- 15 Apr, 2024 13 commits
-
-
Jani Nikula authored
Prefer drm_dbg_kms() over DRM_DEBUG_KMS() to debug log the drm device info. v2: Drop changes to mode printing (Ville) Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> # v1 Link: https://patchwork.freedesktop.org/patch/msgid/8b6a83edd1c3896b9d652b5368702eba5f382a1c.1712568037.git.jani.nikula@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Jani Nikula authored
Use a more suitable type to avoid the cast. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by:
Melissa Wen <mwen@igalia.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4dc7bfc48e65d29829843941a70c8bf97b87abcc.1712655867.git.jani.nikula@intel.comSigned-off-by:
-
Jani Nikula authored
To avoid accessing and parsing the raw EDID with drm_edid_raw(), switch to the struct drm_edid based function to extract product id, and use the drm printer function to debug log it. The underlying assumption is that struct drm_edid_product_id and struct lvds_pnp_id describe identical data, albeit with slightly different member definitions. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by:
-
Jani Nikula authored
Add a function to print a decoded EDID vendor and product id to a drm printer, optionally with the raw data. v2: - refactor date printing - use seq_buf to avoid kasprintf() (Ville) - handle week == 0 (Ville) - use be16_to_cpu() on manufacturer_name Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Melissa Wen <mwen@igalia.com> # v1 Reviewed-by:
-
Jani Nikula authored
Add a struct drm_edid based function to get the vendor and product ID from an EDID. Add a separate struct for defining this part of the EDID, with defined byte order for manufacturer name, product code and serial number. v2: Define manufacturer_name as __be16 instead of u8[2] (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by:
-
Arnd Bergmann authored
After my fix yesterday, I ran into another problem of the same kind: aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/analogix_dp_core.o: in function `drm_dp_dpcd_readb': analogix_dp_core.c:(.text+0x194): undefined reference to `drm_dp_dpcd_read' aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/analogix_dp_core.o: in function `drm_dp_dpcd_writeb': analogix_dp_core.c:(.text+0x214): undefined reference to `drm_dp_dpcd_write' aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/analogix_dp_core.o: in function `analogix_dp_stop_crc': analogix_dp_core.c:(.text+0x4b0): undefined reference to `drm_dp_stop_crc' aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/analogix_dp_core.o: in function `analogix_dp_start_crc': analogix_dp_core.c:(.text+0xbe8): undefined reference to `drm_dp_start_crc' Add the same dependency again to ROCKCHIP_ANALOGIX_DP after checking that nothing else selects the analogix driver. Also add a dependency to DRM_ANALOGIX_DP to make it easier to identifier future problems of this type when they get introduced. Fixes: 0323287d ("drm: Switch DRM_DISPLAY_DP_HELPER to depends on") Fixes: d1ef8fc1 ("drm: fix DRM_DISPLAY_DP_HELPER dependencies") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240405143531.925589-1-arnd@kernel.org
-
Aleksandr Mishin authored
In vc4_hdmi_audio_init() of_get_address() may return NULL which is later dereferenced. Fix this bug by adding NULL check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: bb7d7856 ("drm/vc4: Add HDMI audio support") Signed-off-by:
Aleksandr Mishin <amishin@t-argos.ru> Signed-off-by:
-
Sebastian Wick authored
When extending support for a driver-specific KMS property to additional drivers, we should apply all the requirements for new properties and make sure the semantics are the same and documented. v2: devs of the driver which introduced property shall help and ack Signed-off-by:
Sebastian Wick <sebastian.wick@redhat.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Erico Nunes authored
Create a simple data struct to hold compatible data so that we don't have to do the casts to void pointer to hold data. Fixes the following warning: drivers/gpu/drm/lima/lima_drv.c:387:13: error: cast to smaller integer type 'enum lima_gpu_id' from 'const void *' Signed-off-by:
Erico Nunes <nunes.erico@gmail.com> Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240401224329.1228468-3-nunes.erico@gmail.com
-
Erico Nunes authored
lima uses a shared interrupt, so the interrupt handlers must be prepared to be called at any time. At driver removal time, the clocks are disabled early and the interrupts stay registered until the very end of the remove process due to the devm usage. This is potentially a bug as the interrupts access device registers which assumes clocks are enabled. A crash can be triggered by removing the driver in a kernel with CONFIG_DEBUG_SHIRQ enabled. This patch frees the interrupts at each lima device finishing callback so that the handlers are already unregistered by the time we fully disable clocks. Signed-off-by:
-
Erico Nunes authored
There is a race condition in which a rendering job might take just long enough to trigger the drm sched job timeout handler but also still complete before the hard reset is done by the timeout handler. This runs into race conditions not expected by the timeout handler. In some very specific cases it currently may result in a refcount imbalance on lima_pm_idle, with a stack dump such as: [10136.669170] WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/lima/lima_devfreq.c:205 lima_devfreq_record_idle+0xa0/0xb0 ... [10136.669459] pc : lima_devfreq_record_idle+0xa0/0xb0 ... [10136.669628] Call trace: [10136.669634] lima_devfreq_record_idle+0xa0/0xb0 [10136.669646] lima_sched_pipe_task_done+0x5c/0xb0 [10136.669656] lima_gp_irq_handler+0xa8/0x120 [10136.669666] __handle_irq_event_percpu+0x48/0x160 [10136.669679] handle_irq_event+0x4c/0xc0 We can prevent that race condition entirely by masking the irqs at the beginning of the timeout handler, at which point we give up on waiting for that job entirely. The irqs will be enabled again at the next hard reset which is already done as a recovery by the timeout handler. Signed-off-by:
-
Erico Nunes authored
In commit 53cb55b2 ("drm/lima: handle spurious timeouts due to high irq latency") a check was added to detect an unexpectedly high interrupt latency timeout. With further investigation it was noted that on Mali-450 the pp bcast irq may also be a trigger of race conditions against the timeout handler, so add it to this check too. Signed-off-by:
-
Erico Nunes authored
This is needed because we want to reset those devices in device-agnostic code such as lima_sched. In particular, masking irqs will be useful before a hard reset to prevent race conditions. Signed-off-by:
-
- 12 Apr, 2024 3 commits
-
-
Arnd Bergmann authored
The alternative stub functions are listed as global, which produces a build failure in some configs: In file included from drivers/accel/qaic/qaic_drv.c:31: drivers/accel/qaic/qaic_debugfs.h:16:5: error: no previous prototype for 'qaic_bootlog_register' [-Werror=missing-prototypes] 16 | int qaic_bootlog_register(void) { return 0; } | ^~~~~~~~~~~~~~~~~~~~~ drivers/accel/qaic/qaic_debugfs.h:17:6: error: no previous prototype for 'qaic_bootlog_unregister' [-Werror=missing-prototypes] 17 | void qaic_bootlog_unregister(void) {} | ^~~~~~~~~~~~~~~~~~~~~~~ drivers/accel/qaic/qaic_debugfs.h:18:6: error: no previous prototype for 'qaic_debugfs_init' [-Werror=missing-prototypes] 18 | void qaic_debugfs_init(struct qaic_drm_device *qddev) {} | ^~~~~~~~~~~~~~~~~ Make them static inline as intended. Fixes: 5f8df5c6 ("accel/qaic: Add bootlog debugfs") Signed-off-by:Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by:
-
Jeffrey Hugo authored
The AIC100 secondary bootloader uses the Sahara protocol for two purposes - loading the runtime firmware images from the host, and offloading crashdumps to the host. The crashdump functionality is only invoked when the AIC100 device encounters a crash and dumps are enabled. Also the collection of the dump is optional - the host can reject collecting the dump. The Sahara protocol contains many features and modes including firmware upload, crashdump download, and client commands. For simplicity, implement the parts of the protocol needed for loading firmware to the device. Fundamentally, the Sahara protocol is an embedded file transfer protocol. Both sides negotiate a connection through a simple exchange of hello messages. After handshaking through a hello message, the device either sends a message requesting images, or a message advertising the memory dump available for the host. For image transfer, the remote device issues a read data request that provides an image (by ID), an offset, and a length. The host has an internal mapping of image IDs to filenames. The host is expected to access the image and transfer the requested chunk to the device. The device can issue additional read requests, or signal that it has consumed enough data from this image with an end of image message. The host confirms the end of image, and the device can proceed with another image by starting over with the hello exchange again. Some images may be optional, and only provided as part of a provisioning flow. The host is not aware of this information, and thus should report an error to the device when an image is not available. The device will evaluate if the image is required or not, and take the appropriate action. Signed-off-by:
Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by:
Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by:
