- 03 Apr, 2019 40 commits
-
-
Christophe Leroy authored
commit 27da8071 upstream. The commit identified below adds MC_BTB_FLUSH macro only when CONFIG_PPC_FSL_BOOK3E is defined. This results in the following error on some configs (seen several times with kisskb randconfig_defconfig) arch/powerpc/kernel/exceptions-64e.S:576: Error: Unrecognized opcode: `mc_btb_flush' make[3]: *** [scripts/Makefile.build:367: arch/powerpc/kernel/exceptions-64e.o] Error 1 make[2]: *** [scripts/Makefile.build:492: arch/powerpc/kernel] Error 2 make[1]: *** [Makefile:1043: arch/powerpc] Error 2 make: *** [Makefile:152: sub-make] Error 2 This patch adds a blank definition of MC_BTB_FLUSH for other cases. Fixes: 10c5e83a ("powerpc/fsl: Flush the branch predictor at each kernel entry (64bit)") Cc: Diana Craciun <diana.craciun@nxp.com> Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
Daniel Axtens <dja@axtens.net> Reviewed-by:
Diana Craciun <diana.craciun@nxp.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Diana Craciun authored
commit 039daac5 upstream. Fixed the following build warning: powerpc-linux-gnu-ld: warning: orphan section `__btb_flush_fixup' from `arch/powerpc/kernel/head_44x.o' being placed in section `__btb_flush_fixup'. Signed-off-by:
-
Diana Craciun authored
commit dfa88658 upstream. Report branch predictor state flush as a mitigation for Spectre variant 2. Signed-off-by:
-
Diana Craciun authored
commit 3bc8ea86 upstream. If the user choses not to use the mitigations, replace the code sequence with nops. Signed-off-by:
-
Diana Craciun authored
commit e7aa61f4 upstream. Switching from the guest to host is another place where the speculative accesses can be exploited. Flush the branch predictor when entering KVM. Signed-off-by:
-
Diana Craciun authored
commit 7fef4362 upstream. In order to protect against speculation attacks on indirect branches, the branch predictor is flushed at kernel entry to protect for the following situations: - userspace process attacking another userspace process - userspace process attacking the kernel Basically when the privillege level change (i.e.the kernel is entered), the branch predictor state is flushed. Signed-off-by:
-
Diana Craciun authored
commit 10c5e83a upstream. In order to protect against speculation attacks on indirect branches, the branch predictor is flushed at kernel entry to protect for the following situations: - userspace process attacking another userspace process - userspace process attacking the kernel Basically when the privillege level change (i.e. the kernel is entered), the branch predictor state is flushed. Signed-off-by:
-
Diana Craciun authored
commit f633a8ad upstream. When the command line argument is present, the Spectre variant 2 mitigations are disabled. Signed-off-by:
-
Diana Craciun authored
commit 98518c4d upstream. In order to flush the branch predictor the guest kernel performs writes to the BUCSR register which is hypervisor privilleged. However, the branch predictor is flushed at each KVM entry, so the branch predictor has been already flushed, so just return as soon as possible to guest. Signed-off-by:
-
Diana Craciun authored
commit 1cbf8990 upstream. The BUCSR register can be used to invalidate the entries in the branch prediction mechanisms. Signed-off-by:
-
Diana Craciun authored
commit 76a5eaa3 upstream. In order to protect against speculation attacks (Spectre variant 2) on NXP PowerPC platforms, the branch predictor should be flushed when the privillege level is changed. This patch is adding the infrastructure to fixup at runtime the code sections that are performing the branch predictor flush depending on a boot arg parameter which is added later in a separate patch. Signed-off-by:
-
Eric Dumazet authored
commit 9180bb4f upstream. In my latest patch I missed one rcu_read_unlock(), in case device is down. Fixes: 4477138f ("tun: properly test for IFF_UP") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dean Nelson authored
