- 28 Mar, 2018 29 commits
-
-
Jagdish Gediya authored
commit fa8e6d58 upstream. As per the IFC hardware manual, Most significant 2 bytes in nand_fsr register are the outcome of NAND READ STATUS command. So status value need to be shifted and aligned as per the nand framework requirement. Fixes: 82771882 ("NAND Machine support for Integrated Flash Controller") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by:
Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by:
Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masami Hiramatsu authored
commit c5d343b6 upstream. In Documentation/trace/kprobetrace.txt, it says @SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol) However, the parser doesn't parse minus offset correctly, since commit 2fba0c88 ("tracing/kprobes: Fix probe offset to be unsigned") drops minus ("-") offset support for kprobe probe address usage. This fixes the traceprobe_split_symbol_offset() to parse minus offset again with checking the offset range, and add a minus offset check in kprobe probe address usage. Link: http://lkml.kernel.org/r/152129028983.31874.13419301530285775521.stgit@devbox Cc: Ingo Molnar <mingo@redhat.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Fixes: 2fba0c88 ("tracing/kprobes: Fix probe offset to be unsigned") Acked-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Larry Finger authored
commit 78dc897b upstream. In commit c713fb07 ("rtlwifi: rtl8821ae: Fix connection lost problem correctly") a problem in rtl8821ae that caused loss of signal was fixed. That same problem has now been reported for rtl8723be. Accordingly, the ASPM L1 latency has been increased from 0 to 7 to fix the instability. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Tested-by:
James Cameron <quozl@laptop.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Arend Van Spriel authored
commit 455f3e76 upstream. The firmware has a requirement that the P2P_DEVICE address should be different from the address of the primary interface. When not specified by user-space, the driver generates the MAC address for the P2P_DEVICE interface using the MAC address of the primary interface and setting the locally administered bit. However, the MAC address of the primary interface may already have that bit set causing the creation of the P2P_DEVICE interface to fail with -EBUSY. Fix this by using a random address instead to determine the P2P_DEVICE address. Cc: stable@vger.kernel.org # 3.10.y Reported-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Dan Williams authored
commit dc9e0a93 upstream. Commit 99759869 "acpi: Add acpi_map_pxm_to_online_node()" added support for mapping a given proximity to its nearest, by SLIT distance, online node. However, it sometimes returns unexpected results due to the fact that it switches from comparing the PXM node to the last node that was closer than the current max. for_each_online_node(n) { dist = node_distance(node, n); if (dist < min_dist) { min_dist = dist; node = n; <---- from this point we're using the wrong node for node_distance() Fixes: 99759869 ("acpi: Add acpi_map_pxm_to_online_node()") Cc: <stable@vger.kernel.org> Reviewed-by:
Toshi Kani <toshi.kani@hp.com> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 3b82a4db upstream. The memmap options sent to the udl framebuffer driver were not being checked for all sets of possible crazy values. Fix this up by properly bounding the allowed values. Reported-by:
Eyal Itkin <eyalit@checkpoint.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180321154553.GA18454@kroah.comSigned-off-by:
-
Michel Dänzer authored
commit 2681bc79 upstream. Turning off the sink in this case causes various issues, because userspace expects it to stay on until it turns it off explicitly. Instead, turn the sink off and back on when a display is connected again. This dance seems necessary for link training to work correctly. Bugzilla: https://bugs.freedesktop.org/105308 Cc: stable@vger.kernel.org Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 73a88250 upstream. When validating legacy surfaces, the backup bo might be destroyed at surface validate time. However, the kms resource validation code may have the bo reserved, so we will destroy a locked mutex. While there shouldn't be any other users of that mutex when it is destroyed, it causes a lock leak and thus throws a lockdep error. Fix this by having the kms resource validation code hold a reference to the bo while we have it reserved. We do this by introducing a validation context which might come in handy when the kms code is extended to validate multiple resources or buffers. Cc: <stable@vger.kernel.org> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Brian Paul <brianp@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Toshi Kani authored
