- 28 Feb, 2024 1 commit
-
-
Yang Wang authored
v1: enabel pp_od_clk_voltage node for gfx 9.4.3 SRIOV and BM. v2: add onevf check for gfx 9.4.3 v3: refine code check order to make function clearly. Signed-off-by:
Yang Wang <kevinyang.wang@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
- 27 Feb, 2024 5 commits
-
-
Alex Deucher authored
This reverts commit e490d60a. This causes hangs on SI when DC is enabled and errors on driver reboot and power off cycles. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3216 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2755Reviewed-by:
-
Srinivasan Shanmugam authored
This ensures that the memory mapped by ioremap for adev->rmmio, is properly handled in amdgpu_device_init(). If the function exits early due to an error, the memory is unmapped. If the function completes successfully, the memory remains mapped. Reported by smatch: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:4337 amdgpu_device_init() warn: 'adev->rmmio' from ioremap() not released on lines: 4035,4045,4051,4058,4068,4337 Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Missing break statement in the ATOM_ARG_IMM case of a switch statement, adds the missing break statement, ensuring that the program's control flow is as intended. Fixes the below: drivers/gpu/drm/amd/amdgpu/atom.c:323 atom_get_src_int() warn: ignoring unreachable code. Fixes: d38ceaf9 ("drm/amdgpu: add core driver (v4)") Cc: Jammy Zhou <Jammy.Zhou@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Lijo Lazar authored
On SOCs with SMUv13.0.6, mode-2 reset takes a bit longer. Wait for 200ms before trying to restore config space after mode-2 reset. Signed-off-by:
Asad Kamal <asad.kamal@amd.com> Signed-off-by:
-
Mario Limonciello authored
This vendor specific property has never been used by userspace software and conflicts with the panel_power_savings sysfs file. That is a compositor and user could fight over the same data. Fixes: 63d0b872 ("drm/amd/display: add panel_power_savings sysfs entry to eDP connectors") Suggested-by:
Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Cc: "Sun peng Li (Leo)" <Sunpeng.Li@amd.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
-
- 26 Feb, 2024 10 commits
-
-
Lijo Lazar authored
On devices which have multi-partition nodes, keep partition id in location_id[31:28]. Signed-off-by:
Jonathan Kim <jonathan.kim@amd.com> Signed-off-by:
-
Tim Huang authored
This patch fixes a MES firmware boot failure issue when backdoor loading the MES firmware. MES firmware runtime DRAM size is changed to 512k, the driver needs to reserve this amount of memory in FB, otherwise adjacent memory will be overwritten by the MES firmware startup code. Signed-off-by:
Tim Huang <Tim.Huang@amd.com> Reviewed-by:
Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by:
-
Prike Liang authored
Currently, GPU resets can now be performed successfully on the Raven series. While GPU reset is required for the S3 suspend abort case. So now can enable gpu reset for S3 abort cases on the Raven series. Signed-off-by:
Prike Liang <Prike.Liang@amd.com> Acked-by:
-
Ma Jun authored
It's unreasonable to use 0 as the power1_min_cap when OD is disabled. So, use the same lower limit as the value used when OD is enabled. Fixes: 19589468 ("drm/amd/pm: Support for getting power1_cap_min value") Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Acked-by:
-
Victor Lu authored
VF should not program this register. Signed-off-by:
Victor Lu <victorchengchi.lu@amd.com> Reviewed-by:
Zhigang Luo <Zhigang.Luo@amd.com> Signed-off-by:
-
Stanley.Yang authored
Check amdgpu_ras_mask to fix ineffective ras_mask setting due to special asic without sram ecc enable but with poison supported. Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Lijo Lazar authored
If fatal error is detected, packet submission won't go through. Return error in such cases. Also, avoid waiting for fence when fatal error is detected. Signed-off-by:
-
Lijo Lazar authored
For a RAS error that needs a full reset to recover, set the fatal error status. Clear the status once the device is reset. Signed-off-by:
-
Srinivasan Shanmugam authored
Adds a check in the map_hw_resources function to prevent a potential buffer overflow. The function was accessing arrays using an index that could potentially be greater than the size of the arrays, leading to a buffer overflow. Adds a check to ensure that the index is within the bounds of the arrays. If the index is out of bounds, an error message is printed and break it will continue execution with just ignoring extra data early to prevent the buffer overflow. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:79 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_stream_id' 6 <= 7 drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:81 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_plane_id' 6 <= 7 Fixes: 7966f319 ("drm/amd/display: Introduce DML2") Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Roman Li <roman.li@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Ma Jun authored
Don't set power state flag when system enter runtime suspend, or it may cause runtime resume failure issue. Fixes: 3a9626c8 ("drm/amd: Stop evicting resources on APUs in suspend") Signed-off-by:
-
- 22 Feb, 2024 24 commits
-
-
Melissa Wen authored
Use i2c adapter when there isn't aux_mode in dc_link to fix a null-pointer derefence that happens when running igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector detected as below: [ +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0 [ +0.000010] #PF: supervisor read access in kernel mode [ +0.000005] #PF: error_code(0x0000) - not-present page [ +0.000004] PGD 0 P4D 0 [ +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152 [ +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021 [ +0.000004] RIP: 0010:i2c_transfer+0xd/0x100 [ +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16 [ +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246 [ +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080 [ +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0 [ +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980 [ +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080 [ +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f [ +0.000004] FS: 00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0 [ +0.000003] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000006] <TASK> [ +0.000006] ? __die+0x23/0x70 [ +0.000011] ? page_fault_oops+0x17d/0x4c0 [ +0.000008] ? preempt_count_add+0x6e/0xa0 [ +0.000008] ? srso_alias_return_thunk+0x5/0x7f [ +0.000011] ? exc_page_fault+0x7f/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? i2c_transfer+0xd/0x100 [ +0.000010] drm_do_probe_ddc_edid+0xc2/0x140 [drm] [ +0.000067] ? srso_alias_return_thunk+0x5/0x7f [ +0.000006] ? _drm_do_get_edid+0x97/0x3c0 [drm] [ +0.000043] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000042] edid_block_read+0x3b/0xd0 [drm] [ +0.000043] _drm_do_get_edid+0xb6/0x3c0 [drm] [ +0.000041] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000043] drm_edid_read_custom+0x37/0xd0 [drm] [ +0.000044] amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu] [ +0.000153] drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper] [ +0.000000] __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper] [ +0.000000] ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu] [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper] [ +0.000000] status_store+0xb2/0x1f0 [drm] [ +0.000000] kernfs_fop_write_iter+0x136/0x1d0 [ +0.000000] vfs_write+0x24d/0x440 [ +0.000000] ksys_write+0x6f/0xf0 [ +0.000000] do_syscall_64+0x60/0xc0 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? syscall_exit_to_user_mode+0x2b/0x40 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ +0.000000] RIP: 0033:0x7f9ad46b4b00 [ +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89 [ +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00 [ +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009 [ +0.000000] RBP: 0000000000000002 R08: 0000000000000064 R09: 0000000000000000 [ +0.000000] R10: 0000000000000000 R11: 0000000000000202 