[ Upstream commit cd35ef91 ] For the non-XDP case, commit 77322538 ("net: thunderx: Optimize page recycling for XDP") added code to nicvf_free_rbdr() that, when releasing the additional receive buffer page reference held for recycling, repeatedly calls put_page() until the page's _refcount goes to zero. Which results in the page being freed. This is not okay if the page's _refcount was greater than 1 (in the non-XDP case), because nicvf_free_rbdr() should not be subtracting more than what nicvf_alloc_page() had previously added to the page's _refcount, which was only 1 (in the non-XDP case). This can arise if a received packet is still being processed and the receive buffer (i.e., skb->head) has not yet been freed via skb_free_head() when nicvf_free_rbdr() is spinning through the aforementioned put_page() loop. If this should occur, when the received packet finishes processing and skb_free_head() is called, various problems can ensue. Exactly what, depends on whether the page has already been reallocated or not, anything from "BUG: Bad page state ... ", to "Unable to handle kernel NULL pointer dereference ..." or "Unable to handle kernel paging request...". So this patch changes nicvf_free_rbdr() to only call put_page() once for pages held for recycling (in the non-XDP case). Fixes: 77322538 ("net: thunderx: Optimize page recycling for XDP") Signed-off-by:
Dean Nelson <dnelson@redhat.com> Signed-off-by:
-
Dean Nelson authored
[ Upstream commit b3e20806 ] Commit 77322538 ("net: thunderx: Optimize page recycling for XDP") added code to nicvf_alloc_page() that inadvertently disables receive buffer page recycling for the non-XDP case by always NULL'ng the page pointer. This patch corrects two if-conditionals to allow for the recycling of non-XDP mode pages by only setting the page pointer to NULL when the page is not ready for recycling. Fixes: 77322538 ("net: thunderx: Optimize page recycling for XDP") Signed-off-by:
-
John Hurley authored
[ Upstream commit 064c5d68 ] A new mirred action is created by the tcf_mirred_init function. This contains a list head struct which is inserted into a global list on successful creation of a new action. However, after a creation, it is still possible to error out and call the tcf_idr_release function. This, in turn, calls the act_mirr cleanup function via __tcf_idr_release and __tcf_action_put. This cleanup function tries to delete the list entry which is as yet uninitialised, leading to a NULL pointer exception. Fix this by initialising the list entry on creation of a new action. Bug report: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 PGD 8000000840c73067 P4D 8000000840c73067 PUD 858dcc067 PMD 0 Oops: 0002 [#1] SMP PTI CPU: 32 PID: 5636 Comm: handler194 Tainted: G OE 5.0.0+ #186 Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.3.6 06/03/2015 RIP: 0010:tcf_mirred_release+0x42/0xa7 [act_mirred] Code: f0 90 39 c0 e8 52 04 57 c8 48 c7 c7 b8 80 39 c0 e8 94 fa d4 c7 48 8b 93 d0 00 00 00 48 8b 83 d8 00 00 00 48 c7 c7 f0 90 39 c0 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 d0 00 RSP: 0018:ffffac4aa059f688 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9dcd1b214d00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9dcd1fa165f8 RDI: ffffffffc03990f0 RBP: ffff9dccf9c7af80 R08: 0000000000000a3b R09: 0000000000000000 R10: ffff9dccfa11f420 R11: 0000000000000000 R12: 0000000000000001 R13: ffff9dcd16b433c0 R14: ffff9dcd1b214d80 R15: 0000000000000000 FS: 00007f441bfff700(0000) GS:ffff9dcd1fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000839e64004 CR4: 00000000001606e0 Call Trace: tcf_action_cleanup+0x59/0xca __tcf_action_put+0x54/0x6b __tcf_idr_release.cold.33+0x9/0x12 tcf_mirred_init.cold.20+0x22e/0x3b0 [act_mirred] tcf_action_init_1+0x3d0/0x4c0 tcf_action_init+0x9c/0x130 tcf_exts_validate+0xab/0xc0 fl_change+0x1ca/0x982 [cls_flower] tc_new_tfilter+0x647/0x8d0 ? load_balance+0x14b/0x9e0 rtnetlink_rcv_msg+0xe3/0x370 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? _cond_resched+0x15/0x30 ? __kmalloc_node_track_caller+0x1d4/0x2b0 ? rtnl_calcit.isra.31+0xf0/0xf0 netlink_rcv_skb+0x49/0x110 netlink_unicast+0x16f/0x210 netlink_sendmsg+0x1df/0x390 sock_sendmsg+0x36/0x40 ___sys_sendmsg+0x27b/0x2c0 ? futex_wake+0x80/0x140 ? do_futex+0x2b9/0xac0 ? ep_scan_ready_list.constprop.22+0x1f2/0x210 ? ep_poll+0x7a/0x430 __sys_sendmsg+0x47/0x80 do_syscall_64+0x55/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 4e232818 ("net: sched: act_mirred: remove dependency on rtnl lock") Signed-off-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Herbert Xu authored
