- 28 May, 2014 9 commits
-
-
Finn Thain authored
All three NCR5380 core driver implementations share the same NCR5380.h header file so they need to agree on certain macro definitions. The flag bit used by the NDEBUG_MERGING macro in atari_NCR5380 and sun3_NCR5380 collides with the bit used by NDEBUG_LISTS. Moreover, NDEBUG_ABORT appears in NCR5380.c so it should be defined in NCR5380.h rather than in each of the many drivers using that core. An undefined NDEBUG_ABORT macro caused compiler errors and led to dodgy workarounds in the core driver that can now be removed. (See commits f566a576 and 185a7a1c.) Move all of the NDEBUG_ABORT, NDEBUG_TAGS and NDEBUG_MERGING macro definitions into NCR5380.h where all the other NDEBUG macros live. Also, incorrect "#ifdef NDEBUG" becomes "#if NDEBUG" to fix the warning: drivers/scsi/mac_scsi.c: At top level: drivers/scsi/NCR5380.c:418: warning: 'NCR5380_print' defined but not used drivers/scsi/NCR5380.c:459: warning: 'NCR5380_print_phase' defined but not used The debugging code is now enabled when NDEBUG != 0. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Sam Creasey <sammy@sammy.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Finn Thain authored
All NCR5380 drivers already include the NCR5380.h header. Better to adopt those macros rather than have three variations on them. Moreover, the macros in NCR5380.h are preferable because the atari_NCR5380 and sun3_NCR5380 versions are inflexible. For example, they can't accomodate dprintk(NDEBUG_MAIN | NDEBUG_QUEUES, ...) Replace the *_PRINTK macros from atari_NCR5380.h and sun3_NCR5380.h with the equivalent macros from NCR5380.h. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Sam Creasey <sammy@sammy.net> Acked-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Finn Thain authored
All NCR5380 drivers already include the NCR5380.h header. Better to adopt those macros rather than have three variations on them. Moreover, the macros in NCR5380.h are preferable anyway: the atari_NCR5380 and sun3_NCR5380 versions are inflexible. For example, they can't accomodate NCR5380_dprint(NDEBUG_MAIN | NDEBUG_QUEUES, ...) Replace the NCR_PRINT* macros from atari_NCR5380.h and sun3_NCR5380.h with the equivalent macros from NCR5380.h. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Sam Creasey <sammy@sammy.net> Acked-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Finn Thain authored
There are three implementations of the core NCR5380 driver and three sets of debugging macro definitions. And all three implementations use the NCR5380.h header as well. Two of the definitions of the dprintk macro accept a variable argument list whereas the third does not. Standardize on the variable argument list. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Sam Creasey <sammy@sammy.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Finn Thain authored
The change from cmd->target to cmd->device->id was apparently the purpose of commit a7f25122 in kernel/git/tglx/history.git but some instances have been missed. Also fix the "NDEBUG_LAST_WRITE_SENT" and "NDEBUG_ALL" typo's. Also fix some format strings (%ul becomes %lu) that caused compiler warnings. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Sam Creasey <sammy@sammy.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Finn Thain authored
Only the NCR5380_dprint() macro should invoke the NCR5380_print() function. That's why NCR5380.c only defines the function #if NDEBUG. Use the standard macro. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Sam Creasey <sammy@sammy.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Finn Thain authored
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Sam Creasey <sammy@sammy.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Finn Thain authored
HOSTS_C is always undefined. There is no hosts.c anymore. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Sam Creasey <sammy@sammy.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Finn Thain authored
BOARD_NORMAL is completely unused and BOARD_NCR53C400 is used only by g_NCR5380 internally. Remove the unused definitions. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Sam Creasey <sammy@sammy.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
- 19 May, 2014 31 commits
-
-
Christoph Hellwig authored
Add an option to only transfer half the data for every n-th command. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Christoph Hellwig authored
Taken almost entirely from Nicholas Bellinger's scsi-mq conversion. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Maurizio Lombardi authored
In case of error, the bnx2fc_allocate_hash_table() didn't free all the memory it allocated. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Maurizio Lombardi authored
If bnx2fc_allocate_hash_table() for some reasons fails, it is possible that the hash_tbl_segments or the hash_tbl_pbl pointers are NULL. In this case bnx2fc_free_hash_table() will panic the system. this patch also fixes a memory leak, the hash_tbl_segments pointer was never freed. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Maurizio Lombardi authored
hash_table_size is not used by the bnx2fc_free_hash_table() function. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Joe Handzik authored
Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Joe Handzik authored
And while we're at it fix a magic number Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Joe Handzik authored
Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Joe Handzik authored
