- 05 Apr, 2019 36 commits
-
-
Alexei Avshalom Lazar authored
[ Upstream commit de77a53c ] ies1 or ies2 might be null when code inside _wil_cfg80211_merge_extra_ies access them. Add explicit check for null and make sure ies1/ies2 are not accessed in such a case. spos might be null and be accessed inside _wil_cfg80211_merge_extra_ies. Add explicit check for null in the while condition statement and make sure spos is not accessed in such a case. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Rafael J. Wysocki authored
[ Upstream commit 95c80bc6 ] Dongdong reported a deadlock triggered by a hotplug event during a sysfs "remove" operation: pciehp 0000:00:0c.0:pcie004: Slot(0-1): Link Up # echo 1 > 0000:00:0c.0/remove PME and hotplug share an MSI/MSI-X vector. The sysfs "remove" side is: remove_store pci_stop_and_remove_bus_device_locked pci_lock_rescan_remove pci_stop_and_remove_bus_device ... pcie_pme_remove pcie_pme_suspend synchronize_irq # wait for hotplug IRQ handler pci_unlock_rescan_remove The hotplug side is: pciehp_ist pciehp_handle_presence_or_link_change pciehp_configure_device pci_lock_rescan_remove # wait for pci_unlock_rescan_remove() INFO: task bash:10913 blocked for more than 120 seconds. # ps -ax |grep D PID TTY STAT TIME COMMAND 10913 ttyAMA0 Ds+ 0:00 -bash 14022 ? D 0:00 [irq/745-pciehp] # cat /proc/14022/stack __switch_to+0x94/0xd8 pci_lock_rescan_remove+0x20/0x28 pciehp_configure_device+0x30/0x140 pciehp_handle_presence_or_link_change+0x324/0x458 pciehp_ist+0x1dc/0x1e0 # cat /proc/10913/stack __switch_to+0x94/0xd8 synchronize_irq+0x8c/0xc0 pcie_pme_suspend+0xa4/0x118 pcie_pme_remove+0x20/0x40 pcie_port_remove_service+0x3c/0x58 ... pcie_port_device_remove+0x2c/0x48 pcie_portdrv_remove+0x68/0x78 pci_device_remove+0x48/0x120 ... pci_stop_bus_device+0x84/0xc0 pci_stop_and_remove_bus_device_locked+0x24/0x40 remove_store+0xa4/0xb8 dev_attr_store+0x44/0x60 sysfs_kf_write+0x58/0x80 It is incorrect to call pcie_pme_suspend() from pcie_pme_remove() for two reasons. First, pcie_pme_suspend() calls synchronize_irq(), which will wait for the native hotplug interrupt handler as well as for the PME one, because they share one IRQ (as per the spec). That may deadlock if hotplug is signaled while pcie_pme_remove() is running and the latter calls pci_lock_rescan_remove() before the former. Second, if pcie_pme_suspend() figures out that wakeup needs to be enabled for the port, it will return without disabling the interrupt as expected by pcie_pme_remove() which was overlooked by commit c7b5a4e6 ("PCI / PM: Fix native PME handling during system suspend/resume"). To fix that, rework pcie_pme_remove() to disable the PME interrupt, clear its status and prevent the PME worker function from re-enabling it before calling free_irq() on it, which should be sufficient. Fixes: c7b5a4e6 ("PCI / PM: Fix native PME handling during system suspend/resume") Link: https://lore.kernel.org/linux-pci/c7697e7c-e1af-13e4-8491-0a3996e6ab5d@huawei.comReported-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [bhelgaas: add URL and deadlock details from Dongdong] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Tony Jones authored
[ Upstream commit 7c5b019e ] Fix buffer overflow observed when running perf test. The overflow is when trying to evaluate "1ULL << (64 - 1)" which is resulting in -9223372036854775808 which overflows the 20 character buffer. If is possible this bug has been reported before but I still don't see any fix checked in: See: https://www.spinics.net/lists/linux-perf-users/msg07714.htmlReported-by: Michael Sartain <mikesart@fastmail.com> Reported-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Tony Jones <tonyj@suse.de> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Fixes: f7d82350 ("tools/events: Add files to create libtraceevent.a") Link: http://lkml.kernel.org/r/20190228015532.8941-1-tonyj@suse.deSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Carlos Maiolino authored
[ Upstream commit dce30ca9 ] guard_bio_eod() can truncate a segment in bio to allow it to do IO on odd last sectors of a device. It already checks if the IO starts past EOD, but it does not consider the possibility of an IO request starting within device boundaries can contain more than one segment past EOD. In such cases, truncated_bytes can be bigger than PAGE_SIZE, and will underflow bvec->bv_len. Fix this by checking if truncated_bytes is lower than PAGE_SIZE. This situation has been found on filesystems such as isofs and vfat, which doesn't check the device size before mount, if the device is smaller than the filesystem itself, a readahead on such filesystem, which spans EOD, can trigger this situation, leading a call to zero_user() with a wrong size possibly corrupting memory. I didn't see any crash, or didn't let the system run long enough to check if memory corruption will be hit somewhere, but adding instrumentation to guard_bio_end() to check truncated_bytes size, was enough to see the error. The following script can trigger the error. MNT=/mnt IMG=./DISK.img DEV=/dev/loop0 mkfs.vfat $IMG mount $IMG $MNT cp -R /etc $MNT &> /dev/null umount $MNT losetup -D losetup --find --show --sizelimit 16247280 $IMG mount $DEV $MNT find $MNT -type f -exec cat {} + >/dev/null Kudos to Eric Sandeen for coming up with the reproducer above Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
luojiajun authored
[ Upstream commit 6e876c3d ] In jbd2_journal_commit_transaction(), if we are in abort mode, we may flush the buffer without setting descriptor block checksum by goto start_journal_io. Then fs is mounted, jbd2_descriptor_block_csum_verify() failed. [ 271.379811] EXT4-fs (vdd): shut down requested (2) [ 271.381827] Aborting journal on device vdd-8. [ 271.597136] JBD2: Invalid checksum recovering block 22199 in log [ 271.598023] JBD2: recovery failed [ 271.598484] EXT4-fs (vdd): error loading journal Fix this problem by keep setting descriptor block checksum if the descriptor buffer is not NULL. This checksum problem can be reproduced by xfstests generic/388. Signed-off-by: luojiajun <luojiajun3@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yao Liu authored
[ Upstream commit 68e2672f ] There is a NULL pointer dereference of devname in strspn() The oops looks something like: CIFS: Attempting to mount (null) BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... RIP: 0010:strspn+0x0/0x50 ... Call Trace: ? cifs_parse_mount_options+0x222/0x1710 [cifs] ? cifs_get_volume_info+0x2f/0x80 [cifs] cifs_setup_volume_info+0x20/0x190 [cifs] cifs_get_volume_info+0x50/0x80 [cifs] cifs_smb3_do_mount+0x59/0x630 [cifs] ? ida_alloc_range+0x34b/0x3d0 cifs_do_mount+0x11/0x20 [cifs] mount_fs+0x52/0x170 vfs_kern_mount+0x6b/0x170 do_mount+0x216/0xdc0 ksys_mount+0x83/0xd0 __x64_sys_mount+0x25/0x30 do_syscall_64+0x65/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix this by adding a NULL check on devname in cifs_parse_devname() Signed-off-by: Yao Liu <yotta.liu@ucloud.cn> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jason Cai (Xiang Feng) authored