[ Upstream commit b5f9bd15 ] ila_xlat_nl_cmd_flush uses rhashtable walkers allocated from the stack but it never frees them. This corrupts the walker list of the hash table. This patch fixes it. Reported-by: syzbot+dae72a112334aa65a159@syzkaller.appspotmail.com Fixes: b6e71bde ("ila: Flush netlink command to clear xlat...") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Zhiqiang Liu authored
[ Upstream commit cc4807bb ] Commit ad6c9986 ("vxlan: Fix GRO cells race condition between receive and link delete") fixed a race condition for the typical case a vxlan device is dismantled from the current netns. But if a netns is dismantled, vxlan_destroy_tunnels() is called to schedule a unregister_netdevice_queue() of all the vxlan tunnels that are related to this netns. In vxlan_destroy_tunnels(), gro_cells_destroy() is called and finished before unregister_netdevice_queue(). This means that the gro_cells_destroy() call is done too soon, for the same reasons explained in above commit. So we need to fully respect the RCU rules, and thus must remove the gro_cells_destroy() call or risk use after-free. Fixes: 58ce31cc ("vxlan: GRO support at tunnel layer") Signed-off-by:
Suanming.Mou <mousuanming@huawei.com> Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 1017e098 ] VRF devices don't work with upper devices. Currently, it's possible to add a VRF device to a bridge or team, and to create macvlan, macsec, or ipvlan devices on top of a VRF (bond and vlan are prevented respectively by the lack of an ndo_set_mac_address op and the NETIF_F_VLAN_CHALLENGED feature flag). Fix this by setting the IFF_NO_RX_HANDLER flag (introduced in commit f5426250 ("net: introduce IFF_NO_RX_HANDLER")). Cc: David Ahern <dsahern@gmail.com> Fixes: 193125db ("net: Introduce VRF device driver") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 4477138f ] Same reasons than the ones explained in commit 4179cb5a ("vxlan: test dev->flags & IFF_UP before calling netif_rx()") netif_rx_ni() or napi_gro_frags() must be called under a strict contract. At device dismantle phase, core networking clears IFF_UP and flush_all_backlogs() is called after rcu grace period to make sure no incoming packet might be in a cpu backlog and still referencing the device. A similar protocol is used for gro layer. Most drivers call netif_rx() from their interrupt handler, and since the interrupts are disabled at device dismantle, netif_rx() does not have to check dev->flags & IFF_UP Virtual drivers do not have this guarantee, and must therefore make the check themselves. Fixes: 1bd4978a ("tun: honor IFF_UP in tun_get_user()") Signed-off-by:
-
Erik Hugne authored
[ Upstream commit 33872d79 ] When cancelling a subscription, we have to clear the cancel bit in the request before iterating over any established subscriptions with memcmp. Otherwise no subscription will ever be found, and it will not be possible to explicitly unsubscribe individual subscriptions. Fixes: 8985ecc7 ("tipc: simplify endianness handling in topology subscriber") Signed-off-by:
Erik Hugne <erik.hugne@gmail.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 9926cb5f ] When running a syz script, a panic occurred: [ 156.088228] BUG: KASAN: use-after-free in tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.094315] Call Trace: [ 156.094844] <IRQ> [ 156.095306] dump_stack+0x7c/0xc0 [ 156.097346] print_address_description+0x65/0x22e [ 156.100445] kasan_report.cold.3+0x37/0x7a [ 156.102402] tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.106517] call_timer_fn+0x19a/0x610 [ 156.112749] run_timer_softirq+0xb51/0x1090 It was caused by the netns freed without deleting the discoverer timer, while later on the netns would be accessed in the timer handler. The timer should have been deleted by tipc_net_stop() when cleaning up a netns. However, tipc has been able to enable a bearer and start d->timer without the local node_addr set since Commit 52dfae5c ("tipc: obtain node identity from interface by default"), which caused the timer not to be deleted in tipc_net_stop() then. So fix it in tipc_net_stop() by changing to check local node_id instead of local node_addr, as Jon suggested. While at it, remove the calling of tipc_nametbl_withdraw() there, since tipc_nametbl_stop() will take of the nametbl's freeing after. Fixes: 52dfae5c ("tipc: obtain node identity from interface by default") Reported-by: syzbot+a25307ad099309f1c2b9@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
-
Erik Hugne authored
[ Upstream commit ea239314 ] We move the check that prevents connecting service ranges to after the RDM/DGRAM check, and move address sanity control to a separate function that also validates the service range. Fixes: 23998835 ("tipc: improve address sanity check in tipc_connect()") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 89e41309 ] When a dual stack tcp listener accepts an ipv4 flow, it should not attempt to use an ipv6 header or tcp_v6_iif() helper. Fixes: 1397ed35 ("ipv6: add flowinfo for tcp6 pkt_options for all cases") Fixes: df3687ff ("ipv6: add the IPV6_FL_F_REFLECT flag to IPV6_FL_A_GET") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Xin Long authored
[ Upstream commit ef82bcfa ] In sctp_setsockopt_bindx()/__sctp_setsockopt_connectx(), it allocates memory with addrs_size which is passed from userspace. We used flag GFP_USER to put some more restrictions on it in Commit cacc0621 ("sctp: use GFP_USER for user-controlled kmalloc"). However, since Commit c981f254 ("sctp: use vmemdup_user() rather than badly open-coding memdup_user()"), vmemdup_user() has been used, which doesn't check GFP_USER flag when goes to vmalloc_*(). So when addrs_size is a huge value, it could exhaust memory and even trigger oom killer. This patch is to use memdup_user() instead, in which GFP_USER would work to limit the memory allocation with a huge addrs_size. Note we can't fix it by limiting 'addrs_size', as there's no demand for it from RFC. Reported-by: syzbot+ec1b7575afef85a0e5ca@syzkaller.appspotmail.com Fixes: c981f254 ("sctp: use vmemdup_user() rather than badly open-coding memdup_user()") Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 273160ff ] sctp_hdr(skb) only works when skb->transport_header is set properly. But in Netfilter, skb->transport_header for ipv6 is not guaranteed to be right value for sctphdr. It would cause to fail to check the checksum for sctp packets. So fix it by using offset, which is always right in all places. v1->v2: - Fix the changelog. Fixes: e6d8b64b ("net: sctp: fix and consolidate SCTP checksumming code") Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
-
Herbert Xu authored
[ Upstream commit 408f13ef ] As it stands if a shrink is delayed because of an outstanding rehash, we will go into a rescheduling loop without ever doing the rehash. This patch fixes this by still carrying out the rehash and then rescheduling so that we can shrink after the completion of the rehash should it still be necessary. The return value of EEXIST captures this case and other cases (e.g., another thread expanded/rehashed the table at the same time) where we should still proceed with the rehash. Fixes: da20420f ("rhashtable: Add nested tables") Reported-by:
Josh Elsasser <jelsasser@appneta.com> Signed-off-by:
-
Maxime Chevallier authored
