- 20 May, 2015 35 commits
-
-
Ross Lagerwall authored
commit c57dcb56 upstream. Some buggy firmware implementations update VariableNameSize on success such that it does not include the final NUL character which results in garbage in the efivarfs name entries. Use kzalloc on the efivar_entry (as is done in efivars.c) to ensure that the name is always NUL-terminated. The buggy firmware is: BIOS Information Vendor: Intel Corp. Version: S1200RP.86B.02.02.0005.102320140911 Release Date: 10/23/2014 BIOS Revision: 4.6 System Information Manufacturer: Intel Corporation Product Name: S1200RP_SE Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by:
Matthew Garrett <mjg59@coreos.com> Cc: Jeremy Kerr <jk@ozlabs.org> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Florian Westphal authored
commit 330966e5 upstream. skb_gso_segment has three possible return values: 1. a pointer to the first segmented skb 2. an errno value (IS_ERR()) 3. NULL. This can happen when GSO is used for header verification. However, several callers currently test IS_ERR instead of IS_ERR_OR_NULL and would oops when NULL is returned. Note that these call sites should never actually see such a NULL return value; all callers mask out the GSO bits in the feature argument. However, there have been issues with some protocol handlers erronously not respecting the specified feature mask in some cases. It is preferable to get 'have to turn off hw offloading, else slow' reports rather than 'kernel crashes'. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Christoffer Dall authored
commit ae705930 upstream. There is an interesting bug in the vgic code, which manifests itself when the KVM run loop has a signal pending or needs a vmid generation rollover after having disabled interrupts but before actually switching to the guest. In this case, we flush the vgic as usual, but we sync back the vgic state and exit to userspace before entering the guest. The consequence is that we will be syncing the list registers back to the software model using the GICH_ELRSR and GICH_EISR from the last execution of the guest, potentially overwriting a list register containing an interrupt. This showed up during migration testing where we would capture a state where the VM has masked the arch timer but there were no interrupts, resulting in a hung test. Cc: Marc Zyngier <marc.zyngier@arm.com> Reported-by:
Alex Bennee <alex.bennee@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Alex Bennée <alex.bennee@linaro.org> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> [ luis: backported to 3.16: used shannon's backport to 3.14 ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Marc Zyngier authored
commit 04b8dc85 upstream. The kernel's pgd_index macro is designed to index a normal, page sized array. KVM is a bit diffferent, as we can use concatenated pages to have a bigger address space (for example 40bit IPA with 4kB pages gives us an 8kB PGD. In the above case, the use of pgd_index will always return an index inside the first 4kB, which makes a guest that has memory above 0x8000000000 rather unhappy, as it spins forever in a page fault, whist the host happilly corrupts the lower pgd. The obvious fix is to get our own kvm_pgd_index that does the right thing(tm). Tested on X-Gene with a hacked kvmtool that put memory at a stupidly high address. Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> [ luis: backported to 3.16: used shannon's backport to 3.14 ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Marc Zyngier authored
commit 801f6772 upstream. Commit b856a591 (arm/arm64: KVM: Reset the HCR on each vcpu when resetting the vcpu) moved the init of the HCR register to happen later in the init of a vcpu, but left out the fixup done in kvm_reset_vcpu when preparing for a 32bit guest. As a result, the 32bit guest is run as a 64bit guest, but the rest of the kernel still manages it as a 32bit. Fun follows. Moving the fixup to vcpu_reset_hcr solves the problem for good. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Marc Zyngier authored
commit 55e858b7 upstream. It took about two years for someone to notice that the IPA passed to TLBI IPAS2E1IS must be shifted by 12 bits. Clearly our reviewing is not as good as it should be... Paper bag time for me. Reported-by:
Mario Smarduch <m.smarduch@samsung.com> Tested-by:
Mario Smarduch <m.smarduch@samsung.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Christoffer Dall authored
commit 05971120 upstream. It is curently possible to run a VM with architected timers support without creating an in-kernel VGIC, which will result in interrupts from the virtual timer going nowhere. To address this issue, move the architected timers initialization to the time when we run a VCPU for the first time, and then only initialize (and enable) the architected timers if we have a properly created and initialized in-kernel VGIC. When injecting interrupts from the virtual timer to the vgic, the current setup should ensure that this never calls an on-demand init of the VGIC, which is the only call path that could return an error from kvm_vgic_inject_irq(), so capture the return value and raise a warning if there's an error there. We also change the kvm_timer_init() function from returning an int to be a void function, since the function always succeeds. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Christoffer Dall authored
