- 13 Apr, 2016 12 commits
-
-
Hans Verkuil authored
This simplifies the querycap function. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
With the new core support for the caps the driver no longer needs to set device_caps and capabilities in the querycap call. Signed-off-by:
-
Hans Verkuil authored
Instead of letting drivers fill in device_caps at querycap time, let them fill it in when the video device is registered. This has the advantage that in the future the v4l2 core can access the video device's capabilities and take decisions based on that. Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/platform/exynos-gsc/gsc-core.c:1073 gsc_probe() warn: impossible condition '(gsc->id < 0) => (0-65535 < 0)' drivers/media/platform/exynos-gsc/gsc-core.c: In function 'gsc_probe': drivers/media/platform/exynos-gsc/gsc-core.c:1073:51: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (gsc->id >= drv_data->num_entities || gsc->id < 0) { ^ gsc->id is an u16, so it can never be a negative number. So, remove the always false condition. Fixes: c1ac0571 "[media] exynos-gsc: remove non-device-tree init code" Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: -
Julia Lawall authored
The mxr_layer_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
Exynos and Samsung S5P platforms has been fully converted to device tree, so old platform device based init data can be now removed. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
Exynos and Samsung S5P platforms has been fully converted to device tree, so old platform device based init data can be now removed. Signed-off-by:
-
Marek Szyprowski authored
Exynos and Samsung S5P platforms has been fully converted to device tree, so old platform device based init data can be now removed. Signed-off-by:
-
Marek Szyprowski authored
Exynos platform has been fully converted to device tree, so old platform device based init data can be now removed. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Eliminate iommu fault during encoding by adjusting image size used for buffer size computation and ensuring that the buffer is not overrun. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
-
Javier Martinez Canillas authored
The MIPI CSIS DT parse function return an -ENXIO errno if the port # is outside of the supported values. But it doesn't call of_node_put() to decrement the node's reference counter, that's incremented inside the of_graph_get_next_endpoint() function that was called before. Instead of just returning, go to the error path that already does it. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Krzysztof Kozlowski authored
In fimc_md_parse_port_node() remote port parent node is acquired with of_graph_get_remote_port_parent() but it is not put on error path. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by:
-
- 06 Apr, 2016 4 commits
-
-
Mauro Carvalho Chehab authored
If au0828 gets removed, we need to remove the notifiers. Signed-off-by:
-
Max Kellermann authored
We should protect the device unregister patch too, at the error condition. Signed-off-by:
Max Kellermann <max@duempel.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
The uAPI defines it with 64 bits. Let's change the Kernel implementation too. Signed-off-by: -
Mauro Carvalho Chehab authored
The comment is for the wrong function. Fix it. Reviewed-by:
-
- 05 Apr, 2016 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "Some bug fixes on au0828 and snd-usb-audio: - the au0828+snd-usb-audio MC patch broke several things and produced some race conditions. Better to revert the patches, and re-work on them for a next version - fix a regression at tuner disable links logic - properly handle dev_state as a bitmask" * tag 'media/v4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] Revert "[media] media: au0828 change to use Managed Media Controller API" [media] Revert "[media] sound/usb: Use Media Controller API to share media resources" [media] au0828: Fix dev_state handling [media] au0828: fix au0828_v4l2_close() dev_state race condition [media] media: au0828 fix to clear enable/disable/change source handlers [media] v4l2-mc: cleanup a warning [media] au0828: disable tuner links and cache tuner/decoder
-
- 04 Apr, 2016 14 commits
-
-
Linus Torvalds authored