[ Upstream commit a4dc6a49 ] When using fanouts with AF_PACKET, the demux functions such as fanout_demux_cpu will return an index in the fanout socket array, which corresponds to the selected socket. The ordering of this array depends on the order the sockets were added to a given fanout group, so for FANOUT_CPU this means sockets are bound to cpus in the order they are configured, which is OK. However, when stopping then restarting the interface these sockets are bound to, the sockets are reassigned to the fanout group in the reverse order, due to the fact that they were inserted at the head of the interface's AF_PACKET socket list. This means that traffic that was directed to the first socket in the fanout group is now directed to the last one after an interface restart. In the case of FANOUT_CPU, traffic from CPU0 will be directed to the socket that used to receive traffic from the last CPU after an interface restart. This commit introduces a helper to add a socket at the tail of a list, then uses it to register AF_PACKET sockets. Note that this changes the order in which sockets are listed in /proc and with sock_diag. Fixes: dc99f600 ("packet: Add fanout support") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit a3e23f71 ] In netdev_queue_add_kobject and rx_queue_add_kobject, if sysfs_create_group failed, kobject_put will call netdev_queue_release to decrease dev refcont, however dev_hold has not be called. So we will see this while unregistering dev: unregister_netdevice: waiting for bcsh0 to become free. Usage count = -1 Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: d0d66837 ("net: don't decrement kobj reference count on init failure") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit 223a960c ] When using 16K DMA buffers and ring mode, the DES3 refill is not working correctly as the function is using a bogus pointer for checking the private data. As a result stale pointers will remain in the RX descriptor ring, so DMA will now likely overwrite/corrupt some already freed memory. As simple reproducer, just receive some UDP traffic: # ifconfig eth0 down; ifconfig eth0 mtu 9000; ifconfig eth0 up # iperf3 -c 192.168.253.40 -u -b 0 -R If you didn't crash by now check the RX descriptors to find non-contiguous RX buffers: cat /sys/kernel/debug/stmmaceth/eth0/descriptors_status [...] 1 [0x2be5020]: 0xa3220321 0x9ffc1ffc 0x72d70082 0x130e207e ^^^^^^^^^^^^^^^^^^^^^ 2 [0x2be5040]: 0xa3220321 0x9ffc1ffc 0x72998082 0x1311a07e ^^^^^^^^^^^^^^^^^^^^^ A simple ping test will now report bad data: # ping -s 8200 192.168.253.40 PING 192.168.253.40 (192.168.253.40) 8200(8228) bytes of data. 8208 bytes from 192.168.253.40: icmp_seq=1 ttl=64 time=1.00 ms wrong data byte #8144 should be 0xd0 but was 0x88 Fix the wrong pointer. Also we must refill DES3 only if the DMA buffer size is 16K. Fixes: 54139cf3 ("net: stmmac: adding multiple buffers for rx") Signed-off-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit e5dcc0c3 ] rose_write_internal() uses a temp buffer of 100 bytes, but a manual inspection showed that given arbitrary input, rose_create_facilities() can fill up to 110 bytes. Lets use a tailroom of 256 bytes for peace of mind, and remove the bounce buffer : we can simply allocate a big enough skb and adjust its length as needed. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:352 [inline] BUG: KASAN: stack-out-of-bounds in rose_create_facilities net/rose/rose_subr.c:521 [inline] BUG: KASAN: stack-out-of-bounds in rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116 Write of size 7 at addr ffff88808b1ffbef by task syz-executor.0/24854 CPU: 0 PID: 24854 Comm: syz-executor.0 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:131 memcpy include/linux/string.h:352 [inline] rose_create_facilities net/rose/rose_subr.c:521 [inline] rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116 rose_connect+0x7cb/0x1510 net/rose/af_rose.c:826 __sys_connect+0x266/0x330 net/socket.c:1685 __do_sys_connect net/socket.c:1696 [inline] __se_sys_connect net/socket.c:1693 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1693 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458079 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f47b8d9dc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458079 RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f47b8d9e6d4 R13: 00000000004be4a4 R14: 00000000004ceca8 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00022c7fc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff022c0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808b1ffa80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808b1ffb00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 03 >ffff88808b1ffb80: f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 04 f3 ^ ffff88808b1ffc00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808b1ffc80: 00 00 00 00 00 00 00 f1 f1 f1 f1 f1 f1 01 f2 01 Signed-off-by:
-
Jerome Brunet authored
[ Upstream commit daa5c4d0 ] If an interrupt is already pending when the interrupt is enabled on the GXL phy, no IRQ will ever be triggered. The fix is simply to make sure pending IRQs are cleared before setting up the irq mask. Fixes: cf127ff2 ("net: phy: meson-gxl: add interrupt support") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
-
Christoph Paasch authored
[ Upstream commit 398f0132 ] Since commit fc62814d ("net/packet: fix 4gb buffer limit due to overflow check") one can now allocate packet ring buffers >= UINT_MAX. However, syzkaller found that that triggers a warning: [ 21.100000] WARNING: CPU: 2 PID: 2075 at mm/page_alloc.c:4584 __alloc_pages_nod0 [ 21.101490] Modules linked in: [ 21.101921] CPU: 2 PID: 2075 Comm: syz-executor.0 Not tainted 5.0.0 #146 [ 21.102784] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 [ 21.103887] RIP: 0010:__alloc_pages_nodemask+0x2a0/0x630 [ 21.104640] Code: fe ff ff 65 48 8b 04 25 c0 de 01 00 48 05 90 0f 00 00 41 bd 01 00 00 00 48 89 44 24 48 e9 9c fe 3 [ 21.107121] RSP: 0018:ffff88805e1cf920 EFLAGS: 00010246 [ 21.107819] RAX: 0000000000000000 RBX: ffffffff85a488a0 RCX: 0000000000000000 [ 21.108753] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000000 [ 21.109699] RBP: 1ffff1100bc39f28 R08: ffffed100bcefb67 R09: ffffed100bcefb67 [ 21.110646] R10: 0000000000000001 R11: ffffed100bcefb66 R12: 000000000000000d [ 21.111623] R13: 0000000000000000 R14: ffff88805e77d888 R15: 000000000000000d [ 21.112552] FS: 00007f7c7de05700(0000) GS:ffff88806d100000(0000) knlGS:0000000000000000 [ 21.113612] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 21.114405] CR2: 000000000065c000 CR3: 000000005e58e006 CR4: 00000000001606e0 [ 21.115367] Call Trace: [ 21.115705] ? __alloc_pages_slowpath+0x21c0/0x21c0 [ 21.116362] alloc_pages_current+0xac/0x1e0 [ 21.116923] kmalloc_order+0x18/0x70 [ 21.117393] kmalloc_order_trace+0x18/0x110 [ 21.117949] packet_set_ring+0x9d5/0x1770 [ 21.118524] ? packet_rcv_spkt+0x440/0x440 [ 21.119094] ? lock_downgrade+0x620/0x620 [ 21.119646] ? __might_fault+0x177/0x1b0 [ 21.120177] packet_setsockopt+0x981/0x2940 [ 21.120753] ? __fget+0x2fb/0x4b0 [ 21.121209] ? packet_release+0xab0/0xab0 [ 21.121740] ? sock_has_perm+0x1cd/0x260 [ 21.122297] ? selinux_secmark_relabel_packet+0xd0/0xd0 [ 21.123013] ? __fget+0x324/0x4b0 [ 21.123451] ? selinux_netlbl_socket_setsockopt+0x101/0x320 [ 21.124186] ? selinux_netlbl_sock_rcv_skb+0x3a0/0x3a0 [ 21.124908] ? __lock_acquire+0x529/0x3200 [ 21.125453] ? selinux_socket_setsockopt+0x5d/0x70 [ 21.126075] ? __sys_setsockopt+0x131/0x210 [ 21.126533] ? packet_release+0xab0/0xab0 [ 21.127004] __sys_setsockopt+0x131/0x210 [ 21.127449] ? kernel_accept+0x2f0/0x2f0 [ 21.127911] ? ret_from_fork+0x8/0x50 [ 21.128313] ? do_raw_spin_lock+0x11b/0x280 [ 21.128800] __x64_sys_setsockopt+0xba/0x150 [ 21.129271] ? lockdep_hardirqs_on+0x37f/0x560 [ 21.129769] do_syscall_64+0x9f/0x450 [ 21.130182] entry_SYSCALL_64_after_hwframe+0x49/0xbe We should allocate with __GFP_NOWARN to handle this. Cc: Kal Conley <kal.conley@dectris.com> Cc: Andrey Konovalov <andreyknvl@google.com> Fixes: fc62814d ("net/packet: fix 4gb buffer limit due to overflow check") Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 0b91bce1 ] Christoph reported a stall while peeking datagram with an offset when busy polling is enabled. __skb_try_recv_datagram() uses as the loop termination condition 'queue empty'. When peeking, the socket queue can be not empty, even when no additional packets are received. Address the issue explicitly checking for receive queue changes, as currently done by __skb_wait_for_more_packets(). Fixes: 2b5cd0df ("net: Change return type of sk_busy_loop from bool to void") Reported-and-tested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Dmitry Bogdanov authored
