- 25 Jul, 2023 30 commits
-
-
Lorenzo Bianconi authored
Get rid of private copy of mib_stats structure. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
mib_stats structure is shared by mostly all chipsets. Move it to shared code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Get rid of MT_MIB_RTS_COUNT_MASK marco duplication in mt7921/regs.h Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Deren Wu authored
mt7921 support following antenna combiantions only. * primary + secondary (2x2) * primary only (1x1) Since we cannot work on secondary antenna only, return error if the antenna bitmap is 0x2 in .set_antenna(). For example: iw phy0 set antenna 3 3 /* valid */ iw phy0 set antenna 1 1 /* valid */ iw phy0 set antenna 2 2 /* invalid */ Cc: stable@vger.kernel.org Fixes: e0f9fdda ("mt76: mt7921: add ieee80211_ops") Suggested-by: Knox Chiou <knoxchiou@google.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
Avoid blocking other statistics sinfo->filled when txrate is unavailable. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
Avoid blocking other statistics sinfo->filled when txrate is unavailable. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Peter Chiu authored
AQL relies on accurate tx rate reporting, so add this patch for non-binding skb rate when WED is enabled. Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Peter Chiu authored
Concurrent binding/non-binding skbs could be handled anywhere which leads to mixed byte counting, so switch to use PPDU TxS reporting regardless Tx paths when WED is active. Fixes: 43eaa368 ("wifi: mt76: add PPDU based TxS support for WED device") Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Peter Chiu authored
PPDU TxS can only report MPDU count whereas mac80211 requires MSDU scale (NL80211_STA_INFO_TX_PACKETS), so switch to get MSDU counts from WA statistic. Note that mt7915 WA firmware only counts tx_packet for WED path, so driver needs to take care of host path additionally. Fixes: 43eaa368 ("wifi: mt76: add PPDU based TxS support for WED device") Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
Get missing tx retries/failed counts from txfree done events and report them via mt7915_sta_statistics(). Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
StanleyYP Wang authored
The background radar uses MT_RX_SEL2 as its band indication, so fix it. Fixes: 7a53eecd (wifi: mt76: mt7915: check the correctness of event data) Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
Enable support for the 5GHz channel 177 with center frequency 5885MHz and operating class 125 based on IEEE Std 802.11ax-2021 Table E-4. Signed-off-by: Himanshu Goyal <himanshu.goyal@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
The Group ID Management frame is an Action frame of category VHT. It is transmitted by the AP to assign or change the user position of a STA for one or more group IDs. Also, sniffer can use a given group id to monitor STA that belongs to that group. Notify underlying driver of changes via BSS_CHANGED_MU_GROUPS. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
The Group ID Management frame is an Action frame of category VHT. It is transmitted by the AP to assign or change the user position of a STA for one or more group IDs. Also, sniffer can use a given group id to monitor STA that belongs to that group. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
When header translation failure is indicated, the hardware will insert an extra 2-byte field containing the data length after the protocol type field. This happens either when the LLC-SNAP pattern did not match, or if a VLAN header was detected. The previous commit accidentally breaks the logic, so reverts back. Fixes: 27db47ab (wifi: mt76: mt7996: enable mesh HW amsdu/de-amsdu support) Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Matt Whitlock authored
mt7921_usb_sdio_tx_prepare_skb() calls mt7921_usb_sdio_write_txwi() and mt7921_skb_add_usb_sdio_hdr(), both of which blindly assume that adequate headroom will be available in the passed skb. This assumption typically is satisfied when the skb was allocated in the net core for transmission via the mt7921 netdev (although even that is only an optimization and is not strictly guaranteed), but the assumption is sometimes not satisfied when the skb originated in the receive path of another netdev and was passed through to the mt7921, such as by the bridge layer. Blindly prepending bytes to an skb is always wrong. This commit introduces a call to skb_cow_head() before the call to mt7921_usb_sdio_write_txwi() in mt7921_usb_sdio_tx_prepare_skb() to ensure that at least MT_SDIO_TXD_SIZE + MT_SDIO_HDR_SIZE bytes can be pushed onto the skb. Without this fix, I can trivially cause