- 09 Mar, 2018 1 commit
-
-
Hans de Goede authored
commit 1fdb9269 upstream. Commit 61f5acea ("Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" version") applied the USB_QUIRK_RESET_RESUME to all QCA USB Bluetooth modules. But it turns out that the resume problems are not caused by the QCA Rome chipset, on most platforms it resumes fine. The resume problems are actually a platform problem (likely the platform cutting all power when suspended). The USB_QUIRK_RESET_RESUME quirk also disables runtime suspend, so by matching on usb-ids, we're causing all boards with these chips to use extra power, to fix resume problems which only happen on some boards. This commit fixes this by applying the quirk based on DMI matching instead of on usb-ids, so that we match the platform and not the chipset. Here is the /sys/kernel/debug/usb/devices for the Bluetooth module: T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e300 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Fixes: 61f5acea ("Bluetooth: btusb: Restore QCA Rome suspend/resume..") Cc: stable@vger.kernel.org Cc: Brian Norris <briannorris@chromium.org> Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Reported-and-tested-by:
Kevin Fenzi <kevin@scrye.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 03 Mar, 2018 39 commits
-
-
Greg Kroah-Hartman authored
-
Jiri Pirko authored
commit df45bf84 upstream. Since the block is freed with last chain being put, once we reach the end of iteration of list_for_each_entry_safe, the block may be already freed. I'm hitting this only by creating and deleting clsact: [ 202.171952] ================================================================== [ 202.180182] BUG: KASAN: use-after-free in tcf_block_put_ext+0x240/0x390 [ 202.187590] Read of size 8 at addr ffff880225539a80 by task tc/796 [ 202.194508] [ 202.196185] CPU: 0 PID: 796 Comm: tc Not tainted 4.15.0-rc2jiri+ #5 [ 202.203200] Hardware name: Mellanox Technologies Ltd. "MSN2100-CB2F"/"SA001017", BIOS 5.6.5 06/07/2016 [ 202.213613] Call Trace: [ 202.216369] dump_stack+0xda/0x169 [ 202.220192] ? dma_virt_map_sg+0x147/0x147 [ 202.224790] ? show_regs_print_info+0x54/0x54 [ 202.229691] ? tcf_chain_destroy+0x1dc/0x250 [ 202.234494] print_address_description+0x83/0x3d0 [ 202.239781] ? tcf_block_put_ext+0x240/0x390 [ 202.244575] kasan_report+0x1ba/0x460 [ 202.248707] ? tcf_block_put_ext+0x240/0x390 [ 202.253518] tcf_block_put_ext+0x240/0x390 [ 202.258117] ? tcf_chain_flush+0x290/0x290 [ 202.262708] ? qdisc_hash_del+0x82/0x1a0 [ 202.267111] ? qdisc_hash_add+0x50/0x50 [ 202.271411] ? __lock_is_held+0x5f/0x1a0 [ 202.275843] clsact_destroy+0x3d/0x80 [sch_ingress] [ 202.281323] qdisc_destroy+0xcb/0x240 [ 202.285445] qdisc_graft+0x216/0x7b0 [ 202.289497] tc_get_qdisc+0x260/0x560 Fix this by holding the block also by chain 0 and put chain 0 explicitly, out of the list_for_each_entry_safe loop at the very end of tcf_block_put_ext. Fixes: efbf7897 ("net_sched: get rid of rcu_barrier() in tcf_block_put_ext()") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Cong Wang authored
commit efbf7897 upstream. Both Eric and Paolo noticed the rcu_barrier() we use in tcf_block_put_ext() could be a performance bottleneck when we have a lot of tc classes. Paolo provided the following to demonstrate the issue: tc qdisc add dev lo root htb for I in `seq 1 1000`; do tc class add dev lo parent 1: classid 1:$I htb rate 100kbit tc qdisc add dev lo parent 1:$I handle $((I + 1)): htb for J in `seq 1 10`; do tc filter add dev lo parent $((I + 1)): u32 match ip src 1.1.1.$J done done time tc qdisc del dev root real 0m54.764s user 0m0.023s sys 0m0.000s The rcu_barrier() there is to ensure we free the block after all chains are gone, that is, to queue tcf_block_put_final() at the tail of workqueue. We can achieve this ordering requirement by refcnt'ing tcf block instead, that is, the tcf block is freed only when the last chain in this block is gone. This also simplifies the code. Paolo reported after this patch we get: real 0m0.017s user 0m0.000s sys 0m0.017s Tested-by:
Paolo Abeni <pabeni@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Roman Kapl authored
commit a60b3f51 upstream. tcf_block_put_ext has assumed that all filters (and thus their goto actions) are destroyed in RCU callback and thus can not race with our list iteration. However, that is not true during netns cleanup (see tcf_exts_get_net comment). Prevent the user after free by holding all chains (except 0, that one is already held). foreach_safe is not enough in this case. To reproduce, run the following in a netns and then delete the ns: ip link add dtest type dummy tc qdisc add dev dtest ingress tc filter add dev dtest chain 1 parent ffff: handle 1 prio 1 flower action goto chain 2 Fixes: 822e86d9 ("net_sched: remove tcf_block_put_deferred()") Signed-off-by:
Roman Kapl <code@rkapl.cz> Acked-by:
-
Roman Kapl authored
commit d7aa04a5 upstream. If you flush (delete) a filter chain other than chain 0 (such as when deleting the device), the kernel may run into a use-after-free. The chain refcount must not be decremented unless we are sure we are done with the chain. To reproduce the bug, run: ip link add dtest type dummy tc qdisc add dev dtest ingress tc filter add dev dtest chain 1 parent ffff: flower ip link del dtest Introduced in: commit f93e1cdc ("net/sched: fix filter flushing"), but unless you have KAsan or luck, you won't notice it until commit 0dadc117 ("cls_flower: use tcf_exts_get_net() before call_rcu()") Fixes: f93e1cdc ("net/sched: fix filter flushing") Acked-by:
-
Antoine Tenart authored
commit 760b3843 upstream. This patch adds comphy phandles to the Ethernet ports in the mcbin device tree. The comphy is used to configure the serdes PHYs used by these ports. Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Antoine Tenart authored
commit 910d1bf2 upstream. This patch describes the comphy available in the cp110 master and slave. This comphy provides serdes lanes used by various controllers such as the network one. Signed-off-by:
-
Sam Bobroff authored
commit c9dccf1d upstream. Currently if the kernel receives a memory hot-unplug event early enough, it may get stuck in an infinite loop in dissolve_free_huge_pages(). This appears as a stall just after: pseries-hotplug-mem: Attempting to hot-remove XX LMB(s) at YYYYYYYY It appears to be caused by "minimum_order" being uninitialized, due to init_ras_IRQ() executing before hugetlb_init(). To correct this, extract the part of init_ras_IRQ() that enables hotplug event processing and place it in the machine_late_initcall phase, which is guaranteed to be after hugetlb_init() is called. Signed-off-by:
Sam Bobroff <sam.bobroff@au1.ibm.com> Acked-by:
Balbir Singh <bsingharora@gmail.com> [mpe: Reorder the functions to make the diff readable] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
James Hogan authored
commit ebabcf17 upstream. GCC7 is a bit too eager to generate suboptimal __multi3 calls (128bit multiply with 128bit result) for MIPS64r6 builds, even in code which doesn't explicitly use 128bit types, such as the following: unsigned long func(unsigned long a, unsigned long b) { return a > (~0UL) / b; } Which GCC rearanges to: return (unsigned __int128)a * (unsigned __int128)b > 0xffffffffffffffff; Therefore implement __multi3, but only for MIPS64r6 with GCC7 as under normal circumstances we wouldn't expect any calls to __multi3 to be generated from kernel code. Reported-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
James Hogan <jhogan@kernel.org> Tested-by:
Waldemar Brodkorb <wbx@openadk.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maciej W. Rozycki <macro@mips.com> Cc: Matthew Fortune <matthew.fortune@mips.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17890/ Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Yuval Mintz authored
[ Upstream commit 8e033a93 ] After performing reset driver polls on HW indication until learning that the reset is done, but immediately after reset the device becomes unresponsive which might lead to completion timeout on the first read. Wait for 100ms before starting the polling. Fixes: 233fa44b ("mlxsw: pci: Implement reset done check") Signed-off-by:
Yuval Mintz <yuvalm@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit fc233650 ] The link state and exception interrupts may be masked when we probe. The firmware should in theory prevent sending (and automasking) those interrupts if the device is disabled, but if my reading of the FW code is correct there are firmwares out there with race conditions in this area. The interrupt may also be masked if previous driver which used the device was malfunctioning and we didn't load the FW (there is no other good way to comprehensively reset the PF). Note that FW unmasks the data interrupts by itself when vNIC is enabled, such helpful operation is not performed for LSC/EXN interrupts. Always unmask the auxiliary interrupts after request_irq(). On the remove path add missing PCI write flush before free_irq(). Fixes: 4c352362 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
Madalin Bucur authored
