000000 R10: 00000000200010c0 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000526 R14: 00000000006fac30 R15: 0000000000000000 Allocated by task 20088: save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:552 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3542 dst_alloc+0x11f/0x1a0 net/core/dst.c:104 rt_dst_alloc+0xe9/0x540 net/ipv4/route.c:1520 __mkroute_output net/ipv4/route.c:2265 [inline] ip_route_output_key_hash_rcu+0xa49/0x2c60 net/ipv4/route.c:2493 ip_route_output_key_hash+0x20b/0x370 net/ipv4/route.c:2322 __ip_route_output_key include/net/route.h:126 [inline] ip_route_output_flow+0x26/0xa0 net/ipv4/route.c:2577 ip_route_output_ports include/net/route.h:163 [inline] pptp_connect+0xa84/0x1170 drivers/net/ppp/pptp.c:453 SYSC_connect+0x213/0x4a0 net/socket.c:1639 SyS_connect+0x24/0x30 net/socket.c:1620 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Freed by task 20082: save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:520 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:527 __cache_free mm/slab.c:3486 [inline] kmem_cache_free+0x83/0x2a0 mm/slab.c:3744 dst_destroy+0x266/0x380 net/core/dst.c:140 dst_destroy_rcu+0x16/0x20 net/core/dst.c:153 __rcu_reclaim kernel/rcu/rcu.h:178 [inline] rcu_do_batch kernel/rcu/tree.c:2675 [inline] invoke_rcu_callbacks kernel/rcu/tree.c:2930 [inline] __rcu_process_callbacks kernel/rcu/tree.c:2897 [inline] rcu_process_callbacks+0xd6c/0x17b0 kernel/rcu/tree.c:2914 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285 The buggy address belongs to the object at ffff8801c54dc000 which belongs to the cache ip_dst_cache of size 168 The buggy address is located 64 bytes inside of 168-byte region [ffff8801c54dc000, ffff8801c54dc0a8) The buggy address belongs to the page: page:ffffea0007153700 count:1 mapcount:0 mapping:ffff8801c54dc000 index:0x0 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffff8801c54dc000 0000000000000000 0000000100000010 raw: ffffea0006b34b20 ffffea0006b6c1e0 ffff8801d674a1c0 0000000000000000 page dumped because: kasan: bad access detected Signed-off-by:
-
Davide Caratti authored
[ Upstream commit 3239534a ] when tcf_bpf_init_from_ops() fails (e.g. because of program having invalid number of instructions), tcf_bpf_cfg_cleanup() calls bpf_prog_put(NULL) or bpf_prog_destroy(NULL). Unless CONFIG_BPF_SYSCALL is unset, this causes the following error: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 PGD 800000007345a067 P4D 800000007345a067 PUD 340e1067 PMD 0 Oops: 0000 [#1] SMP PTI Modules linked in: act_bpf(E) ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic pcbc snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd glue_helper cryptd joydev snd_timer snd virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_blk drm virtio_net virtio_console i2c_core crc32c_intel serio_raw virtio_pci ata_piix libata virtio_ring floppy virtio dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_bpf] CPU: 3 PID: 5654 Comm: tc Tainted: G E 4.16.0.bpf_test+ #408 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__bpf_prog_put+0xc/0xc0 RSP: 0018:ffff9594003ef728 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff9594003ef758 RCX: 0000000000000024 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 R10: 0000000000000220 R11: ffff8a7ab9f17131 R12: 0000000000000000 R13: ffff8a7ab7c3c8e0 R14: 0000000000000001 R15: ffff8a7ab88f1054 FS: 00007fcb2f17c740(0000) GS:ffff8a7abfd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 000000007c888006 CR4: 00000000001606e0 Call Trace: tcf_bpf_cfg_cleanup+0x2f/0x40 [act_bpf] tcf_bpf_cleanup+0x4c/0x70 [act_bpf] __tcf_idr_release+0x79/0x140 tcf_bpf_init+0x125/0x330 [act_bpf] tcf_action_init_1+0x2cc/0x430 ? get_page_from_freelist+0x3f0/0x11b0 tcf_action_init+0xd3/0x1b0 tc_ctl_action+0x18b/0x240 rtnetlink_rcv_msg+0x29c/0x310 ? _cond_resched+0x15/0x30 ? __kmalloc_node_track_caller+0x1b9/0x270 ? rtnl_calcit.isra.29+0x100/0x100 netlink_rcv_skb+0xd2/0x110 netlink_unicast+0x17c/0x230 netlink_sendmsg+0x2cd/0x3c0 sock_sendmsg+0x30/0x40 ___sys_sendmsg+0x27a/0x290 ? mem_cgroup_commit_charge+0x80/0x130 ? page_add_new_anon_rmap+0x73/0xc0 ? do_anonymous_page+0x2a2/0x560 ? __handle_mm_fault+0xc75/0xe20 __sys_sendmsg+0x58/0xa0 do_syscall_64+0x6e/0x1a0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7fcb2e58eba0 RSP: 002b:00007ffc93c496c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffc93c497f0 RCX: 00007fcb2e58eba0 RDX: 0000000000000000 RSI: 00007ffc93c49740 RDI: 0000000000000003 RBP: 000000005ac6a646 R08: 0000000000000002 R09: 0000000000000000 R10: 00007ffc93c49120 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc93c49804 R14: 0000000000000001 R15: 000000000066afa0 Code: 5f 00 48 8b 43 20 48 c7 c7 70 2f 7c b8 c7 40 10 00 00 00 00 5b e9 a5 8b 61 00 0f 1f 44 00 00 0f 1f 44 00 00 41 54 55 48 89 fd 53 <48> 8b 47 20 f0 ff 08 74 05 5b 5d 41 5c c3 41 89 f4 0f 1f 44 00 RIP: __bpf_prog_put+0xc/0xc0 RSP: ffff9594003ef728 CR2: 0000000000000020 Fix it in tcf_bpf_cfg_cleanup(), ensuring that bpf_prog_{put,destroy}(f) is called only when f is not NULL. Fixes: bbc09e78 ("net/sched: fix idr leak on the error path of tcf_bpf_init()") Reported-by:
Lucas Bates <lucasb@mojatatu.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Alexander Potapenko authored
[ Upstream commit 78802879 ] KMSAN reports use of uninitialized memory in the case when |alen| is smaller than sizeof(struct sockaddr_nl), and therefore |nladdr| isn't fully copied from the userspace. Signed-off-by:
Alexander Potapenko <glider@google.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
David Ahern authored
[ Upstream commit b6cdbc85 ] Donald reported that IPv6 route leaking between VRFs is not working. The root cause is the strict argument in the call to rt6_lookup when validating the nexthop spec. ip6_route_check_nh validates the gateway and device (if given) of a route spec. It in turn could call rt6_lookup (e.g., lookup in a given table did not succeed so it falls back to a full lookup) and if so sets the strict argument to 1. That means if the egress device is given, the route lookup needs to return a result with the same device. This strict requirement does not work with VRFs (IPv4 or IPv6) because the oif in the flow struct is overridden with the index of the VRF device to trigger a match on the l3mdev rule and force the lookup to its table. The right long term solution is to add an l3mdev index to the flow struct such that the oif is not overridden. That solution will not backport well, so this patch aims for a simpler solution to relax the strict argument if the route spec device is an l3mdev slave. As done in other places, use the FLOWI_FLAG_SKIP_NH_OIF to know that the RT6_LOOKUP_F_IFACE flag needs to be removed. Fixes: ca254490 ("net: Add VRF support to IPv6 stack") Reported-by:
Donald Sharp <sharpd@cumulusnetworks.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 1dfe82eb ] skb mac header is not necessarily set at the time skb_network_protocol() is called. Use skb->data instead. BUG: KASAN: slab-out-of-bounds in skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739 Read of size 2 at addr ffff8801b3097a0b by task syz-executor5/14242 CPU: 1 PID: 14242 Comm: syz-executor5 Not tainted 4.16.0-rc6+ #280 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x23c/0x360 mm/kasan/report.c:412 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:443 skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739 harmonize_features net/core/dev.c:2924 [inline] netif_skb_features+0x509/0x9b0 net/core/dev.c:3011 validate_xmit_skb+0x81/0xb00 net/core/dev.c:3084 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3142 packet_direct_xmit+0x117/0x790 net/packet/af_packet.c:256 packet_snd net/packet/af_packet.c:2944 [inline] packet_sendmsg+0x3aed/0x60b0 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xca/0x110 net/socket.c:639 ___sys_sendmsg+0x767/0x8b0 net/socket.c:2047 __sys_sendmsg+0xe5/0x210 net/socket.c:2081 Fixes: 19acc327 ("gso: Handle Trans-Ether-Bridging protocol in skb_network_protocol()") Signed-off-by:
-
Miguel Fadon Perlines authored
[ Upstream commit 58b35f27 ] arp_filter performs an ip_route_output search for arp source address and checks if output device is the same where the arp request was received, if it is not, the arp request is not answered. This route lookup is always done on main route table so l3slave devices never find the proper route and arp is not answered. Passing l3mdev_master_ifindex_rcu(dev) return value as oif fixes the lookup for l3slave devices while maintaining same behavior for non l3slave devices as this function returns 0 in that case. Fixes: 613d09b3 ("net: Use VRF device index for lookups on TX") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Arnd Bergmann authored
commit b41c29b0 upstream. The default __UNIQUE_ID macro in compiler.h fails to work for some drivers: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:615:1: error: redefinition of '__UNIQUE_ID_firmware615' BRCMF_FW_NVRAM_DEF(4354, "brcmfmac4354-sdio.bin", "brcmfmac4354-sdio.txt"); This adds a copy of the version we use for gcc-4.3 and higher, as the same one works with all versions of clang that I could find in svn (2.6 and higher). Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Michal Marek <mmarek@suse.com> Cc: Matthias Kaehlcke <mka@google.com> Signed-off-by:
-
Mel Gorman authored
commit 65d8fc77 upstream. When dealing with key handling for shared futexes, we can drastically reduce the usage/need of the page lock. 1) For anonymous pages, the associated futex object is the mm_struct which does not require the page lock. 2) For inode based, keys, we can check under RCU read lock if the page mapping is still valid and take reference to the inode. This just leaves one rare race that requires the page lock in the slow path when examining the swapcache. Additionally realtime users currently have a problem with the page lock being contended for unbounded periods of time during futex operations. Task A get_futex_key() lock_page() ---> preempted Now any other task trying to lock that page will have to wait until task A gets scheduled back in, which is an unbound time. With this patch, we pretty much have a lockless futex_get_key(). Experiments show that this patch can boost/speedup the hashing of shared futexes with the perf futex benchmarks (which is good for measuring such change) by up to 45% when there are high (> 100) thread counts on a 60 core Westmere. Lower counts are pretty much in the noise range or less than 10%, but mid range can be seen at over 30% overall throughput (hash ops/sec). This makes anon-mem shared futexes much closer to its private counterpart. Signed-off-by:
Mel Gorman <mgorman@suse.de> [ Ported on top of thp refcount rework, changelog, comments, fixes. ] Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Chris Mason <clm@fb.com> Cc: Darren Hart <dvhart@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: dave@stgolabs.net Link: http://lkml.kernel.org/r/1455045314-8305-3-git-send-email-dave@stgolabs.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Chenbo Feng <fengc@google.com> Signed-off-by:
-
Theodore Ts'o authored
commit 92e75428 upstream. Linus pointed out that there is a much more efficient way of avoiding the problem that we were trying to address in commit 9dfa7bba: "fix race in drivers/char/random.c:get_reg()". Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
Kernels that do not have f6b10209 ("virtio-net: switch to use build_skb() for small buffer") will have an extra call to skb_to_sgvec that is not handled by e2fcad58 ("virtio_net: check return value of skb_to_sgvec always"). Since the former does not appear to be stable material, just fix the call up directly. Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit e2fcad58 upstream. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit 89a5ea99 upstream. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit 3f297707 upstream. Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit fa1195cc ] We need to increase output offset in each iteration, not decrease it as we currently do. I guess we were lucky to finish in most cases in first iteration, so the bug never showed. However it shows a lot when working with big (~4GB) size data. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 9c9f5a2f ("perf tools: Introduce copyfile_offset() function") Link: http://lkml.kernel.org/r/20180109133923.25406-1-jolsa@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Arjun Vynipadath authored
[ Upstream commit ea0a4210 ] We'd come in with SGE_FL_BUFFER_SIZE[0] and [1] both equal to 64KB and the extant logic would flag that as an error. This was already fixed in cxgb4 driver with "92ddcc7b cxgb4: Fix some small bugs in t4_sge_init_soft() when our Page Size is 64KB". Original Work by: Casey Leedom <leedom@chelsio.com> Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 68fa24f9 ] We should not call edac_mc_del_mc() if a corresponding call to edac_mc_add_mc() has not been performed yet. So here, we should go to err instead of err2 to branch at the right place of the error handling path. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180107205400.14068-1-christophe.jaillet@wanadoo.frSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit ea3d8465 ] Some devices have the control dlci stay in ADM mode instead of the UA mode. This can seen at least on droid 4 when trying to open the ts 27.010 mux port. Enabling n_gsm debug mode shows the control dlci always respond with DM to SABM instead of UA: # modprobe n_gsm debug=0xff # ldattach -d GSM0710 /dev/ttyS0 & gsmld_output: 00000000: f9 03 3f 01 1c f9 --> 0) C: SABM(P) gsmld_receive: 00000000: f9 03 1f 01 36 f9 <-- 0) C: DM(P) ... $ minicom -D /dev/gsmtty1 minicom: cannot open /dev/gsmtty1: No error information $ strace minicom -D /dev/gsmtty1 ... open("/dev/gsmtty1", O_RDWR|O_NOCTTY|O_NONBLOCK|O_LARGEFILE) = -1 EL2HLT Note that this is different issue from other n_gsm -EL2HLT issues such as timeouts when the control dlci does not respond at all. The ADM mode seems to be a quite common according to "RF Wireless World" article "GSM Issue-UE sends SABM and gets a DM response instead of UA response": This issue is most commonly observed in GSM networks where in UE sends SABM and expects network to send UA response but it ends up receiving DM response from the network. SABM stands for Set asynchronous balanced mode, UA stands for Unnumbered Acknowledge and DA stands for Disconnected Mode. An RLP entity can be in one of two modes: - Asynchronous Balanced Mode (ABM) - Asynchronous Disconnected Mode (ADM) Currently Linux kernel closes the control dlci after several retries in