commit 28ee90fe upstream. Implement pud_free_pmd_page() and pmd_free_pte_page() on x86, which clear a given pud/pmd entry and free up lower level page table(s). The address range associated with the pud/pmd entry must have been purged by INVLPG. Link: http://lkml.kernel.org/r/20180314180155.19492-3-toshi.kani@hpe.com Fixes: e61ce6ad ("mm: change ioremap to set up huge I/O mappings") Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Reported-by:
Lei Li <lious.lilei@hisilicon.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Toshi Kani authored
commit b6bdb751 upstream. On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ad ("mm: change ioremap to set up huge I/O mappings") Reported-by:
-
Hans de Goede authored
commit d418ff56 upstream. When commit 9c7be59f ("libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs") was added it inherited the ATA_HORKAGE_NO_NCQ_TRIM quirk from the existing "Crucial_CT*MX100*" entry, but that entry sets model_rev to "MU01", where as the entry adding the NOLPM quirk sets it to NULL. This means that after this commit we no apply the NO_NCQ_TRIM quirk to all "Crucial_CT512MX100*" SSDs even if they have the fixed "MU02" firmware. This commit splits the "Crucial_CT512MX100*" quirk into 2 quirks, one for the "MU01" firmware and one for all other firmware versions, so that we once again only apply the NO_NCQ_TRIM quirk to the "MU01" firmware version. Fixes: 9c7be59f ("libata: Apply NOLPM quirk to ... MX100 512GB SSDs") Cc: stable@vger.kernel.org Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Hans de Goede authored
commit 3bf7b5d6 upstream. Commit b17e5729 ("libata: disable LPM for Crucial BX100 SSD 500GB drive"), introduced a ATA_HORKAGE_NOLPM quirk for Crucial BX100 500GB SSDs but limited this to the MU02 firmware version, according to: http://www.crucial.com/usa/en/support-ssd-firmware MU02 is the last version, so there are no newer possibly fixed versions and if the MU02 version has broken LPM then the MU01 almost certainly also has broken LPM, so this commit changes the quirk to apply to all firmware versions. Fixes: b17e5729 ("libata: disable LPM for Crucial BX100 SSD 500GB...") Cc: stable@vger.kernel.org Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Hans de Goede authored
commit 62ac3f73 upstream. There have been reports of the Crucial M500 480GB model not working with LPM set to min_power / med_power_with_dipm level. It has not been tested with medium_power, but that typically has no measurable power-savings. Note the reporters Crucial_CT480M500SSD3 has a firmware version of MU03 and there is a MU05 update available, but that update does not mention any LPM fixes in its changelog, so the quirk matches all firmware versions. In my experience the LPM problems with (older) Crucial SSDs seem to be limited to higher capacity versions of the SSDs (different firmware?), so this commit adds a NOLPM quirk for the 480 and 960GB versions of the M500, to avoid LPM causing issues with these SSDs. Cc: stable@vger.kernel.org Reported-and-tested-by:
Martin Steigerwald <martin@lichtvoll.de> Signed-off-by:
-
Ju Hyung Park authored
commit ca6bfcb2 upstream. Samsung explicitly states that queued TRIM is supported for Linux with 860 PRO and 860 EVO. Make the previous blacklist to cover only 840 and 850 series. Signed-off-by:
Park Ju Hyung <qkrwngud825@gmail.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Kai-Heng Feng authored
commit b17e5729 upstream. After Laptop Mode Tools starts to use min_power for LPM, a user found out Crucial BX100 SSD can't get mounted. Crucial BX100 SSD 500GB drive don't work well with min_power. This also happens to med_power_with_dipm. So let's disable LPM for Crucial BX100 SSD 500GB drive. BugLink: https://bugs.launchpad.net/bugs/1726930Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Hans de Goede authored
commit 9c7be59f upstream. Various people have reported the Crucial MX100 512GB model not working with LPM set to min_power. I've now received a report that it also does not work with the new med_power_with_dipm level. It does work with medium_power, but that has no measurable power-savings and given the amount of people being bitten by the other levels not working, this commit just disables LPM altogether. Note all reporters of this have either the 512GB model (max capacity), or are not specifying their SSD's size. So for now this quirk assumes this is a problem with the 512GB model only. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=89261 Buglink: https://github.com/linrunner/TLP/issues/84 Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
commit 9173e5e8 upstream. syzkaller hit a WARN() in ata_qc_issue() when writing to /dev/sg0. This happened because it issued a READ_6 command with no data buffer. Just remove the WARN(), as it doesn't appear indicate a kernel bug. The expected behavior is to fail the command, which the code does. Here's a reproducer that works in QEMU when /dev/sg0 refers to a disk of the default type ("82371SB PIIX3 IDE"): #include <fcntl.h> #include <unistd.h> int main() { char buf[42] = { [36] = 0x8 /* READ_6 */ }; write(open("/dev/sg0", O_RDWR), buf, sizeof(buf)); } Fixes: f92a2636 ("libata: change ATA_QCFLAG_DMAMAP semantics") Reported-by: syzbot+f7b556d1766502a69d85071d2ff08bd87be53d0f@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> # v2.6.25+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
