- 29 Jan, 2018 2 commits
-
-
Mauro Carvalho Chehab authored
The XC2028_I2C_FLUSH only needs to be implemented on a few devices. Others can safely ignore it. That prevents filling the dmesg with lots of messages like: dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 Cc: stable@vger.kernel.org Fixes: 4d37ece7 ("[media] tuner/xc2028: Add I2C flush callback") Reported-by:
Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
Before this patch, when compiled for arm32, the signal strength were reported as: Lock (0x1f) Signal= 4294908.66dBm C/N= 12.79dB Because of a 32 bit integer overflow. After it, it is properly reported as: Lock (0x1f) Signal= -58.64dBm C/N= 12.79dB Cc: stable@vger.kernel.org Fixes: 0f91c9d6 ("[media] TS2020: Calculate tuner gain correctly") Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 23 Jan, 2018 18 commits
-
-
Arnd Bergmann authored
When built on a platform without gpiolib support, we run into a couple of compile errors in ov7740, including: drivers/media/i2c/ov7740.c: In function 'ov7740_set_power': drivers/media/i2c/ov7740.c:307:4: error: implicit declaration of function 'gpiod_direction_output'; did you mean 'gpio_direction_output'? [-Werror=implicit-function-declaration] gpiod_direction_output(ov7740->pwdn_gpio, 0); drivers/media/i2c/ov7740.c:914:4: error: 'GPIOD_OUT_HIGH' undeclared (first use in this function); did you mean 'GPIOF_INIT_HIGH'? Changing it to use the correct header file solves the problem. Fixes: 39c5c447 ("media: i2c: Add the ov7740 image sensor driver") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
Add nop variant of media_entity_cleanup. This allows calling media_entity_cleanup whether or not Media controller is enabled, simplifying driver code. Also drop #ifdefs on a few drivers around media_entity_cleanup(). Signed-off-by:
-
Hugues Fruchet authored
Time to time, stream on is failing with a strange positive error. Error code is returned erroneously by ov5640_set_ctrl_exposure() due to ov5640_get_vts() return value wrongly treated as error. Fix this by forcing ret to 0 after ov5640_get_vts() success call, in order that ret is set to success for rest of code sequence. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Yong Zhi authored
With "pages" initialized to vb length + 1 pages, the condition check if(!pages--) will break at one more page than intended, this can result in out-of-bound access to b->lop[i][j] when setting the last dummy page. Fixes: c7cbef1f ("media: intel-ipu3: cio2: fix a crash with out-of-bounds access") Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
Cao Bing Bu <bingbu.cao@intel.com> Signed-off-by:
-
Arnd Bergmann authored
My earlier patch missed two functions, these must be __maybe_unused as well: drivers/media/pci/intel/ipu3/ipu3-cio2.c:1867:12: error: 'cio2_runtime_resume' defined but not used [-Werror=unused-function] drivers/media/pci/intel/ipu3/ipu3-cio2.c:1849:12: error: 'cio2_runtime_suspend' defined but not used [-Werror=unused-function] Fixes: 2086dd35 ("media: intel-ipu3: cio2: mark PM functions as __maybe_unused") Signed-off-by:
-
Hans Verkuil authored
This directory contains the videobuf2 framework, so name the directory accordingly. The name 'videobuf' typically refers to the old and deprecated videobuf version 1 framework so that was confusing. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
-
Arnd Bergmann authored
The cobalt sound driver has a dependency on ALSA, but not on the PCM helper code, so this can lead to an extremely rare link error in randconfig builds: ERROR: "snd_pcm_period_elapsed" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "_snd_pcm_stream_lock_irqsave" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_hw_constraint_integer" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_set_ops" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_stream_unlock_irqrestore" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_lib_ioctl" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_new" [drivers/media/pci/cobalt/cobalt.ko] undefined! The other audio drivers select 'SND_PCM' for this, so let's do the same. Signed-off-by:
-
Arnd Bergmann authored