[ Upstream commit 70de2cbd ] Invoking dm_get_device() twice on the same device path with different modes is dangerous. Because in that case, upgrade_mode() will alloc a new 'dm_dev' and free the old one, which may be referenced by a previous caller. Dereferencing the dangling pointer will trigger kernel NULL pointer dereference. The following two cases can reproduce this issue. Actually, they are invalid setups that must be disallowed, e.g.: 1. Creating a thin-pool with read_only mode, and the same device as both metadata and data. dmsetup create thinp --table \ "0 41943040 thin-pool /dev/vdb /dev/vdb 128 0 1 read_only" BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 ... Call Trace: new_read+0xfb/0x110 [dm_bufio] dm_bm_read_lock+0x43/0x190 [dm_persistent_data] ? kmem_cache_alloc_trace+0x15c/0x1e0 __create_persistent_data_objects+0x65/0x3e0 [dm_thin_pool] dm_pool_metadata_open+0x8c/0xf0 [dm_thin_pool] pool_ctr.cold.79+0x213/0x913 [dm_thin_pool] ? realloc_argv+0x50/0x70 [dm_mod] dm_table_add_target+0x14e/0x330 [dm_mod] table_load+0x122/0x2e0 [dm_mod] ? dev_status+0x40/0x40 [dm_mod] ctl_ioctl+0x1aa/0x3e0 [dm_mod] dm_ctl_ioctl+0xa/0x10 [dm_mod] do_vfs_ioctl+0xa2/0x600 ? handle_mm_fault+0xda/0x200 ? __do_page_fault+0x26c/0x4f0 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x55/0x150 entry_SYSCALL_64_after_hwframe+0x44/0xa9 2. Creating a external snapshot using the same thin-pool device. dmsetup create thinp --table \ "0 41943040 thin-pool /dev/vdc /dev/vdb 128 0 2 ignore_discard" dmsetup message /dev/mapper/thinp 0 "create_thin 0" dmsetup create snap --table \ "0 204800 thin /dev/mapper/thinp 0 /dev/mapper/thinp" BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... Call Trace: ? __alloc_pages_nodemask+0x13c/0x2e0 retrieve_status+0xa5/0x1f0 [dm_mod] ? dm_get_live_or_inactive_table.isra.7+0x20/0x20 [dm_mod] table_status+0x61/0xa0 [dm_mod] ctl_ioctl+0x1aa/0x3e0 [dm_mod] dm_ctl_ioctl+0xa/0x10 [dm_mod] do_vfs_ioctl+0xa2/0x600 ksys_ioctl+0x60/0x90 ? ksys_write+0x4f/0xb0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x55/0x150 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Jason Cai (Xiang Feng) <jason.cai@linux.alibaba.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Louis Taylor authored
[ Upstream commit 259594be ] When compiling with -Wformat, clang emits the following warnings: fs/cifs/smb1ops.c:312:20: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] tgt_total_cnt, total_in_tgt); ^~~~~~~~~~~~ fs/cifs/cifs_dfs_ref.c:289:4: warning: format specifies type 'short' but the argument has type 'int' [-Wformat] ref->flags, ref->server_type); ^~~~~~~~~~ fs/cifs/cifs_dfs_ref.c:289:16: warning: format specifies type 'short' but the argument has type 'int' [-Wformat] ref->flags, ref->server_type); ^~~~~~~~~~~~~~~~ fs/cifs/cifs_dfs_ref.c:291:4: warning: format specifies type 'short' but the argument has type 'int' [-Wformat] ref->ref_flag, ref->path_consumed); ^~~~~~~~~~~~~ fs/cifs/cifs_dfs_ref.c:291:19: warning: format specifies type 'short' but the argument has type 'int' [-Wformat] ref->ref_flag, ref->path_consumed); ^~~~~~~~~~~~~~~~~~ The types of these arguments are unconditionally defined, so this patch updates the format character to the correct ones for ints and unsigned ints. Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by: Louis Taylor <louis@kragniz.eu> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Qian Cai authored
[ Upstream commit 4117992d ] KASAN does not play well with the page poisoning (CONFIG_PAGE_POISONING). It triggers false positives in the allocation path: BUG: KASAN: use-after-free in memchr_inv+0x2ea/0x330 Read of size 8 at addr ffff88881f800000 by task swapper/0 CPU: 0 PID: 0 Comm: swapper Not tainted 5.0.0-rc1+ #54 Call Trace: dump_stack+0xe0/0x19a print_address_description.cold.2+0x9/0x28b kasan_report.cold.3+0x7a/0xb5 __asan_report_load8_noabort+0x19/0x20 memchr_inv+0x2ea/0x330 kernel_poison_pages+0x103/0x3d5 get_page_from_freelist+0x15e7/0x4d90 because KASAN has not yet unpoisoned the shadow page for allocation before it checks memchr_inv() but only found a stale poison pattern. Also, false positives in free path, BUG: KASAN: slab-out-of-bounds in kernel_poison_pages+0x29e/0x3d5 Write of size 4096 at addr ffff8888112cc000 by task swapper/0/1 CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc1+ #55 Call Trace: dump_stack+0xe0/0x19a print_address_description.cold.2+0x9/0x28b kasan_report.cold.3+0x7a/0xb5 check_memory_region+0x22d/0x250 memset+0x28/0x40 kernel_poison_pages+0x29e/0x3d5 __free_pages_ok+0x75f/0x13e0 due to KASAN adds poisoned redzones around slab objects, but the page poisoning needs to poison the whole page. Link: http://lkml.kernel.org/r/20190114233405.67843-1-cai@lca.pwSigned-off-by: Qian Cai <cai@lca.pw> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Shuriyc Chu authored
[ Upstream commit 5704a068 ] (Taken from https://bugzilla.kernel.org/show_bug.cgi?id=200647) 'get_unused_fd_flags' in kthread cause kernel crash. It works fine on 4.1, but causes crash after get 64 fds. It also cause crash on ubuntu1404/1604/1804, centos7.5, and the crash messages are almost the same. The crash message on centos7.5 shows below: start fd 61 start fd 62 start fd 63 BUG: unable to handle kernel NULL pointer dereference at (null) IP: __wake_up_common+0x2e/0x90 PGD 0 Oops: 0000 [#1] SMP Modules linked in: test(OE) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter devlink sunrpc kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd sg ppdev pcspkr virtio_balloon parport_pc parport i2c_piix4 joydev ip_tables xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_generic ata_generic pata_acpi virtio_scsi virtio_console virtio_net cirrus drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm crct10dif_pclmul crct10dif_common crc32c_intel drm ata_piix serio_raw libata virtio_pci virtio_ring i2c_core virtio floppy dm_mirror dm_region_hash dm_log dm_mod CPU: 2 PID: 1820 Comm: test_fd Kdump: loaded Tainted: G OE ------------ 3.10.0-862.3.3.el7.x86_64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 task: ffff8e92b9431fa0 ti: ffff8e94247a0000 task.ti: ffff8e94247a0000 RIP: 0010:__wake_up_common+0x2e/0x90 RSP: 0018:ffff8e94247a2d18 EFLAGS: 00010086 RAX: 0000000000000000 RBX: ffffffff9d09daa0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffffff9d09daa0 RBP: ffff8e94247a2d50 R08: 0000000000000000 R09: ffff8e92b95dfda8 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff9d09daa8 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8e9434e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000017c686000 CR4: 00000000000207e0 Call Trace: __wake_up+0x39/0x50 expand_files+0x131/0x250 __alloc_fd+0x47/0x170 get_unused_fd_flags+0x30/0x40 test_fd+0x12a/0x1c0 [test] kthread+0xd1/0xe0 ret_from_fork_nospec_begin+0x21/0x21 Code: 66 90 55 48 89 e5 41 57 41 89 f7 41 56 41 89 ce 41 55 41 54 49 89 fc 49 83 c4 08 53 48 83 ec 10 48 8b 47 08 89 55 cc 4c 89 45 d0 <48> 8b 08 49 39 c4 48 8d 78 e8 4c 8d 69 e8 75 08 eb 3b 4c 89 ef RIP __wake_up_common+0x2e/0x90 RSP <ffff8e94247a2d18> CR2: 0000000000000000 This issue exists since CentOS 7.5 3.10.0-862 and CentOS 7.4 (3.10.0-693.21.1 ) is ok. Root cause: the item 'resize_wait' is not initialized before being used. Reported-by: Richard Zhang <zhang.zijian@h3c.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sahitya Tummala authored
