There is no need for of_find_spi_cs_gpio() to be different from other
quirks: the only variant of property actually used in DTS is "gpios"
(plural) so we can use of_get_named_gpiod_flags() instead of recursing
into of_find_gpio() again.

This will allow us consolidate quirk handling down the road.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

We should not ignore index passed into of_find_gpio() when handling
quirks. While in practice this change will not have any effect, it
will allow consolidate quirk handling.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

The ws16c48 module calls devm_request_irq() for each device. If the
number of irq passed to the module does not match the number of base, a
default value of 0 is passed to devm_request_irq(). IRQ 0 is probably
not what the user wants, so utilize the module_isa_driver_with_irq macro
to ensure the number of irq matches the number of base.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

The 104-idio-16 module calls devm_request_irq() for each device. If the
number of irq passed to the module does not match the number of base, a
default value of 0 is passed to devm_request_irq(). IRQ 0 is probably
not what the user wants, so utilize the module_isa_driver_with_irq macro
to ensure the number of irq matches the number of base.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

The 104-idi-48 module calls devm_request_irq() for each device. If the
number of irq passed to the module does not match the number of base, a
default value of 0 is passed to devm_request_irq(). IRQ 0 is probably
not what the user wants, so utilize the module_isa_driver_with_irq macro
to ensure the number of irq matches the number of base.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

The 104-dio-48e module calls devm_request_irq() for each device. If the
number of irq passed to the module does not match the number of base, a
default value of 0 is passed to devm_request_irq(). IRQ 0 is probably
not what the user wants, so utilize the module_isa_driver_with_irq macro
to ensure the number of irq matches the number of base.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

The 104-quad-8 module calls devm_request_irq() for each device. If the
number of irq passed to the module does not match the number of base, a
default value of 0 is passed to devm_request_irq(). IRQ 0 is probably
not what the user wants, so utilize the module_isa_driver_with_irq macro
to ensure the number of irq matches the number of base.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Several ISA drivers feature IRQ support that can configured via an "irq"
array module parameter. This array typically matches directly with the
respective "base" array module parameter. To reduce code repetition, a
module_isa_driver_with_irq helper macro is introduced to provide a check
ensuring that the number of "irq" passed to the module matches with the
respective number of "base".
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Add support for the NXP PCAL6534. This device is broadly a 34-bit version
of the PCAL6524. However, whilst the registers are broadly what you'd
expect for a 34-bit version of the PCAL6524, the spacing of the registers
has been compacted. This has the unfortunate effect of breaking the bit
shift based mechanism that is employed to work out register locations used
by the other chips supported by this driver. To accommodate ths, callback
functions have been added to allow alterate implementations of
pca953x_recalc_addr() and pca953x_check_register() for the PCAL6534.

Datasheet: https://www.nxp.com/docs/en/data-sheet/PCAL6534.pdf
Datasheet: https://www.diodes.com/assets/Datasheets/PI4IOE5V6534Q.pdfSigned-off-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

A later patch in the series adds support for a further chip type that
shares some similarity with the PCA953X_TYPE. In order to keep the logic
simple, swap over the if and else portions where checks are made against
PCA953X_TYPE and instead check for PCA957X_TYPE.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

A previous fix, commit dc87f6dd ("gpio: pca953x: Fix
pca953x_gpio_set_config"), identified that pinconf_to_config_param() needed
to be used to isolate the config_param from the pinconf in
pca953x_gpio_set_config(). This fix however did not consider that this
would also be needed in pca953x_gpio_set_pull_up_down() to which it passes
this config.

Perform a similar call in pca953x_gpio_set_pull_up_down() to isolate the
configuration parameter there as well, rather than passing it from
pca953x_gpio_set_config() as the configuration argument may also be needed
in pca953x_gpio_set_pull_up_down() at a later date.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

The NXP PCAL6534 is a 34-bit I2C I/O expander similar to the PCAL6524. The
Diodes PI4IOE5V6534Q is a functionally identical chip provided by Diodes
Inc.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Diodes Incorporated is a manufacturer of application specific standard
products within the discrete, logic, analog, and mixed-signal semiconductor
markets.

https://www.diodes.com/Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Mt7621 SoC GPIO driver is a platform driver so we can directly use
'platform_get_irq' instead of 'irq_of_parse_and_map'.
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

The NXP PCAL6408 is the 8-bit version of PCAL6416.
Signed-off-by: Nate Drude <nate.d@variscite.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