commit 716139df upstream. When the vgic initializes its internal state it does so based on the number of VCPUs available at the time. If we allow KVM to create more VCPUs after the VGIC has been initialized, we are likely to error out in unfortunate ways later, perform buffer overflows etc. Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Eric Auger <eric.auger@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Christoffer Dall authored
commit 957db105 upstream. Introduce a new function to unmap user RAM regions in the stage2 page tables. This is needed on reboot (or when the guest turns off the MMU) to ensure we fault in pages again and make the dcache, RAM, and icache coherent. Using unmap_stage2_range for the whole guest physical range does not work, because that unmaps IO regions (such as the GIC) which will not be recreated or in the best case faulted in on a page-by-page basis. Call this function on secondary and subsequent calls to the KVM_ARM_VCPU_INIT ioctl so that a reset VCPU will detect the guest Stage-1 MMU is off when faulting in pages and make the caches coherent. Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Christoffer Dall authored
commit b856a591 upstream. When userspace resets the vcpu using KVM_ARM_VCPU_INIT, we should also reset the HCR, because we now modify the HCR dynamically to enable/disable trapping of guest accesses to the VM registers. This is crucial for reboot of VMs working since otherwise we will not be doing the necessary cache maintenance operations when faulting in pages with the guest MMU off. Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Christoffer Dall authored
commit 3ad8b3de upstream. The implementation of KVM_ARM_VCPU_INIT is currently not doing what userspace expects, namely making sure that a vcpu which may have been turned off using PSCI is returned to its initial state, which would be powered on if userspace does not set the KVM_ARM_VCPU_POWER_OFF flag. Implement the expected functionality and clarify the ABI. Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Christoffer Dall authored
commit 03f1d4c1 upstream. If a VCPU was originally started with power off (typically to be brought up by PSCI in SMP configurations), there is no need to clear the POWER_OFF flag in the kernel, as this flag is only tested during the init ioctl itself. Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Ard Biesheuvel authored
commit 07a9748c upstream. Instead of using kvm_is_mmio_pfn() to decide whether a host region should be stage 2 mapped with device attributes, add a new static function kvm_is_device_pfn() that disregards RAM pages with the reserved bit set, as those should usually not be mapped as device memory. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Geoff Levand authored
commit 286fb1cc upstream. Some of the macros defined in kvm_arm.h are useful in assembly files, but are not compatible with the assembler. Change any C language integer constant definitions using appended U, UL, or ULL to the UL() preprocessor macro. Also, add a preprocessor include of the asm/memory.h file which defines the UL() macro. Fixes build errors like these when using kvm_arm.h in assembly source files: Error: unexpected characters following instruction at operand 3 -- `and x0,x1,#((1U<<25)-1)' Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Christoffer Dall authored
commit 6b50f540 upstream. If we detect another vCPU is running we just exit and return 0 as if we succesfully created the VGIC, but the VGIC wouldn't actual be created. This shouldn't break in-kernel behavior because the kernel will not observe the failed the attempt to create the VGIC, but userspace could be rightfully confused. Cc: Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Mark Rutland authored
commit 7cbb87d6 upstream. Currently if using a 48-bit VA, tearing down the hyp page tables (which can happen in the absence of a GICH or GICV resource) results in the rather nasty splat below, evidently becasue we access a table that doesn't actually exist. Commit 38f791a4 (arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2) added a pgd_none check to __create_hyp_mappings to account for the additional level of tables, but didn't add a corresponding check to unmap_range, and this seems to be the source of the problem. This patch adds the missing pgd_none check, ensuring we don't try to access tables that don't exist. Original splat below: kvm [1]: Using HYP init bounce page @83fe94a000 kvm [1]: Cannot obtain GICH resource Unable to handle kernel paging request at virtual address ffff7f7fff000000 pgd = ffff800000770000 [ffff7f7fff000000] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc2+ #89 task: ffff8003eb500000 ti: ffff8003eb45c000 task.ti: ffff8003eb45c000 PC is at unmap_range+0x120/0x580 LR is at free_hyp_pgds+0xac/0xe4 pc : [<ffff80000009b768>] lr : [<ffff80000009cad8>] pstate: 80000045 sp : ffff8003eb45fbf0 x29: ffff8003eb45fbf0 x28: ffff800000736000 x27: ffff800000735000 x26: ffff7f7fff000000 x25: 0000000040000000 x24: ffff8000006f5000 x23: 0000000000000000 x22: 0000007fffffffff x21: 0000800000000000 x20: 0000008000000000 x19: 0000000000000000 x18: ffff800000648000 x17: ffff800000537228 x16: 0000000000000000 x15: 000000000000001f x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000020 x11: 0000000000000062 x10: 0000000000000006 x9 : 0000000000000000 x8 : 0000000000000063 x7 : 0000000000000018 x6 : 00000003ff000000 x5 : ffff800000744188 x4 : 0000000000000001 x3 : 0000000040000000 x2 : ffff800000000000 x1 : 0000007fffffffff x0 : 000000003fffffff Process swapper/0 (pid: 1, stack limit = 0xffff8003eb45c058) Stack: (0xffff8003eb45fbf0 to 0xffff8003eb460000) fbe0: eb45fcb0 ffff8003 0009cad8 ffff8000 fc00: 00000000 00000080 00736140 ffff8000 00736000 ffff8000 00000000 00007c80 fc20: 00000000 00000080 006f5000 ffff8000 00000000 00000080 00743000 ffff8000 fc40: 00735000 ffff8000 006d3030 ffff8000 006fe7b8 ffff8000 00000000 00000080 fc60: ffffffff 0000007f fdac1000 ffff8003 fd94b000 ffff8003 fda47000 ffff8003 fc80: 00502b40 ffff8000 ff000000 ffff7f7f fdec6000 00008003 fdac1630 ffff8003 fca0: eb45fcb0 ffff8003 ffffffff 0000007f eb45fd00 ffff8003 0009b378 ffff8000 fcc0: ffffffea 00000000 006fe000 ffff8000 00736728 ffff8000 00736120 ffff8000 fce0: 00000040 00000000 00743000 ffff8000 006fe7b8 ffff8000 0050cd48 00000000 fd00: eb45fd60 ffff8003 00096070 ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd20: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00000000 00000000 fd40: 00000ae0 00000000 006aa25c ffff8000 eb45fd60 ffff8003 0017ca44 00000002 fd60: eb45fdc0 ffff8003 0009a33c ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd80: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00735000 ffff8000 fda0: 006d3090 ffff8000 006aa25c ffff8000 00735000 ffff8000 006d3030 ffff8000 fdc0: eb45fdd0 ffff8003 000814c0 ffff8000 eb45fe50 ffff8003 006aaac4 ffff8000 fde0: 006ddd90 ffff8000 00000006 00000000 006d3000 ffff8000 00000095 00000000 fe00: 006a1e90 ffff8000 00735000 ffff8000 006d3000 ffff8000 006aa25c ffff8000 fe20: 00735000 ffff8000 006d3030 ffff8000 eb45fe50 ffff8003 006fac68 ffff8000 fe40: 00000006 00000006 fe293ee6 ffff8003 eb45feb0 ffff8003 004f8ee8 ffff8000 fe60: 004f8ed4 ffff8000 00735000 ffff8000 00000000 00000000 00000000 00000000 fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fea0: 00000000 00000000 00000000 00000000 00000000 00000000 000843d0 ffff8000 fec0: 004f8ed4 ffff8000 00000000 00000000 00000000 00000000 00000000 00000000 fee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffa0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000005 00000000 ffe0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Call trace: [<ffff80000009b768>] unmap_range+0x120/0x580 [<ffff80000009cad4>] free_hyp_pgds+0xa8/0xe4 [<ffff80000009b374>] kvm_arch_init+0x268/0x44c [<ffff80000009606c>] kvm_init+0x24/0x260 [<ffff80000009a338>] arm_init+0x18/0x24 [<ffff8000000814bc>] do_one_initcall+0x88/0x1a0 [<ffff8000006aaac0>] kernel_init_freeable+0x148/0x1e8 [<ffff8000004f8ee4>] kernel_init+0x10/0xd4 Code: 8b000263 92628479 d1000720 eb01001f (f9400340) ---[ end trace 3bc230562e926fa4 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jungseok Lee <jungseoklee85@gmail.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Steve Capper authored
commit 3d08c629 upstream. Commit: b8865767 ARM: KVM: user_mem_abort: support stage 2 MMIO page mapping introduced some code in user_mem_abort that failed to compile if STRICT_MM_TYPECHECKS was enabled. This patch fixes up the failing comparison. Signed-off-by:
Steve Capper <steve.capper@linaro.org> Reviewed-by:
Kim Phillips <kim.phillips@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Christoffer Dall authored
commit c3058d5d upstream. When creating or moving a memslot, make sure the IPA space is within the addressable range of the guest. Otherwise, user space can create too large a memslot and KVM would try to access potentially unallocated page table entries when inserting entries in the Stage-2 page tables. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> [ luis: backported to 3.16: used shannon's backport for 3.14 ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Ard Biesheuvel authored
commit 37b54408 upstream. Handle the potential NULL return value of find_vma_intersection() before dereferencing it. Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Vladimir Murzin authored