kernel panics by bridging an MT7921AU-based USB 802.11ax interface with an Ethernet interface on an Intel Atom-based x86 system using its onboard RTL8169 PCI Ethernet adapter and also on an ARM-based Raspberry Pi 1 using its onboard SMSC9512 USB Ethernet adapter. Note that the panics do not occur in every system configuration, as they occur only if the receiving netdev leaves less headroom in its received skbs than the mt7921 needs for its SDIO headers. Here is an example stack trace of this panic on Raspberry Pi OS Lite 2023-02-21 running kernel 6.1.24+ [1]: skb_panic from skb_push+0x44/0x48 skb_push from mt7921_usb_sdio_tx_prepare_skb+0xd4/0x190 [mt7921_common] mt7921_usb_sdio_tx_prepare_skb [mt7921_common] from mt76u_tx_queue_skb+0x94/0x1d0 [mt76_usb] mt76u_tx_queue_skb [mt76_usb] from __mt76_tx_queue_skb+0x4c/0xc8 [mt76] __mt76_tx_queue_skb [mt76] from mt76_txq_schedule.part.0+0x13c/0x398 [mt76] mt76_txq_schedule.part.0 [mt76] from mt76_txq_schedule_all+0x24/0x30 [mt76] mt76_txq_schedule_all [mt76] from mt7921_tx_worker+0x58/0xf4 [mt7921_common] mt7921_tx_worker [mt7921_common] from __mt76_worker_fn+0x9c/0xec [mt76] __mt76_worker_fn [mt76] from kthread+0xbc/0xe0 kthread from ret_from_fork+0x14/0x34 After this fix, bridging the mt7921 interface works fine on both of my previously problematic systems. [1] https://github.com/raspberrypi/firmware/tree/5c276f55a4b21345cd4d6200a504ee991851ff7a Link: https://github.com/openwrt/openwrt/issues/11796Signed-off-by: Matt Whitlock <kernel@mattwhitlock.name> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Dmitry Antipov authored
Remove unused 'struct gpioh_item'. It seems it was so since commit 5b435de0 ("net: wireless: add brcm80211 drivers"). Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230719083232.158177-1-dmantipov@yandex.ru
-
Johannes Wiesboeck authored
Allow moving the wiphy device for mwififex to a non-inital network namespace. Many wireless drivers enable this flag implicitly by initializing through the generic ieee80211_alloc_hw_nm function. As mwifiex does not utilize this function WIPHY_FLAG_NETNS_OK must be set explicitly. Moving to network namespace and working connection tested using wpa_supplicant from a network namespace as well as from a container on GyroidOS. The hardware was the Toradex Apalis i.MX8QM Board using the Azurewave AW-CM276NF wireless module. Signed-off-by: Johannes Wiesboeck <johannes.wiesboeck@aisec.fraunhofer.de> Reviewed-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230706093437.3380526-1-johannes.wiesboeck@aisec.fraunhofer.de
-
Dmitry Antipov authored
When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y, I've noticed the following: In function ‘fortify_memcpy_chk’, inlined from ‘mwifiex_construct_tdls_action_frame’ at drivers/net/wireless/marvell/mwifiex/tdls.c:765:3, inlined from ‘mwifiex_send_tdls_action_frame’ at drivers/net/wireless/marvell/mwifiex/tdls.c:856:6: ./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 529 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The compiler actually complains on: memmove(pos + ETH_ALEN, &mgmt->u.action.category, sizeof(mgmt->u.action.u.tdls_discover_resp)); and it happens because the fortification logic interprets this as an attempt to overread 1-byte 'u.action.category' member of 'struct ieee80211_mgmt'. To silence this warning, it's enough to pass an address of 'u.action' itself instead of an address of its first member. This also fixes an improper usage of 'sizeof()'. Since 'skb' is extended with 'sizeof(mgmt->u.action.u.tdls_discover_resp) + 1' bytes (where 1 is actually 'sizeof(mgmt->u.action.category)'), I assume that the same number of bytes should be copied. Suggested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230629085115.180499-2-dmantipov@yandex.ru
-
Dmitry Antipov authored
Prefer 'strscpy()' over 'strlcpy()' in 'mwifiex_init_hw_fw()'. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230629085115.180499-1-dmantipov@yandex.ru
-
Bitterblue Smith authored
Theoretically this chip can handle 127 clients. Only compile tested but it should work as well as the RTL8188FU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/b2876c56-0ea7-c398-5c9b-635f9f894f2c@gmail.com
-
Bitterblue Smith authored
Theoretically this chip can handle 127 clients. Tested only very briefly but it should work as well as the RTL8188FU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/56c9b186-ba9a-8469-652d-ce1709813e9e@gmail.com
-
Bitterblue Smith authored
Theoretically this chip can handle 15 clients. Tested only very briefly but it should work as well as the RTL8188FU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/ce04a0a1-df72-ea30-f742-8834e01457f5@gmail.com
-
Bitterblue Smith authored
