- 07 Jul, 2022 32 commits
-
-
Jiang Jian authored
There is an unexpected word "the" in the comments that needs to be dropped. file: ./drivers/s390/scsi/zfcp_diag.h line: 5 * Definitions for handling diagnostics in the the zfcp device driver. changed to * Definitions for handling diagnostics in the zfcp device driver. Link: https://lore.kernel.org/r/20220621114207.106405-1-jiangjian@cdjrlc.com Link: https://lore.kernel.org/r/4c02fefa19ab46f0f163990bde3ce10bd9c7caf1.1657122360.git.bblock@linux.ibm.comReviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Julian Wiedmann authored
These attributes are now only accessed through the zfcp_sysfs_sdev_attr_group. Link: https://lore.kernel.org/r/0791b9149ebfa39e6b8eab093113cd2527dbf3d3.1657122360.git.bblock@linux.ibm.com Fixes: d8d7cf3f ("scsi: zfcp: Switch to attribute groups") Reviewed-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Junwoo Lee authored
Once the host link startup fails 3 times, all host registers are reset to default values except in ufshcd_hba_enable(). The ufs host controller is disabled and enabled in ufshcd_hba_enable(). Consequently we need to skip last hci reset to get valid host register values. e.g. [ 1.898026] [2: kworker/u16:2: 211] ufs: link startup failed 1 [ 1.898133] [2: kworker/u16:2: 211] host_regs: 00000000: 1383ff1f 00000000 00000300 00000000 [ 1.898141] [2: kworker/u16:2: 211] host_regs: 00000010: 00000106 000001ce 00000000 00000000 [ 1.898148] [2: kworker/u16:2: 211] host_regs: 00000020: 00000000 00000470 00000000 00000000 [ 1.898155] [2: kworker/u16:2: 211] host_regs: 00000030: 00000008 00000003 00000000 00000000 [ 1.898163] [2: kworker/u16:2: 211] host_regs: 00000040: 00000000 00000000 00000000 00000000 [ 1.898171] [2: kworker/u16:2: 211] host_regs: 00000050: 00000000 00000000 00000000 00000000 [ 1.898177] [2: kworker/u16:2: 211] host_regs: 00000060: 00000000 00000000 00000000 00000000 [ 1.898186] [2: kworker/u16:2: 211] host_regs: 00000070: 00000000 00000000 00000000 00000000 [ 1.898194] [2: kworker/u16:2: 211] host_regs: 00000080: 00000000 00000000 00000000 00000000 [ 1.898201] [2: kworker/u16:2: 211] host_regs: 00000090: 00000000 00000000 00000000 00000000 Link: https://lore.kernel.org/r/20220705083538.15143-1-sh043.lee@samsung.comReviewed-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
Junwoo Lee <junwoo80.lee@samsung.com> Signed-off-by:
Seunghui Lee <sh043.lee@samsung.com> Signed-off-by:
-
Daniil Lunev authored
Sets the WriteBooster capability flag when ADL's UFS controller is used. Link: https://lore.kernel.org/r/20220705165316.v2.1.Ib5ebec952d9a59f5c69c89b694777f517d22466d@changeidAcked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Daniil Lunev <dlunev@chromium.org> Signed-off-by:
-
James Smart authored
Update copyrights to 2022 for files modified in the 14.2.0.5 patch set. Link: https://lore.kernel.org/r/20220701211425.2708-13-jsmart2021@gmail.comCo-developed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Smart authored
Update lpfc version to 14.2.0.5 Link: https://lore.kernel.org/r/20220701211425.2708-12-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
The Menlo/Hornet adapter was never released to the field. As such, driver code specific to the adapter is unnecessary and should be removed. Link: https://lore.kernel.org/r/20220701211425.2708-11-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
lpfc_nvmet_prep_abort_wqe() has a lot of common code with lpfc_sli_prep_abort_xri(). Delete lpfc_nvmet_prep_abort_wqe() as the wqe can be filled out using the generic lpfc_sli_prep_abort_xri routine(). Add the wqec option to lpfc_sli_prep_abort_xri() for lpfc_nvmet_prep_abort_wqe(). Link: https://lore.kernel.org/r/20220701211425.2708-10-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