Bjorn Andersson <andersson@kernel.org> Reviewed-by:
Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240322034917.3522388-1-quic_jhugo@quicinc.com
-
Huai-Yuan Liu authored
In malidp_mw_connector_reset, new memory is allocated with kzalloc, but no check is performed. In order to prevent null pointer dereferencing, ensure that mw_state is checked before calling __drm_atomic_helper_connector_reset. Fixes: 8cbc5caf ("drm: mali-dp: Add writeback connector") Signed-off-by:
Huai-Yuan Liu <qq810974084@gmail.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240407063053.5481-1-qq810974084@gmail.com
-
- 11 Apr, 2024 6 commits
-
-
Ville Syrjälä authored
Advertize more suitable cursor sizes via the new SIZE_HINTS plane property. We can't really enumerate all supported cursor sizes on the platforms where the cursor height can vary freely, so for simplicity we'll just expose all square+POT sizes between each platform's min and max cursor limits. Depending on the platform this will give us one of three results: - 64x64,128x128,256x256,512x512 - 64x64,128x128,256x256 - 64x64 Cc: Simon Ser <contact@emersion.fr> Cc: Jonas Ådahl <jadahl@redhat.com> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Sameer Lattannavar <sameer.lattannavar@intel.com> Cc: Sebastian Wick <sebastian.wick@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Pekka Paalanen <pekka.paalanen@collabora.com> Signed-off-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
-
Ville Syrjälä authored
Add a new immutable plane property by which a plane can advertise a handful of recommended plane sizes. This would be mostly exposed by cursor planes as a slightly more capable replacement for the DRM_CAP_CURSOR_WIDTH/HEIGHT caps, which can only declare a one size fits all limit for the whole device. Currently eg. amdgpu/i915/nouveau just advertize the max cursor size via the cursor size caps. But always using the max sized cursor can waste a surprising amount of power, so a better strategy is desirable. Most other drivers don't specify any cursor size at all, in which case the ioctl code just claims that 64x64 is a great choice. Whether that is actually true is debatable. A poll of various compositor developers informs us that blindly probing with setcursor/atomic ioctl to determine suitable cursor sizes is not acceptable, thus the introduction of the new property to supplant the cursor size caps. The compositor will now be free to select a more optimal cursor size from the short list of options. Note that the reported sizes (either via the property or the caps) make no claims about things such as plane scaling. So these things should only really be consulted for simple "cursor like" use cases. Userspace consumer in the form of mutter seems ready: https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3165 v2: Try to add some docs v3: Specify that value 0 is reserved for future use (basic idea from Jonas) Drop the note about typical hardware (Pekka) v4: Update the docs to indicate the list is "in order of preference" Add a a link to the mutter MR v5: Limit to cursors only for now (Simon) Cc: Jonas Ådahl <jadahl@redhat.com> Cc: Sameer Lattannavar <sameer.lattannavar@intel.com> Reviewed-by:
Simon Ser <contact@emersion.fr> Acked-by:
Daniel Stone <daniels@collabora.com> Acked-by:
Harry Wentland <harry.wentland@amd.com> Acked-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Signed-off-by:
-
Jesse Zhang authored
remove the unsed the paramter in the function ttm_bo_bounce_temp_buffer and ttm_bo_add_move_fence. V2:rebase the patch on top of drm-misc-next (Christian) Signed-off-by:
Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240401030443.3384494-1-jesse.zhang@amd.comSigned-off-by:
-
Thomas Zimmermann authored
Move the definition of struct ast_ddc to ast_ddc.c and return the i2c adapter from ast_ddc_create(). Update callers accordingly. Avoids including Linux i2c header files, except where required. No functional changes. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240403103325.30457-4-tzimmermann@suse.de
-
Thomas Zimmermann authored
Reorder the code to set up the DDC channel by data structure, so that each data structure's init is in a separate block: first the bit algo then the i2c adapter. Makes the code more readable. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Compute the i2c timeout in jiffies from a value in milliseconds. The original values of 2 jiffies equals 2 milliseconds if HZ has been configured to a value of 1000. This corresponds to 2.2 milliseconds used by most other DRM drivers. Update ast accordingly. Signed-off-by:
-
- 10 Apr, 2024 9 commits
-
-
Lyude Paul authored
