- 29 Sep, 2018 2 commits
-
-
David S. Miller authored
Merge branch 'ieee802154-for-davem-2018-09-28' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2018-09-28 An update from ieee802154 for your *net* tree. Some cleanup patches throughout the drivers from the Huawei tag team Yue Haibing and Zhong Jiang. Xue is replacing some magic numbers with defines in his mcr20a driver. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller authored
David Howells says: ==================== rxrpc: Fixes Here are some miscellaneous fixes for AF_RXRPC: (1) Remove a duplicate variable initialisation. (2) Fix one of the checks made when we decide to set up a new incoming service call in which a flag is being checked in the wrong field of the packet header. This check is abstracted out into helper functions. (3) Fix RTT gathering. The code has been trying to make use of socket timestamps, but wasn't actually enabling them. The code has also been recording a transmit time for the outgoing packet for which we're going to measure the RTT after sending the message - but we can get the incoming packet before we get to that and record a negative RTT. (4) Fix the emission of BUSY packets (we are emitting ABORTs instead). (5) Improve error checking on incoming packets. (6) Try to fix a bug in new service call handling whereby a BUG we should never be able to reach somehow got triggered. Do this by moving much of the checking as early as possible and not repeating it later (depends on (5) above). (7) Fix the sockopts set on a UDP6 socket to include the ones set on a UDP4 socket so that we receive UDP4 errors and packet-too-large notifications too. (8) Fix the distribution of errors so that we do it at the point of receiving an error in the UDP callback rather than deferring it thereby cutting short any transmissions that would otherwise occur in the window. ==================== Signed-off-by:
-
- 28 Sep, 2018 26 commits
-
-
David S. Miller authored
Eric Dumazet says: ==================== netpoll: second round of fixes. As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture, showing one ksoftirqd eating all cycles can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. It seems that all networking drivers that do use NAPI for their TX completions, should not provide a ndo_poll_controller() : Most NAPI drivers have netpoll support already handled in core networking stack, since netpoll_poll_dev() uses poll_napi(dev) to iterate through registered NAPI contexts for a device. First patch is a fix in poll_one_napi(). Then following patches take care of ten drivers. ==================== Signed-off-by: -
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ibmvnic uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. ibmvnic_netpoll_controller() was completely wrong anyway, as it was scheduling NAPI to service RX queues (instead of TX), so I doubt netpoll ever worked on this driver. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Cc: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. sfc-falcon uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. sfc uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ena uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. netxen uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. qlcnic uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. virto_net uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. hns uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ehea uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. hinic uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Note that hinic_netpoll() was incorrectly scheduling NAPI on both RX and TX queues. Signed-off-by:
-
Eric Dumazet authored
Since we do no longer require NAPI drivers to provide an ndo_poll_controller(), napi_schedule() has not been done before poll_one_napi() invocation. So testing NAPI_STATE_SCHED is likely to cause early returns. While we are at it, remove outdated comment. Note to future bisections : This change might surface prior bugs in drivers. See commit 73f21c65 ("bnxt_en: Fix TX timeout during netpoll.") for one occurrence. Fixes: ac3d9dd0 ("netpoll: make ndo_poll_controller() optional") Signed-off-by:
Song Liu <songliubraving@fb.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2018-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== More patches than I'd like perhaps, but each seems reasonable: * two new spectre-v1 mitigations in nl80211 * TX status fix in general, and mesh in particular * powersave vs. offchannel fix * regulatory initialization fix * fix for a queue hang due to a bad return value * allocate TXQs for active monitor interfaces, fixing my earlier patch to avoid unnecessary allocations where I missed this case needed them * fix TDLS data frames priority assignment * fix scan results processing to take into account duplicate channel numbers (over different operating classes, but we don't necessarily know the operating class) * various hwsim fixes for radio destruction and new radio announcement messages * remove an extraneous kernel-doc line ==================== Signed-off-by:
-
Sudarsana Reddy Kalluru authored
The structure shared between driver and the management FW (mfw) differ in sizes. This would lead to issues when driver try to access the structure members which are not-aligned with the mfw copy e.g., data_ptr usage in the case of mfw_tlv request. Align the driver structure with mfw copy, add reserved field(s) to driver structure for the members not used by the driver. Fixes: dd006921 ("qed: Add MFW interfaces for TLV request support.) Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com>
-