[ Upstream commit 95f566de ] If one of the child devices is missing the of_mdiobus_register_phy() call will return -ENODEV. When a missing device is encountered the registration of the remaining PHYs is stopped and the MDIO bus will fail to register. Propagate all errors except ENODEV to avoid it. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Reviewed-by:
-
Yangbo Lu authored
[ Upstream commit 11d827a9 ] set_fipers() calling should be protected by spinlock in case that any interrupt breaks related registers setting and the function we expect. This patch is to move set_fipers() to spinlock protecting area in ptp_gianfar_adjtime(). Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit c76f97c9 ] Some sockopt handling functions were calculating the length of the buffer to be written to userspace and then calculating it again when actually writing the buffer, which could lead to some write not using an up-to-date length. This patch updates such places to just make use of the len variable. Also, replace some sizeof(type) to sizeof(var). Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit 5960cefa ] Hangbin Liu reported that some sockopt calls could cause the kernel to log a warning on memory allocation failure if the user supplied a large optlen value. That is because some of them called memdup_user() without a ceiling on optlen, allowing it to try to allocate really large buffers. This patch adds a ceiling by limiting optlen to the maximum allowed that would still make sense for these sockopt. Reported-by:
Hangbin Liu <haliu@redhat.com> Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit cf2acf66 ] When cleaning up after a partially successful gntdev_mmap(), unmap the successfully mapped grant pages otherwise Xen will kill the domain if in debug mode (Attempt to implicitly unmap a granted PTE) or Linux will kill the process and emit "BUG: Bad page map in process" if Xen is in release mode. This is only needed when use_ptemod is true because gntdev_put_map() will unmap grant pages itself when use_ptemod is false. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit 951a0102 ] If the requested range has a hole, the calculation of the number of pages to unmap is off by one. Fix it. Signed-off-by:
-
Sergei Shtylyov authored
[ Upstream commit 195e2add ] The 'sh_eth' driver's probe() method would fail on the SolutionEngine7710 board and crash on SolutionEngine7712 board as the platform code is hopelessly behind the driver's platform data -- it passes the PHY address instead of 'struct sh_eth_plat_data *'; pass the latter to the driver in order to fix the bug... Fixes: 71557a37 ("[netdrvr] sh_eth: Add SH7619 support") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 56c02902 ] If the probing of the regulator is deferred, the memory allocated by 'mdiobus_alloc_size()' will be leaking. It should be freed before the next call to 'sun4i_mdio_probe()' which will reallocate it. Fixes: 4bdcb1dd ("net: Add MDIO bus driver for the Allwinner EMAC") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Eduardo Otubo authored
[ Upstream commit b707fda2 ] When loading the module after unloading it, the network interface would not be enabled and thus wouldn't have a backend counterpart and unable to be used by the guest. The guest would face errors like: [root@guest ~]# ethtool -i eth0 Cannot get driver information: No such device [root@guest ~]# ifconfig eth0 eth0: error fetching interface information: Device not found This patch initializes the state of the netfront device whenever it is loaded manually, this state would communicate the netback to create its device and establish the connection between them. Signed-off-by:
Eduardo Otubo <otubo@redhat.com> Reviewed-by:
-
Venkat Duvvuru authored
[ Upstream commit 78f30004 ] In bnxt_vf_ndo_prep (which is called by bnxt_get_vf_config ndo), there is a check for "Invalid VF id". Currently, the check is done against max_vfs. However, the user doesn't always create max_vfs. So, the check should be against the created number of VFs. The number of bnxt_vf_info structures that are allocated in bnxt_alloc_vf_resources routine is the "number of requested VFs". So, if an "invalid VF id" falls between the requested number of VFs and the max_vfs, the driver will be dereferencing an invalid pointer. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
Venkat Devvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Sunil Challa authored
[ Upstream commit 7deea450 ] flow_type in HWRM_FLOW_ALLOC is not being populated correctly due to incorrect passing of pointer and size of l3_mask argument of is_wildcard(). Fixed this. Fixes: db1d36a2 ("bnxt_en: add TC flower offload flow_alloc/free FW cmds") Signed-off-by:
Sunil Challa <sunilkumar.challa@broadcom.com> Reviewed-by:
Sathya Perla <sathya.perla@broadcom.com> Reviewed-by:
-
Andy Shevchenko authored
[ Upstream commit 9d0513d8 ] So one of the constification patches unearthed a type casting fragility of the underlying code: 276c8705 ("x86/platform/intel-mid: Make 'bt_sfi_data' const") converted the struct to be const while it is also used as a temporary container for important data that is used to fill 'parent' and 'name' fields in struct platform_device_info. The compiler doesn't notice this due to an explicit type cast that loses the const - which fragility will be fixed separately. This type cast turned a seemingly trivial const propagation patch into a hard to debug data corruptor and crasher bug. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bhumika Goyal <bhumirks@gmail.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: julia.lawall@lip6.fr Cc: platform-driver-x86@vger.kernel.org Link: http://lkml.kernel.org/r/20171228122523.21802-1-andriy.shevchenko@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ewan D. Milne authored
[ Upstream commit 6b018235 ] The field was uninitialized before use. Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit e2d59152 ] The hotplug code uses its own workqueue to handle IRQ requests (pseries_hp_wq), however that workqueue is initialized after init_ras_IRQ(). That can lead to a kernel panic if any hotplug interrupts fire after init_ras_IRQ() but before pseries_hp_wq is initialised. eg: UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes) NET: Registered protocol family 1 Unpacking initramfs... (qemu) object_add memory-backend-ram,id=mem1,size=10G (qemu) device_add pc-dimm,id=dimm1,memdev=mem1 Unable to handle kernel paging request for data at address 0xf94d03007c421378 Faulting instruction address: 0xc00000000012d744 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-ziviani+ #26 task: (ptrval) task.stack: (ptrval) NIP: c00000000012d744 LR: c00000000012d744 CTR: 0000000000000000 REGS: (ptrval) TRAP: 0380 Not tainted (4.15.0-rc2-ziviani+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 28088042 XER: 20040000 CFAR: c00000000012d3c4 SOFTE: 0 ... NIP [c00000000012d744] __queue_work+0xd4/0x5c0 LR [c00000000012d744] __queue_work+0xd4/0x5c0 Call Trace: [c0000000fffefb90] [c00000000012d744] __queue_work+0xd4/0x5c0 (unreliable) [c0000000fffefc70] [c00000000012dce4] queue_work_on+0xb4/0xf0 This commit makes the RAS IRQ registration explicitly dependent on the creation of the pseries_hp_wq. Reported-by:
Min Deng <mdeng@redhat.com> Reported-by:
Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> Tested-by:
Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com> Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Jacek Anaszewski authored
[ Upstream commit 7b6af2c5 ] Commit 2b83ff96 ("led: core: Fix brightness setting when setting delay_off=0") replaced del_timer_sync(&led_cdev->blink_timer) with led_stop_software_blink() in led_blink_set(), which additionally clears LED_BLINK_SW flag as well as zeroes blink_delay_on and blink_delay_off properties of the struct led_classdev. Cleansing of the latter ones wasn't required to fix the original issue but wasn't considered harmful. It nonetheless turned out to be so in case when pointer to one or both props is passed to led_blink_set() like in the ledtrig-timer.c. In such cases zeroes are passed later in delay_on and/or delay_off arguments to led_blink_setup(), which results either in stopping the software blinking or setting blinking frequency always to 1Hz. Avoid using led_stop_software_blink() and add a single call required to clear LED_BLINK_SW flag, which was the only needed modification to fix the original issue. Fixes 2b83ff96 ("led: core: Fix brightness setting when setting delay_off=0") Signed-off-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
-
John Fastabend authored
[ Upstream commit 5731a879 ] Add psock NULL check to handle a racing sock event that can get the sk_callback_lock before this case but after xchg happens causing the refcnt to hit zero and sock user data (psock) to be null and queued for garbage collection. Also add a comment in the code because this is a bit subtle and not obvious in my opinion. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Valentin Ilie authored
[ Upstream commit 7729bebc ] Remove the extra parenthesis. This bug was introduced by: e2339a4c: ("ia64: Convert vtime to use nsec units directly") Signed-off-by:
Valentin Ilie <valentin.ilie@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: fenghua.yu@intel.com Cc: linux-ia64@vger.kernel.org Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/1515193979-24873-1-git-send-email-valentin.ilie@gmail.comSigned-off-by:
-
Ming Lei authored
[ Upstream commit 454be724 ] Now we track legacy requests with .q_usage_counter in commit 055f6e18 ("block: Make q_usage_counter also track legacy requests"), but that commit never runs and drains legacy queue before waiting for this counter becoming zero, then IO hang is caused in the test of pulling disk during IO. This patch fixes the issue by draining requests before waiting for q_usage_counter becoming zero, both Mauricio and chenxiang reported this issue, and observed that it can be fixed by this patch. Link: https://marc.info/?l=linux-block&m=151192424731797&w=2 Fixes: 055f6e18("block: Make q_usage_counter also track legacy requests") Cc: Wen Xiong <wenxiong@us.ibm.com> Tested-by:
"chenxiang (M)" <chenxiang66@hisilicon.com> Tested-by:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Loic Poulain authored
[ Upstream commit 0856655a ] Since driver does not report hardware dynamic power saving cap, this is up to the mac80211 to manage power saving timeout and state machine, using the ieee80211 config callback to report PS changes. This patch enables/disables PS mode according to the new configuration. Remove old behaviour enabling PS mode in a static way, this make the device unusable when power save is enabled since device is forced to PS regardless RX/TX traffic. Acked-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Luu An Phu authored
[ Upstream commit 13454c14 ] The flexcan_start_xmit() function compares the frame length with data register length to write frame content into data[0] and data[1] register. Data register length is 4 bytes and frame maximum length is 8 bytes. Fix the check that compares frame length with 3. Because the register length is 4. Signed-off-by:
Luu An Phu <phu.luuan@nxp.com> Reviewed-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 736a80bb ] If there are multiple mesh stations with the same MAC address, they will both get confused and start throwing warnings. Obviously in this case nothing can actually work anyway, so just drop frames that look like they're from ourselves early on. Reported-by:
Gui Iribarren <gui@altermundi.net> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Hao Chen authored
[ Upstream commit 3ea15452 ] nl80211_nan_add_func() does not check if the required attribute NL80211_NAN_FUNC_FOLLOW_UP_DEST is present when processing NL80211_CMD_ADD_NAN_FUNCTION request. This request can be issued by users with CAP_NET_ADMIN privilege and may result in NULL dereference and a system crash. Add a check for the required attribute presence. Signed-off-by:
Hao Chen <flank3rsky@gmail.com> Signed-off-by:
-
Netanel Belgazal authored
[ Upstream commit 7853b49c ] Under certain conditions MSI-X interrupt might arrive right after it was unmasked in ena_up(). There is a chance it would be processed by the driver before device ENA_FLAG_DEV_UP flag is set. In such a case the interrupt is ignored. ENA device operates in auto-masked mode, therefore ignoring interrupt leaves it masked for good. Moving unmask of interrupt to be the last step in ena_up(). Signed-off-by:
Netanel Belgazal <netanel@amazon.com> Signed-off-by:
-
Jacob Keller authored
[ Upstream commit 458867b2 ] In some circumstances, such as with bridging, it is possible that the stack will add a devices own MAC address to its unicast address list. If, later, the stack deletes this address, then the i40e driver will receive a request to remove this address. The driver stores its current MAC address as part of the MAC/VLAN hash array, since it is convenient and matches exactly how the hardware expects to be told which traffic to receive. This causes a problem, since for more devices, the MAC address is stored separately, and requests to delete a unicast address should not have the ability to remove the filter for the MAC address. Fix this by forcing a check on every address sync to ensure we do not remove the device address. There is a very narrow possibility of a race between .set_mac and .set_rx_mode, if we don't change netdev->dev_addr before updating our internal MAC list in .set_mac. This might be possible if .set_rx_mode is going to remove MAC "XYZ" from the list, at the same time as .set_mac changes our dev_addr to MAC "XYZ", we might possibly queue a delete, then an add in .set_mac, then queue a delete in .set_rx_mode's dev_uc_sync and then update netdev->dev_addr. We can avoid this by moving the copy into dev_addr prior to the changes to the MAC filter list. A similar race on the other side does not cause problems, as if we're changing our MAC form A to B, and we race with .set_rx_mode, it could queue a delete from A, we'd update our address, and allow the delete. This seems like a race, but in reality we're about to queue a delete of A anyways, so it would not cause any issues. A race in the initialization code is unlikely because the netdevice has not yet been fully initialized and the stack should not be adding or removing addresses yet. Note that we don't (yet) need similar code for the VF driver because it does not make use of __dev_uc_sync and __dev_mc_sync, but instead roles its own method for handling updates to the MAC/VLAN list, which already has code to protect against removal of the hardware address. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Alexander Duyck authored