Without CONFIG_DMA_SHARED_BUFFER we run into a link error for the dma_buf_* APIs: ERROR: "dma_buf_map_attachment" [drivers/staging/media/tegra-vde/tegra-vde.ko] undefined! ERROR: "dma_buf_attach" [drivers/staging/media/tegra-vde/tegra-vde.ko] undefined! ERROR: "dma_buf_get" [drivers/staging/media/tegra-vde/tegra-vde.ko] undefined! ERROR: "dma_buf_put" [drivers/staging/media/tegra-vde/tegra-vde.ko] undefined! ERROR: "dma_buf_detach" [drivers/staging/media/tegra-vde/tegra-vde.ko] undefined! ERROR: "dma_buf_unmap_attachment" [drivers/staging/media/tegra-vde/tegra-vde.ko] undefined! Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Mention the maximum voltages of the CEC and HPD lines. Since in the example these lines are connected to a Raspberry Pi and the Rpi GPIO lines are 3.3V it is a good idea to warn against directly connecting the HPD to the Raspberry Pi's GPIO line. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: <stable@vger.kernel.org> # for v4.15 Signed-off-by:
-
Mauro Carvalho Chehab authored
As warned: drivers/media/i2c/dw9714.c: warning: incorrect type in initializer (different base types): => 64:19 Acked-by:
-
Sakari Ailus authored
The client field in driver's struct is redundant. Remove it. Signed-off-by:
Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by:
-
Sakari Ailus authored
Call pm_runtime_idle() at the end of the driver's probe() function to enable the device to reach low power state once probe() finishes. Signed-off-by:
-
Sean Young authored
The rc5 protocol does not have a leading pulse or space, but we encode the first bit using a single leading pulse. For other protocols, the leading pulse or space does not represent any bit. So, don't remove the first bit if a leading pulse is present. Cc: Antti Seppälä <a.seppala@gmail.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sean Young authored
The IR rc6 encoder sends the header using manchester encoding using 0 bits, which causes the following: UBSAN: Undefined behaviour in drivers/media/rc/rc-ir-raw.c:247:6 shift exponent 4294967295 is too large for 64-bit type 'long long unsigned int' So, allow the leader code to send a pulse and space and remove the unused pulse_space_start field. Cc: Antti Seppälä <a.seppala@gmail.com> Signed-off-by:
-
Sean Young authored
The ioctl change the current mode or return the current mode; they do not tell you which modes are possible (use the lirc features ioctl for that). Signed-off-by:
-
Sean Young authored
Since commit 9b619258 ("media: lirc: implement scancode sending"), and commit de142c32 ("media: lirc: implement reading scancode") the lirc features ioctl for raw IR devices advertises two modes for sending and receiving. The lirc daemon now fails to detect a raw IR device, both for transmit and receive. To fix this, do not advertise the scancode mode in the lirc features for raw IR devices (however do keep it for scancode devices). The mode can still be used via the LIRC_SET_{REC,SEND}_MODE ioctl. Signed-off-by:
-
Sean Young authored
Since commit a60d64b1 ("media: lirc: lirc interface should not be a raw decoder"), there is no lirc_dev module any more. On Ubuntu 16.10, the /etc/init.d/lirc startup script attempts to load the lirc_dev module. Since this module does not exist any more, this script fails. Add an alias so the correct module is loaded. Fixes: a60d64b1 ("media: lirc: lirc interface should not be a raw decoder") Signed-off-by:
-
Colin Ian King authored
The current error exit path if ir_raw_encode_scancode fails is via the label out_kfree which kfree's an uninitialized pointer txbuf. Fix this by exiting via a new exit path that does not kfree txbuf. Also exit via this new exit path for a failed allocation of txbuf to avoid a redundant kfree on a NULL pointer (to save a bunch of CPU cycles). Detected by: CoverityScan, CID#1463070 ("Uninitialized pointer read") Fixes: f81a8158 ("media: lirc: release lock before sleep") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 05 Jan, 2018 17 commits
-
-
Hugues Fruchet authored
Add RGB565 (LE & BE) and YUV422 YUYV format in addition to existing YUV422 UYVY format. Signed-off-by:
-
Hugues Fruchet authored
Add support of DVP parallel mode in addition of existing MIPI CSI mode. The choice between two modes and configuration is made through device tree. Signed-off-by:
-
Hugues Fruchet authored
Refine CSI-2 endpoint documentation and add bindings for DVP parallel interface support. Signed-off-by:
-
Hugues Fruchet authored
Verify that chip identifier is correct when probing. Signed-off-by:
-
Hugues Fruchet authored
Switch gpiod_set_value to gpiod_set_value_cansleep to avoid warnings when powering sensor. Signed-off-by:
-
Akinobu Mita authored
The mt9m111 has the test pattern generator features. This makes use of it through V4L2_CID_TEST_PATTERN control. Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
The mt9m111 driver requires clocks property for the master clock to the sensor, but there is no description for that. This adds it. Cc: Rob Herring <robh@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Akinobu Mita authored
Create a source pad and set the media controller type to the sensor. Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Akinobu Mita authored
Set the V4L2_SUBDEV_FL_HAS_DEVNODE flag for the subdevice so that the subdevice device node is created. Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Wenyou Yang authored
The ov7740 (color) image sensor is a high performance VGA CMOS image snesor, which supports for output formats: RAW RGB and YUV and image sizes: VGA, and QVGA, CIF and any size smaller. Signed-off-by:
Songjun Wu <songjun.wu@microchip.com> Signed-off-by:
Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by:
-
Wenyou Yang authored
Add the device tree binding documentation for the ov7740 sensor driver. Signed-off-by:
-
Dan Carpenter authored
Smatch complains that "err" can be uninitialized if we have a zero size write. The flow analysis is a little complicated so I'm not sure if that's possible or not, but it's harmless to set this to zero and it makes the code easier to read. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Yong Zhi authored
cio2 driver should release buffer with QUEUED state when start_stream op failed, wrong buffer state will cause vb2 core throw a warning. Signed-off-by:
-
Yong Zhi authored
When dmabuf is used for BLOB type frame, the frame buffers allocated by gralloc will hold more pages than the valid frame data due to height alignment. In this case, the page numbers in sg list could exceed the FBPT upper limit value - max_lops(8)*1024 to cause crash. Limit the LOP access to the valid data length to avoid FBPT sub-entries overflow. Signed-off-by:
-
Arnd Bergmann authored
The driver apparently assumes that the device uses the same page size as the CPU, but also assumes that this is 4096 bytes. On architectures with a larger page size like 65536 bytes, we get a warning about an integer overflow: drivers/media/pci/intel/ipu3/ipu3-cio2.c: In function 'cio2_fbpt_entry_init_dummy': arch/arm64/include/asm/page-def.h:28:20: error: large integer implicitly truncated to unsigned type [-Werror=overflow] #define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) ^ drivers/media/pci/intel/ipu3/ipu3-cio2.h:404:26: note: in expansion of macro 'PAGE_SIZE' #define CIO2_PAGE_SIZE PAGE_SIZE ^~~~~~~~~ drivers/media/pci/intel/ipu3/ipu3-cio2.c:172:3: note: in expansion of macro 'CIO2_PAGE_SIZE' CIO2_PAGE_SIZE / sizeof(u32) * CIO2_MAX_LOPS; Obviously this won't work, but the driver is also unlikely to ever be used on such an architecture, so the easiest workaround is to define the CIO2_PAGE_SIZE macro to the size that the hardware actually uses. Fixes: c2a6a07a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by: -
Arnd Bergmann authored
When CONFIG_PM is disabled, we get harmless warnings about the suspend/resume callbacks being unused: drivers/media/pci/intel/ipu3/ipu3-cio2.c:1993:12: error: 'cio2_resume' defined but not used [-Werror=unused-function] drivers/media/pci/intel/ipu3/ipu3-cio2.c:1967:12: error: 'cio2_suspend' defined but not used [-Werror=unused-function] This marks them as __maybe_unused to shut up the warnings. Fixes: c2a6a07a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by:
-
Sakari Ailus authored
The arr_size() macro which is used to calculate the size of the chunk in the array to be arranged resembles ARRAY_SIZE naming-wise. Avoid confusion by renaming it to CHUNK_SIZE instead. Also use min() macro to calculate the minimum of two numbers. Signed-off-by:
-
- 04 Jan, 2018 3 commits
-
-
Mauro Carvalho Chehab authored
Even on text and Kconfigs, what we do on media is to use tabs for indentation. Signed-off-by: -
Mauro Carvalho Chehab authored
There are a lot of places where sequences of space/tabs are found. Get rid of all spaces before tabs. Signed-off-by: -
Mauro Carvalho Chehab authored
On several places, whitespaces are being used for indentation, or even at the end of the line. Fix them. Signed-off-by:
-