[ Upstream commit 9083977d ] Fix below warning coming because of using mutex lock in atomic context. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:98 in_atomic(): 1, irqs_disabled(): 0, pid: 585, name: sh Preemption disabled at: __radix_tree_preload+0x28/0x130 Call trace: dump_backtrace+0x0/0x2b4 show_stack+0x20/0x28 dump_stack+0xa8/0xe0 ___might_sleep+0x144/0x194 __might_sleep+0x58/0x8c mutex_lock+0x2c/0x48 f2fs_trace_pid+0x88/0x14c f2fs_set_node_page_dirty+0xd0/0x184 Do not use f2fs_radix_tree_insert() to avoid doing cond_resched() with spin_lock() acquired. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jia Guo authored
[ Upstream commit cc725ef3 ] In the process of creating a node, it will cause NULL pointer dereference in kernel if o2cb_ctl failed in the interval (mkdir, o2cb_set_node_attribute(node_num)] in function o2cb_add_node. The node num is initialized to 0 in function o2nm_node_group_make_item, o2nm_node_group_drop_item will mistake the node number 0 for a valid node number when we delete the node before the node number is set correctly. If the local node number of the current host happens to be 0, cluster->cl_local_node will be set to O2NM_INVALID_NODE_NUM while o2hb_thread still running. The panic stack is generated as follows: o2hb_thread \-o2hb_do_disk_heartbeat \-o2hb_check_own_slot |-slot = ®->hr_slots[o2nm_this_node()]; //o2nm_this_node() return O2NM_INVALID_NODE_NUM We need to check whether the node number is set when we delete the node. Link: http://lkml.kernel.org/r/133d8045-72cc-863e-8eae-5013f9f6bc51@huawei.comSigned-off-by: Jia Guo <guojia12@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Acked-by: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Qian Cai authored
[ Upstream commit 92d1d07d ] Kmemleak throws endless warnings during boot due to in __alloc_alien_cache(), alc = kmalloc_node(memsize, gfp, node); init_arraycache(&alc->ac, entries, batch); kmemleak_no_scan(ac); Kmemleak does not track the array cache (alc->ac) but the alien cache (alc) instead, so let it track the latter by lifting kmemleak_no_scan() out of init_arraycache(). There is another place that calls init_arraycache(), but alloc_kmem_cache_cpus() uses the percpu allocation where will never be considered as a leak. kmemleak: Found object by alias at 0xffff8007b9aa7e38 CPU: 190 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2+ #2 Call trace: dump_backtrace+0x0/0x168 show_stack+0x24/0x30 dump_stack+0x88/0xb0 lookup_object+0x84/0xac find_and_get_object+0x84/0xe4 kmemleak_no_scan+0x74/0xf4 setup_kmem_cache_node+0x2b4/0x35c __do_tune_cpucache+0x250/0x2d4 do_tune_cpucache+0x4c/0xe4 enable_cpucache+0xc8/0x110 setup_cpu_cache+0x40/0x1b8 __kmem_cache_create+0x240/0x358 create_cache+0xc0/0x198 kmem_cache_create_usercopy+0x158/0x20c kmem_cache_create+0x50/0x64 fsnotify_init+0x58/0x6c do_one_initcall+0x194/0x388 kernel_init_freeable+0x668/0x688 kernel_init+0x18/0x124 ret_from_fork+0x10/0x18 kmemleak: Object 0xffff8007b9aa7e00 (size 256): kmemleak: comm "swapper/0", pid 1, jiffies 4294697137 kmemleak: min_count = 1 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: kmemleak_alloc+0x84/0xb8 kmem_cache_alloc_node_trace+0x31c/0x3a0 __kmalloc_node+0x58/0x78 setup_kmem_cache_node+0x26c/0x35c __do_tune_cpucache+0x250/0x2d4 do_tune_cpucache+0x4c/0xe4 enable_cpucache+0xc8/0x110 setup_cpu_cache+0x40/0x1b8 __kmem_cache_create+0x240/0x358 create_cache+0xc0/0x198 kmem_cache_create_usercopy+0x158/0x20c kmem_cache_create+0x50/0x64 fsnotify_init+0x58/0x6c do_one_initcall+0x194/0x388 kernel_init_freeable+0x668/0x688 kernel_init+0x18/0x124 kmemleak: Not scanning unknown object at 0xffff8007b9aa7e38 CPU: 190 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2+ #2 Call trace: dump_backtrace+0x0/0x168 show_stack+0x24/0x30 dump_stack+0x88/0xb0 kmemleak_no_scan+0x90/0xf4 setup_kmem_cache_node+0x2b4/0x35c __do_tune_cpucache+0x250/0x2d4 do_tune_cpucache+0x4c/0xe4 enable_cpucache+0xc8/0x110 setup_cpu_cache+0x40/0x1b8 __kmem_cache_create+0x240/0x358 create_cache+0xc0/0x198 kmem_cache_create_usercopy+0x158/0x20c kmem_cache_create+0x50/0x64 fsnotify_init+0x58/0x6c do_one_initcall+0x194/0x388 kernel_init_freeable+0x668/0x688 kernel_init+0x18/0x124 ret_from_fork+0x10/0x18 Link: http://lkml.kernel.org/r/20190129184518.39808-1-cai@lca.pw Fixes: 1fe00d50 ("slab: factor out initialization of array cache") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Uladzislau Rezki (Sony) authored
[ Upstream commit afd07389 ] One of the vmalloc stress test case triggers the kernel BUG(): <snip> [60.562151] ------------[ cut here ]------------ [60.562154] kernel BUG at mm/vmalloc.c:512! [60.562206] invalid opcode: 0000 [#1] PREEMPT SMP PTI [60.562247] CPU: 0 PID: 430 Comm: vmalloc_test/0 Not tainted 4.20.0+ #161 [60.562293] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [60.562351] RIP: 0010:alloc_vmap_area+0x36f/0x390 <snip> it can happen due to big align request resulting in overflowing of calculated address, i.e. it becomes 0 after ALIGN()'s fixup. Fix it by checking if calculated address is within vstart/vend range. Link: http://lkml.kernel.org/r/20190124115648.9433-2-urezki@gmail.comSigned-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joel Fernandes <joelaf@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vlastimil Babka authored
