Sysfs symlinks now require fully registered kobjects as a target,
otherwise the call to create a symlink will fail. Here we register
the kobject before we request the symlink in the holders directory.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Tejun Heo <teheo@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

We should remove the glue directory between the class and the bus
device _after_ we sent out the 'remove' event for the device, otherwise
the parent relationship is no longer valid, and composing the path
with deleted sysfs entries will not work.

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1013) was suggested by David Woodhouse; it fixes a race
in the driver core.  If a device is unregistered at the same time as
its driver is unloaded, the driver's code pages may be unmapped while
the remove method is still running.  The calls to get_driver() and
put_driver() were intended to prevent this, but they don't work if the
driver's module count has already dropped to 0.

Instead, the patch keeps the device on the driver's list until after
the remove method has returned.  This forces the necessary
synchronization to occur.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The driver core debugging messages are a mess.  This provides a unified
message that makes them actually useful.

The format for new kobject debug messages should be:
	driver/bus/class: 'OBJECT_NAME': FUNCTION_NAME: message.\n

Note, the class code is not changed in this patch due to pending patches
in my queue that this would conflict with.  A later patch will clean
them up.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch removes the kobject, and a few other driver-core-only fields
out of struct driver and into the driver core only.  Now drivers can be
safely create on the stack or statically (like they currently are.)

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The module driver specific code should belong in the driver core, not in
the kernel/ directory.  So move this code.  This is done in preparation
for some struct device_driver rework that should be confined to the
driver core code only.

This also lets us keep from exporting these functions, as no external
code should ever be calling it.

Thanks to Andrew Morton for the !CONFIG_MODULES fix.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The iseries driver wants to hang kobjects off of its driver, so, to
preserve backwards compatibility, we need to add a call to the driver
core to allow future changes to work properly.

Hopefully no one uses this function in the future and the iseries_veth
driver authors come to their senses so I can remove this hack...

Cc: Dave Larson <larson1@us.ibm.com>
Cc: Santiago Leon <santil@us.ibm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Make the ipath driver use the new driver functions so that it does not
touch the sysfs portion of the driver structure.

We also remove the redundant symlink from the device back to the driver,
as it is already in the sysfs tree.  Any userspace tools should be using
the standard symlink, not some driver specific one.

Cc: Roland Dreier <rdreier@cisco.com>
Cc: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: Arthur Jones <arthur.jones@qlogic.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

CC: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

CC: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is lot like default attributes for devices (and indeed,
a lot of the code is lifted from there).
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The PCI bus should not be trying to declare its own attribute type.
Especially as this code could never ever be called because the driver
core overwrites the driver kobject type to be its own internal type.
Delete all of this code as it was never being used and is not correct.

Also update my copyright on the file while I'm touching things there.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Don't try to call the "raw" sysfs_create_file when we already have a
helper function to do this kind of work for us.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Don't try to call the "raw" sysfs_create_file when we already have a
helper function to do this kind of work for us.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Don't try to call the "raw" sysfs_create_file when we already have a
helper function to do this kind of work for us.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

struct bus_type is static everywhere in the kernel.  This moves the
kobject in the structure out of it, and a bunch of other private only to
the driver core fields are now moved to a private structure.  This lets
us dynamically create the backing kobject properly and gives us the
chance to be able to document to users exactly how to use the struct
bus_type as there are no fields they can improperly access.

Thanks to Kay for the build fixes on this patch.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This allows an easier way to get to the device klist associated with a
struct bus_type (you have three to choose from...)  This will make it
easier to move these fields to be dynamic in a future patch.

The only user of this is the PCI core which horribly abuses this
interface to rearrange the order of the pci devices.  This should be
done using the existing bus device walking functions, but that's left
for future patches.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This allows an easier way to get to the kset associated with a struct
bus_type (you have three to choose from...)  This will make it easier to
move these fields to be dynamic in a future patch.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This isn't used by anything in the driver core, and by no one in the 204
different usages of it in the kernel tree.  Remove this field so no one
gets any idea that it is needed to be used.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This converts the code to use the new kobject functions, cleaning up the
logic in doing so.

Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This converts the code to use the new kobject functions, cleaning up the
logic in doing so.

Cc: Christoph Lameter <clameter@sgi.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This converts the code to use the new kobject functions, cleaning up the
logic in doing so.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This converts the code to use the new kobject functions, cleaning up the
logic in doing so.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This converts the code to use the new kobject functions, cleaning up the
logic in doing so.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This converts the code to use the new kobject functions, cleaning up the
logic in doing so.

Cc: Kyle A. Lucke <klucke@us.ibm.com>
Cc: David Gibson <dwg@au1.ibm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This converts the code to use the new kobject functions, cleaning up the
logic in doing so.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This converts the code to use the new kobject functions, cleaning up the
logic in doing so.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This code is really really really broken.  So much so that it's almost
impossible to fix with a simple patch, so just comment out the offending
registration with the kobject core, and mark the driver as broken.

The problem is that the code is trying to register a "raw" struct
device, which is not allowed.  struct device is only for use within the
driver model.  This is being done to try to use the firmware layer which
wants a struct device.  To properly fix this, use something easy, like a
platform device, which is a struct device and can be used for this kind
of thing.

Cc: Mikael Starvik <starvik@axis.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Jacob Shin <jacob.shin@amd.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Make this kobject dynamic and convert it to not use kobject_register,
which is going away.

Cc: Jacob Shin <jacob.shin@amd.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Neil Brown <neilb@suse.de>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Tony Luck <tony.luck@intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Kyle McMartin <kyle@parisc-linux.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Dave Larson <larson1@us.ibm.com>
Cc: Santiago Leon <santil@us.ibm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Stop using kobject_register for this static kobject, as it's overkill.
This way is much simpler.

Cc: Len Brown <len.brown@intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>