R12: 00007f9ad48a7417 [ +0.000000] R13: 0000000000000009 R14: 00007ffcbd3bd760 R15: 0000000000000001 [ +0.000000] </TASK> [ +0.000000] Modules linked in: ctr ccm rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel btmtk bluetooth uvcvideo videobuf2_vmalloc sha3_generic videobuf2_memops uvc jitterentropy_rng videobuf2_v4l2 videodev drbg videobuf2_common ansi_cprng mc ecdh_generic ecc qrtr binfmt_misc hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio snd_ctl_led joydev hid_sensor_iio_common rtw89_8852ae rtw89_8852a rtw89_pci snd_hda_codec_realtek rtw89_core snd_hda_codec_generic intel_rapl_msr ledtrig_audio intel_rapl_common snd_hda_codec_hdmi mac80211 snd_hda_intel snd_intel_dspcfg kvm_amd snd_hda_codec snd_soc_dmic snd_acp3x_rn snd_acp3x_pdm_dma libarc4 snd_hwdep snd_soc_core kvm snd_hda_core cfg80211 snd_pci_acp6x snd_pcm nls_ascii snd_timer hp_wmi snd_pci_acp5x nls_cp437 snd_rn_pci_acp3x ucsi_acpi sparse_keymap ccp snd platform_profile snd_acp_config typec_ucsi irqbypass vfat sp5100_tco [ +0.000000] snd_soc_acpi fat rapl pcspkr wmi_bmof roles rfkill rng_core snd_pci_acp3x soundcore k10temp watchdog typec battery ac amd_pmc acpi_tad button hid_sensor_hub hid_multitouch evdev serio_raw msr parport_pc ppdev lp parport fuse loop efi_pstore configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic dm_crypt dm_mod efivarfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c crc32c_generic xor raid6_pq raid1 raid0 multipath linear md_mod amdgpu amdxcp i2c_algo_bit drm_ttm_helper ttm crc32_pclmul crc32c_intel drm_exec gpu_sched drm_suballoc_helper nvme ghash_clmulni_intel drm_buddy drm_display_helper sha512_ssse3 nvme_core ahci xhci_pci sha512_generic hid_generic xhci_hcd libahci rtsx_pci_sdmmc t10_pi i2c_hid_acpi drm_kms_helper i2c_hid mmc_core libata aesni_intel crc64_rocksoft_generic crypto_simd amd_sfh crc64_rocksoft scsi_mod usbcore cryptd crc_t10dif cec drm crct10dif_generic hid rtsx_pci crct10dif_pclmul scsi_common rc_core crc64 i2c_piix4 [ +0.000000] usb_common crct10dif_common video wmi [ +0.000000] CR2: 00000000000004c0 [ +0.000000] ---[ end trace 0000000000000000 ]--- Fixes: 0e859faf ("drm/amd/display: Remove unwanted drm edid references") Signed-off-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
-
Yifan Zhang authored
This patch is to add vcn 4.0.6 support Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
Ilpo Järvinen authored
Convert open coded RMW accesses for LNKCTL2 to use pcie_capability_clear_and_set_word() which makes its easier to understand what the code tries to do. LNKCTL2 is not really owned by any driver because it is a collection of control bits that PCI core might need to touch. RMW accessors already have support for proper locking for a selected set of registers (LNKCTL2 is not yet among them but likely will be in the future) to avoid losing concurrent updates. Acked-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by:
-
Kunwu Chan authored
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create to simplify the creation of SLAB caches. Reviewed-by:
Kunwu Chan <chentao@kylinos.cn> Signed-off-by:
-
Veerabadhran Gopalakrishnan authored
Enabled the VCN Power Gating and Clock Gating flags for VCN 4.0.6. Reviewed-by:
Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
The is_psr_su parameter is a boolean flag indicating whether the Panel Self Refresh Selective Update (PSR SU) feature is enabled which is a power-saving feature that allows only the updated regions of the screen to be refreshed, reducing the amount of data that needs to be sent to the display. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5257: warning: Function parameter or member 'is_psr_su' not described in 'fill_dc_dirty_rects' Fixes: d16df040 ("drm/amdgpu: make damage clips support configurable") Cc: stable@vger.kernel.org Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Ilpo Järvinen authored