[ Upstream commit 2e25644e ] Syzbot with KMSAN reports (excerpt): ================================================================== BUG: KMSAN: uninit-value in mpol_rebind_policy mm/mempolicy.c:353 [inline] BUG: KMSAN: uninit-value in mpol_rebind_mm+0x249/0x370 mm/mempolicy.c:384 CPU: 1 PID: 17420 Comm: syz-executor4 Not tainted 4.20.0-rc7+ #15 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:295 mpol_rebind_policy mm/mempolicy.c:353 [inline] mpol_rebind_mm+0x249/0x370 mm/mempolicy.c:384 update_tasks_nodemask+0x608/0xca0 kernel/cgroup/cpuset.c:1120 update_nodemasks_hier kernel/cgroup/cpuset.c:1185 [inline] update_nodemask kernel/cgroup/cpuset.c:1253 [inline] cpuset_write_resmask+0x2a98/0x34b0 kernel/cgroup/cpuset.c:1728 ... Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline] kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176 kmem_cache_alloc+0x572/0xb90 mm/slub.c:2777 mpol_new mm/mempolicy.c:276 [inline] do_mbind mm/mempolicy.c:1180 [inline] kernel_mbind+0x8a7/0x31a0 mm/mempolicy.c:1347 __do_sys_mbind mm/mempolicy.c:1354 [inline] As it's difficult to report where exactly the uninit value resides in the mempolicy object, we have to guess a bit. mm/mempolicy.c:353 contains this part of mpol_rebind_policy(): if (!mpol_store_user_nodemask(pol) && nodes_equal(pol->w.cpuset_mems_allowed, *newmask)) "mpol_store_user_nodemask(pol)" is testing pol->flags, which I couldn't ever see being uninitialized after leaving mpol_new(). So I'll guess it's actually about accessing pol->w.cpuset_mems_allowed on line 354, but still part of statement starting on line 353. For w.cpuset_mems_allowed to be not initialized, and the nodes_equal() reachable for a mempolicy where mpol_set_nodemask() is called in do_mbind(), it seems the only possibility is a MPOL_PREFERRED policy with empty set of nodes, i.e. MPOL_LOCAL equivalent, with MPOL_F_LOCAL flag. Let's exclude such policies from the nodes_equal() check. Note the uninit access should be benign anyway, as rebinding this kind of policy is always a no-op. Therefore no actual need for stable inclusion. Link: http://lkml.kernel.org/r/a71997c3-e8ae-a787-d5ce-3db05768b27c@suse.cz Link: http://lkml.kernel.org/r/73da3e9c-cc84-509e-17d9-0c434bb9967d@suse.czSigned-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: syzbot+b19c2dc2c990ea657a71@syzkaller.appspotmail.com Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Cc: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Qian Cai authored
[ Upstream commit 0c815854 ] After offlining a memory block, kmemleak scan will trigger a crash, as it encounters a page ext address that has already been freed during memory offlining. At the beginning in alloc_page_ext(), it calls kmemleak_alloc(), but it does not call kmemleak_free() in free_page_ext(). BUG: unable to handle kernel paging request at ffff888453d00000 PGD 128a01067 P4D 128a01067 PUD 128a04067 PMD 47e09e067 PTE 800ffffbac2ff060 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 1 PID: 1594 Comm: bash Not tainted 5.0.0-rc8+ #15 Hardware name: HP ProLiant DL180 Gen9/ProLiant DL180 Gen9, BIOS U20 10/25/2017 RIP: 0010:scan_block+0xb5/0x290 Code: 85 6e 01 00 00 48 b8 00 00 30 f5 81 88 ff ff 48 39 c3 0f 84 5b 01 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 0f 85 87 01 00 00 <4c> 8b 3b e8 f3 0c fa ff 4c 39 3d 0c 6b 4c 01 0f 87 08 01 00 00 4c RSP: 0018:ffff8881ec57f8e0 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffff888453d00000 RCX: ffffffffa61e5a54 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff888453d00000 RBP: ffff8881ec57f920 R08: fffffbfff4ed588d R09: fffffbfff4ed588c R10: fffffbfff4ed588c R11: ffffffffa76ac463 R12: dffffc0000000000 R13: ffff888453d00ff9 R14: ffff8881f80cef48 R15: ffff8881f80cef48 FS: 00007f6c0e3f8740(0000) GS:ffff8881f7680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff888453d00000 CR3: 00000001c4244003 CR4: 00000000001606a0 Call Trace: scan_gray_list+0x269/0x430 kmemleak_scan+0x5a8/0x10f0 kmemleak_write+0x541/0x6ca full_proxy_write+0xf8/0x190 __vfs_write+0xeb/0x980 vfs_write+0x15a/0x4f0 ksys_write+0xd2/0x1b0 __x64_sys_write+0x73/0xb0 do_syscall_64+0xeb/0xaaa entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f6c0dad73b8 Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 63 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55 RSP: 002b:00007ffd5b863cb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007f6c0dad73b8 RDX: 0000000000000005 RSI: 000055a9216e1710 RDI: 0000000000000001 RBP: 000055a9216e1710 R08: 000000000000000a R09: 00007ffd5b863840 R10: 000000000000000a R11: 0000000000000246 R12: 00007f6c0dda9780 R13: 0000000000000005 R14: 00007f6c0dda4740 R15: 0000000000000005 Modules linked in: nls_iso8859_1 nls_cp437 vfat fat kvm_intel kvm irqbypass efivars ip_tables x_tables xfs sd_mod ahci libahci igb i2c_algo_bit libata i2c_core dm_mirror dm_region_hash dm_log dm_mod efivarfs CR2: ffff888453d00000 ---[ end trace ccf646c7456717c5 ]--- Kernel panic - not syncing: Fatal exception Shutting down cpus with NMI Kernel Offset: 0x24c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- Link: http://lkml.kernel.org/r/20190227173147.75650-1-cai@lca.pwSigned-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Peng Fan authored
[ Upstream commit 0d3bd18a ] In case cma_init_reserved_mem failed, need to free the memblock allocated by memblock_reserve or memblock_alloc_range. Quote Catalin's comments: https://lkml.org/lkml/2019/2/26/482 Kmemleak is supposed to work with the memblock_{alloc,free} pair and it ignores the memblock_reserve() as a memblock_alloc() implementation detail. It is, however, tolerant to memblock_free() being called on a sub-range or just a different range from a previous memblock_alloc(). So the original patch looks fine to me. FWIW: Link: http://lkml.kernel.org/r/20190227144631.16708-1-peng.fan@nxp.comSigned-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jiri Olsa authored
[ Upstream commit e34c9402 ] Ravi Bangoria reported that we fail with an empty NUMA node with the following message: $ lscpu NUMA node0 CPU(s): NUMA node1 CPU(s): 0-4 $ sudo ./perf c2c report node/cpu topology bugFailed setup nodes Fix this by detecting the empty node and keeping its CPU set empty. Reported-by: Nageswara R Sastry <nasastry@in.ibm.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190305152536.21035-2-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Linus Torvalds authored
[ Upstream commit e0f0ae83 ] The pm8xxx_get_channel() implementation is unclear, and causes gcc to suddenly generate odd warnings. The trigger for the warning (at least for me) was the entirely unrelated commit 79a4e91d ("device.h: Add __cold to dev_<level> logging functions"), which apparently changes gcc code generation in the caller function enough to cause this: drivers/iio/adc/qcom-pm8xxx-xoadc.c: In function ‘pm8xxx_xoadc_probe’: drivers/iio/adc/qcom-pm8xxx-xoadc.c:633:8: warning: ‘ch’ may be used uninitialized in this function [-Wmaybe-uninitialized] ret = pm8xxx_read_channel_rsv(adc, ch, AMUX_RSV4, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ &read_nomux_rsv4, true); ~~~~~~~~~~~~~~~~~~~~~~~ drivers/iio/adc/qcom-pm8xxx-xoadc.c:426:27: note: ‘ch’ was declared here struct pm8xxx_chan_info *ch; ^~ because gcc for some reason then isn't able to see that the termination condition for the "for( )" loop in that function is also the condition for returning NULL. So it's not _actually_ uninitialized, but the function is admittedly just unnecessarily oddly written. Simplify and clarify the function, making gcc also see that it always returns a valid initialized value. Cc: Joe Perches <joe@perches.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