I didn't pay close enough attention the last time I tried to fix this problem - while we currently do correctly take care to make sure we don't probe a connected eDP port more then once, we don't do the same thing for eDP ports we found to be disconnected. So, fix this and make sure we only ever probe eDP ports once and then leave them at that connector state forever (since without HPD, it's not going to change on its own anyway). This should get rid of the last few GSP errors getting spit out during runtime suspend and resume on some machines, as we tried to reprobe eDP ports in response to ACPI hotplug probe events. Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240404233736.7946-3-lyude@redhat.com
-
Lyude Paul authored
GSP has its own state for keeping track of whether or not a given display connector is plugged in or not, and enforces this state on the driver. In particular, AUX transactions on a DisplayPort connector which GSP says is disconnected can never succeed - and can in some cases even cause unexpected timeouts, which can trickle up to cause other problems. A good example of this is runtime power management: where we can actually get stuck trying to resume the GPU if a userspace application like fwupd tries accessing a drm_aux_dev for a disconnected port. This was an issue I hit a few times with my Slimbook Executive 16 - where trying to offload something to the discrete GPU would wake it up, and then potentially cause it to timeout as fwupd tried to immediately access the dp_aux_dev nodes for nouveau. Likewise: we don't really have any cases I know of where we'd want to ignore this state and try an aux transaction anyway - and failing pointless aux transactions immediately can even speed things up. So - let's start enabling/disabling the aux bus in nouveau_dp_detect() to fix this. We enable the aux bus during connector probing, and leave it enabled if we discover something is actually on the connector. Otherwise, we just shut it off. This should fix some people's runtime PM issues (like myself), and also get rid of quite of a lot of GSP error spam in dmesg. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240304091005.717012-2-u.kleine-koenig@pengutronix.de
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Wolfram Sang authored
Since commit ab78029e ("drivers/pinctrl: grab default handles from device core"), we can rely on device core for setting the default pins. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230922073714.6164-1-wsa+renesas@sang-engineering.com
-
Krzysztof Kozlowski authored
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Dan Carpenter authored
Free "dp" before returning. Fixes: be318d01 ("drm: xlnx: dp: Reset DisplayPort IP") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
-
Tomi Valkeinen authored
Add myself as a co-maintainer for Xilinx DRM drivers to help Laurent. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Jani Nikula authored
gma_drm.h has become an empty, unused header. Remove. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240408104230.3191827-1-jani.nikula@intel.comSigned-off-by:
-
- 08 Apr, 2024 5 commits
-
-
Aleksandr Mishin authored
In cdns_mhdp_atomic_enable(), the return value of drm_mode_duplicate() is assigned to mhdp_state->current_mode, and there is a dereference of it in drm_mode_set_name(), which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Fix this bug add a check of mhdp_state->current_mode. Fixes: fb43aa0a ("drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge") Signed-off-by:
-
Chen-Yu Tsai authored
The ITE IT6505 display bridge can take one I2S input and transmit it over the DisplayPort link. Add #sound-dai-cells (= 0) to the binding for it. Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240327085250.3427496-1-wenst@chromium.org
-
Douglas Anderson authored
If we're using the AUX channel for eDP backlight and it fails to probe for some reason, let's _not_ fail the panel probe. At least one case where we could fail to init the backlight is because of a dead or physically missing panel. As talked about in detail in the earlier patch in this series, ("drm/panel-edp: If we fail to powerup/get EDID, use conservative timings"), this can cause the entire system's display pipeline to fail to come up and that's non-ideal. If we fail to init the backlight for some transitory reason, we should dig in and see if there's a way to fix this (perhaps retries?). Even in that case, though, having a panel whose backlight is stuck at 100% (the default, at least in the panel Samsung ATNA33XC20 I tested) is better than having no panel at all. Reviewed-by:Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by:
-
Douglas Anderson authored