commit 058f58e2 upstream. syzkaller reported a crash in ata_bmdma_fill_sg() when writing to /dev/sg1. The immediate cause was that the ATA command's scatterlist was not DMA-mapped, which causes 'pi - 1' to underflow, resulting in a write to 'qc->ap->bmdma_prd[0xffffffff]'. Strangely though, the flag ATA_QCFLAG_DMAMAP was set in qc->flags. The root cause is that when __ata_scsi_queuecmd() is preparing to relay a SCSI command to an ATAPI device, it doesn't correctly validate the CDB length before copying it into the 16-byte buffer 'cdb' in 'struct ata_queued_cmd'. Namely, it validates the fixed CDB length expected based on the SCSI opcode but not the actual CDB length, which can be larger due to the use of the SG_NEXT_CMD_LEN ioctl. Since 'flags' is the next member in ata_queued_cmd, a buffer overflow corrupts it. Fix it by requiring that the actual CDB length be <= 16 (ATAPI_CDB_LEN). [Really it seems the length should be required to be <= dev->cdb_len, but the current behavior seems to have been intentionally introduced by commit 607126c2 ("libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs") to work around a userspace bug in mplayer. Probably the workaround is no longer needed (mplayer was fixed in 2007), but continuing to allow lengths to up 16 appears harmless for now.] Here's a reproducer that works in QEMU when /dev/sg1 refers to the CD-ROM drive that qemu-system-x86_64 creates by default: #include <fcntl.h> #include <sys/ioctl.h> #include <unistd.h> #define SG_NEXT_CMD_LEN 0x2283 int main() { char buf[53] = { [36] = 0x7e, [52] = 0x02 }; int fd = open("/dev/sg1", O_RDWR); ioctl(fd, SG_NEXT_CMD_LEN, &(int){ 17 }); write(fd, buf, sizeof(buf)); } The crash was: BUG: unable to handle kernel paging request at ffff8cb97db37ffc IP: ata_bmdma_fill_sg drivers/ata/libata-sff.c:2623 [inline] IP: ata_bmdma_qc_prep+0xa4/0xc0 drivers/ata/libata-sff.c:2727 PGD fb6c067 P4D fb6c067 PUD 0 Oops: 0002 [#1] SMP CPU: 1 PID: 150 Comm: syz_ata_bmdma_q Not tainted 4.15.0-next-20180202 #99 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 [...] Call Trace: ata_qc_issue+0x100/0x1d0 drivers/ata/libata-core.c:5421 ata_scsi_translate+0xc9/0x1a0 drivers/ata/libata-scsi.c:2024 __ata_scsi_queuecmd drivers/ata/libata-scsi.c:4326 [inline] ata_scsi_queuecmd+0x8c/0x210 drivers/ata/libata-scsi.c:4375 scsi_dispatch_cmd+0xa2/0xe0 drivers/scsi/scsi_lib.c:1727 scsi_request_fn+0x24c/0x530 drivers/scsi/scsi_lib.c:1865 __blk_run_queue_uncond block/blk-core.c:412 [inline] __blk_run_queue+0x3a/0x60 block/blk-core.c:432 blk_execute_rq_nowait+0x93/0xc0 block/blk-exec.c:78 sg_common_write.isra.7+0x272/0x5a0 drivers/scsi/sg.c:806 sg_write+0x1ef/0x340 drivers/scsi/sg.c:677 __vfs_write+0x31/0x160 fs/read_write.c:480 vfs_write+0xa7/0x160 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0x4d/0xc0 fs/read_write.c:581 do_syscall_64+0x5e/0x110 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x21/0x86 Fixes: 607126c2 ("libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs") Reported-by: syzbot+1ff6f9fcc3c35f1c72a95e26528c8e7e3276e4da@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> # v2.6.24+ Signed-off-by:
-
Takashi Iwai authored
commit f44cb4b1 upstream. The Atheros 1525/QCA6174 BT doesn't seem working properly on the recent kernels, as it tries to load a wrong firmware ar3k/AthrBT_0x00000200.dfu and it fails. This seems to have been a problem for some time, and the known workaround is to apply BTUSB_QCA_ROM quirk instead of BTUSB_ATH3012. The device in question is: T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=3004 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1082504Reported-by:
Ivan Levshin <ivan.levshin@microfocus.com> Tested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Boris Brezillon authored
commit 7997f3b2 upstream. CM_PLLx and A2W_XOSC_CTRL registers are accessed by different clock handlers and must be accessed with ->regs_lock held. Update the sections where this protection is missing. Fixes: 41691b88 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Signed-off-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Hans de Goede authored
commit 28b2182d upstream. Like the Highpoint Rocketraid 642L and cards using a Marvel 88SE9235 controller in general, this RAID card also supports AHCI mode and short of a custom driver, this is the only way to make it work under Linux. Note that even though the card is called to 644L, it has a product-id of 0x0645. Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1534106Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Hans de Goede authored