John Garry authored
[ Upstream commit efdcad62 ] When the PHY comes down, we currently do not set the negotiated linkrate: root@(none)$ pwd /sys/class/sas_phy/phy-0:0 root@(none)$ more enable 1 root@(none)$ more negotiated_linkrate 12.0 Gbit root@(none)$ echo 0 > enable root@(none)$ more negotiated_linkrate 12.0 Gbit root@(none)$ This patch fixes the driver code to set it properly when the PHY comes down. If the PHY had been enabled, then set unknown; otherwise, flag as disabled. The logical place to set the negotiated linkrate for this scenario is PHY down routine, which is called from the PHY down ISR. However, it is not possible to know if the PHY comes down due to PHY disable or loss of link, as sas_phy.enabled member is not set until after the transport disable routine is complete, which races with the PHY down ISR. As an imperfect solution, use sas_phy_data.enable as the flag to know if the PHY is down due to disable. It's imperfect, as sas_phy_data is internal to libsas. I can't see another way without adding a new field to hisi_sas_phy and managing it, or changing SCSI SAS transport. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Arnd Bergmann authored
[ Upstream commit 43d28166 ] The enic driver relies on the CONFIG_CPUMASK_OFFSTACK feature to dynamically allocate a struct member, but this is normally intended for local variables. Building with clang, I get a warning for a few locations that check the address of the cpumask_var_t: drivers/net/ethernet/cisco/enic/enic_main.c:122:22: error: address of array 'enic->msix[i].affinity_mask' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion] As far as I can tell, the code is still correct, as the truth value of the pointer is what we need in this configuration. To get rid of the warning, use cpumask_available() instead of checking the pointer directly. Fixes: 322cf7e3 ("enic: assign affinity hint to interrupts") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Christian Brauner authored
[ Upstream commit 32a5ad9c ] Currently, when writing echo 18446744073709551616 > /proc/sys/fs/file-max /proc/sys/fs/file-max will overflow and be set to 0. That quickly crashes the system. This commit sets the max and min value for file-max. The max value is set to long int. Any higher value cannot currently be used as the percpu counters are long ints and not unsigned integers. Note that the file-max value is ultimately parsed via __do_proc_doulongvec_minmax(). This function does not report error when min or max are exceeded. Which means if a value largen that long int is written userspace will not receive an error instead the old value will be kept. There is an argument to be made that this should be changed and __do_proc_doulongvec_minmax() should return an error when a dedicated min or max value are exceeded. However this has the potential to break userspace so let's defer this to an RFC patch. Link: http://lkml.kernel.org/r/20190107222700.15954-3-christian@brauner.ioSigned-off-by: Christian Brauner <christian@brauner.io> Acked-by: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Waiman Long <longman@redhat.com> [christian@brauner.io: v4] Link: http://lkml.kernel.org/r/20190210203943.8227-3-christian@brauner.ioSigned-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Luc Van Oostenryck authored
[ Upstream commit 62461ac2 ] The percpu member of this structure is declared as: struct ... ** __percpu member; So its type is: __percpu pointer to pointer to struct ... But looking at how it's used, its type should be: pointer to __percpu pointer to struct ... and it should thus be declared as: struct ... * __percpu *member; So fix the placement of '__percpu' in the definition of this structures. This silents a few Sparse's warnings like: warning: incorrect type in initializer (different address spaces) expected void const [noderef] <asn:3> *__vpp_verify got struct sched_domain ** Link: http://lkml.kernel.org/r/20190118144902.79065-1-luc.vanoostenryck@gmail.com Fixes: 017c59c0 ("relay: Use per CPU constructs for the relay channel buffer pointers") Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Jens Axboe <axboe@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Russell King authored
[ Upstream commit d01849f7 ] Tony notes that the GPIO module does not idle when level interrupts are in use, as the wakeup appears to get stuck. After extensive investigation, it appears that the wakeup will only be cleared if the interrupt status register is cleared while the interrupt is enabled. However, we are currently clearing it with the interrupt disabled for level-based interrupts. It is acknowledged that this observed behaviour conflicts with a statement in the TRM: CAUTION After servicing the interrupt, the status bit in the interrupt status register (GPIOi.GPIO_IRQSTATUS_0 or GPIOi.GPIO_IRQSTATUS_1) must be reset and the interrupt line released (by setting the corresponding bit of the interrupt status register to 1) before enabling an interrupt for the GPIO channel in the interrupt-enable register (GPIOi.GPIO_IRQSTATUS_SET_0 or GPIOi.GPIO_IRQSTATUS_SET_1) to prevent the occurrence of unexpected interrupts when enabling an interrupt for the GPIO channel. However, this does not appear to be a practical problem. Further, as reported by Grygorii Strashko <grygorii.strashko@ti.com>, the TI Android kernel tree has an earlier similar patch as "GPIO: OMAP: Fix the sequence to clear the IRQ status" saying: if the status is cleared after disabling the IRQ then sWAKEUP will not be cleared and gates the module transition When we unmask the level interrupt after the interrupt has been handled, enable the interrupt and only then clear the interrupt. If the interrupt is still pending, the hardware will re-assert the interrupt status. Should the caution note in the TRM prove to be a problem, we could use a clear-enable-clear sequence instead. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [tony@atomide.com: updated comments based on an earlier TI patch] Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Tonghao Zhang authored
