No one is using the API neither in the actual staging tree nor in the
downstream tree (https://github.com/raspberrypi/linux).
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The implementation of both IOCTLS was the same except for one function
call. This joins both implementations and updates the code to avoid
unneeded indentations.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function is overly complicated for what it's ultimately achieving.
It's simply filling up a structure.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To comply with checkpatch.

CHECK: Lines should not end with a '('
+u8 rtl_mrate_idx_to_arfr_id(
Signed-off-by: Ricardo Silva <ricsilvs1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some parameters are aligned with parentheses.
Some parentheses was opened at end of line.
Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no clock driver for ralink mips and clk_enable
are no-ops for this architecture. This has been also tested
without using clocks and seems to work so avoid to use them
in this driver.

Fixes: ad9c87e1: "staging: mt7621-pci: parse and init
port data from device tree"
Reported-by: NeilBrown <neil@brown.name>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Depending of chip revision reset lines are inverted. It is also
necessary to read PCIE_FTS_NUM register before enabling the phy.
Hence update the code to achieve this.

Fixes: 745eeeac ("staging: mt7621-pci: factor out 'mt7621_pcie_enable_port' function")
Reported-by: NeilBrown <neil@brown.name>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sysctl register are already claimed by palmbus, so
pci fails to claim it. Device tree has been updated to not
use it at all with pcie. Update bindings documentation.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sysctl register are already claimed by palmbus, so
pci fails to claim it. Remove registers accordly from DT
bindings.

Fixes: 624c5227: staging: mt7621-dts: add sysctl registers base address to pcie
Reported-by: NeilBrown <neil@brown.name>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sysctl register are already claimed by palmbus, so
pci fails to claim it. The best way to access the sysc registers
is to use rt_sysc_[rwm]32().

Fixes: 89e9f6e6: staging: mt7621-pci: remap and use sysctl from device tree
Reported-by: NeilBrown <neil@brown.name>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a test for successful call to cdev_alloc() to avoid
potential null dereference. Issue reported by smatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Fixes: 874bcba6 ("staging: pi433: New driver")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The null check on &padapter->registrypriv is redundant since registrypriv
is a struct inside padapter and can never be null, so the check is always
true.  we may remove it.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
CC: devel@driverdev.osuosl.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup lines over 80 characters by replacing tabs with spaces
or adding appropriate line breaks.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct indentation to clear a checkpatch warning.
WARNING: suspect code indent for conditional statements (8, 24)
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove return from a void function to clear a checkpatch warning.
WARNING: void function return statements are not generally useful
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor if else statement to clear checkpatch warnings.
WARNING: else is not generally useful after a break or return
WARNING: line over 80 characters
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace tabs with spaces, remove spaces, remove blank lines
and break lines appropriatly in declarations.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function rtw_android_set_block() just returns zero. The only user
is the function rtw_android_priv_cmd(). The variable bytes_written is
initialized to zero and not changed before the use of
rtw_android_set_block(). Remove rtw_android_set_block() and it's only
use.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use __func__ instead of hardcoded function names.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary parentheses reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup remaining comparsions to true.
if (x == true) -> if (x)
if (x != true) -> if (!x)
if (!x == true) -> if (!x)
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Issue found by checkpatch.

CHECK: Prefer kernel type 'u32' over 'uint32_t'
+static const uint32_t vbox_cursor_plane_formats[] = {

CHECK: Prefer kernel type 'u32' over 'uint32_t'
+static const uint32_t vbox_primary_plane_formats[] = {