The RSCN_MEMENTO logic was to workaround a target that does not register both FCP and NVMe FC4 types at the same time. This caused the configuration to not produce a second RSCN for the NVMe FC4 type registration in a timely manner. The intention of the RSCN_MEMENTO flag was to always signal to try NVMe PRLI. However, there are other FCP-only target arrays in correctly behaved configurations that reject the NVMe PRLI followed by a LOGO leading to never rediscovering the target after an issue_lip (as LOGO causes a repeat of PLOGI/PRLIs). Revert the RSCN_MEMENTO patch as it is causing correctly behaved configs to fail while it exists only to succeed on a misbehaved config. Link: https://lore.kernel.org/r/20220701211425.2708-9-jsmart2021@gmail.com Fixes: 1045592f ("scsi: lpfc: Introduce FC_RSCN_MEMENTO flag for tracking post RSCN completion") Co-developed-by:
-
James Smart authored
During a target link bounce test, the driver sees a mismatch between the NPortId and the WWPN on the node structures (ndlps) involved. When this occurs, the driver "swaps" the ndlp and new_ndlp node parameters to restore WWPN/DID uniqueness in the fc_nodes list per vport. However, the driver neglected to swap the nlp_fc4_type in the ndlp passed to lpfc_plogi_confirm_nport causing a failure to recover the NVMe PLOGI/PRLI and ultimately the NVMe paths. Correct confirm_nport to preserve the fc4 types from the new-ndlp when the data is moved over ot the ndlp structure. Link: https://lore.kernel.org/r/20220701211425.2708-8-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Disabling FA-PWWN should be effective after port reset, but in some cases it was found to be impossible to clear FA-PWWN usage without a driver reload. Clean up FA-PWWN flag management to make enable and disable of the feature more robust. Link: https://lore.kernel.org/r/20220701211425.2708-7-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
There is no corresponding free routine if lpfc_sli4_issue_wqe fails to issue the CMF WQE in lpfc_issue_cmf_sync_wqe. If ret_val is non-zero, then free the iocbq request structure. Link: https://lore.kernel.org/r/20220701211425.2708-6-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
VMID introduced an extra increment of cmd_pending, causing double-counting of the I/O. The normal increment ios performed in lpfc_get_scsi_buf. Link: https://lore.kernel.org/r/20220701211425.2708-5-jsmart2021@gmail.com Fixes: 33c79741 ("scsi: lpfc: vmid: Introduce VMID in I/O path") Cc: <stable@vger.kernel.org> # v5.14+ Co-developed-by:
-
James Smart authored
When providing a D_ID in XMIT_ELS_RSP64_CX iocb the PU field should be set to 3 to describe the parameter being passed to firmware. Link: https://lore.kernel.org/r/20220701211425.2708-4-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Malformed user input to debugfs results in buffer overflow crashes. Adapt input string lengths to fit within internal buffers, leaving space for NULL terminators. Link: https://lore.kernel.org/r/20220701211425.2708-3-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
In lpfc_nvme_cancel_iocb(), a cqe is created locally from stack storage. The code didn't initialize the total_data_placed word, inheriting stack content. Initialize the total_data_placed word. Link: https://lore.kernel.org/r/20220701211425.2708-2-jsmart2021@gmail.comCo-developed-by:
-
Martin K. Petersen authored
Bring in fixes to resolve a merge conflict in the lpfc driver update. Signed-off-by: -
Bart Van Assche authored