[ Upstream commit a7faaa0c ] TCP/UDP checksum validity was propagated to skb only if IP checksum is valid. But for IPv6 there is no validity as there is no checksum in IPv6. This patch propagates TCP/UDP checksum validity regardless of IP checksum. Fixes: 018423e9 ("net: ethernet: aquantia: Add ring support code") Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by:
Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit fae846e2 ] The device ID alone does not uniquely identify a device. Test both the vendor and device ID to make sure we don't mistakenly think some other vendor's 0xB410 device is a Digium HFC4S. Also, instead of the bare hex ID, use the same constant (PCI_DEVICE_ID_DIGIUM_HFC4S) used in the device ID table. No functional change intended. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Finn Thain authored
[ Upstream commit bb9e5c5b ] The bug that Stan reported is as follows. After a restart, a 16-bit NIC may be incorrectly identified as a 32-bit NIC and stop working. mac8390 slot.E: Memory length resource not found, probing mac8390 slot.E: Farallon EtherMac II-C (type farallon) mac8390 slot.E: MAC 00:00:c5:30:c2:99, IRQ 61, 32 KB shared memory at 0xfeed0000, 32-bit access. The bug never arises after a cold start and only intermittently after a warm start. (I didn't investigate why the bug is intermittent.) It turns out that memcpy_toio() is deprecated and memcmp_withio() also has issues. Replacing these calls with mmio accessors fixes the problem. Reported-and-tested-by:
Stan Johnson <userm57@yahoo.com> Fixes: 2964db0f ("m68k: Mac DP8390 update") Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Xin Long authored
[ Upstream commit 1c87e79a ] Jianlin reported a crash: [ 381.484332] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068 [ 381.619802] RIP: 0010:fib6_rule_lookup+0xa3/0x160 [ 382.009615] Call Trace: [ 382.020762] <IRQ> [ 382.030174] ip6_route_redirect.isra.52+0xc9/0xf0 [ 382.050984] ip6_redirect+0xb6/0xf0 [ 382.066731] icmpv6_notify+0xca/0x190 [ 382.083185] ndisc_redirect_rcv+0x10f/0x160 [ 382.102569] ndisc_rcv+0xfb/0x100 [ 382.117725] icmpv6_rcv+0x3f2/0x520 [ 382.133637] ip6_input_finish+0xbf/0x460 [ 382.151634] ip6_input+0x3b/0xb0 [ 382.166097] ipv6_rcv+0x378/0x4e0 It was caused by the lookup function __ip6_route_redirect() returns NULL in fib6_rule_lookup() when ip6_create_rt_rcu() returns NULL. So we fix it by simply making ip6_create_rt_rcu() return ip6_null_entry instead of NULL. v1->v2: - move down 'fallback:' to make it more readable. Fixes: e873e4b9 ("ipv6: use fib6_info_hold_safe() when necessary") Reported-by:
Jianlin Shi <jishi@redhat.com> Suggested-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
Matteo Croce authored
[ Upstream commit c22da366 ] Similarly to commit a7603ac1 ("geneve: change NET_UDP_TUNNEL dependency to select"), GTP has a dependency on NET_UDP_TUNNEL which makes impossible to compile it if no other protocol depending on NET_UDP_TUNNEL is selected. Fix this by changing the depends to a select, and drop NET_IP_TUNNEL from the select list, as it already depends on NET_UDP_TUNNEL. Signed-off-by:
Matteo Croce <mcroce@redhat.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit ceabee6c ] In genl_register_family(), when idr_alloc() fails, we forget to free the memory we possibly allocate for family->attrbuf. Reported-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit e0aa6770 ] When a dual stack dccp listener accepts an ipv4 flow, it should not attempt to use an ipv6 header or inet6_iif() helper. Fixes: 3df80d93 ("[DCCP]: Introduce DCCPv6") Signed-off-by:
-