[ Upstream commit 6e77c413 ] If we try to set VFs mac address on a VF (not PF) net device, the kernel will be crash. The commands are show as below: $ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs $ ip link set $MLX_VF0 vf 0 mac 00:11:22:33:44:00 [exception RIP: mlx5_eswitch_set_vport_mac+41] [ffffb8b7079e3688] do_setlink at ffffffff8f67f85b [ffffb8b7079e37a8] __rtnl_newlink at ffffffff8f683778 [ffffb8b7079e3b68] rtnl_newlink at ffffffff8f683a63 [ffffb8b7079e3b90] rtnetlink_rcv_msg at ffffffff8f67d812 [ffffb8b7079e3c10] netlink_rcv_skb at ffffffff8f6b88ab [ffffb8b7079e3c60] netlink_unicast at ffffffff8f6b808f [ffffb8b7079e3ca0] netlink_sendmsg at ffffffff8f6b8412 [ffffb8b7079e3d18] sock_sendmsg at ffffffff8f6452f6 [ffffb8b7079e3d30] ___sys_sendmsg at ffffffff8f645860 [ffffb8b7079e3eb0] __sys_sendmsg at ffffffff8f647a38 [ffffb8b7079e3f38] do_syscall_64 at ffffffff8f00401b [ffffb8b7079e3f50] entry_SYSCALL_64_after_hwframe at ffffffff8f80008c and [exception RIP: mlx5_eswitch_get_vport_config+12] [ffffa70607e57678] mlx5e_get_vf_config at ffffffffc03c7f8f [mlx5_core] [ffffa70607e57688] do_setlink at ffffffffbc67fa59 [ffffa70607e577a8] __rtnl_newlink at ffffffffbc683778 [ffffa70607e57b68] rtnl_newlink at ffffffffbc683a63 [ffffa70607e57b90] rtnetlink_rcv_msg at ffffffffbc67d812 [ffffa70607e57c10] netlink_rcv_skb at ffffffffbc6b88ab [ffffa70607e57c60] netlink_unicast at ffffffffbc6b808f [ffffa70607e57ca0] netlink_sendmsg at ffffffffbc6b8412 [ffffa70607e57d18] sock_sendmsg at ffffffffbc6452f6 [ffffa70607e57d30] ___sys_sendmsg at ffffffffbc645860 [ffffa70607e57eb0] __sys_sendmsg at ffffffffbc647a38 [ffffa70607e57f38] do_syscall_64 at ffffffffbc00401b [ffffa70607e57f50] entry_SYSCALL_64_after_hwframe at ffffffffbc80008c Fixes: a8d70a05 ("net/mlx5: E-Switch, Disallow vlan/spoofcheck setup if not being esw manager") Cc: Eli Cohen <eli@mellanox.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Tonghao Zhang authored
[ Upstream commit 24319258 ] If we try to set VFs rate on a VF (not PF) net device, the kernel will be crash. The commands are show as below: $ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs $ ip link set $MLX_VF0 vf 0 max_tx_rate 2 min_tx_rate 1 If not applied the first patch ("net/mlx5: Avoid panic when setting vport mac, getting vport config"), the command: $ ip link set $MLX_VF0 vf 0 rate 100 can also crash the kernel. [ 1650.006388] RIP: 0010:mlx5_eswitch_set_vport_rate+0x1f/0x260 [mlx5_core] [ 1650.007092] do_setlink+0x982/0xd20 [ 1650.007129] __rtnl_newlink+0x528/0x7d0 [ 1650.007374] rtnl_newlink+0x43/0x60 [ 1650.007407] rtnetlink_rcv_msg+0x2a2/0x320 [ 1650.007484] netlink_rcv_skb+0xcb/0x100 [ 1650.007519] netlink_unicast+0x17f/0x230 [ 1650.007554] netlink_sendmsg+0x2d2/0x3d0 [ 1650.007592] sock_sendmsg+0x36/0x50 [ 1650.007625] ___sys_sendmsg+0x280/0x2a0 [ 1650.007963] __sys_sendmsg+0x58/0xa0 [ 1650.007998] do_syscall_64+0x5b/0x180 [ 1650.009438] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c9497c98 ("net/mlx5: Add support for setting VF min rate") Cc: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Douglas Anderson authored
[ Upstream commit 31b265b3 ] As reported back in 2016-11 [1], the "ftdump" kdb command triggers a BUG for "sleeping function called from invalid context". kdb's "ftdump" command wants to call ring_buffer_read_prepare() in atomic context. A very simple solution for this is to add allocation flags to ring_buffer_read_prepare() so kdb can call it without triggering the allocation error. This patch does that. Note that in the original email thread about this, it was suggested that perhaps the solution for kdb was to either preallocate the buffer ahead of time or create our own iterator. I'm hoping that this alternative of adding allocation flags to ring_buffer_read_prepare() can be considered since it means I don't need to duplicate more of the core trace code into "trace_kdb.c" (for either creating my own iterator or re-preparing a ring allocator whose memory was already allocated). NOTE: another option for kdb is to actually figure out how to make it reuse the existing ftrace_dump() function and totally eliminate the duplication. This sounds very appealing and actually works (the "sr z" command can be seen to properly dump the ftrace buffer). The downside here is that ftrace_dump() fully consumes the trace buffer. Unless that is changed I'd rather not use it because it means "ftdump | grep xyz" won't be very useful to search the ftrace buffer since it will throw away the whole trace on the first grep. A future patch to dump only the last few lines of the buffer will also be hard to implement. [1] https://lkml.kernel.org/r/20161117191605.GA21459@google.com Link: http://lkml.kernel.org/r/20190308193205.213659-1-dianders@chromium.orgReported-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chao Yu authored
[ Upstream commit aadcef64 ] As Jiqun Li reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202883 sometimes, dead lock when make system call SYS_getdents64 with fsync() is called by another process. monkey running on android9.0 1. task 9785 held sbi->cp_rwsem and waiting lock_page() 2. task 10349 held mm_sem and waiting sbi->cp_rwsem 3. task 9709 held lock_page() and waiting mm_sem so this is a dead lock scenario. task stack is show by crash tools as following crash_arm64> bt ffffffc03c354080 PID: 9785 TASK: ffffffc03c354080 CPU: 1 COMMAND: "RxIoScheduler-3" >> #7 [ffffffc01b50fac0] __lock_page at ffffff80081b11e8 crash-arm64> bt 10349 PID: 10349 TASK: ffffffc018b83080 CPU: 1 COMMAND: "BUGLY_ASYNC_UPL" >> #3 [ffffffc01f8cfa40] rwsem_down_read_failed at ffffff8008a93afc PC: 00000033 LR: 00000000 SP: 00000000 PSTATE: ffffffffffffffff crash-arm64> bt 9709 PID: 9709 TASK: ffffffc03e7f3080 CPU: 1 COMMAND: "IntentService[A" >> #3 [ffffffc001e67850] rwsem_down_read_failed at ffffff8008a93afc >> #8 [ffffffc001e67b80] el1_ia at ffffff8008084fc4 PC: ffffff8008274114 [compat_filldir64+120] LR: ffffff80083584d4 [f2fs_fill_dentries+448] SP: ffffffc001e67b80 PSTATE: 80400145 X29: ffffffc001e67b80 X28: 0000000000000000 X27: 000000000000001a X26: 00000000000093d7 X25: ffffffc070d52480 X24: 0000000000000008 X23: 0000000000000028 X22: 00000000d43dfd60 X21: ffffffc001e67e90 X20: 0000000000000011 X19: ffffff80093a4000 X18: 0000000000000000 X17: 0000000000000000 X16: 0000000000000000 X15: 0000000000000000 X14: ffffffffffffffff X13: 0000000000000008 X12: 0101010101010101 X11: 7f7f7f7f7f7f7f7f X10: 6a6a6a6a6a6a6a6a X9: 7f7f7f7f7f7f7f7f X8: 0000000080808000 X7: ffffff800827409c X6: 0000000080808000 X5: 0000000000000008 X4: 00000000000093d7 X3: 000000000000001a X2: 0000000000000011 X1: ffffffc070d52480 X0: 0000000000800238 >> #9 [ffffffc001e67be0] f2fs_fill_dentries at ffffff80083584d0 PC: 0000003c LR: 00000000 SP: 00000000 PSTATE: 000000d9 X12: f48a02ff X11: d4678960 X10: d43dfc00 X9: d4678ae4 X8: 00000058 X7: d4678994 X6: d43de800 X5: 000000d9 X4: d43dfc0c X3: d43dfc10 X2: d46799c8 X1: 00000000 X0: 00001068 Below potential deadlock will happen between three threads: Thread A Thread B Thread C - f2fs_do_sync_file - f2fs_write_checkpoint - down_write(&sbi->node_change) -- 1) - do_page_fault - down_write(&mm->mmap_sem) -- 2) - do_wp_page - f2fs_vm_page_mkwrite - getdents64 - f2fs_read_inline_dir - lock_page -- 3) - f2fs_sync_node_pages - lock_page -- 3) - __do_map_lock - down_read(&sbi->node_change) -- 1) - f2fs_fill_dentries - dir_emit - compat_filldir64 - do_page_fault - down_read(&mm->mmap_sem) -- 2) Since f2fs_readdir is protected by inode.i_rwsem, there should not be any updates in inode page, we're safe to lookup dents in inode page without its lock held, so taking off the lock to improve concurrency of readdir and avoid potential deadlock. Reported-by: Jiqun Li <jiqun.li@unisoc.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Masahiro Yamada authored