commit 1903be82 upstream. The Highpoint RocketRAID 644L uses a Marvel 88SE9235 controller, as with other Marvel controllers this needs a function 1 DMA alias quirk. Note the RocketRAID 642L uses the same Marvel 88SE9235 controller and already is listed with a function 1 DMA alias quirk. Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1534106Signed-off-by:
-
Evgeniy Didin authored
commit 47b7de2f upstream. It was found that in IDMAC mode after soft-reset driver switches to PIO mode. That's what happens in case of DTO timeout overflow calculation failure: 1. soft-reset is called 2. driver restarts dma 3. descriptors states are checked, one of descriptor is owned by the IDMAC. 4. driver can't use DMA and then switches to PIO mode. Failure was already fixed in: https://www.spinics.net/lists/linux-mmc/msg48125.html. Behaviour while soft-reset is not something we except or even want to happen. So we switch from dw_mci_idmac_reset to dw_mci_idmac_init, so descriptors are cleaned before starting dma. And while at it explicitly zero des0 which otherwise might contain garbage as being allocated by dmam_alloc_coherent(). Signed-off-by:
Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Takashi Iwai authored
commit e40bdb03 upstream. Some HP laptops have a mute mute LED controlled by a pin VREF. The Realtek codec driver updates the VREF via vmaster hook by calling snd_hda_set_pin_ctl_cache(). This works fine as long as the driver is running in a normal mode. However, when the VREF change happens during the codec being in runtime PM suspend, the regmap access will skip and postpone the actual register change. This ends up with the unchanged LED status until the next runtime PM resume even if you change the Master mute switch. (Interestingly, the machine keeps the LED status even after the codec goes into D3 -- but it's another story.) For improving this usability, let the driver temporarily powering up / down only during the pin VREF change. This can be achieved easily by wrapping the call with snd_hda_power_up_pm() / *_down_pm(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199073 Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 8e6b1a72 upstream. In loopback_open() and loopback_close(), we assign and release the substream object to the corresponding cable in a racy way. It's neither locked nor done in the right position. The open callback assigns the substream before its preparation finishes, hence the other side of the cable may pick it up, which may lead to the invalid memory access. This patch addresses these: move the assignment to the end of the open callback, and wrap with cable->lock for avoiding concurrent accesses. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 67a01afa upstream. The aloop driver tries to stop the pending timer via timer_del() in the trigger callback and in the close callback. The former is correct, as it's an atomic operation, while the latter expects that the timer gets really removed and proceeds the resource releases after that. But timer_del() doesn't synchronize, hence the running timer may still access the released resources. A similar situation can be also seen in the prepare callback after trigger(STOP) where the prepare tries to re-initialize the things while a timer is still running. The problems like the above are seen indirectly in some syzkaller reports (although it's not 100% clear whether this is the only cause, as the race condition is quite narrow and not always easy to trigger). For addressing these issues, this patch adds the explicit alls of timer_del_sync() in some places, so that the pending timer is properly killed / synced. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kirill Marinushkin authored
commit a6618f4a upstream. Currently, the offsets in the UAC2 processing unit descriptor are calculated incorrectly. It causes an issue when connecting the device which provides such a feature: ~~~~ [84126.724420] usb 1-1.3.1: invalid Processing Unit descriptor (id 18) ~~~~ After this patch is applied, the UAC2 processing unit inits w/o this error. Fixes: 23caaf19 ("ALSA: usb-mixer: Add support for Audio Class v2.0") Signed-off-by:
Kirill Marinushkin <k.marinushkin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Michael Nosthoff authored
commit 8b438686 upstream. Commit 7383d44b added a pointer pdata which get set to the default platform_data when non was defined in the device. But it did not pass this pointer to the st_sensors_init_sensor call but still used the maybe uninitialized platform_data from dev. This breaks initialization when no platform_data is given and the optional st,drdy-int-pin devicetree option is not set. This commit fixes this. Cc: stable@vger.kernel.org Fixes: 7383d44b ("iio: st_pressure: st_accel: Initialise sensor platform data properly") Signed-off-by:
Michael Nosthoff <committed@heine.so> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
NeilBrown authored
commit 891731f6 upstream. ralink_halt() does nothing that machine_halt() doesn't already do, so it adds no value. It actually causes incorrect behaviour due to the "unreachable()" at the end. This tells the compiler that the end of the function will never be reached, which isn't true. The compiler responds by not adding a 'return' instruction, so control simply moves on to whatever bytes come afterwards in memory. In my tested, that was the ralink_restart() function. This means that an attempt to 'halt' the machine would actually cause a reboot. So remove ralink_halt() so that a 'halt' really does halt. Fixes: c06e836a ("MIPS: ralink: adds reset code") Signed-off-by:
NeilBrown <neil@brown.name> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.9+ Patchwork: https://patchwork.linux-mips.org/patch/18851/Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
- 24 Mar, 2018 11 commits
-
-
Greg Kroah-Hartman authored
-
Leon Romanovsky authored
commit 7688f2c3 upstream. The attempt to join multicast group without ensuring that CMA device exists will lead to the following crash reported by syzkaller. [ 64.076794] BUG: KASAN: null-ptr-deref in rdma_join_multicast+0x26e/0x12c0 [ 64.076797] Read of size 8 at addr 00000000000000b0 by task join/691 [ 64.076797] [ 64.076800] CPU: 1 PID: 691 Comm: join Not tainted 4.16.0-rc1-00219-gb97853b65b93 #23 [ 64.076802] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4 [ 64.076803] Call Trace: [ 64.076809] dump_stack+0x5c/0x77 [ 64.076817] kasan_report+0x163/0x380 [ 64.085859] ? rdma_join_multicast+0x26e/0x12c0 [ 64.086634] rdma_join_multicast+0x26e/0x12c0 [ 64.087370] ? rdma_disconnect+0xf0/0xf0 [ 64.088579] ? __radix_tree_replace+0xc3/0x110 [ 64.089132] ? node_tag_clear+0x81/0xb0 [ 64.089606] ? idr_alloc_u32+0x12e/0x1a0 [ 64.090517] ? __fprop_inc_percpu_max+0x150/0x150 [ 64.091768] ? tracing_record_taskinfo+0x10/0xc0 [ 64.092340] ? idr_alloc+0x76/0xc0 [ 64.092951] ? idr_alloc_u32+0x1a0/0x1a0 [ 64.093632] ? ucma_process_join+0x23d/0x460 [ 64.094510] ucma_process_join+0x23d/0x460 [ 64.095199] ? ucma_migrate_id+0x440/0x440 [ 64.095696] ? futex_wake+0x10b/0x2a0 [ 64.096159] ucma_join_multicast+0x88/0xe0 [ 64.096660] ? ucma_process_join+0x460/0x460 [ 64.097540] ? _copy_from_user+0x5e/0x90 [ 64.098017] ucma_write+0x174/0x1f0 [ 64.098640] ? ucma_resolve_route+0xf0/0xf0 [ 64.099343] ? rb_erase_cached+0x6c7/0x7f0 [ 64.099839] __vfs_write+0xc4/0x350 [ 64.100622] ? perf_syscall_enter+0xe4/0x5f0 [ 64.101335] ? kernel_read+0xa0/0xa0 [ 64.103525] ? perf_sched_cb_inc+0xc0/0xc0 [ 64.105510] ? syscall_exit_register+0x2a0/0x2a0 [ 64.107359] ? __switch_to+0x351/0x640 [ 64.109285] ? fsnotify+0x899/0x8f0 [ 64.111610] ? fsnotify_unmount_inodes+0x170/0x170 [ 64.113876] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 64.115813] ? ring_buffer_record_is_on+0xd/0x20 [ 64.117824] ? __fget+0xa8/0xf0 [ 64.119869] vfs_write+0xf7/0x280 [ 64.122001] SyS_write+0xa1/0x120 [ 64.124213] ? SyS_read+0x120/0x120 [ 64.126644] ? SyS_read+0x120/0x120 [ 64.128563] do_syscall_64+0xeb/0x250 [ 64.130732] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 64.132984] RIP: 0033:0x7f5c994ade99 [ 64.135699] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 64.138740] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99 [ 64.141056] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015 [ 64.143536] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000 [ 64.146017] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0 [ 64.148608] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0 [ 64.151060] [ 64.153703] Disabling lock debugging due to kernel taint [ 64.156032] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0 [ 64.159066] IP: rdma_join_multicast+0x26e/0x12c0 [ 64.161451] PGD 80000001d0298067 P4D 80000001d0298067 PUD 1dea39067 PMD 0 [ 64.164442] Oops: 0000 [#1] SMP KASAN PTI [ 64.166817] CPU: 1 PID: 691 Comm: join Tainted: G B 4.16.0-rc1-00219-gb97853b65b93 #23 [ 64.170004] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4 [ 64.174985] RIP: 0010:rdma_join_multicast+0x26e/0x12c0 [ 64.177246] RSP: 0018:ffff8801c8207860 EFLAGS: 00010282 [ 64.179901] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff94789522 [ 64.183344] RDX: 1ffffffff2d50fa5 RSI: 0000000000000297 RDI: 0000000000000297 [ 64.186237] RBP: ffff8801c8207a50 R08: 0000000000000000 R09: ffffed0039040ea7 [ 64.189328] R10: 0000000000000001 R11: ffffed0039040ea6 R12: 0000000000000000 [ 64.192634] R13: 0000000000000000 R14: ffff8801e2022800 R15: ffff8801d4ac2400 [ 64.196105] FS: 00007f5c99b98700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000 [ 64.199211] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 64.202046] CR2: 00000000000000b0 CR3: 00000001d1c48004 CR4: 00000000003606a0 [ 64.205032] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 