Merge tag 'linux-kselftest-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This update for Kselftest contains seccomp fixes" * tag 'linux-kselftest-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftest/seccomp: Fix the seccomp(2) signature selftest/seccomp: Fix the flag name SECCOMP_FILTER_FLAG_TSYNC
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "This is the first round of MIPS fixes for 4.6: - Fix spelling mistakes all over arch/mips - Provide __bswapsi2 so XZ kernel compression will build with older GCC - ATH79 clock fixes. - Fix clock-rated copy-paste erros in ATH79 DTS. - Fix gisb-arb compatible string for 7435 BMIPS - Enable NAND and UBIFS support in CI20. - Fix BUG() assertion caused by inapropriate smp_processor_id() use. - Fix exception handling issues for the sake of debuggers - Fix the last remaining instance of irq_to_gpio in the db1xxx_ss PCMCIA code - Fix MSA unaligned load failures - Panic if kernel is configured for a not TLB-supported page size - Bail out on unsupported relocs in modules. - Partial fix for Qemu breakage after recent IPI rewrite - Wire up the preadv2 and pwrite2 syscalls - Fix the ar724x clock calculation" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: traps.c: Verify the ISA for microMIPS RDHWR emulation MIPS: BMIPS: Fix gisb-arb compatible string for 7435 MIPS: Bail on unsupported module relocs MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: use "ref" for reference clock name MIPS: ath79: Fix the ar913x reference clock rate MIPS: ath79: Fix the ar724x clock calculation dt-bindings: clock: qca,ath79-pll: fix copy-paste typos MIPS: traps: Correct the SIGTRAP debug ABI in `do_watch' and `do_trap_or_bp' FIRMWARE: Broadcom: Fix grammar of warning messages in bcm47xx_sprom.c. MIPS: ci20: Enable NAND and UBIFS support in defconfig. MIPS: Fix misspellings in comments. MIPS: tlb-r4k: panic if the MMU doesn't support PAGE_SIZE MIPS: zboot: Remove copied source files on clean MIPS: zboot: Fix the build with XZ compression on older GCC versions MIPS: Wire up preadv2 and pwrite2 syscalls. MIPS: cpu_name_string: Use raw_smp_processor_id(). pcmcia: db1xxx_ss: fix last irq_to_gpio user MIPS: Fix MSA ld unaligned failure cases MIPS: Fix broken malta qemu
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from David Vrabel: "Regression and bug fixes for 4.6-rc2: - safely migrate event channels between CPUs - fix CPU hotplug - maintainer changes" * tag 'for-linus-4.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: MAINTAINERS: xen: Konrad to step down and Juergen to pick up xen/events: Mask a moving irq Xen on ARM and ARM64: update MAINTAINERS info xen/x86: Call cpu_startup_entry(CPUHP_AP_ONLINE_IDLE) from xen_play_dead() xen/apic: Provide Xen-specific version of cpu_present_to_apicid APIC op
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull quota fixes from Jan Kara: "Fixes for oopses when the new quotactl gets used with quotas disabled" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ocfs2: Fix Q_GETNEXTQUOTA for filesystem without quotas quota: Handle Q_GETNEXTQUOTA when quota is disabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs fixes from Jaegeuk Kim. * tag 'f2fs-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: retrieve IO write stat from the right place f2fs crypto: fix corrupted symlink in encrypted case f2fs: cover large section in sanity check of super
-
Linus Torvalds authored
In commit e4570897 ("drm/dp-helper: Move the legacy helpers to gma500") the legacy i2c helpers were moved to the only remaining user of them, the gma500 driver. Together with that move, i2c_dp_aux_add_bus() was marked deprecated and started warning about its remaining use. It's now been a year and a half of annoying warning, and apparently nobody cares enough about gma500 to try to move it along to the more modern models. Get rid of the warning - if even the gma500 people don't care enough, then they should certainly not spam other innocent developers with a warning that might hide other, much more real issues. Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge PAGE_CACHE_SIZE removal patches from Kirill Shutemov: "PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. Let's stop pretending that pages in page cache are special. They are not. The first patch with most changes has been done with coccinelle. The second is manual fixups on top. The third patch removes macros definition" [ I was planning to apply this just before rc2, but then I spaced out, so here it is right _after_ rc2 instead. As Kirill suggested as a possibility, I could have decided to only merge the first two patches, and leave the old interfaces for compatibility, but I'd rather get it all done and any out-of-tree modules and patches can trivially do the converstion while still also working with older kernels, so there is little reason to try to maintain the redundant legacy model. - Linus ] * PAGE_CACHE_SIZE-removal: mm: drop PAGE_CACHE_* and page_cache_{get,release} definition mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usage mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros -
Kirill A. Shutemov authored
All users gone. We can remove these macros. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Kirill A. Shutemov authored
Mostly direct substitution with occasional adjustment or removing outdated comments. Signed-off-by:
-
Kirill A. Shutemov authored
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: -
Maciej W. Rozycki authored
Make sure it's the microMIPS rather than MIPS16 ISA before emulating microMIPS RDHWR. Mostly needed as an optimisation for configurations where `cpu_has_mmips' is hardcoded to 0 and also a good measure in case we add further microMIPS instructions to emulate in the future, as the corresponding MIPS16 encoding is ADDIUSP, not supposed to trap. Signed-off-by:
Maciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12282/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Florian Fainelli authored
The SUN GISB arbiter was added with the wrong compatible string, leading to using the wrong register layout, use the correct compatible string for this chip: brcm,bcm7435-gisb-arb. Fixes: 8394968be4c7 ("MIPS: BMIPS: Add BCM7435 dtsi") Signed-off-by:Florian Fainelli <f.fainelli@gmail.com> Cc: blogic@openwrt.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Cc: jaedon.shin@gmail.com Cc: pgynther@google.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12285/Signed-off-by:
-
Konrad Rzeszutek Wilk authored
I've lately been concentrating on other projects and haven't been doing much of Xen core maintainership for the last year. I am quite thrilled that Juergen is willing to help out! P.S. I am still the maintainer of Xen-SWIOTLB, Xen PCI-[front|backend], and co-maintainer of Xen block-[front|backend]; amongst others. Acked-by:
Juergen Gross <jgross@suse.com> Acked-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Boris Ostrovsky authored
Moving an unmasked irq may result in irq handler being invoked on both source and target CPUs. With 2-level this can happen as follows: On source CPU: evtchn_2l_handle_events() -> generic_handle_irq() -> handle_edge_irq() -> eoi_pirq(): irq_move_irq(data); /***** WE ARE HERE *****/ if (VALID_EVTCHN(evtchn)) clear_evtchn(evtchn); If at this moment target processor is handling an unrelated event in evtchn_2l_handle_events()'s loop it may pick up our event since target's cpu_evtchn_mask claims that this event belongs to it *and* the event is unmasked and still pending. At the same time, source CPU will continue executing its own handle_edge_irq(). With FIFO interrupt the scenario is similar: irq_move_irq() may result in a EVTCHNOP_unmask hypercall which, in turn, may make the event pending on the target CPU. We can avoid this situation by moving and clearing the event while keeping event masked. Signed-off-by:
-
- 03 Apr, 2016 9 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc kernel side fixes: - fix event leak - fix AMD PMU driver bug - fix core event handling bug - fix build bug on certain randconfigs Plus misc tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd/ibs: Fix pmu::stop() nesting perf/core: Don't leak event in the syscall error path perf/core: Fix time tracking bug with multiplexing perf jit: genelf makes assumptions about endian perf hists: Fix determination of a callchain node's childlessness perf tools: Add missing initialization of perf_sample.cpumode in synthesized samples perf tools: Fix build break on powerpc perf/x86: Move events_sysfs_show() outside CPU_SUP_INTEL perf bench: Fix detached tarball building due to missing 'perf bench memcpy' headers perf tests: Fix tarpkg build test error output redirection