[ Upstream commit fc2b47b5 ] It believe it is a bad idea to hardcode a specific compiler prefix that may or may not be installed on a user's system. It is annoying when testing features that should not require compilers at all. For example, mrproper, headers_install, etc. should work without any compiler. They look like follows on my machine. $ make ARCH=h8300 mrproper ./scripts/gcc-version.sh: line 26: h8300-unknown-linux-gcc: command not found ./scripts/gcc-version.sh: line 27: h8300-unknown-linux-gcc: command not found make: h8300-unknown-linux-gcc: Command not found make: h8300-unknown-linux-gcc: Command not found [ a bunch of the same error messages continue ] $ make ARCH=h8300 headers_install ./scripts/gcc-version.sh: line 26: h8300-unknown-linux-gcc: command not found ./scripts/gcc-version.sh: line 27: h8300-unknown-linux-gcc: command not found make: h8300-unknown-linux-gcc: Command not found HOSTCC scripts/basic/fixdep make: h8300-unknown-linux-gcc: Command not found WRAP arch/h8300/include/generated/uapi/asm/kvm_para.h [ snip ] The solution is to delete this line, or to use cc-cross-prefix like some architectures do. I chose the latter as a moderate fixup. I added an alternative 'h8300-linux-' because it is available at: https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Aurelien Aptel authored
[ Upstream commit bc31d0cd ] We have a customer reporting crashes in lock_get_status() with many "Leaked POSIX lock" messages preceeding the crash. Leaked POSIX lock on dev=0x0:0x56 ... Leaked POSIX lock on dev=0x0:0x56 ... Leaked POSIX lock on dev=0x0:0x56 ... Leaked POSIX lock on dev=0x0:0x53 ... Leaked POSIX lock on dev=0x0:0x53 ... Leaked POSIX lock on dev=0x0:0x53 ... Leaked POSIX lock on dev=0x0:0x53 ... POSIX: fl_owner=ffff8900e7b79380 fl_flags=0x1 fl_type=0x1 fl_pid=20709 Leaked POSIX lock on dev=0x0:0x4b ino... Leaked locks on dev=0x0:0x4b ino=0xf911400000029: POSIX: fl_owner=ffff89f41c870e00 fl_flags=0x1 fl_type=0x1 fl_pid=19592 stack segment: 0000 [#1] SMP Modules linked in: binfmt_misc msr tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag rpcsec_gss_krb5 arc4 ecb auth_rpcgss nfsv4 md4 nfs nls_utf8 lockd grace cifs sunrpc ccm dns_resolver fscache af_packet iscsi_ibft iscsi_boot_sysfs vmw_vsock_vmci_transport vsock xfs libcrc32c sb_edac edac_core crct10dif_pclmul crc32_pclmul ghash_clmulni_intel drbg ansi_cprng vmw_balloon aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd joydev pcspkr vmxnet3 i2c_piix4 vmw_vmci shpchp fjes processor button ac btrfs xor raid6_pq sr_mod cdrom ata_generic sd_mod ata_piix vmwgfx crc32c_intel drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm serio_raw ahci libahci drm libata vmw_pvscsi sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4 Supported: Yes CPU: 6 PID: 28250 Comm: lsof Not tainted 4.4.156-94.64-default #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016 task: ffff88a345f28740 ti: ffff88c74005c000 task.ti: ffff88c74005c000 RIP: 0010:[<ffffffff8125dcab>] [<ffffffff8125dcab>] lock_get_status+0x9b/0x3b0 RSP: 0018:ffff88c74005fd90 EFLAGS: 00010202 RAX: ffff89bde83e20ae RBX: ffff89e870003d18 RCX: 0000000049534f50 RDX: ffffffff81a3541f RSI: ffffffff81a3544e RDI: ffff89bde83e20ae RBP: 0026252423222120 R08: 0000000020584953 R09: 000000000000ffff R10: 0000000000000000 R11: ffff88c74005fc70 R12: ffff89e5ca7b1340 R13: 00000000000050e5 R14: ffff89e870003d30 R15: ffff89e5ca7b1340 FS: 00007fafd64be800(0000) GS:ffff89f41fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000001c80018 CR3: 000000a522048000 CR4: 0000000000360670 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: 0000000000000208 ffffffff81a3d6b6 ffff89e870003d30 ffff89e870003d18 ffff89e5ca7b1340 ffff89f41738d7c0 ffff89e870003d30 ffff89e5ca7b1340 ffffffff8125e08f 0000000000000000 ffff89bc22b67d00 ffff88c74005ff28 Call Trace: [<ffffffff8125e08f>] locks_show+0x2f/0x70 [<ffffffff81230ad1>] seq_read+0x251/0x3a0 [<ffffffff81275bbc>] proc_reg_read+0x3c/0x70 [<ffffffff8120e456>] __vfs_read+0x26/0x140 [<ffffffff8120e9da>] vfs_read+0x7a/0x120 [<ffffffff8120faf2>] SyS_read+0x42/0xa0 [<ffffffff8161cbc3>] entry_SYSCALL_64_fastpath+0x1e/0xb7 When Linux closes a FD (close(), close-on-exec, dup2(), ...) it calls filp_close() which also removes all posix locks. The lock struct is initialized like so in filp_close() and passed down to cifs ... lock.fl_type = F_UNLCK; lock.fl_flags = FL_POSIX | FL_CLOSE; lock.fl_start = 0; lock.fl_end = OFFSET_MAX; ... Note the FL_CLOSE flag, which hints the VFS code that this unlocking is done for closing the fd. filp_close() locks_remove_posix(filp, id); vfs_lock_file(filp, F_SETLK, &lock, NULL); return filp->f_op->lock(filp, cmd, fl) => cifs_lock() rc = cifs_setlk(file, flock, type, wait_flag, posix_lck, lock, unlock, xid); rc = server->ops->mand_unlock_range(cfile, flock, xid); if (flock->fl_flags & FL_POSIX && !rc) rc = locks_lock_file_wait(file, flock) Notice how we don't call locks_lock_file_wait() which does the generic VFS lock/unlock/wait work on the inode if rc != 0. If we are closing the handle, the SMB server is supposed to remove any locks associated with it. Similarly, cifs.ko frees and wakes up any lock and lock waiter when closing the file: cifs_close() cifsFileInfo_put(file->private_data) /* * Delete any outstanding lock records. We'll lose them when the file * is closed anyway. */ down_write(&cifsi->lock_sem); list_for_each_entry_safe(li, tmp, &cifs_file->llist->locks, llist) { list_del(&li->llist); cifs_del_lock_waiters(li); kfree(li); } list_del(&cifs_file->llist->llist); kfree(cifs_file->llist); up_write(&cifsi->lock_sem); So we can safely ignore unlocking failures in cifs_lock() if they happen with the FL_CLOSE flag hint set as both the server and the client take care of it during the actual closing. This is not a proper fix for the unlocking failure but it's safe and it seems to prevent the lock leakages and crashes the customer experiences. Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yang Shi authored