For some technologies, e.g. an ATA bus, resuming can take multiple seconds. Waiting for resume to finish can cause a very noticeable delay. Hence this commit that restores the behavior from before "scsi: core: pm: Rely on the device driver core for async power management" for most SCSI devices. This commit introduces a behavior change: if the START command fails, do not consider this as a SCSI disk resume failure. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215880 Link: https://lore.kernel.org/r/20220630195703.10155-3-bvanassche@acm.org Fixes: a19a93e4 ("scsi: core: pm: Rely on the device driver core for async power management") Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: John Garry <john.garry@huawei.com> Cc: ericspero@icloud.com Cc: jason600.groome@gmail.com Tested-by: jason600.groome@gmail.com Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Bart Van Assche authored
Move the definition of SCSI_QUEUE_DELAY to just above the function that uses it. Link: https://lore.kernel.org/r/20220630195703.10155-2-bvanassche@acm.org Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: John Garry <john.garry@huawei.com> Signed-off-by:
-
Jiapeng Chong authored
This was found by coccicheck: drivers/scsi/megaraid/megaraid_sas_base.c:3950 process_fw_state_change_wq() warn: inconsistent indenting. Link: https://lore.kernel.org/r/20220630074152.29171-1-jiapeng.chong@linux.alibaba.comSigned-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Michael Schmitz authored
Use dma_map_single() for gvp11 driver (leave bounce buffer logic unchanged). Use dma_set_mask_and_coherent() to avoid explicit cache flushes. Compile-tested only. CC: linux-scsi@vger.kernel.org Link: https://lore.kernel.org/r/6d1d88ee-1cf6-c735-1e6d-bafd2096e322@gmail.com Link: https://lore.kernel.org/r/20220630033302.3183-4-schmitzmic@gmail.comReviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
-
Michael Schmitz authored
Use dma_map_single() for a2091 driver (leave bounce buffer logic unchanged). Use dma_set_mask_and_coherent() to avoid explicit cache flushes. Compile-tested only. CC: linux-scsi@vger.kernel.org Link: https://lore.kernel.org/r/6d1d88ee-1cf6-c735-1e6d-bafd2096e322@gmail.com Link: https://lore.kernel.org/r/20220630033302.3183-3-schmitzmic@gmail.comReviewed-by:
-
Michael Schmitz authored
Use dma_map_single() for a3000 driver (leave bounce buffer logic unchanged). Use dma_set_mask_and_coherent() to avoid explicit cache flushes. Compile-tested only. CC: linux-scsi@vger.kernel.org Link: https://lore.kernel.org/r/6d1d88ee-1cf6-c735-1e6d-bafd2096e322@gmail.com Link: https://lore.kernel.org/r/20220630033302.3183-2-schmitzmic@gmail.comReviewed-by:
-
Li Zhijian authored
sdev_printk() will only accept messages up to 128 bytes. Shorten strings exceeding 128 bytes avoid printing an incomplete sentence like: [ 475.156955] sd 9:0:0:0: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatical Link: https://lore.kernel.org/r/20220630024516.1571209-1-lizhijian@fujitsu.comSuggested-by:
Finn Thain <fthain@linux-m68k.org> Reviewed-by:
Li Zhijian <lizhijian@fujitsu.com> Signed-off-by:
-
Mike Christie authored
On our backend we can do something similar to LIO where we can enable and disable UNMAP support on the fly. In the SCSI/block layer we can detect this by just doing a rescan. However, LIO cannot detect this change because we only check during the initial configuration. This patch allows UNMAP detection to also happen when the user tries to turn it on. Link: https://lore.kernel.org/r/20220628200230.15052-6-michael.christie@oracle.comReviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
-
Mike Christie authored
Move file's UNMAP setup code to a configure_unmap callout. Link: https://lore.kernel.org/r/20220628200230.15052-5-michael.christie@oracle.comReviewed-by:
-
Mike Christie authored
Move iblock's UNMAP setup code to a configure_unmap callout. Link: https://lore.kernel.org/r/20220628200230.15052-4-michael.christie@oracle.comReviewed-by:
-
Mike Christie authored
Add a callout to configure a backend's UNMAP settings. This will be used to allow userspace to configure UNMAP after the initial device setup, similar to how we can set up the other attributes post device configuration. Link: https://lore.kernel.org/r/20220628200230.15052-3-michael.christie@oracle.comReviewed-by:
-
Mike Christie authored
We use WSNZ=1 so if we get a WRITE_SAME with zero logical blocks we are supposed to fail it. We do this check and failure in target_core_sbc.c before calling into the backend, so we can remove the incorrect check in target_core_file. Link: https://lore.kernel.org/r/20220628200230.15052-2-michael.christie@oracle.comReviewed-by:
-
Sreekanth Reddy authored
Increase cmd_per_lun to 128. Link: https://lore.kernel.org/r/20220628074848.5036-3-sreekanth.reddy@broadcom.comSigned-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
-
Sreekanth Reddy authored
Enable shared host tagset to make sure that total outstanding I/O count can not exceed controller's can_queue setting. Link: https://lore.kernel.org/r/20220628074848.5036-2-sreekanth.reddy@broadcom.comSigned-off-by:
-
Dan Carpenter authored
There is a copy and paste bug here. It should check ".rsp" instead of ".req". The error message is copy and pasted as well so update that too. Link: https://lore.kernel.org/r/YrK1A/t3L6HKnswO@kili Fixes: 9c40c36e ("scsi: qla2xxx: edif: Reduce Initiator-Initiator thrashing") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 28 Jun, 2022 8 commits
-
-
ChanWoo Lee authored
Checks information about tx_lanes, but is not used. Since commit 1e1e465c ("scsi/ufs: qcom: Remove ufs_qcom_phy_*() calls from host"), tx_lanes is deprecated. As a result, ufs_qcom_link_startup_notify -> POST_CHANGE action does nothing. If it is not going to be updated, it can be removed. Link: https://lore.kernel.org/r/20220627235545.16943-1-cw9316.lee@samsung.comReviewed-by:
ChanWoo Lee <cw9316.lee@samsung.com> Signed-off-by:
-
Alice Chao authored
NULL pointer access issue was found for the regulator released by ufs_mtk_vreg_fix_vccq(). Simply fix this issue by clearing the released vreg pointer in ufs_hba struct. Link: https://lore.kernel.org/r/20220623035052.18802-9-stanley.chu@mediatek.comReviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Alice Chao <alice.chao@mediatek.com> Signed-off-by:
-
Peter Wang authored
Add pm-qos request to support performance boosting in MediaTek UFS platforms. At the same time, adjust the order of function calls to be symmetric during the low-power control flow. Link: https://lore.kernel.org/r/20220623035052.18802-8-stanley.chu@mediatek.comReviewed-by:
Peter Wang <peter.wang@mediatek.com> Signed-off-by:
-
Po-Wen Kao authored
Add interfaces for controlling the host power to optimize the power consumption in MediaTek UFS platforms. Link: https://lore.kernel.org/r/20220623035052.18802-7-stanley.chu@mediatek.comReviewed-by:
Po-Wen Kao <powen.kao@mediatek.com> Signed-off-by:
-
Po-Wen Kao authored
In MediaTek UFS platforms, UniPro will not return reset confirm if it is in POWERDOWN state thus hang issue may happen while disabling UFSHCI. Simply disable this feature before UniPro leaves POWERDOWN state. Link: https://lore.kernel.org/r/20220623035052.18802-6-stanley.chu@mediatek.comReviewed-by:
-
Peter Wang authored
Add "PRE_CHANGE" and "POST_CHANGE" information for ref-clk control to precisely configure the low-power state of the parent of ref-clk. Link: https://lore.kernel.org/r/20220623035052.18802-5-stanley.chu@mediatek.comReviewed-by:
-
Peter Wang authored
Some UFSHCI hosts in MediaTek UFS platform need workaround to prevent host hang issue by setting CLK_CG bit before host is enabled. This operation shall have no side effect on those platforms which do not support this bit. Link: https://lore.kernel.org/r/20220623035052.18802-4-stanley.chu@mediatek.comReviewed-by:
-
Peter Wang authored
MediaTek decides to always add delays before and after VCC is turned-off. Link: https://lore.kernel.org/r/20220623035052.18802-3-stanley.chu@mediatek.comReviewed-by:
-