gsm_dlci_t1() on DM. This causes n_gsm /dev/gsmtty ports to produce error code -EL2HLT when trying to open them as the closing of control dlci has already set gsm->dead. Let's fix the issue by allowing control dlci stay in ADM mode after the retries so the /dev/gsmtty ports can be opened and used. It seems that it might take several attempts to get any response from the control dlci, so it's best to allow ADM mode only after the SABM retries are done. Note that for droid 4 additional patches are needed to mux the ttyS0 pins and to toggle RTS gpio_149 to wake up the mdm6600 modem are also needed to use n_gsm. And the mdm6600 modem needs to be powered on. Cc: linux-serial@vger.kernel.org Cc: Alan Cox <alan@llwyncelyn.cymru> Cc: Jiri Prchal <jiri.prchal@aksignal.cz> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Russ Gorby <russ.gorby@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Ming Lei authored
[ Upstream commit 8ab0b7dc ] HW queues may be unmapped in some cases, such as blk_mq_update_nr_hw_queues(), then we need to check it before calling blk_mq_tag_idle(), otherwise the following kernel oops can be triggered, so fix it by checking if the hw queue is unmapped since it doesn't make sense to idle the tags any more after hw queues are unmapped. [ 440.771298] Workqueue: nvme-wq nvme_rdma_del_ctrl_work [nvme_rdma] [ 440.779104] task: ffff894bae755ee0 ti: ffff893bf9bc8000 task.ti: ffff893bf9bc8000 [ 440.788359] RIP: 0010:[<ffffffffb730e2b4>] [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40 [ 440.798697] RSP: 0018:ffff893bf9bcbd10 EFLAGS: 00010286 [ 440.805538] RAX: 0000000000000000 RBX: ffff895bb131dc00 RCX: 000000000000011f [ 440.814426] RDX: 00000000ffffffff RSI: 0000000000000120 RDI: ffff895bb131dc00 [ 440.823301] RBP: ffff893bf9bcbd10 R08: 000000000001b860 R09: 4a51d361c00c0000 [ 440.832193] R10: b5907f32b4cc7003 R11: ffffd6cabfb57000 R12: ffff894bafd1e008 [ 440.841091] R13: 0000000000000001 R14: ffff895baf770000 R15: 0000000000000080 [ 440.849988] FS: 0000000000000000(0000) GS:ffff894bbdcc0000(0000) knlGS:0000000000000000 [ 440.859955] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 440.867274] CR2: 0000000000000008 CR3: 000000103d098000 CR4: 00000000001407e0 [ 440.876169] Call Trace: [ 440.879818] [<ffffffffb7309d68>] blk_mq_exit_hctx+0xd8/0xe0 [ 440.887051] [<ffffffffb730dc40>] blk_mq_free_queue+0xf0/0x160 [ 440.894465] [<ffffffffb72ff679>] blk_cleanup_queue+0xd9/0x150 [ 440.901881] [<ffffffffc08a802b>] nvme_ns_remove+0x5b/0xb0 [nvme_core] [ 440.910068] [<ffffffffc08a811b>] nvme_remove_namespaces+0x3b/0x60 [nvme_core] [ 440.919026] [<ffffffffc08b817b>] __nvme_rdma_remove_ctrl+0x2b/0xb0 [nvme_rdma] [ 440.928079] [<ffffffffc08b8237>] nvme_rdma_del_ctrl_work+0x17/0x20 [nvme_rdma] [ 440.937126] [<ffffffffb70ab58a>] process_one_work+0x17a/0x440 [ 440.944517] [<ffffffffb70ac3a8>] worker_thread+0x278/0x3c0 [ 440.951607] [<ffffffffb70ac130>] ? manage_workers.isra.24+0x2a0/0x2a0 [ 440.959760] [<ffffffffb70b352f>] kthread+0xcf/0xe0 [ 440.966055] [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40 [ 440.973715] [<ffffffffb76d8658>] ret_from_fork+0x58/0x90 [ 440.980586] [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40 [ 440.988229] Code: 5b 41 5c 5d c3 66 90 0f 1f 44 00 00 48 8b 87 20 01 00 00 f0 0f ba 77 40 01 19 d2 85 d2 75 08 c3 0f 1f 80 00 00 00 00 55 48 89 e5 <f0> ff 48 08 48 8d 78 10 e8 7f 0f 05 00 5d c3 0f 1f 00 66 2e 0f [ 441.011620] RIP [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40 [ 441.019301] RSP <ffff893bf9bcbd10> [ 441.024052] CR2: 0000000000000008 Reported-by:
Zhang Yi <yizhan@redhat.com> Tested-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