CHECK: Prefer kernel type 'u32' over 'uint32_t'
+       const uint32_t *formats;
Signed-off-by: Ricardo Reis Marques Silva <ricardormsilva93@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The local variable ret is only used to test the return value of the
call to rtl8188eu_xmitframe_complete(). Use the function directly in
the if test and remove the variable ret.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace tabs with spaces and/or remove spaces in declarations
to cleanup whitespace.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add spaces around '>>' and '&' to follow kernel coding style.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary parentheses in usb_ops_linux.c.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling mistake in a comment reported by checkpatch.
checksumed -> checksummed
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove braces from single line if else statement.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup line ending with a '(' to follow kernel coding style.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use __func__ instead of hardcoded function names.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Previously, 2 members called `initial' and `cachedzone_la' are used
for applying caching policy (whether the workgroup is at either end),
which are hard to understand, rename them to `backmost' and `headoffset'.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For the case of nr_to_read == lookahead_size, it is better to
decompress asynchronously as well since no page will be needed immediately.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Let's make sure that the one registering a workgroup will also
take the primary work lock at first for two reasons:
  1) There's no need to introduce such a race window (and consequently
     overhead) between registering and locking, other tasks could break
     in by chance, and the race seems unnecessary (no benefit at all);

  2) It's better to take the primary work when a workgroup
     is registered to apply the cache managed policy, for example,
     if some other tasks break in, it could turn into the in-place
     decompression rather than use as the cached decompression.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`z_erofs_vle_workgroup' is heavily generated in the decompression,
for example, it resets 32 bytes redundantly for 64-bit platforms
even through Z_EROFS_VLE_INLINE_PAGEVECS + Z_EROFS_CLUSTER_MAX_PAGES,
default 4, pages are stored in `z_erofs_vle_workgroup'.

As an another example, `struct mutex' takes 72 bytes for our kirin
64-bit platforms, it's unnecessary to be reseted at first and
be initialized each time.

Let's avoid filling all `z_erofs_vle_workgroup' with 0 at first
since most fields are reinitialized to meaningful values later,
and pagevec is no need to initialized at all.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Just like other generic locks, insert a full barrier
in case of memory reorder.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are two minor issues in the current freeze interface:

   1) Freeze interfaces have not related with CONFIG_DEBUG_SPINLOCK,
      therefore fix the incorrect conditions;

   2) For SMP platforms, it should also disable preemption before
      doing atomic_cmpxchg in case that some high priority tasks
      preempt between atomic_cmpxchg and disable_preempt, then spin
      on the locked refcount later.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's better to use atomic_cond_read_relaxed, which is implemented
in hardware instructions to monitor a variable changes currently
for ARM64, instead of open-coded busy waiting.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When the managed cache is enabled, the last reference count
of a workgroup must be used for its workstation.

Otherwise, it could lead to incorrect (un)freezes in
the reclaim path, and it would be harmful.

A typical race as follows:

Thread 1 (In the reclaim path)  Thread 2
workgroup_freeze(grp, 1)                                refcnt = 1
...
workgroup_unfreeze(grp, 1)                              refcnt = 1
                                workgroup_get(grp)      refcnt = 2 (x)
workgroup_put(grp)                                      refcnt = 1 (x)
                                ...unexpected behaviors

* grp is detached but still used, which violates cache-managed
  freeze constraint.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's better not to positively BUG_ON the kernel, however developers
need a way to locate issues as soon as possible.

DBG_BUGON is introduced and it could only crash when EROFS_FS_DEBUG
(EROFS developping feature) is on. It is helpful for developers
to find and solve bugs quickly by eng builds.

Previously, DBG_BUGON is defined as ((void)0) if EROFS_FS_DEBUG is off,
but some unused variable warnings as follows could occur:

drivers/staging/erofs/unzip_vle.c: In function `init_alway:':
drivers/staging/erofs/unzip_vle.c:61:33: warning: unused variable `work' [-Wunused-variable]
  struct z_erofs_vle_work *const work =
                                 ^~~~

Fix it to #define DBG_BUGON(x) ((void)(x)).
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`trace_erofs_readpage' was designed for .readpage() interface hook
in order to trace the detailed synchronized read rather than
the internal implementation `z_erofs_do_read_page' which both
.readpage() and .readpages() use.

It seems the tracepoint was placed to a wrong place by mistake and
it should be moved to the right place.

Fixes: 284db12c ("staging: erofs: add trace points for reading zipped data")
Reviewed-by: Chen Gong <gongchen4@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>