Sudarsana Reddy Kalluru authored
Signed-off-by:
Ameen Rahman <Ameen.Rahman@cavium.com> Signed-off-by:
-
Stephen Hemminger authored
I haven't been doing reviews only but not active development on bridge code for several years. Roopa and Nikolay have been doing most of the new features and have agreed to take over as new co-maintainers. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: fixes 2019-09-26 please apply two qeth patches for -net. The first is a trivial cleanup required for patch #2 by Jean, which fixes a potential endless loop. ==================== Signed-off-by: -
Jean Delvare authored
Functions qeth_get_ipa_msg and qeth_get_ipa_cmd_name are modifying the last member of global arrays without any locking that I can see. If two instances of either function are running at the same time, it could cause a race ultimately leading to an array overrun (the contents of the last entry of the array is the only guarantee that the loop will ever stop). Performing the lookups without modifying the arrays is admittedly slower (two comparisons per iteration instead of one) but these are operations which are rare (should only be needed in error cases or when debugging, not during successful operation) and it seems still less costly than introducing a mutex to protect the arrays in question. As a side bonus, it allows us to declare both arrays as const data. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Julian Wiedmann <jwi@linux.ibm.com> Cc: Ursula Braun <ubraun@linux.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
zhong jiang authored
Use the common code ARRAY_SIZE macro instead of a private implementation. Reviewed-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
David Howells authored
Fix error distribution by immediately delivering the errors to all the affected calls rather than deferring them to a worker thread. The problem with the latter is that retries and things can happen in the meantime when we want to stop that sooner. To this end: (1) Stop the error distributor from removing calls from the error_targets list so that peer->lock isn't needed to synchronise against other adds and removals. (2) Require the peer's error_targets list to be accessed with RCU, thereby avoiding the need to take peer->lock over distribution. (3) Don't attempt to affect a call's state if it is already marked complete. Signed-off-by:David Howells <dhowells@redhat.com>
-
David Howells authored
It seems that enabling IPV6_RECVERR on an IPv6 socket doesn't also turn on IP_RECVERR, so neither local errors nor ICMP-transported remote errors from IPv4 peer addresses are returned to the AF_RXRPC protocol. Make the sockopt setting code in rxrpc_open_socket() fall through from the AF_INET6 case to the AF_INET case to turn on all the AF_INET options too in the AF_INET6 case. Fixes: f2aeed3a ("rxrpc: Fix error reception on AF_INET6 sockets") Signed-off-by:
-
David Howells authored
Make the following changes to improve the robustness of the code that sets up a new service call: (1) Cache the rxrpc_sock struct obtained in rxrpc_data_ready() to do a service ID check and pass that along to rxrpc_new_incoming_call(). This means that I can remove the check from rxrpc_new_incoming_call() without the need to worry about the socket attached to the local endpoint getting replaced - which would invalidate the check. (2) Cache the rxrpc_peer struct, thereby allowing the peer search to be done once. The peer is passed to rxrpc_new_incoming_call(), thereby saving the need to repeat the search. This also reduces the possibility of rxrpc_publish_service_conn() BUG()'ing due to the detection of a duplicate connection, despite the initial search done by rxrpc_find_connection_rcu() having turned up nothing. This BUG() shouldn't ever get hit since rxrpc_data_ready() *should* be non-reentrant and the result of the initial search should still hold true, but it has proven possible to hit. I *think* this may be due to __rxrpc_lookup_peer_rcu() cutting short the iteration over the hash table if it finds a matching peer with a zero usage count, but I don't know for sure since it's only ever been hit once that I know of. Another possibility is that a bug in rxrpc_data_ready() that checked the wrong byte in the header for the RXRPC_CLIENT_INITIATED flag might've let through a packet that caused a spurious and invalid call to be set up. That is addressed in another patch. (3) Fix __rxrpc_lookup_peer_rcu() to skip peer records that have a zero usage count rather than stopping and returning not found, just in case there's another peer record behind it in the bucket. (4) Don't search the peer records in rxrpc_alloc_incoming_call(), but rather either use the peer cached in (2) or, if one wasn't found, preemptively install a new one. Fixes: 8496af50 ("rxrpc: Use RCU to access a peer's service connection tree") Signed-off-by: -
David Howells authored
Do more up-front checking on incoming packets to weed out invalid ones and also ones aimed at services that we don't support. Whilst we're at it, replace the clearing of call and skew if we don't find a connection with just initialising the variables to zero at the top of the function. Signed-off-by: -
David Howells authored
In the input path, a received sk_buff can be marked for rejection by setting RXRPC_SKB_MARK_* in skb->mark and, if needed, some auxiliary data (such as an abort code) in skb->priority. The rejection is handled by queueing the sk_buff up for dealing with in process context. The output code reads the mark and priority and, theoretically, generates an appropriate response packet. However, if RXRPC_SKB_MARK_BUSY is set, this isn't noticed and an ABORT message with a random abort code is generated (since skb->priority wasn't set to anything). Fix this by outputting the appropriate sort of packet. Also, whilst we're at it, most of the marks are no longer used, so remove them and rename the remaining two to something more obvious. Fixes: 248f219c ("rxrpc: Rewrite the data and ack handling code") Signed-off-by:
