- 18 Jul, 2007 40 commits
-
-
Robert P. J. Day authored
Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Robert P. J. Day authored
Replace assignments to "current->state" with the preferred calls to schedule_timeout_interruptible(). Signed-off-by:
-
Hans Verkuil authored
Add support for high volume debug messages, allowing them to be turned on selectively. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Starting an MPEG and VBI capture simultaneously caused errors in the VBI setup: this setup was done twice when it should be done only for the first stream that is opened. Added a mutex to prevent this from happening. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
tune() dvb_frontend callback changed delay signess: int (*tune)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, unsigned int mode_flags, - int *delay, + unsigned int *delay, This change caused warnings on cx24123 and dst modules: /home/v4l/master/v4l/cx24123.c:1034: warning: initialization from incompatible pointer type /home/v4l/master/v4l/dst.c:1782: warning: initialization from incompatible pointer type /home/v4l/master/v4l/dst.c:1808: warning: initialization from incompatible pointer type /home/v4l/master/v4l/dst.c:1837: warning: initialization from incompatible pointer type /home/v4l/master/v4l/dst.c:1860: warning: initialization from incompatible pointer type This patch corrects the function prototype on both modules to follow the core change. Signed-off-by: -
Oliver Endriss authored
Fix signedness warnings (gcc 4.1.1, kernel 2.6.22). Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Oliver Endriss authored
Fix signedness warning (gcc 4.1.1, kernel 2.6.22). Signed-off-by:
-
Oliver Endriss authored
Re-initialize aspect ratio and pan scan after arm crash. Signed-off-by:
-
Oliver Endriss authored
Fix signedness warnings (gcc 4.1.1, kernel 2.6.22). Signed-off-by:
-
Trent Piepho authored
Make some pointers const, and then delete some now unnecessary casts, which were the wrong signedness anyway, being used to strip the const from another pointer. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Trent Piepho authored
New code is simpler, shorter, compiles to about half the size, and is 2 to 4 times faster depending on how many bits in the mask are set. Signed-off-by:
-
Trent Piepho authored
sizeof(palette2fmt) / sizeof(u32) => ARRAY_SIZE(palette2fmt) Signed-off-by:
-
Marco Gittler authored
Better way of creating and loading the firmware used. Update for get_dvb_firmware script to extract the files for opera usb-box Help file for creating the firmware added Signed-off-by:
Marco Gittler <g.marco@freenet.de> Signed-off-by:
-
Douglas Schilling Landgraf authored
Added GemTek USB radio and removed experimental dependency. Signed-off-by:
Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by:
-
Thierry MERLE authored
- usbvision_muxsel simplified, now uses some well known constants. - since the decoder needs to change input norm, call to muxsel added when changing video standard. Signed-off-by:
Thierry MERLE <thierry.merle@free.fr> Acked-by:
Dwaine Garden <DwaineGarden@rogers.com> Signed-off-by:
-
Matthew Garrett authored
Alter the tuner type for the WinTV USB UK PAL model. Signed-off-by:
Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by:
-
Thierry MERLE authored
- Hauppauge WinTV USB SECAM_L fixed (needed some picture X and Y shiftings) Signed-off-by:
-
James Le Cuirot authored
It has been confirmed that the FlyDVB IR codes currently in the kernel work with the LifeView FlyDVB-S LR300. This one line addition adds it to the list of supported cards. Signed-off-by:
James Le Cuirot <chewi@aura-online.co.uk> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Before kernel 2.6.14, the driver checked for status before stopping the thread. So, a compatibility test did exist. After 2.6.14, the if (state) were replaced by: if (1) However, it makes no sense to keep the if(1). Signed-off-by: -
Mauro Carvalho Chehab authored
Some includes were added after some non-include macros, on old drivers. Better to keep all includes at the beginning of the files. This change also helps to make backports to properly work at the development tree. Signed-off-by: -
Jean Delvare authored
Clean up the use of structure templates in cx88-i2c and cx88-vp3054-i2c. For one thing, a real template is supposed to be read-only. And in some cases it's more efficient to initialize the few fields we need individually. This clean-up shrinks cx88-i2c.o by 33% and cx88-vp3054-i2c.o by 49% (x86_64). Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Adrian Bunk authored
Now that it's static, it should no longer be exported to modules... Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adrian Bunk authored
The following doesn't make much sense: drivers/media/video/Kconfig: ... config TUNER_TEA5761 tristate "TEA 5761 radio tuner (EXPERIMENTAL)" ... drivers/media/video/Makefile: ... ifneq ($(CONFIG_TUNER_TEA5761),) tuner-objs += tea5761.o endif ... With this setup, TUNER_TEA5761=m is equivalent to TUNER_TEA5761=y. This patch therefore changes TUNER_TEA5761 to a bool. The missing dependency on EXPERIMENTAL the prompt text indicates also gets added by this patch. Additionally, the Makefile entry can now be written in a more compact way. Signed-off-by: -
Matthias Kaehlcke authored
The Virtual Video driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by:
Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by:
-
Matthias Kaehlcke authored
The Philips webcam driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. -- Signed-off-by:
-
Trent Piepho authored
Adds the advanced debugging register read/write ioctl support to the bttv driver. Signed-off-by:
-
Trent Piepho authored
For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by:
-
Trent Piepho authored
The bttv driver has code to detect if a tda9887 is present, that was previous used to auto-load the tda9887 driver. Now there is no tda9887 driver, so the code is pointless; it just figures out if it should load the driver and then does nothing. For cards that are defined as having no tuner, the init code would still do i2c probes for various tuner devices and auto-load the tuner module. That can be skipped for cards that don't need it. The code is made to understand that in addition to 'UNSET', 'TUNER_ABSENT' also means no tuner. The tuner into printk()s are also made nicer. Levels are added, INFO or WARNING, depending on the meaning. For cards with no tuner, or no tuner defined, a more informative message is printed. Card has no tuner, before patch: bttv0: tuner type=-1 or bttv0: tuner type=4 After patch: bttv0: tuner absent Card has a tuner, but the type isn't defined, before patch: bttv0: tuner type=-1 After patch: bttv0: tuner type unset [<- also warning now, as the tuner won't work right] Signed-off-by:
-
Michael Krufky authored
add analog video support for DViCO FusionHDTV 2 Thanks to Todd Ignasiak for donating the card. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
The old description was "Philips 1236D ATSC/NTSC dual in", which can be confused with other Philips tuner models. This patch corrects the name to "Philips FCV1236D ATSC/NTSC dual in", and updates the range and params array names to match the description. Signed-off-by:
-
Michael Krufky authored
- Remove hardcoded fcv1236d tuner programmming from or51211.c - Alter dvb-bt8xx for the pcHDTV-2000 to use dvb-pll for fcv1236d support. Thanks to Jarom Hatch <jshatch@gmail.com> for testing this change. Signed-off-by:
-
Michael Krufky authored
This patch adds support to the dvb-pll library for the Philips fcv1236d tuner, based on the FCV1236D datasheet. Signed-off-by:
-
Marco Gittler authored
The dvb_usb_device* d is not used anymore and can be removed. Signed-off-by:
-
Michael Krufky authored
Move internal structures and debug macros to drivers/media/video/tuner-driver.h Signed-off-by:
-
Antoine Jacquet authored
Add Trust Powerc@m 970Z (0x06d6:0x003b) to the list of supported devices. Signed-off-by:
Antoine Jacquet <royale@zerezo.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Potentially, all board types with I2C and IR support can use an i2c based IR. Currently, the driver is selected only if bt848 or saa7134 boards are selected. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by:
-