Convert open coded RMW accesses for LNKCTL2 to use pcie_capability_clear_and_set_word() which makes its easier to understand what the code tries to do. LNKCTL2 is not really owned by any driver because it is a collection of control bits that PCI core might need to touch. RMW accessors already have support for proper locking for a selected set of registers (LNKCTL2 is not yet among them but likely will be in the future) to avoid losing concurrent updates. Acked-by:
-
Armin Wolf authored
After destroying dmub_srv, the memory associated with it is not freed, causing a memory leak: unreferenced object 0xffff896302b45800 (size 1024): comm "(udev-worker)", pid 222, jiffies 4294894636 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 6265fd77): [<ffffffff993495ed>] kmalloc_trace+0x29d/0x340 [<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu] [<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu] [<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu] [<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu] [<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu] [<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90 [<ffffffff996918a3>] pci_device_probe+0xc3/0x230 [<ffffffff99805872>] really_probe+0xe2/0x480 [<ffffffff99805c98>] __driver_probe_device+0x78/0x160 [<ffffffff99805daf>] driver_probe_device+0x1f/0x90 [<ffffffff9980601e>] __driver_attach+0xce/0x1c0 [<ffffffff99803170>] bus_for_each_dev+0x70/0xc0 [<ffffffff99804822>] bus_add_driver+0x112/0x210 [<ffffffff99807245>] driver_register+0x55/0x100 [<ffffffff990012d1>] do_one_initcall+0x41/0x300 Fix this by freeing dmub_srv after destroying it. Fixes: 743b9786 ("drm/amd/display: Hook up the DMUB service in DM") Signed-off-by:Armin Wolf <W_Armin@gmx.de> Signed-off-by:
-
Lenko Donchev authored
We are trying to get rid of all multiplications from allocation functions to prevent integer overflows. Here the multiplication is obviously safe, but using kcalloc() is more appropriate and improves readability. This patch has no effect on runtime behavior. Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Link: https://github.com/KSPP/linux/issues/162Reviewed-by:
Lenko Donchev <lenko.donchev@gmail.com> Signed-off-by:
-
Kunwu Chan authored
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create to simplify the creation of SLAB caches. Reviewed-by:
-
Kunwu Chan authored
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create to simplify the creation of SLAB caches. Reviewed-by:
-
Veerabadhran Gopalakrishnan authored
Updated Query Video codecs for VCN 406 Reviewed-by:
-
Veerabadhran Gopalakrishnan authored
Modified driver to use the appropriate FW files and instance. v2: squash in fixes (Alex) Reviewed-by:
-
Saleemkhan Jamadar authored
Enable support for multi instance on JPEG 4.0.6. v2: squash in fixes (Alex) Signed-off-by:
Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by:
-
Jonathan Kim authored
Prevent dropping the KFD process reference at the end of a debug IOCTL call where the acquired process value is an error. Signed-off-by:
Felix Kuehling <felix.kuehling@amd.com> Signed-off-by:
-
Victor Lu authored
Under SRIOV, programming to VM_CONTEXT*_CNTL regs failed because the current macro does not pass through the correct xcc instance. Use the *REG32_XCC macro in this case. The behaviour without SRIOV is the same without this patch. Signed-off-by:
-
Victor Lu authored
IH_CHICKEN is blocked for VF writes; this access should be skipped. Signed-off-by:
-
Victor Lu authored
The current error detection only looks for a timeout. This should be changed to also check scratch_reg1 for any errors returned from RLCG. v2: remove new error value Signed-off-by:
-
Yifan Zhang authored
This patch to enable MES for GC 11.5.1 Reviewed-by:
shaoyun.liu <Shaoyun.liu@amd.com> Signed-off-by:
-
Yifan Zhang authored
This patch to add GC 11.5.1 support Signed-off-by:
-
Yifan Zhang authored
Enable KFD for GC 11.5.1. Signed-off-by:
-
Tim Huang authored
Enable CGPG support for GFX ip v11.5.1 Signed-off-by:
-
Yifan Zhang authored
Initialize gfx 11.5.0 and set gfx hw configuration. v2: squash in CG, PG, GFXOFF fixes (Alex) Signed-off-by:
-
Yifan Zhang authored
This patch to add MES PIPE0 and PIPE1 firmware support for gc_11_5_1. Signed-off-by:
-