-
David Howells authored
Fix RTT information gathering in AF_RXRPC by the following means: (1) Enable Rx timestamping on the transport socket with SO_TIMESTAMPNS. (2) If the sk_buff doesn't have a timestamp set when rxrpc_data_ready() collects it, set it at that point. (3) Allow ACKs to be requested on the last packet of a client call, but not a service call. We need to be careful lest we undo: bf7d620a Author: David Howells <dhowells@redhat.com> Date: Thu Oct 6 08:11:51 2016 +0100 rxrpc: Don't request an ACK on the last DATA packet of a call's Tx phase but that only really applies to service calls that we're handling, since the client side gets to send the final ACK (or not). (4) When about to transmit an ACK or DATA packet, record the Tx timestamp before only; don't update the timestamp afterwards. (5) Switch the ordering between recording the serial and recording the timestamp to always set the serial number first. The serial number shouldn't be seen referenced by an ACK packet until we've transmitted the packet bearing it - so in the Rx path, we don't need the timestamp until we've checked the serial number. Fixes: cf1a6474 ("rxrpc: Add per-peer RTT tracker") Signed-off-by: -
David Howells authored
There's a check in rxrpc_data_ready() that's checking the CLIENT_INITIATED flag in the packet type field rather than in the packet flags field. Fix this by creating a pair of helper functions to check whether the packet is going to the client or to the server and use them generally. Fixes: 248f219c ("rxrpc: Rewrite the data and ack handling code") Signed-off-by:
-
- 27 Sep, 2018 12 commits
-
-
Xue Liu authored
The combination of defined constants are used to present the state of IRQ so the magic numbers has been replaced. This is a simple coding style change which should have no impact on runtime code execution. Signed-off-by:
Xue Liu <liuxuenetmail@gmail.com> Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org>
-
David Howells authored
rxrpc_find_connection_rcu() initialises variable k twice with the same information. Remove one of the initialisations. Signed-off-by: -
zhong jiang authored
debugfs_remove has taken the IS_ERR into account. Just remove the unnecessary condition. Signed-off-by:
-
Masashi Honma authored
Use array_index_nospec() to sanitize i with respect to speculation. Note that the user doesn't control i directly, but can make it out of bounds by not finding a threshold in the array. Signed-off-by:
Masashi Honma <masashi.honma@gmail.com> [add note about user control, as explained by Masashi] Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Maciej Żenczykowski authored
(fix documentation and sysctl access to treat it as such) Tested: # zcat /proc/config.gz | egrep ^CONFIG_HZ CONFIG_HZ_1000=y CONFIG_HZ=1000 # echo $[(1<<32)/1000 + 1] | tee /proc/sys/net/ipv4/tcp_probe_interval 4294968 tee: /proc/sys/net/ipv4/tcp_probe_interval: Invalid argument # echo $[(1<<32)/1000] | tee /proc/sys/net/ipv4/tcp_probe_interval 4294967 # echo 0 | tee /proc/sys/net/ipv4/tcp_probe_interval # echo -1 | tee /proc/sys/net/ipv4/tcp_probe_interval -1 tee: /proc/sys/net/ipv4/tcp_probe_interval: Invalid argument Signed-off-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
-
Michael Chan authored
The current netpoll implementation in the bnxt_en driver has problems that may miss TX completion events. bnxt_poll_work() in effect is only handling at most 1 TX packet before exiting. In addition, there may be in flight TX completions that ->poll() may miss even after we fix bnxt_poll_work() to handle all visible TX completions. netpoll may not call ->poll() again and HW may not generate IRQ because the driver does not ARM the IRQ when the budget (0 for netpoll) is reached. We fix it by handling all TX completions and to always ARM the IRQ when we exit ->poll() with 0 budget. Also, the logic to ACK the completion ring in case it is almost filled with TX completions need to be adjusted to take care of the 0 budget case, as discussed with Eric Dumazet <edumazet@google.com> Reported-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Hangbin Liu authored
When add vxlan ttl inherit support, I forgot to fill it when dump vlxan info. Fix it now. Fixes: 72f6d71e ("vxlan: add ttl inherit support") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Andrew Lunn authored
A HWMON device is only registered is the SFP module supports the diagnostic page and is complient to SFF8472. Don't unconditionally unregister the hwmon device when the SFP module is remove, otherwise we access data structures which don't exist. Reported-by:
Florian Fainelli <f.fainelli@gmail.com> Fixes: 1323061a ("net: phy: sfp: Add HWMON support for module sensors") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
-