Theoretically this chip can handle 127 clients. Tested only very briefly but it should work as well as the RTL8188FU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/ffcabba5-7e9e-674c-ad03-73646b040b96@gmail.com
-
Yueh-Shun Li authored
Spell "transmits" properly. Found by searching for keyword "tranm". Signed-off-by: Yueh-Shun Li <shamrocklee@posteo.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230622012627.15050-4-shamrocklee@posteo.net
-
Zhang Shurong authored
If there is a failure during kstrtobool_from_user() rtw89_debug_priv_btc_manual_set should return a negative error code instead of returning the count directly. Fix this bug by returning an error code instead of a count after a failed call of the function "kstrtobool_from_user". Moreover I omitted the label "out" with this source code correction. Fixes: e3ec7017 ("rtw89: add Realtek 802.11ax driver") Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/tencent_1C09B99BD7DA9CAD18B00C8F0F050F540607@qq.com
-
Dmitry Antipov authored
Since all iterators called by 'rtw_iterate_vifs()' never uses 'mac' argument, it may be omitted, and 'struct rtw_vifs_entry' may be simplified accordingly. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230628072327.167196-4-dmantipov@yandex.ru
-
Dmitry Antipov authored
Drop no longer used 'bulkout_size' of 'struct rtw_usb' as well as related macros from usb.h and leftovers in 'rtw_usb_parse()'. This follows commit 462c8db6 ("wifi: rtw88: usb: drop now unnecessary URB size check"). Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230628072327.167196-3-dmantipov@yandex.ru
-
Dmitry Antipov authored
Drop unused and set but unused 'last_push' of 'struct rtw_txq', 'wireless_set' of 'struct rtw_sta_info', 'usb_txagg_num' of 'struct rtw_usb' and 'n' of 'struct rx_usb_ctrl_block', unused definition of 'struct rtw_timer_list', adjust related code. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230628072327.167196-2-dmantipov@yandex.ru
-
Dmitry Antipov authored
Fix possible crash and memory leak on driver unload by deleting TX purge timer and freeing C2H queue in 'rtw_core_deinit()', shrink critical section in the latter by freeing COEX queue out of TX report lock scope. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230628072327.167196-1-dmantipov@yandex.ru
-
- 24 Jul, 2023 1 commit
-
-
Eric Dumazet authored
IPv6 inet sockets are supposed to have a "struct ipv6_pinfo" field at the end of their definition, so that inet6_sk_generic() can derive from socket size the offset of the "struct ipv6_pinfo". This is very fragile, and prevents adding bigger alignment in sockets, because inet6_sk_generic() does not work if the compiler adds padding after the ipv6_pinfo component. We are currently working on a patch series to reorganize TCP structures for better data locality and found issues similar to the one fixed in commit f5d54767 ("tcp: fix tcp_inet6_sk() for 32bit kernels") Alternative would be to force an alignment on "struct ipv6_pinfo", greater or equal to __alignof__(any ipv6 sock) to ensure there is no padding. This does not look great. v2: fix typo in mptcp_proto_v6_init() (Paolo) Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Chao Wu <wwchao@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Coco Li <lixiaoyan@google.com> Cc: YiFei Zhu <zhuyifei@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Jul, 2023 9 commits
-
-
Patrick Rohr authored
This change adds a new sysctl accept_ra_min_rtr_lft to specify the minimum acceptable router lifetime in an RA. If the received RA router lifetime is less than the configured value (and not 0), the RA is ignored. This is useful for mobile devices, whose battery life can be impacted by networks that configure RAs with a short lifetime. On such networks, the device should never gain IPv6 provisioning and should attempt to drop RAs via hardware offload, if available. Signed-off-by: Patrick Rohr <prohr@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
justinstitt@google.com authored
`strncpy` is deprecated for use on NUL-terminated destination strings [1]. Even call sites utilizing length-bounded destination buffers should switch over to using `strtomem` or `strtomem_pad`. In this case, however, the compiler is unable to determine the size of the `data` buffer which renders `strtomem` unusable. Due to this, `strscpy` should be used. It should be noted that most call sites already zero-initialize the destination buffer. However, I've opted to use `strscpy_pad` to maintain the same exact behavior that `strncpy` produced (zero-padded tail up to `len`). Also see [3]. [1]: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [2]: elixir.bootlin.com/linux/v6.3/source/net/ethtool/ioctl.c#L1944 [3]: manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html