The NXP PCAL6408 is the 8-bit version of PCAL6416.
Signed-off-by: Nate Drude <nate.d@variscite.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Document support for the GPIO controller blocks in the Renesas R-Car
V4H (R8A779G0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

When EXAR xr17v35x chips are cascaded in order to access the MPIO registers
(part of the Device Configuration Registers) of the secondary chips, an offset
needs to be applied based on the number of primary chip's UART channels.
Signed-off-by: Qingtao Cao <qingtao.cao@digi.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

There are no external users of fwnode_get_named_gpiod() anymore, so
let's stop exporting it and mark it as static.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Merge tag 'platform-drivers-x86-simatec-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 into gpio/for-next

Tag (immutable branch) for:
v6.0-rc1 + "[PATCH v6 0/7] add support for another simatic board" series
for merging into the gpio, leds and pdx86 subsystems.

This adds support for the Siemens Simatic IPC427G. A board which
basically works like the 227G added in a previous patch. So all there is
to do is to add the station_id and make it take all the 227G branches.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20220825104422.14156-8-henning.schild@siemens.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Just load the watchdog module, after having identified that machine.
That watchdog module does not have any autoloading support.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20220825104422.14156-7-henning.schild@siemens.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

This adds support of the Siemens Simatic IPC227G. Its LEDs are connected
to GPIO pins provided by the gpio-f7188x module. We make sure that
gets loaded, if not enabled in the kernel config no LED support will be
available.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20220825104422.14156-6-henning.schild@siemens.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

So that drivers building on top can find those pins with GPIO_LOOKUP
helpers.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220825104422.14156-5-henning.schild@siemens.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Add GPIO support for Nuvoton NCT6116 chip. Nuvoton SuperIO chips are
very similar to the ones from Fintek. In other subsystems they also
share drivers and are called a family of drivers.

For the GPIO subsystem the only difference is that the direction bit is
reversed and that there is only one data bit per pin. On the SuperIO
level the logical device is another one.

On a chip level we do not have a manufacturer ID to check and also no
revision.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220825104422.14156-4-henning.schild@siemens.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Subsequent patches will touch that file, apply some nice to have style
changes before actually adding functional changes.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220825104422.14156-3-henning.schild@siemens.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Subsequent patches will touch that file, apply some nice to have style
changes before actually adding functional changes.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220825104422.14156-2-henning.schild@siemens.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

STMPE driver does not require a specific node name anymore, only the
compatible is checked, update binding according to this.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

The SCU firmware on i.MX8 platforms provides a set of APIs to
control the GPIO PINs on the SCU domain. This patch implements the
standard GPIO driver interface to access those PINs on the
SCU domain over the SCU APIs.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Add the description for imx-scu gpio subnode.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Add binding document for the imx scu gpio driver.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

The SD card and eMMC on PolarFire SoC are sometimes muxed using a GPIO
by the bootloader. Add a hog child property to facilitate this.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Follow commit dbd1c54f ("gpio: Bulk conversion to
generic_handle_domain_irq()").
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

The UCB1400 implements a GPIO driver so it needs to include the
<linux/gpio/driver.h> header, not the legacy <linux/gpio.h> header.
Compile tested on pxa_defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema.  This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.

Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Convert Xilinx axi gpio binding documentation to YAML.
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
have gfp_types.h for this.

Fixes powerpc allmodconfig build:

   In file included from include/linux/nodemask.h:97,
                    from include/linux/mmzone.h:17,
                    from include/linux/gfp.h:7,
                    from include/linux/radix-tree.h:12,
                    from include/linux/idr.h:15,
                    from include/linux/kernfs.h:12,
                    from include/linux/sysfs.h:16,
                    from include/linux/kobject.h:20,
                    from include/linux/pci.h:35,
                    from arch/powerpc/kernel/prom_init.c:24:
   include/linux/random.h: In function 'add_latent_entropy':
>> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
      25 |         add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
         |                                              ^~~~~~~~~~~~~~
         |                                              add_latent_entropy
   include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <lkp@intel.com>
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull vfs lseek fix from Al Viro:
 "Fix proc_reg_llseek() breakage. Always had been possible if somebody
  left NULL ->proc_lseek, became a practical issue now"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  take care to handle NULL ->proc_lseek()

Easily done now, just by clearing FMODE_LSEEK in ->f_mode
during proc_reg_open() for such entries.

Fixes: 868941b1 "fs: remove no_llseek"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>