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core kernel fixes from Ingo Molnar: "This contains the nohz/atomic cleanup/fix for the fetch_or() ugliness you noted during the original nohz pull request, plus there's also misc fixes: - fix liblockdep build bug - fix uapi header build bug - print more lockdep hash collision info to help debug recent reports of hash collisions - update MAINTAINERS email address" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Update my email address locking/lockdep: Print chain_key collision information uapi/linux/stddef.h: Provide __always_inline to userspace headers tools/lib/lockdep: Fix unsupported 'basename -s' in run_tests.sh locking/atomic, sched: Unexport fetch_or() timers/nohz: Convert tick dependency mask to atomic_t locking/atomic: Introduce atomic_fetch_or() -
Linus Torvalds authored
Commit 840f5b05 ("media: au0828 disable tuner to demod link in au0828_media_device_register()") removed all uses of the 'dtv_demod', but left the variable itself around. Remove it. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "This lot contains: - Some fixups for the fallout of the topology consolidation which unearthed AMD/Intel inconsistencies - Documentation for the x86 topology management - Support for AMD advanced power management bits - Two simple cleanups removing duplicated code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add advanced power management bits x86/thread_info: Merge two !__ASSEMBLY__ sections x86/cpufreq: Remove duplicated TDP MSR macro definitions x86/Documentation: Start documenting x86 topology x86/cpu: Get rid of compute_unit_id perf/x86/amd: Cleanup Fam10h NB event constraints x86/topology: Fix AMD core count -
Paul Burton authored
When an unsupported reloc is encountered in a module, we currently blindly branch to whatever would be at its entry in the reloc handler function pointer arrays. This may be NULL, or if the unsupported reloc has a type greater than that of the supported reloc with the highest type then we'll dereference some value after the function pointer array & branch to that. The result is at best a kernel oops. Fix this by checking that the reloc type has an entry in the function pointer array (ie. is less than the number of items in the array) and that the handler is non-NULL, returning an error code to fail the module load if no handler is found. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12432/Signed-off-by:
-
Antony Pavlov authored
Current ath79 clock.c code does not read reference clock and pll setup from devicetree. The ar724x_clocks_init() function recreates the clocks from scratch so devicetree clock information is dropped. After adding the code which picked up reference clock from devicetree I have found that kernel does not boot anymore. The SPI and UART drivers can't get clk; here are the bootlog error messages: of_serial: probe of 18020000.uart failed with error -22 ath79-spi: probe of 1f000000.spi failed with error -22 The problem is that clock code assumes that reference clock name is "ref" but current dts-file uses another name: "oscillator". This patch fixes the problem by changing external oscillator dt node name to "ref". Please note that there is an alternative solution for the problem: > --- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts > +++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts > @@ -16,6 +16,7 @@ > > extosc: oscillator { > compatible = "fixed-clock"; > + clock-output-names = "ref"; > #clock-cells = <0>; > clock-frequency = <40000000>; > }; Signed-off-by:Antony Pavlov <antonynpavlov@gmail.com> Cc: Alban Bedel <albeu@free.fr> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12874/Signed-off-by:
-
Alban Bedel authored
The reference clock on ar913x is at 40MHz and not 5MHz. The current implementation use the wrong reference rate because it doesn't take the PLL divider in account. But if we fix the code to use the divider it becomes identical with the implementation for ar724x, so just drop the broken ar913x implementation. Signed-off-by:
Alban Bedel <albeu@free.fr> Tested-by:
-
Weijie Gao authored
According to the AR7242 datasheet section 2.8, AR724X CPUs use a 40MHz input clock as the REF_CLK instead of 5MHz. The correct CPU PLL calculation procedure is as follows: CPU_PLL = (FB * REF_CLK) / REF_DIV / 2. This patch is compatible with the current calculation procedure with default FB and REF_DIV values. Tested on AR7240, AR7241 and AR7242. Signed-off-by:
Weijie Gao <hackpascal@gmail.com> Signed-off-by: Alban Bedel <albeu@free.fr> (Fixed the commit log message) Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12870/Signed-off-by:
-