Link: https://github.com/KSPP/linux/issues/90Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Justin Stitt <justinstitt@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Anjali Kulkarni says: ==================== Process connector bug fixes & enhancements Oracle DB is trying to solve a performance overhead problem it has been facing for the past 10 years and using this patch series, we can fix this issue. Oracle DB runs on a large scale with 100000s of short lived processes, starting up and exiting quickly. A process monitoring DB daemon which tracks and cleans up after processes that have died without a proper exit needs notifications only when a process died with a non-zero exit code (which should be rare). Due to the pmon architecture, which is distributed, each process is independent and has minimal interaction with pmon. Hence fd based solutions to track a process's spawning and exit cannot be used. Pmon needs to detect the abnormal death of a process so it can cleanup after. Currently it resorts to checking /proc every few seconds. Other methods we tried like using system call to reduce the above overhead were not accepted upstream. With this change, we add event based filtering to proc connector module so that DB can only listen to the events it is interested in. A new event type PROC_EVENT_NONZERO_EXIT is added, which is only sent by kernel to a listening application when any process exiting has a non-zero exit status. This change will give Oracle DB substantial performance savings - it takes 50ms to scan about 8K PIDs in /proc, about 500ms for 100K PIDs. DB does this check every 3 secs, so over an hour we save 10secs for 100K PIDs. With this, a client can register to listen for only exit or fork or a mix or all of the events. This greatly enhances performance - currently, we need to listen to all events, and there are 9 different types of events. For eg. handling 3 types of events - 8K-forks + 8K-exits + 8K-execs takes 200ms, whereas handling 2 types - 8K-forks + 8K-exits takes about 150ms, and handling just one type - 8K exits takes about 70ms. Measuring the time using pidfds for monitoring 8K process exits took 4 times longer - 200ms, as compared to 70ms using only exit notifications of proc connector. Hence, we cannot use pidfd for our use case. This kind of a new event could also be useful to other applications like Google's lmkd daemon, which needs a killed process's exit notification. This patch series is organized as follows - Patch 1 : Needed for patch 3 to work. Patch 2 : Needed for patch 3 to work. Patch 3 : Fixes some bugs in proc connector, details in the patch. Patch 4 : Adds event based filtering for performance enhancements. Patch 5 : Allow non-root users access to proc connector events. Patch 6 : Selftest code for proc connector. v9->v10 changes: - Rebased to net-next, re-compiled and re-tested. v8->v9 changes: - Added sha1 ("title") of reversed patch as suggested by Eric Dumazet. v7->v8 changes: - Fixed an issue pointed by Liam Howlett in v7. v6->v7 changes: - Incorporated Liam Howlett's comments on v6 - Incorporated Kalesh Anakkur Purayil's comments v5->v6 changes: - Incorporated Liam Howlett's comments - Removed FILTER define from proc_filter.c and added a "-f" run-time option to run new filter code. - Made proc_filter.c a selftest in tools/testing/selftests/connector v4->v5 changes: - Change the cover letter - Fix a small issue in proc_filter.c v3->v4 changes: - Fix comments by Jakub Kicinski to incorporate root access changes within bind call of connector v2->v3 changes: - Fix comments by Jakub Kicinski to separate netlink (patch 2) (after layering) from connector fixes (patch 3). - Minor fixes suggested by Jakub. - Add new multicast group level permissions check at netlink layer. Split this into netlink & connector layers (patches 6 & 7) v1->v2 changes: - Fix comments by Jakub Kicinski to keep layering within netlink and update kdocs. - Move non-root users access patch last in series so remaining patches can go in first. v->v1 changes: - Changed commit log in patch 4 as suggested by Christian Brauner - Changed patch 4 to make more fine grained access to non-root users - Fixed warning in cn_proc.c, Reported-by: kernel test robot <lkp@intel.com> - Fixed some existing warnings in cn_proc.c ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anjali Kulkarni authored
Run as ./proc_filter -f to run new filter code. Run without "-f" to run usual proc connector code without the new filtering code. Signed-off-by: Anjali Kulkarni <anjali.k.kulkarni@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anjali Kulkarni authored