64.208221] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 64.211554] Call Trace: [ 64.213464] ? rdma_disconnect+0xf0/0xf0 [ 64.216124] ? __radix_tree_replace+0xc3/0x110 [ 64.219337] ? node_tag_clear+0x81/0xb0 [ 64.222140] ? idr_alloc_u32+0x12e/0x1a0 [ 64.224422] ? __fprop_inc_percpu_max+0x150/0x150 [ 64.226588] ? tracing_record_taskinfo+0x10/0xc0 [ 64.229763] ? idr_alloc+0x76/0xc0 [ 64.232186] ? idr_alloc_u32+0x1a0/0x1a0 [ 64.234505] ? ucma_process_join+0x23d/0x460 [ 64.237024] ucma_process_join+0x23d/0x460 [ 64.240076] ? ucma_migrate_id+0x440/0x440 [ 64.243284] ? futex_wake+0x10b/0x2a0 [ 64.245302] ucma_join_multicast+0x88/0xe0 [ 64.247783] ? ucma_process_join+0x460/0x460 [ 64.250841] ? _copy_from_user+0x5e/0x90 [ 64.253878] ucma_write+0x174/0x1f0 [ 64.257008] ? ucma_resolve_route+0xf0/0xf0 [ 64.259877] ? rb_erase_cached+0x6c7/0x7f0 [ 64.262746] __vfs_write+0xc4/0x350 [ 64.265537] ? perf_syscall_enter+0xe4/0x5f0 [ 64.267792] ? kernel_read+0xa0/0xa0 [ 64.270358] ? perf_sched_cb_inc+0xc0/0xc0 [ 64.272575] ? syscall_exit_register+0x2a0/0x2a0 [ 64.275367] ? __switch_to+0x351/0x640 [ 64.277700] ? fsnotify+0x899/0x8f0 [ 64.280530] ? fsnotify_unmount_inodes+0x170/0x170 [ 64.283156] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 64.286182] ? ring_buffer_record_is_on+0xd/0x20 [ 64.288749] ? __fget+0xa8/0xf0 [ 64.291136] vfs_write+0xf7/0x280 [ 64.292972] SyS_write+0xa1/0x120 [ 64.294965] ? SyS_read+0x120/0x120 [ 64.297474] ? SyS_read+0x120/0x120 [ 64.299751] do_syscall_64+0xeb/0x250 [ 64.301826] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 64.304352] RIP: 0033:0x7f5c994ade99 [ 64.306711] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 64.309577] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99 [ 64.312334] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015 [ 64.315783] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000 [ 64.318365] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0 [ 64.320980] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0 [ 64.323515] Code: e8 e8 79 08 ff 4c 89 ff 45 0f b6 a7 b8 01 00 00 e8 68 7c 08 ff 49 8b 1f 4d 89 e5 49 c1 e4 04 48 8 [ 64.330753] RIP: rdma_join_multicast+0x26e/0x12c0 RSP: ffff8801c8207860 [ 64.332979] CR2: 00000000000000b0 [ 64.335550] ---[ end trace 0c00c17a408849c1 ]--- Reported-by: <syzbot+e6aba77967bd72cbc9d6@syzkaller.appspotmail.com> Fixes: c8f6a362 ("RDMA/cma: Add multicast communication support") Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Sean Hefty <sean.hefty@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Vignesh R authored
[ Upstream commit d087f157 ] Register layout of a typical TPCC_EVT_MUX_M_N register is such that the lowest numbered event is at the lowest byte address and highest numbered event at highest byte address. But TPCC_EVT_MUX_60_63 register layout is different, in that the lowest numbered event is at the highest address and highest numbered event is at the lowest address. Therefore, modify ti_am335x_xbar_write() to handle TPCC_EVT_MUX_60_63 register accordingly. Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Sergej Sawazki authored
[ Upstream commit cdba9a4f ] This drivers probe fails due to a clock name collision if a clock named 'plla' or 'pllb' is already registered when registering this drivers internal plls. Fix it by renaming internal plls to avoid name collisions. Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by:
Sergej Sawazki <sergej@taudac.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Benjamin Coddington authored
[ Upstream commit 66282ec1 ] Clients must be able to read a file in order to execute it, and for pNFS that means the client needs to be able to perform a LAYOUTGET on the file. This behavior for executable-only files was added for OPEN in commit a043226b "nfsd4: permit read opens of executable-only files". This fixes up xfstests generic/126 on block/scsi layouts. Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Anton Vasilyev authored
[ Upstream commit 74482086 ] Debugfs file reset_stats is created with S_IRUSR permissions, but ocrdma_dbgfs_ops_read() doesn't support OCRDMA_RESET_STATS, whereas ocrdma_dbgfs_ops_write() supports only OCRDMA_RESET_STATS. The patch fixes misstype with permissions. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Anton Vasilyev <vasilyev@ispras.ru> Acked-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Alexey Kodanev authored