If at boot we fail to power up the eDP panel (most often happens if the eDP panel never asserts HPD to us) or if we are unable to read the EDID at bootup to figure out the panel's ID then let's use the conservative eDP panel powerup/powerdown timings but _not_ fail the probe. It might seem strange to _not_ fail the probe in this case since we were unable to powerup the panel and confirm it's there. However, there is a reason to do this. Specifically, if we fail to probe the panel then it really throws the whole display pipeline for loop. Most DRM subsystems are written so that they wait until all components (including the panel) have probed before they set everything up. When the panel doesn't come up then this never happens. As a side effect of not setting everything up then other display adapters don't get initialized. As a practical example, I can see that if I open up a sc7180-trogdor based Chromebook that's using the generic "edp-panel" and unplug the eDP panel that it causes the _external_ DP monitor not to function. This is obviously bad because it means that a device with a dead eDP panel becomes e-waste when it could instead still be given useful life with an external display. NOTES: - When we fail to probe like this, boot is a bit slow because we try several times to power the panel up. This doesn't feel horrible because it'll eventually work and the retries are known to help bring some panels up. - In the case where we hit the condition of failing to power up, the display will likely _never_ have a chance to work again until reboot. Once the panel-edp pm_runtime resume function fails it doesn't ever seem to retry. This is probably for the best given that we don't have any real timing/modes. eDP isn't expected to be "hotplugged" so this makes some sense. - It turns out that this makes panel-edp behave more similarly for users of the generic "edp-panel" compatible string and the old fixed panel compatible string. With the old fixed panel compatible string we don't talk to the panel during probe so we'd actually behave much the same way that we'll now behave for the generic "edp-panel". Reviewed-by:
-
Douglas Anderson authored
If we're using the generic "edp-panel" compatible string and we fail to detect an eDP panel then we fall back to conservative timings for powering up and powering down the panel. Abstract out the function for setting these timings so it can be used in future patches. No functional change expected--just code movement. Reviewed-by:
-
- 05 Apr, 2024 4 commits
-
-
Jeffrey Hugo authored
When debugging functional issues with workload input processing, it is useful to know if requests are backing up in the fifo, or perhaps getting stuck elsewhere. To answer the question of how many requests are in the fifo, implement a "queued" debugfs entry per-dbc that returns the number of pending requests when read. Signed-off-by:
-
Jeffrey Hugo authored
Each DMA Bridge Channel (dbc) has a unique configured fifo size which is specified by the userspace client of that dbc. Since the fifo is circular, it is useful to know the configured size when debugging issues. Add a per-dbc subdirectory in debugfs and in each subdirectory add a fifo_size entry that will display the size of that dbc's fifo when read. Signed-off-by:
-
Jeffrey Hugo authored
During the boot process of AIC100, the bootloaders (PBL and SBL) log messages to device RAM. During SBL, if the host opens the QAIC_LOGGING channel, SBL will offload the contents of the log buffer to the host, and stream any new messages that SBL logs. This log of the boot process can be very useful for an initial triage of any boot related issues. For example, if SBL rejects one of the runtime firmware images for a validation failure, SBL will log a reason why. Add the ability of the driver to open the logging channel, receive the messages, and store them. Also define a debugfs entry called "bootlog" by hooking into the DRM debugfs framework. When the bootlog debugfs entry is read, the current contents of the log that the host is caching is displayed to the user. The driver will retain the cache until it detects that the device has rebooted. At that point, the cache will be freed, and the driver will wait for a new log. With this scheme, the driver will only have a cache of the log from the current device boot. Note that if the driver initializes a device and it is already in the runtime state (QSM), no bootlog will be available through this mechanism because the driver and SBL have not communicated. Signed-off-by:
-
Maxime Ripard authored
Commit c0e0f139 ("drm: Make drivers depends on DRM_DW_HDMI") turned select dependencies into depends on ones. However, DRM_DW_HDMI was not manually selectable which resulted in no way to enable the drivers that were now depending on it. Fixes: 4fc8cb47 ("drm/display: Move HDMI helpers into display-helper module") Reported-by:
Mark Brown <broonie@kernel.org> Reported-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
-