commit 37a34ac1 upstream. On some platforms with no power management capabilities, the hotplug implementation is allowed to return from a smp_ops.cpu_die() call as a function return. Upon a CPU onlining event, the KVM CPU notifier tries to reinstall the hyp stub, which fails on platform where no reset took place following a hotplug event, with the message: CPU1: smp_ops.cpu_die() returned, trying to resuscitate CPU1: Booted secondary processor Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x80409540 unexpected data abort in Hyp mode at: 0x80401fe8 unexpected HVC/SVC trap in Hyp mode at: 0x805c6170 since KVM code is trying to reinstall the stub on a system where it is already configured. To prevent this issue, this patch adds a check in the KVM hotplug notifier that detects if the HYP stub really needs re-installing when a CPU is onlined and skips the installation call if the stub is already in place, which means that the CPU has not been reset. Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Acked-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Joel Schopp authored
commit dbff124e upstream. The current aarch64 calculation for VTTBR_BADDR_MASK masks only 39 bits and not all the bits in the PA range. This is clearly a bug that manifests itself on systems that allocate memory in the higher address space range. [ Modified from Joel's original patch to be based on PHYS_MASK_SHIFT instead of a hard-coded value and to move the alignment check of the allocation to mmu.c. Also added a comment explaining why we hardcode the IPA range and changed the stage-2 pgd allocation to be based on the 40 bit IPA range instead of the maximum possible 48 bit PA range. - Christoffer ] Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Joel Schopp <joel.schopp@amd.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Christoffer Dall authored
commit 0fea6d76 upstream. The sgi values calculated in read_set_clear_sgi_pend_reg() and write_set_clear_sgi_pend_reg() were horribly incorrectly multiplied by 4 with catastrophic results in that subfunctions ended up overwriting memory not allocated for the expected purpose. This showed up as bugs in kfree() and the kernel complaining a lot of you turn on memory debugging. This addresses: http://marc.info/?l=kvm&m=141164910007868&w=2Reported-by:
Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Marc Zyngier authored
commit 71afaba4 upstream. As it stands, nothing prevents userspace from injecting an interrupt before the guest's GIC is actually initialized. This goes unnoticed so far (as everything is pretty much statically allocated), but ends up exploding in a spectacular way once we switch to a more dynamic allocation (the GIC data structure isn't there yet). The fix is to test for the "ready" flag in the VGIC distributor before trying to inject the interrupt. Note that in order to avoid breaking userspace, we have to ignore what is essentially an error. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> [ luis: backported to 3.16: used shannon's backport to 3.14 ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Ard Biesheuvel authored
commit a7d079ce upstream. The ISS encoding for an exception from a Data Abort has a WnR bit[6] that indicates whether the Data Abort was caused by a read or a write instruction. While there are several fields in the encoding that are only valid if the ISV bit[24] is set, WnR is not one of them, so we can read it unconditionally. Instead of fixing both implementations of kvm_is_write_fault() in place, reimplement it just once using kvm_vcpu_dabt_iswrite(), which already does the right thing with respect to the WnR bit. Also fix up the callers to pass 'vcpu' Acked-by:
Laszlo Ersek <lersek@redhat.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> [ luis: backported to 3.16: used shannon's backport to 3.14 ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Will Deacon authored
commit 1fa451bc upstream. vgic_ioaddr_overlap claims to return a bool, but in reality it returns an int. Shut sparse up by fixing the type signature. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Will Deacon authored
commit 18d45766 upstream. is_valid_cache returns true if the specified cache is valid. Unfortunately, if the parameter passed it out of range, we return -ENOENT, which ends up as true leading to potential hilarity. This patch returns false on the failure path instead. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Will Deacon authored
commit 4000be42 upstream. Running sparse results in a bunch of noisy address space mismatches thanks to the broken __percpu annotation on kvm_get_running_vcpus. This function returns a pcpu pointer to a pointer, not a pointer to a pcpu pointer. This patch fixes the annotation, which kills the warnings from sparse. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Will Deacon authored
commit 6951e48b upstream. Sparse kicks up about a type mismatch for kvm_target_cpu: arch/arm64/kvm/guest.c:271:25: error: symbol 'kvm_target_cpu' redeclared with different type (originally declared at ./arch/arm64/include/asm/kvm_host.h:45) - different modifiers so fix this by adding the missing const attribute to the function declaration. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Victor Kamensky authored