[ Upstream commit 53c81e95 ] LTP/udp6_ipsec_vti tests fail when sending large UDP datagrams over ip6_vti that require fragmentation and the underlying device has an MTU smaller than 1500 plus some extra space for headers. This happens because ip6_vti, by default, sets MTU to ETH_DATA_LEN and not updating it depending on a destination address or link parameter. Further attempts to send UDP packets may succeed because pmtu gets updated on ICMPV6_PKT_TOOBIG in vti6_err(). In case the lower device has larger MTU size, e.g. 9000, ip6_vti works but not using the possible maximum size, output packets have 1500 limit. The above cases require manual MTU setup after ip6_vti creation. However ip_vti already updates MTU based on lower device with ip_tunnel_bind_dev(). Here is the example when the lower device MTU is set to 9000: # ip a sh ltp_ns_veth2 ltp_ns_veth2@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 ... inet 10.0.0.2/24 scope global ltp_ns_veth2 inet6 fd00::2/64 scope global # ip li add vti6 type vti6 local fd00::2 remote fd00::1 # ip li show vti6 vti6@NONE: <POINTOPOINT,NOARP> mtu 1500 ... link/tunnel6 fd00::2 peer fd00::1 After the patch: # ip li add vti6 type vti6 local fd00::2 remote fd00::1 # ip li show vti6 vti6@NONE: <POINTOPOINT,NOARP> mtu 8832 ... link/tunnel6 fd00::2 peer fd00::1 Reported-by:
Petr Vorel <pvorel@suse.cz> Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jerry Snitselaar authored
[ Upstream commit 72d54811 ] It is unlikely request_threaded_irq will fail, but if it does for some reason we should clear iommu->pr_irq in the error path. Also intel_svm_finish_prq shouldn't try to clean up the page request interrupt if pr_irq is 0. Without these, if request_threaded_irq were to fail the following occurs: fail with no fixes: [ 0.683147] ------------[ cut here ]------------ [ 0.683148] NULL pointer, cannot free irq [ 0.683158] WARNING: CPU: 1 PID: 1 at kernel/irq/irqdomain.c:1632 irq_domain_free_irqs+0x126/0x140 [ 0.683160] Modules linked in: [ 0.683163] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #3 [ 0.683165] Hardware name: /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017 [ 0.683168] RIP: 0010:irq_domain_free_irqs+0x126/0x140 [ 0.683169] RSP: 0000:ffffc90000037ce8 EFLAGS: 00010292 [ 0.683171] RAX: 000000000000001d RBX: ffff880276283c00 RCX: ffffffff81c5e5e8 [ 0.683172] RDX: 0000000000000001 RSI: 0000000000000096 RDI: 0000000000000246 [ 0.683174] RBP: ffff880276283c00 R08: 0000000000000000 R09: 000000000000023c [ 0.683175] R10: 0000000000000007 R11: 0000000000000000 R12: 000000000000007a [ 0.683176] R13: 0000000000000001 R14: 0000000000000000 R15: 0000010010000000 [ 0.683178] FS: 0000000000000000(0000) GS:ffff88027ec80000(0000) knlGS:0000000000000000 [ 0.683180] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.683181] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0 [ 0.683182] Call Trace: [ 0.683189] intel_svm_finish_prq+0x3c/0x60 [ 0.683191] free_dmar_iommu+0x1ac/0x1b0 [ 0.683195] init_dmars+0xaaa/0xaea [ 0.683200] ? klist_next+0x19/0xc0 [ 0.683203] ? pci_do_find_bus+0x50/0x50 [ 0.683205] ? pci_get_dev_by_id+0x52/0x70 [ 0.683208] intel_iommu_init+0x498/0x5c7 [ 0.683211] pci_iommu_init+0x13/0x3c [ 0.683214] ? e820__memblock_setup+0x61/0x61 [ 0.683217] do_one_initcall+0x4d/0x1a0 [ 0.683220] kernel_init_freeable+0x186/0x20e [ 0.683222] ? set_debug_rodata+0x11/0x11 [ 0.683225] ? rest_init+0xb0/0xb0 [ 0.683226] kernel_init+0xa/0xff [ 0.683229] ret_from_fork+0x1f/0x30 [ 0.683259] Code: 89 ee 44 89 e7 e8 3b e8 ff ff 5b 5d 44 89 e7 44 89 ee 41 5c 41 5d 41 5e e9 a8 84 ff ff 48 c7 c7 a8 71 a7 81 31 c0 e8 6a d3 f9 ff <0f> ff 5b 5d 41 5c 41 5d 41 5 e c3 0f 1f 44 00 00 66 2e 0f 1f 84 [ 0.683285] ---[ end trace f7650e42792627ca ]--- with iommu->pr_irq = 0, but no check in intel_svm_finish_prq: [ 0.669561] ------------[ cut here ]------------ [ 0.669563] Trying to free already-free IRQ 0 [ 0.669573] WARNING: CPU: 3 PID: 1 at kernel/irq/manage.c:1546 __free_irq+0xa4/0x2c0 [ 0.669574] Modules linked in: [ 0.669577] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #4 [ 0.669579] Hardware name: /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017 [ 0.669581] RIP: 0010:__free_irq+0xa4/0x2c0 [ 0.669582] RSP: 0000:ffffc90000037cc0 EFLAGS: 00010082 [ 0.669584] RAX: 0000000000000021 RBX: 0000000000000000 RCX: ffffffff81c5e5e8 [ 0.669585] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000046 [ 0.669587] RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000023c [ 0.669588] R10: 0000000000000007 R11: 0000000000000000 R12: ffff880276253960 [ 0.669589] R13: ffff8802762538a4 R14: ffff880276253800 R15: ffff880276283600 [ 0.669593] FS: 0000000000000000(0000) GS:ffff88027ed80000(0000) knlGS:0000000000000000 [ 0.669594] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.669596] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0 [ 0.669602] Call Trace: [ 0.669616] free_irq+0x30/0x60 [ 0.669620] intel_svm_finish_prq+0x34/0x60 [ 0.669623] free_dmar_iommu+0x1ac/0x1b0 [ 0.669627] init_dmars+0xaaa/0xaea [ 0.669631] ? klist_next+0x19/0xc0 [ 0.669634] ? pci_do_find_bus+0x50/0x50 [ 0.669637] ? pci_get_dev_by_id+0x52/0x70 [ 0.669639] intel_iommu_init+0x498/0x5c7 [ 0.669642] pci_iommu_init+0x13/0x3c [ 0.669645] ? e820__memblock_setup+0x61/0x61 [ 0.669648] do_one_initcall+0x4d/0x1a0 [ 0.669651] kernel_init_freeable+0x186/0x20e [ 0.669653] ? set_debug_rodata+0x11/0x11 [ 0.669656] ? rest_init+0xb0/0xb0 [ 0.669658] kernel_init+0xa/0xff [ 0.669661] ret_from_fork+0x1f/0x30 [ 0.669662] Code: 7a 08 75 0e e9 c3 01 00 00 4c 39 7b 08 74 57 48 89 da 48 8b 5a 18 48 85 db 75 ee 89 ee 48 c7 c7 78 67 a7 81 31 c0 e8 4c 37 fa ff <0f> ff 48 8b 34 24 4c 89 ef e 8 0e 4c 68 00 49 8b 46 40 48 8b 80 [ 0.669688] ---[ end trace 58a470248700f2fc ]--- Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by:
Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by:
Ashok Raj <ashok.raj@intel.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 981ed1bf ] In case a platform only defaults a "default" set of pins, but not a "sleep" set of pins, and this particular platform suspends and resumes in a way that the pin states are not preserved by the hardware, when we resume, we would call pinctrl_single_resume() -> pinctrl_force_default() -> pinctrl_select_state() and the first thing we do is check that the pins state is the same as before, and do nothing. In order to fix this, decouple the actual state change from pinctrl_select_state() and move it pinctrl_commit_state(), while keeping the p->state == state check in pinctrl_select_state() not to change the caller assumptions. pinctrl_force_sleep() and pinctrl_force_default() are updated to bypass the state check by calling pinctrl_commit_state(). [Linus Walleij] The forced pin control states are currently only used in some pin controller drivers that grab their own reference to their own pins. This is equal to the pin control hogs: pins taken by pin control devices since there are no corresponding device in the Linux device hierarchy, such as memory controller lines or unused GPIO lines, or GPIO lines that are used orthogonally from the GPIO subsystem but pincontrol-wise managed as hogs (non-strict mode, allowing simultaneous use by GPIO and pin control). For this case forcing the state from the drivers' suspend()/resume() callbacks makes sense and should semantically match the name of the function. Fixes: 6e5e959d ("pinctrl: API changes to support multiple states per device") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Robert Walker authored
[ Upstream commit 11595db8 ] The CoreSight TPIU should be disabled when tracing to other sinks to allow them to operate at full bandwidth. This patch fixes tpiu_disable_hw() to correctly disable the TPIU by configuring the TPIU to stop on flush, initiating a manual flush, waiting for the flush to complete and then waits for the TPIU to indicate it has stopped. Signed-off-by:
Robert Walker <robert.walker@arm.com> Tested-by:
Mike Leach <mike.leach@linaro.org> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Sahara authored
[ Upstream commit 2b022ab7 ] In case that CONFIG_SLUB_DEBUG is on and pty is used, races between release_one_tty and flush_to_ldisc work threads may happen and lead to use-after-free condition on tty->link->port. Because SLUB_DEBUG is turned on, freed tty->link->port is filled with POISON_FREE value. So far without SLUB_DEBUG, port was filled with zero and flush_to_ldisc could return without a problem by checking if tty is NULL. CPU 0 CPU 1 ----- ----- release_tty pty_write cancel_work_sync(tty) to = tty->link tty_kref_put(tty->link) tty_schedule_flip(to->port) << workqueue >> ... release_one_tty ... pty_cleanup ... kfree(tty->link->port) << workqueue >> flush_to_ldisc tty = READ_ONCE(port->itty) tty is 0x6b6b6b6b6b6b6b6b !!PANIC!! access tty->ldisc Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b93 pgd = ffffffc0eb1c3000 [6b6b6b6b6b6b6b93] *pgd=0000000000000000, *pud=0000000000000000 ------------[ cut here ]------------ Kernel BUG at ffffff800851154c [verbose debug info unavailable] Internal error: Oops - BUG: 96000004 [#1] PREEMPT SMP CPU: 3 PID: 265 Comm: kworker/u8:9 Tainted: G W 3.18.31-g0a58eeb #1 Hardware name: Qualcomm Technologies, Inc. MSM 8996pro v1.1 + PMI8996 Carbide (DT) Workqueue: events_unbound flush_to_ldisc task: ffffffc0ed610ec0 ti: ffffffc0ed624000 task.ti: ffffffc0ed624000 PC is at ldsem_down_read_trylock+0x0/0x4c LR is at tty_ldisc_ref+0x24/0x4c pc : [<ffffff800851154c>] lr : [<ffffff800850f6c0>] pstate: 80400145 sp : ffffffc0ed627cd0 x29: ffffffc0ed627cd0 x28: 0000000000000000 x27: ffffff8009e05000 x26: ffffffc0d382cfa0 x25: 0000000000000000 x24: ffffff800a012f08 x23: 0000000000000000 x22: ffffffc0703fbc88 x21: 6b6b6b6b6b6b6b6b x20: 6b6b6b6b6b6b6b93 x19: 0000000000000000 x18: 0000000000000001 x17: 00e80000f80d6f53 x16: 0000000000000001 x15: 0000007f7d826fff x14: 00000000000000a0 x13: 0000000000000000 x12: 0000000000000109 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffc0ed624000 x8 : ffffffc0ed611580 x7 : 0000000000000000 x6 : ffffff800a42e000 x5 : 00000000000003fc x4 : 0000000003bd1201 x3 : 0000000000000001 x2 : 0000000000000001 x1 : ffffff800851004c x0 : 6b6b6b6b6b6b6b93 Signed-off-by:
Sahara <keun-o.park@darkmatter.ae> Signed-off-by:
-