[ Upstream commit 248de22e ] The original code for __i40e_chk_linearize didn't take into account the fact that if a fragment is 16K in size or larger it has to be split over 2 descriptors and the smaller of those 2 descriptors will be on the trailing edge of the transmit. As a result we can get into situations where we didn't catch requests that could result in a Tx hang. This patch takes care of that by subtracting the length of all but the trailing edge of the stale fragment before we test for sum. By doing this we can guarantee that we have all cases covered, including the case of a fragment that spans multiple descriptors. We don't need to worry about checking the inner portions of this since 12K is the maximum aligned DMA size and that is larger than any MSS will ever be since the MTU limit for jumbos is something on the order of 9K. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
Felix Janda authored
[ Upstream commit c0bace79 ] libc-compat.h aims to prevent symbol collisions between uapi and libc headers for each supported libc. This requires continuous coordination between them. The goal of this commit is to improve the situation for libcs (such as musl) which are not yet supported and/or do not wish to be explicitly supported, while not affecting supported libcs. More precisely, with this commit, unsupported libcs can request the suppression of any specific uapi definition by defining the correspondings _UAPI_DEF_* macro as 0. This can fix symbol collisions for them, as long as the libc headers are included before the uapi headers. Inclusion in the other order is outside the scope of this commit. All infrastructure in order to enable this fallback for unsupported libcs is already in place, except that libc-compat.h unconditionally defines all _UAPI_DEF_* macros to 1 for all unsupported libcs so that any previous definitions are ignored. In order to fix this, this commit merely makes these definitions conditional. This commit together with the musl libc commit http://git.musl-libc.org/cgit/musl/commit/?id=04983f2272382af92eb8f8838964ff944fbb8258 fixes for example the following compiler errors when <linux/in6.h> is included after musl's <netinet/in.h>: ./linux/in6.h:32:8: error: redefinition of 'struct in6_addr' ./linux/in6.h:49:8: error: redefinition of 'struct sockaddr_in6' ./linux/in6.h:59:8: error: redefinition of 'struct ipv6_mreq' The comments referencing glibc are still correct, but this file is not only used for glibc any more. Signed-off-by:
Felix Janda <felix.janda@posteo.de> Reviewed-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Dave Young authored
[ Upstream commit 835bcec5 ] 'add_efi_memmap' is an early param, but do_add_efi_memmap() has no chance to run because the code path is before parse_early_param(). I believe it worked when the param was introduced but probably later some other changes caused the wrong order and nobody noticed it. Move efi_memblock_x86_reserve_range() after parse_early_param() to fix it. Signed-off-by:
Dave Young <dyoung@redhat.com> Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Ge Song <ge.song@hxt-semitech.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180102172110.17018-2-ard.biesheuvel@linaro.orgSigned-off-by:
-
Leon Romanovsky authored
[ Upstream commit f8978bd9 ] Holding locks is mandatory when calling __ib_device_get_by_index, otherwise there are races during the list iteration with device removal. Since the locks are static to device.c, __ib_device_get_by_index can never be called correctly by any user out side the file. Make the function static and provide a safe function that gets the correct locks and returns a kref'd pointer. Fix all callers. Fixes: e5c9469e ("RDMA/netlink: Add nldev device doit implementation") Fixes: c3f66f7b ("RDMA/netlink: Implement nldev port doit callback") Fixes: 7d02f605 ("RDMA/netlink: Add nldev port dumpit implementation") Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