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another. drivers/net/ethernet/qlogic/qed/qed_iwarp.c:1713:25: warning: implicit conversion from enumeration type 'enum tcp_ip_version' to different enumeration type 'enum qed_tcp_ip_version' [-Wenum-conversion] cm_info->ip_version = TCP_IPV4; ~ ^~~~~~~~ drivers/net/ethernet/qlogic/qed/qed_iwarp.c:1733:25: warning: implicit conversion from enumeration type 'enum tcp_ip_version' to different enumeration type 'enum qed_tcp_ip_version' [-Wenum-conversion] cm_info->ip_version = TCP_IPV6; ~ ^~~~~~~~ 2 warnings generated. Use the appropriate values from the expected type, qed_tcp_ip_version: TCP_IPV4 = QED_TCP_IPV4 = 0 TCP_IPV6 = QED_TCP_IPV6 = 1 Link: https://github.com/ClangBuiltLinux/linux/issues/125Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns when a constant is used in a boolean context as it thinks a bitwise operation may have been intended. drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand] if (!p_iov->b_pre_fp_hsi && ^ drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: note: use '&' for a bitwise operation if (!p_iov->b_pre_fp_hsi && ^~ & drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: note: remove constant to silence this warning if (!p_iov->b_pre_fp_hsi && ~^~ 1 warning generated. This has been here since commit 1fe614d1 ("qed: Relax VF firmware requirements") and I am not entirely sure why since 0 isn't a special case. Just remove the statement causing Clang to warn since it isn't required. Link: https://github.com/ClangBuiltLinux/linux/issues/126Signed-off-by: -
Mahesh Bandewar authored
Syzkaller reported this on a slightly older kernel but it's still applicable to the current kernel - ====================================================== WARNING: possible circular locking dependency detected 4.18.0-next-20180823+ #46 Not tainted ------------------------------------------------------ syz-executor4/26841 is trying to acquire lock: 00000000dd41ef48 ((wq_completion)bond_dev->name){+.+.}, at: flush_workqueue+0x2db/0x1e10 kernel/workqueue.c:2652 but task is already holding lock: 00000000768ab431 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline] 00000000768ab431 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4708 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (rtnl_mutex){+.+.}: __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088 rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77 bond_netdev_notify drivers/net/bonding/bond_main.c:1310 [inline] bond_netdev_notify_work+0x44/0xd0 drivers/net/bonding/bond_main.c:1320 process_one_work+0xc73/0x1aa0 kernel/workqueue.c:2153 worker_thread+0x189/0x13c0 kernel/workqueue.c:2296 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 -> #1 ((work_completion)(&(&nnw->work)->work)){+.+.}: process_one_work+0xc0b/0x1aa0 kernel/workqueue.c:2129 worker_thread+0x189/0x13c0 kernel/workqueue.c:2296 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 -> #0 ((wq_completion)bond_dev->name){+.+.}: lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901 flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655 drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820 destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155 __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138 bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734 register_netdevice+0x337/0x1100 net/core/dev.c:8410 bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453 rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115 __sys_sendmsg+0x11d/0x290 net/socket.c:2153 __do_sys_sendmsg net/socket.c:2162 [inline] __se_sys_sendmsg net/socket.c:2160 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: (wq_completion)bond_dev->name --> (work_completion)(&(&nnw->work)->work) --> rtnl_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock((work_completion)(&(&nnw->work)->work)); lock(rtnl_mutex); lock((wq_completion)bond_dev->name); *** DEADLOCK *** 1 lock held by syz-executor4/26841: stack backtrace: CPU: 1 PID: 26841 Comm: syz-executor4 Not tainted 4.18.0-next-20180823+ #46 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_circular_bug.isra.34.cold.55+0x1bd/0x27d kernel/locking/lockdep.c:1222 check_prev_add kernel/locking/lockdep.c:1862 [inline] check_prevs_add kernel/locking/lockdep.c:1975 [inline] validate_chain kernel/locking/lockdep.c:2416 [inline] __lock_acquire+0x3449/0x5020 kernel/locking/lockdep.c:3412 lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901 flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655 drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820 destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155 __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138 bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734 register_netdevice+0x337/0x1100 net/core/dev.c:8410 bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453 rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115 __sys_sendmsg+0x11d/0x290 net/socket.c:2153 __do_sys_sendmsg net/socket.c:2162 [inline] __se_sys_sendmsg net/socket.c:2160 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457089 Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f2df20a5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f2df20a66d4 RCX: 0000000000457089 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 0000000000930140 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000004d40b8 R14: 00000000004c8ad8 R15: 0000000000000001 Signed-off-by:Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Mahesh Bandewar authored
Commit b89f04c6 ("bonding: deliver link-local packets with skb->dev set to link that packets arrived on") changed the behavior of how link-local-multicast packets are processed. The change in the behavior broke some legacy use cases where these packets are expected to arrive on bonding master device also. This patch passes the packet to the stack with the link it arrived on as well as passes to the bonding-master device to preserve the legacy use case. Fixes: b89f04c6 ("bonding: deliver link-local packets with skb->dev set to link that packets arrived on") Reported-by:
Michal Soltys <soltys@ziu.info> Signed-off-by:
-