There were a couple of reasons for not allowing non-root users access initially - one is there was some point no proper receive buffer management in place for netlink multicast. But that should be long fixed. See link below for more context. Second is that some of the messages may contain data that is root only. But this should be handled with a finer granularity, which is being done at the protocol layer. The only problematic protocols are nf_queue and the firewall netlink. Hence, this restriction for non-root access was relaxed for NETLINK_ROUTE initially: https://lore.kernel.org/all/20020612013101.A22399@wotan.suse.de/ This restriction has also been removed for following protocols: NETLINK_KOBJECT_UEVENT, NETLINK_AUDIT, NETLINK_SOCK_DIAG, NETLINK_GENERIC, NETLINK_SELINUX. Since process connector messages are not sensitive (process fork, exit notifications etc.), and anyone can read /proc data, we can allow non-root access here. However, since process event notification is not the only consumer of NETLINK_CONNECTOR, we can make this change even more fine grained than the protocol level, by checking for multicast group within the protocol. Allow non-root access for NETLINK_CONNECTOR via NL_CFG_F_NONROOT_RECV but add new bind function cn_bind(), which allows non-root access only for CN_IDX_PROC multicast group. Signed-off-by: Anjali Kulkarni <anjali.k.kulkarni@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anjali Kulkarni authored
This patch adds the capability to filter messages sent by the proc connector on the event type supplied in the message from the client to the connector. The client can register to listen for an event type given in struct proc_input. This event based filteting will greatly enhance performance - handling 8K exits takes about 70ms, whereas 8K-forks + 8K-exits takes about 150ms & handling 8K-forks + 8K-exits + 8K-execs takes 200ms. There are currently 9 different types of events, and we need to listen to all of them. Also, measuring the time using pidfds for monitoring 8K process exits took much longer - 200ms, as compared to 70ms using only exit notifications of proc connector. We also add a new event type - PROC_EVENT_NONZERO_EXIT, which is only sent by kernel to a listening application when any process exiting, has a non-zero exit status. This will help the clients like Oracle DB, where a monitoring process wants notfications for non-zero process exits so it can cleanup after them. This kind of a new event could also be useful to other applications like Google's lmkd daemon, which needs a killed process's exit notification. The patch takes care that existing clients using old mechanism of not sending the event type work without any changes. cn_filter function checks to see if the event type being notified via proc connector matches the event type requested by client, before sending(matches) or dropping(does not match) a packet. Signed-off-by: Anjali Kulkarni <anjali.k.kulkarni@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anjali Kulkarni authored
The current proc connector code has the foll. bugs - if there are more than one listeners for the proc connector messages, and one of them deregisters for listening using PROC_CN_MCAST_IGNORE, they will still get all proc connector messages, as long as there is another listener. Another issue is if one client calls PROC_CN_MCAST_LISTEN, and another one calls PROC_CN_MCAST_IGNORE, then both will end up not getting any messages. This patch adds filtering and drops packet if client has sent PROC_CN_MCAST_IGNORE. This data is stored in the client socket's sk_user_data. In addition, we only increment or decrement proc_event_num_listeners once per client. This fixes the above issues. cn_release is the release function added for NETLINK_CONNECTOR. It uses the newly added netlink_release function added to netlink_sock. It will free sk_user_data. Signed-off-by: Anjali Kulkarni <anjali.k.kulkarni@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anjali Kulkarni authored
A new function netlink_release is added in netlink_sock to store the protocol's release function. This is called when the socket is deleted. This can be supplied by the protocol via the release function in netlink_kernel_cfg. This is being added for the NETLINK_CONNECTOR protocol, so it can free it's data when socket is deleted. Signed-off-by: Anjali Kulkarni <anjali.k.kulkarni@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anjali Kulkarni authored
To use filtering at the connector & cn_proc layers, we need to enable filtering in the netlink layer. This reverses the patch which removed netlink filtering - commit ID for that patch: 549017aa (netlink: remove netlink_broadcast_filtered). Signed-off-by: Anjali Kulkarni <anjali.k.kulkarni@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-