commit ba083d20 upstream. esr_el2 field of struct kvm_vcpu_fault_info has u32 type. It should be stored as word. Current code works in LE case because existing puts least significant word of x1 into esr_el2, and it puts most significant work of x1 into next field, which accidentally is OK because it is updated again by next instruction. But existing code breaks in BE case. Signed-off-by:
Victor Kamensky <victor.kamensky@linaro.org> Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Li Liu authored
commit af92394e upstream. HSCTLR.EE is defined as bit[25] referring to arm manual DDI0606C.b(p1590). Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Li Liu <john.liuli@huawei.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Alex Bennée authored
commit efd48cea upstream. I suspect this is a -ECUTPASTE fault from the initial implementation. If we don't declare the register ID to be KVM_REG_ARM64 the KVM_GET_ONE_REG implementation kvm_arm_get_reg() returns -EINVAL and hilarity ensues. The kvm/api.txt document describes all arm64 registers as starting with 0x60xx... (i.e KVM_REG_ARM64). Signed-off-by:
Alex Bennée <alex.bennee@linaro.org> Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Kim Phillips authored
commit b8865767 upstream. A userspace process can map device MMIO memory via VFIO or /dev/mem, e.g., for platform device passthrough support in QEMU. During early development, we found the PAGE_S2 memory type being used for MMIO mappings. This patch corrects that by using the more strongly ordered memory type for device MMIO mappings: PAGE_S2_DEVICE. Signed-off-by:
Kim Phillips <kim.phillips@linaro.org> Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Eric Auger authored
commit df6ce24f upstream. Currently when a KVM region is deleted or moved after KVM_SET_USER_MEMORY_REGION ioctl, the corresponding intermediate physical memory is not unmapped. This patch corrects this and unmaps the region's IPA range in kvm_arch_commit_memory_region using unmap_stage2_range. Signed-off-by:
Eric Auger <eric.auger@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Christoffer Dall authored
commit 4f853a71 upstream. unmap_range() was utterly broken, to quote Marc, and broke in all sorts of situations. It was also quite complicated to follow and didn't follow the usual scheme of having a separate iterating function for each level of page tables. Address this by refactoring the code and introduce a pgd_clear() function. Reviewed-by:
Jungseok Lee <jays.lee@samsung.com> Reviewed-by:
Mario Smarduch <m.smarduch@samsung.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Luis Henriques authored
This reverts commit 65342eab which is commit 97534127 upstream. This is being reverted because it fixes a regression that was introduced in 4.0 and does not affect 3.16 kernel. Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
- 18 May, 2015 1 commit
-
-
Luis Henriques authored
This reverts commit aba636b8 which is commit 6ada5c1e upstream. This is being reverted because it fixes a regression that was introduced in 4.0 and does not affect 3.16 kernel. Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: Beata Michalska <b.michalska@samsung.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
- 12 May, 2015 4 commits
-
-
Nathan Fontenot authored
commit f32393c9 upstream. The incorrect ordering of operations during cpu dlpar add results in invalid affinity for the cpu being added. The ibm,associativity property in the device tree is populated with all zeroes for the added cpu which results in invalid affinity mappings and all cpus appear to belong to node 0. This occurs because rtas configure-connector is called prior to making the rtas set-indicator calls. Phyp does not assign affinity information for a cpu until the rtas set-indicator calls are made to set the isolation and allocation state. Correct the order of operations to make the rtas set-indicator calls (done in dlpar_acquire_drc) before calling rtas configure-connector. Fixes: 1a8061c4 ("powerpc/pseries: Add kernel based CPU DLPAR handling") Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Benjamin Poirier authored
commit f94813f3 upstream. Signed-off-by:
Benjamin Poirier <bpoirier@suse.de> Fixes: 9e311e77 ("net/mlx4_en: Use affinity hint") Acked-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Nicolas Dichtel authored
commit 82199679 upstream. NLM_F_MULTI must be used only when a NLMSG_DONE message is sent. In fact, it is sent only at the end of a dump. Libraries like libnl will wait forever for NLMSG_DONE. Fixes: 37a393bc ("bridge: notify mdb changes via netlink") CC: Cong Wang <amwang@redhat.com> CC: Stephen Hemminger <stephen@networkplumber.org> CC: bridge@lists.linux-foundation.org Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Davide Italiano authored
commit 280227a7 upstream. fallocate() checks that the file is extent-based and returns EOPNOTSUPP in case is not. Other tasks can convert from and to indirect and extent so it's safe to check only after grabbing the inode mutex. Signed-off-by:
Davide Italiano <dccitaliano@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-