commit a7f40cfe upstream. When MPOL_MF_STRICT was specified and an existing page was already on a node that does not follow the policy, mbind() should return -EIO. But commit 6f4576e3 ("mempolicy: apply page table walker on queue_pages_range()") broke the rule. And commit c8633798 ("mm: mempolicy: mbind and migrate_pages support thp migration") didn't return the correct value for THP mbind() too. If MPOL_MF_STRICT is set, ignore vma_migratable() to make sure it reaches queue_pages_to_pte_range() or queue_pages_pmd() to check if an existing page was already on a node that does not follow the policy. And, non-migratable vma may be used, return -EIO too if MPOL_MF_MOVE or MPOL_MF_MOVE_ALL was specified. Tested with https://github.com/metan-ucw/ltp/blob/master/testcases/kernel/syscalls/mbind/mbind02.c [akpm@linux-foundation.org: tweak code comment] Link: http://lkml.kernel.org/r/1553020556-38583-1-git-send-email-yang.shi@linux.alibaba.com Fixes: 6f4576e3 ("mempolicy: apply page table walker on queue_pages_range()") Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Oscar Salvador <osalvador@suse.de> Reported-by: Cyril Hrubis <chrubis@suse.cz> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Rafael Aquini <aquini@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Razvan Stefanescu authored
commit 69646d7a upstream. In half-duplex operation, RX should be started after TX completes. If DMA is used, there is a case when the DMA transfer completes but the TX FIFO is not emptied, so the RX cannot be restarted just yet. Use a boolean variable to store this state and rearm TX interrupt mask to be signaled again that the transfer finished. In interrupt transmit handler this variable is used to start RX. A warning message is generated if RX is activated before TX fifo is cleared. Fixes: b389f173 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Razvan Stefanescu authored
commit f3040983 upstream. Use a helper function to check that a port needs to use half duplex communication, replacing several occurrences of multi-line bit checking. Fixes: b389f173 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Cc: stable <stable@vger.kernel.org> Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Zijlstra authored
commit f8ae107e upstream. The initial value (@M) compute is: m = 1UL << (BITS_PER_LONG - 2); while (m > x) m >>= 2; Which is a linear search for the highest even bit smaller or equal to @x We can implement this using a binary search using __fls() (or better when its hardware implemented). m = 1UL << (__fls(x) & ~1UL); Especially for small values of @x; which are the more common arguments when doing a CDF on idle times; the linear search is near to worst case, while the binary search of __fls() is a constant 6 (or 5 on 32bit) branches. cycles: branches: branch-misses: PRE: hot: 43.633557 +- 0.034373 45.333132 +- 0.002277 0.023529 +- 0.000681 cold: 207.438411 +- 0.125840 45.333132 +- 0.002277 6.976486 +- 0.004219 SOFTWARE FLS: hot: 29.576176 +- 0.028850 26.666730 +- 0.004511 0.019463 +- 0.000663 cold: 165.947136 +- 0.188406 26.666746 +- 0.004511 6.133897 +- 0.004386 HARDWARE FLS: hot: 24.720922 +- 0.025161 20.666784 +- 0.004509 0.020836 +- 0.000677 cold: 132.777197 +- 0.127471 20.666776 +- 0.004509 5.080285 +- 0.003874 Averages computed over all values <128k using a LFSR to generate order. Cold numbers have a LFSR based branch trace buffer 'confuser' ran between each int_sqrt() invocation. Link: http://lkml.kernel.org/r/20171020164644.936577234@infradead.orgSigned-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Suggested-by: Joe Perches <joe@perches.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Anshul Garg <aksgarg1989@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Michael Davidson <md@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
zhangyi (F) authored
commit 5e86bdda upstream. Currently, we are releasing the indirect buffer where we are done with it in ext4_ind_remove_space(), so we can see the brelse() and BUFFER_TRACE() everywhere. It seems fragile and hard to read, and we may probably forget to release the buffer some day. This patch cleans up the code by putting of the code which releases the buffers to the end of the function. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jari Ruusu <jari.ruusu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Will Deacon authored
commit b9a4b9d0 upstream. FAR_EL1 is UNKNOWN for all debug exceptions other than those caused by taking a hardware watchpoint. Unfortunately, if a debug handler returns a non-zero value, then we will propagate the UNKNOWN FAR value to userspace via the si_addr field of the SIGTRAP siginfo_t. Instead, let's set si_addr to take on the PC of the faulting instruction, which we have available in the current pt_regs. Cc: <stable@vger.kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 03 Apr, 2019 4 commits
-
-
Greg Kroah-Hartman authored
-
Cornelia Huck authored
commit 50b7f1b7 upstream. When we get an interrupt for a channel program, it is not necessarily the final interrupt; for example, the issuing guest may request an intermediate interrupt by specifying the program-controlled-interrupt flag on a ccw. We must not switch the state to idle if the interrupt is not yet final; even more importantly, we must not free the translated channel program if the interrupt is not yet final, or the host can crash during cp rewind. Fixes: e5f84dba ("vfio: ccw: return I/O results asynchronously") Cc: stable@vger.kernel.org # v4.12+ Reviewed-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
commit cf4df407 upstream. This reverts commit 32fd87b3. Alan wrote a better fix for this... Cc: Andrey Konovalov <andreyknvl@google.com> Cc: stable <stable@vger.kernel.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Christopherson authored
commit 0cf9135b upstream. The CPUID flag ARCH_CAPABILITIES is unconditioinally exposed to host userspace for all x86 hosts, i.e. KVM advertises ARCH_CAPABILITIES regardless of hardware support under the pretense that KVM fully emulates MSR_IA32_ARCH_CAPABILITIES. Unfortunately, only VMX hosts handle accesses to MSR_IA32_ARCH_CAPABILITIES (despite KVM_GET_MSRS also reporting MSR_IA32_ARCH_CAPABILITIES for all hosts). Move the MSR_IA32_ARCH_CAPABILITIES handling to common x86 code so that it's emulated on AMD hosts. Fixes: 1eaafe91 ("kvm: x86: IA32_ARCH_CAPABILITIES is always supported") Cc: stable@vger.kernel.org Reported-by: Xiaoyao Li <xiaoyao.li@linux.intel.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-