Checking for a NULL return from a kzalloc call in hpsa_get_pdisk_of_ioaccel2. Signed-off-by: Scott Teel <scott.teel@hp.com> Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Suresh Thiagarajan authored
Checking return value for the memory allocattion and freeing it while exiting the function Signed-off-by: Viswas G <Viswas.G@pmcs.com> Signed-off-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Ming Lei authored
Access to tgt->req_vq is strictly serialized by spin_lock of tgt->tgt_lock, so the ACCESS_ONCE() isn't necessary. smp_read_barrier_depends() in virtscsi_req_done was introduced to order reading req_vq and decreasing tgt->reqs, but it isn't needed now because req_vq is read from scsi->req_vqs[vq->index - VIRTIO_SCSI_VQ_BASE] instead of tgt->req_vq, so remove the unnecessary barrier. Also remove related comment about the barrier. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
James Smart authored
Add a memory barrier to ensure the valid bit is read before any of the cqe payload is read. This fixes an issue seen on Power where the cqe payload was getting loaded before the valid bit. When this occurred, we saw an iotag out of range error when a command completed, but since the iotag looked invalid the command didn't get completed to scsi core. Later we hit the command timeout, attempted to abort the command, then waited for the aborted command to get returned. Since the adapter already returned the command, we timeout waiting, and end up escalating EEH all the way to host reset. This patch fixes this issue. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Smart <james.smart@emulex.com> --- lpfc_sli.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Finn Thain authored
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Michael Schmitz authored
[Resend of earlier patch - added equivalent changes to sun3 NCR5380 code] The abort/reset lowlevel return codes had changed with the new error SCSI handling - update Atari and Sun3 NCR5380 drivers to reflect this. Change reset handling for Atari to clear queues only, do not attempt to call done() on each command aborted by the reset. The EH code should do that for us. Queues _must_ be cleared, otherwise atari_scsi_bus_reset will not release the ST-DMA lock, deadlocking further error recovery. Update the Sun3 NCR5380 driver as well - the Sun3 driver was derived from the Atari one. Kudos to Finn Thain for the Sun3 part and cleaning up the header files. After the header cleanup, the initio.h include (!) can be dropped from sun3_scsi.h now. Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Sam Creasey <sammy@sammy.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: James E.J. Bottomley <JBottomley@parallels.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Mathias Krause authored
The format strings for various printk()s make use of a temporary variable that is declared 'static'. This is probably not intended, so fix those. Found in the PaX patch, written by the PaX Team. Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Hannes Reinecke <hare@suse.de> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: PaX Team <pageexec@freemail.hu> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Marek Vasut authored
Minor fix for a message in the driver so that it matches the function name. Signed-off-by: Marek Vasut <marex@denx.de> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Alexey Khoroshilov authored
bfa_fcb_pbc_vport_create() is called only from bfa_fcs_pbc_vport_init(), that is called only from bfad_drv_start() with bfad_lock spinlock held. So the patch replaces GFP_KERNEL with GFP_ATOMIC to avoid sleeping in atomic spinlock context. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Vikas Chaudhary authored
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Adheer Chandravanshi authored
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Adheer Chandravanshi authored
Fix following smatch warning:- drivers/scsi/qla4xxx/ql4_os.c:1752 qla4xxx_get_ep_param() warn: variable dereferenced before check 'qla_ep' (see line 1745) Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Nilesh Javali authored
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Nilesh Javali authored
Issue: modprobe qla4xxx is killed by systemd due to timeout. Solution: The exporting of sysfs DDBs from qla4xxx_probe_adapter added delay of approximately 15s due to which system-udevd killed the modprobe of the driver. Added fix to export the sysfs DDBs from the DPC handler. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Tej Parkash authored
Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Vikas Chaudhary authored
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Vikas Chaudhary authored
Use correct goto statement to free dma memory in case of failure in function qla4_84xx_config_acb() Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Vikas Chaudhary authored
Issue: System crash while target discovery for ISP40XX Root cause: Function qla4xxx_init_rings() is not called for ISP40XX Fix: Call function qla4xxx_init_rings() for ISP40XX from qla4xxx_start_firmware(). Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Vikas Chaudhary authored
Check for correct return status in function - qla4_8xxx_minidump_pex_dma_read Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Vikas Chaudhary authored
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Tej Parkash authored
Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Tej Parkash authored
Updated driver with new opcode (RDDFE, RDMDIO and POLLWR) which are added with latest firmware minidump template Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Tej Parkash authored
Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
-